Performance Characteristics of Automobile Air Conditioning Using the R134a/R1234yf Mixture.

In this study, the energy and exergy of an automobile refrigeration system using R134a and R134a/R1234yf were analyzed experimentally with respect to outdoor air temperature and compressor speed. As outdoor air temperature increased from 32.5 °C to 37.5 °C, the coefficient of performance (COP) and total exergy destruction rate of the refrigeration system using Mix30 decreased by 5.19% and 25.8% on average, compared to that of the system using R134a. The exergy efficiency of the Mix30 refrigeration system was on average 21.8% higher than that of the R134a system. As the compressor rotating speed increased from 1000 to 2000 rpm, the cooling capacity of the refrigeration system using R134a and R134a/R1234yf increased, while the COP decreased. The COP and total exergy destruction rate of the refrigeration system using Mix30 decreased by 4.82% and 19.5%, compared to that of the system using R134a. The exergy efficiency of the Mix30 refrigeration system increased on average by 20.7%, compared to that of the R134a system. The total exergy destruction rate of the automobile refrigeration system using R134a/R1234yf decreased with increase in R1234yf, while exergy efficiency increased. In addition, the exergy destruction rate of the automobile refrigeration system decreased as the amount of R1234yf in the R134a/R1234yf automobile refrigeration system increased.

Life cycle cost and environmental assessment for resource-oriented toilet systems.

The rich content of nutrients in human waste provides an outlook for turning it from pollutants to potential resources. The pilot-scale resource-oriented toilet with forward osmosis technology was demonstrated to have advantages to recover clean water, nitrogen, phosphorus, potassium, biogas, and heat from urine and feces. For the possibility of further full-scale implementation in different scenarios, six resource-oriented toilet systems and one conventional toilet system were designed in this study. The methodology of cost-benefit analysis and life cycle assessment were applied to analyze the life cycle economic feasibility and environmental sustainability of these systems. As results indicated, resource-oriented toilets with forward osmosis technology concentrating urine proved to have both economic and environmental benefit. The economic net present value results of new resource-oriented toilets were much better than conventional toilet. The energy consumption in resource-oriented toilets contributes a lot to the environmental impacts while resource recovery such as the fertilizer production and fresh water harvest in resource-oriented toilet systems offsets a lot. Taking both life cycle economic feasibility and environmental sustainability into consideration, the partial resource-oriented toilet (only recovering nutrients from urine) is the best choice, and the totally independent resource-oriented toilet could be applied to replace conventional toilets in areas without any external facilities such as sewer and water supply system etc.

Towards a methodology to formulate sustainable diets for livestock: accounting for environmental impact in diet formulation.

The objective of this study was to develop a novel methodology that enables pig diets to be formulated explicitly for environmental impact objectives using a Life Cycle Assessment (LCA) approach. To achieve this, the following methodological issues had to be addressed: (1) account for environmental impacts caused by both ingredient choice and nutrient excretion, (2) formulate diets for multiple environmental impact objectives and (3) allow flexibility to identify the optimal nutritional composition for each environmental impact objective. An LCA model based on Canadian pig farms was integrated into a diet formulation tool to compare the use of different ingredients in Eastern and Western Canada. By allowing the feed energy content to vary, it was possible to identify the optimum energy density for different environmental impact objectives, while accounting for the expected effect of energy density on feed intake. A least-cost diet was compared with diets formulated to minimise the following objectives: non-renewable resource use, acidification potential, eutrophication potential, global warming potential and a combined environmental impact score (using these four categories). The resulting environmental impacts were compared using parallel Monte Carlo simulations to account for shared uncertainty. When optimising diets to minimise a single environmental impact category, reductions in the said category were observed in all cases. However, this was at the expense of increasing the impact in other categories and higher dietary costs. The methodology can identify nutritional strategies to minimise environmental impacts, such as increasing the nutritional density of the diets, compared with the least-cost formulation.

Application of an integrated loach-plant-substrate-microbes non-aerated saturated vertical flow constructed wetlands: Mechanisms of pollutants removal and greenhouse gases reduction.

