Polyether-Thiourea-Siloxane Copolymer Based on H-Bonding Interaction for Marine Antifouling.

By introducing thiourea and ether groups into MQ silicone resin polymer via free radical polymerization, a polyether-thiourea-siloxane (PTS) copolymer was synthesized. The characterization of the synthesized copolymer indicated the occurrence of H-bonding interactions and a narrow molecular weight polydispersity index. Antifouling coatings were produced by incorporating the synthesized copolymer and phenylmethylsilicone oil (PSO). The addition of a minute amount of copolymer enhanced the hydrophobicity of the coating by increasing its surface roughness. However, excessive addition of copolymer resulted in a significant deterioration of the coating surface smoothness. The copolymer improved the mechanical properties of the coating, but excessive addition decreased the crosslinking density and weakened the mechanical performance. With increasing copolymer addition, the leaching of PSO was significantly improved due to the change in the storage form of PSO in the coating caused by the copolymer. Based on the H-bonding interaction of the copolymer, the adhesion strength between the coating and the substrate was significantly improved. However, excessive addition of copolymer did not infinitely enhance the adhesion strength. The antifouling performance demonstrated that an appropriate amount of copolymer could obtain adequate PSO leaching efficiency, thereby effectively enhancing the antifouling performance of the coating. In this study, the prepared coating P12 (12 g of PTS in 100 g of PDMS) showed the most effective antifouling performance.

Deliver on a Promise: Hydrogen-Bonded Polymer Nanomedicine with a Precise Ratio of Chemodrug and Photosensitizer for Intelligent Cancer Therapy.

The outcomes of combined cancer therapy are largely related to loading content and contribution of each therapeutic agent; however, fine-tuning the ratio of two coloaded components toward precise cancer therapy is a great challenge and still remains in its infancy. We herein develop a supramolecular polymer scaffold to optimize the coloading ratio of chemotherapeutic agent and photosensitizer through hydrogen-bonding (H-bonding) interaction, for maximizing the efficacy of intelligent cancer chemo/photodynamic therapies (CT/PDT). To do so, we first synthesize a thymine (THY)-functionalized tetraphenylporphyrin photosensitizer (i.e., TTPP), featuring the same molecular configuration of H-bonding array with chemotherapeutic carmofur (e.g., 1-hexylcarbamoyl-5-fluorouracil, HCFU). Meanwhile, a six-arm star-shaped amphiphilic polymer vehicle P(DAPA-co-DPMA-co-OEGMA)6 (poly(diaminopyridine acrylamide-co-2-(diisopropylamino)ethyl methacrylate-co-oligo(ethylene glycol) monomethyl ether methacrylate)6) is prepared, bearing hydrophilic and biocompatible POEGMA segment, along with hydrophobic PDAPA and PDPMA segments, characterizing the randomly dispersed dual functionalities, i.e., heterocomplementary H-bonding DAP motifs and pH-responsive protonation DPMA content. Thanks to the identical DAP/HCFU and DAP/TTPP H-bonding association capability, the incorporation of both HCFU and TTPP to six-arm star-shaped P(DAPA-co-DPMA-co-OEGMA)6 vehicle, with an optimized coloading ratio, can be straightforwardly realized by adjusting the feeding concentrations, thus yielding the hydrogen-bonded supramolecular nanoparticles (i.e., HCFU-TTPP-SPNs), demonstrating the codelivery of two components with the promise to optimize the combined CT/PDT efficacy.

Effect of isopropyl side chain branching and different anions on electronic structure, vibrational spectra, and hydrogen bonding of isopropyl-imidazolium-based ionic liquids: Experimental and theoretical investigations.

In the present work, four branched methylated, 1,2-dimethyl-3-isopropyl-imidazolium (i-[C3Dmim+]) and protonated,1-methyl-3-isopropyl-imidazolium (i-[C3mim+])-based ionic liquids (ILs) with varying anion (Br-, BF4-, PF6-, and NTf2-) were synthesized and investigated by NMR, infrared (IR) and Raman spectroscopy. Based on infrared and Raman spectroscopy, complete vibrational assignments have been performed. The IR and Raman analysis revealed that the vibrational spectra are virtually unaffected upon methylation, while significant frequency changes were observed by changing anion. Furthermore, to determine the electronic structure, energetic stability, and vibrational properties of these i-[C3Dmim]Y, i-[C3mim]Y (Y = Br, BF4, PF6, and NTf2) ion pairs, quantum chemical calculations including the dispersion correction method are performed both on single ions and on ionic couples. The calculated electron density was analyzed to expose non-covalent intra- and interionic interactions by the quantum theory of atoms in molecules (AIM) and interpreted in terms of both anion dependence and type of interaction. Computational results suggest that for all ionic couples the most energetically stable configuration is obtained with the anions located close to the C2 position of the imidazolium cation. However, in the case of i-[C3mim]NTf2 and i-[C3Dmim]BF4, similar energies were obtained in configurations 2 and 3 where the anion is located above the imidazolium ring. For i-[C3mim]Br a stronger hydrogen bond is predicted than for other studied ILs. Calculations indicate that a red shift of the CH stretching bands should occur due to hydrogen bonding; indeed, such displacement of bands is experimentally observed.

Polar zwitterion/saccharide-based deep eutectic solvents for cellulose processing.

Liquid zwitterions are biocompatible cellulose solvents and have enabled successive ethanol production from plant biomass in the same reaction pot. However, only a few carboxylate-type liquid zwitterions have been reported since almost all zwitterions are solid. Here, we propose zwitterion-based deep eutectic solvents (DESs) to expand the choices of zwitterionic solvents for cellulose dissolution and the subsequent processing. Zwitterion-based DESs were prepared by mixing four types of saccharide at various ratios. Twenty-two combinations of zwitterion/saccharide mixtures formed DESs, that is, liquid state below 100 °C. Two of them, whose saccharide ratio were 5 wt%, successfully dissolved cellulose because the low saccharide load was sufficient for liquefaction but did not disrupt the intrinsic cellulose dissolution ability of zwitterions.

A Tetradentate Phosphonate Ligand-based Ni-MOF as a Support for Designing High-performance Proton-conducting Materials.

Developing a robust metal-organic framework (MOF) which facilitates proton hopping along the pore channels is very demanding in the context of fabricating an efficient proton-conducting membrane for fuel cells. Herein, we report the synthesis of a novel tetradentate aromatic phosphonate ligand H8 L (L=tetraphenylethylene tetraphosphonic acid) based Ni-MOF, whose crystal structure has been solved from single-crystal X-ray diffraction. Ni-MOF [Ni2 (H4 L)(H2 O)9 (C2 H7 SO)(C2 H7 NCO)] displays a monoclinic crystal structure with a space group of P 21 /c, a=11.887 Å, b=34.148 Å, c=11.131 Å, α=γ=90°, ß=103.374°, where a nickel-hexahydrate moiety located inside the void space of the framework through several H-bonding interactions. Upon treatment of the Ni-MOF in different pH media as well as solvents, the framework remained unaltered, suggesting the presence of strong H-bonding interactions in the framework. High framework stability of Ni-MOF bearing H-bonding interactions motivated us to explore this metal-organic framework material as proton-conducting medium after external proton doping. Due to the presence of a large number of H-bonding interactions and the presence of water molecules in the framework we have carried out the doping of organic p-toluenesulfonic acid (PTSA) and inorganic sulphuric acid (SA) in this Ni-MOF and observed high proton conductivity of 5.28×10-2  S cm-1 at 90 °C and 98% relative humidity for the SA-doped material. Enhancement of proton conductivity by proton doping under humid conditions suggested a very promising feature of this Ni-MOF.

Temperature sensor probe based on intramolecular charge transfer (ICT) & reversible solute-solvent interaction in solution.

In this present work, we have developed a temperature sensitive ICT probe (KNP) to investigate alternation of ICT process with the temperature in polar protic solvents. The H-bonding interaction is found to play a key role on solute-solvent interaction to become a temperature sensitive ICT probe in solution. From temperature dependent UV-Vis spectra, it is cleared that the solute-solvent interaction is reversible in nature with temperature and affected by concentration in polar protic solvents. The reversible solute-solvent interaction is observed by monitoring the intensity variation of intramolecular charge transfer (ICT) band with temperature in solution.

Evidence of C--F-P and aromatic π--F-P weak interactions in imidazolium ionic liquids and its consequences.