This study established an integrated loach-plant-substrate-microbes non-aerated saturated vertical flow constructed wetlands (VFCWs) to enhance pollutants removal efficiencies and reduce greenhouse gas emissions simultaneously. The results of the VFCWs experiment indicated that the removal efficiencies of chemical oxygen demand, total phosphorous, and total nitrogen in loach systems were significantly higher than those of non-loach systems, achieving 59.16%, 35.98%, and 40.96%, respectively. The CH4 and N2O emission fluxes were also significantly reduced in the integrated system, resulting in lower global warming potential (GWP) and GWP per unit of pollutants removal. Loaches promoted the transportation of oxygen, facilitated the re-contact and utilization of sediments, reduced CH4 emission, and enhanced nitrogen conversion and phosphorus accumulation. Increased bioavailable carbon and nitrate-nitrogen in the integrated system improved the abundance of denitrifying bacteria, which supported complete denitrification, reducing N2O emissions with high pollutant removal.

Energy and environmental sustainability of waste personal protective equipment (PPE) treatment under COVID-19.

Combating the COVID-19 pandemic has raised the demand for and disposal of personal protective equipment in the United States. This work proposes a novel waste personal protective equipment processing system that enables energy recovery through producing renewable fuels and other basic chemicals. Exergy analysis and environmental assessment through a detailed life cycle assessment approach are performed to evaluate the energy and environmental sustainability of the processing system. Given the environmental advantages in reducing 35.42% of total greenhouse gas emissions from the conventional incineration and 43.50% of total fossil fuel use from landfilling processes, the optimal number, sizes, and locations of establishing facilities within the proposed personal protective equipment processing system in New York State are then determined by an optimization-based site selection methodology, proposing to build two pre-processing facilities in New York County and Suffolk County and one integrated fast pyrolysis plant in Rockland County. Their optimal annual treatment capacities are 1,708 t/y, 8,000 t/y, and 9,028 t/y. The proposed optimal personal protective equipment processing system reduces 31.5% of total fossil fuel use and 35.04% of total greenhouse gas emissions compared to the personal protective equipment incineration process. It also avoids 41.52% and 47.64% of total natural land occupation from the personal protective equipment landfilling and incineration processes.

Optimizing emissions and carbon credit from integrated solid waste and wastewater management: A MATLAB-based model with a Graphical User Interface (v1).

A new Solid Waste and Wastewater (SWW) management software is presented for optimizing the life-cycle of emissions with carbon credit cost considerations. The software is the first to combine integrated solid waste and wastewater management systems under a single framework when introducing a food waste disposer (FWD) policy. The model/software offers a platform encompassing several tools for life cycle emissions accounting, optimization, as well as economic, policy, and sensitivity analysis. It provides the flexibility of selecting processes or modifying input parameters, as well as disaggregating emissions depending on the scope of accounting. The graphical user interface is applicable in the context of developed and developing economies with the ultimate objective to assist decision makers to allocate expenditures for emissions mitigation measures.

How can we improve the environmental sustainability of poultry production?

The review presents results of recent life cycle assessment studies aiming to quantify and improve the environmental performance of UK poultry production systems, including broiler meat, egg and turkey meat production. Although poultry production has been found to be relatively environmentally friendly compared with the production of other livestock commodities, it still contributes to environmental impacts, such as global warming, eutrophication and acidification. Amongst different sub-processes, feed production and transport contributes about 70 % to the global warming potential of poultry systems, whereas manure management contributes about 40-60 % to their eutrophication potential and acidification potential, respectively. All these impacts can be reduced by improving the feed efficiency, either by changing the birds through genetic selection or by making the feed more digestible (e.g. by using additives such as enzymes). However, although genetic selection has the potential to reduce the resources needed for broiler production (including feed consumption), the changing need of certain feed ingredients, most notably protein sources as a result of changes in bird requirements may limit the benefits of this strategy. The use of alternative feed ingredients, such as locally grown protein crops and agricultural by-products, as a replacement of South American grown soya, can potentially also lead to improvements in several environmental impact categories, as long as such feeding strategies have no negative effect on bird performance. Other management options, such as improving poultry housing and new strategies for manure management have also the potential to further improve the environmental sustainability of the poultry industries in Europe.