A simple change from alkyl group to alkene in side chain of imidazolium cation with same anion resulted in a drastic impact on physical properties (e.g., melting point) from bmimPF6 IL to cmimPF6 IL. The underlying reasons have been elucidated by structural and interaction studies with the help of DSC, SCXRD, vibrational and multi-nuclear NMR spectroscopic techniques. Experiments reveal existence of new weak interactions involving the carbon and π cloud of the imidazolium aromatic ring with fluoride of PF6 anion (i.e., C2--F-P and π--F-P) in cmimPF6 but are absent in structurally similar prototype IL, bmimPF6. Though weak, these interactions helped to form ladder type supramolecular arrangement, resulting in quite high melting point for cmimPF6 IL compared to bmimPF6 IL. These findings emphasize that an IL system can behave uniquely because of the existence of uncommon weak interactions.

Raman and FTIR spectroscopic studies on two hydroxylated tung oils (HTO) bearing conjugated double bonds.

Tung oil (TO) was used as a model compound to study two hydroxylated tung oils (HTO), prepared from TO by either aminolysis (HTO-am) or alcoholysis (HTO-al). Main bands in Raman and FTIR spectra were initially assigned based on the detailed analysis of the compound spectra before and after exposure to elevated temperature (200°C). The effect of heat treatment in air on spectral bands, and especially on the changes associated with double bonds, were then investigated. In the present work, changes in spectral bands due to heat treatment were compared with those revealed in the previous work of others. The results show that the conjugated triene structure of TO has been retained during alcoholysis and aminolysis, to yield the HTOs studied; yet the change of the triene structure caused by heating is different among the three samples; the H-bonding strength between OH and CO in HTO-am is higher than that in HTO-al; the changes in HTO vOH and vCO bands in FTIR caused by the present heat treatment were significant; for TO, there is a big difference between changes in spectra as caused by thermal exposure, compared to those caused by ageing under UV light or exposure to a catalyst. The present work has laid additional groundwork for further study of the reactions of such triply conjugated double bond structures under different ageing conditions.

The Clusters-in-a-Liquid Approach for Solvation: New Insights from the Conformer Specific Gas Phase Spectroscopy and Vibrational Optical Activity Spectroscopy.

Vibrational optical activity spectroscopies, namely vibrational circular dichroism (VCD) and Raman optical activity (ROA), have been emerged in the past decade as powerful spectroscopic tools for stereochemical information of a wide range of chiral compounds in solution directly. More recently, their applications in unveiling solvent effects, especially those associated with water solvent, have been explored. In this review article, we first select a few examples to demonstrate the unique sensitivity of VCD spectral signatures to both bulk solvent effects and explicit hydrogen-bonding interactions in solution. Second, we discuss the induced solvent chirality, or chiral transfer, VCD spectral features observed in the water bending band region in detail. From these chirality transfer spectral data, the related conformer specific gas phase spectroscopic studies of small chiral hydration clusters, and the associated matrix isolation VCD experiments of hydrogen-bonded complexes in cold rare gas matrices, a general picture of solvation in aqueous solution emerges. In such an aqueous solution, some small chiral hydration clusters, rather than the chiral solutes themselves, are the dominant species and are the ones that contribute mainly to the experimentally observed VCD features. We then review a series of VCD studies of amino acids and their derivatives in aqueous solution under different pHs to emphasize the importance of the inclusion of the bulk solvent effects. These experimental data and the associated theoretical analyses are the foundation for the proposed "clusters-in-a-liquid" approach to account for solvent effects effectively. We present several approaches to identify and build such representative chiral hydration clusters. Recent studies which applied molecular dynamics simulations and the subsequent snapshot averaging approach to generate the ROA, VCD, electronic CD, and optical rotatory dispersion spectra are also reviewed. Challenges associated with the molecular dynamics snapshot approach are discussed and the successes of the seemingly random "ad hoc explicit solvation" reported before are also explained. To further test and improve the "clusters-in-a-liquid" model in practice, future work in terms of conformer specific gas phase spectroscopy of sequential solvation of a chiral solute, matrix isolation VCD measurements of small chiral hydration clusters, and more sophisticated models for the bulk solvent effects would be highly valuable.