Computational exploration of compounds in Xylocarpus granatum as a potential inhibitor of Plasmodium berghei using docking, molecular dynamics, and DFT studies.

Malaria remains a global health concern, with the emergence of resistance to the antimalarial drug atovaquone through cytochrome b (cyt b) being well-documented. This study was prompted by the presence of this mutation in cyt b to enable new drug candidates capable of overcoming drug resistance. Our objective was to identify potential drug candidates from compounds of Xylocarpus granatum by computationally assessing their interactions with Plasmodium berghei cyt b. Using computational methods, we modeled cyt b (GenBank: AF146076.1), identified the binding cavity, and analyzed the Ramachandran plot against cyt b. Additionally, we conducted drug-likeness and absorption, distribution, metabolism, excretion, and toxicity (ADMET) studies, along with density functional theory (DFT) analysis of the compounds. Molecular docking and molecular dynamics simulation (MDS) were used to evaluate the binding energy and stability of the cyt b-ligand complex. Notably, our investigation highlighted kaempferol as a promising compound due to its high binding energy of 7.67 kcal/mol among all X. granatum compounds, coupled with favorable pharmacological properties (ADMET) and antiprotozoal properties at Pa 0.345 > Pi 0.009 (PASS value). DFT analysis showed that kaempferol has an energy gap of 4.514 eV. MDS indicated that all tested ligands caused changes in bonding and affected the structural conformation of cyt b, as observed before MDS (0 ns) and after MDS (100 ns). The most notable differences were observed in the types of hydrogen bonds between 0 and 100 ns. Nevertheles, MDS results from a 100 ns simulation revealed consistent behavior for kaempferol across various parameters including root mean square deviation (RMSD), root mean square fluctuation (RMSF), radius of gyration (Rg), solvent-accessible surface area (SASA), molecular mechanics-Poisson Boltzmann surface area (MM-PBSA), and hydrogen bonds. The cyt b-kaempferol complex demonstrated favorable energy stability, as supported by the internal energy distribution values observed in principal component analysis (PCA), which closely resembled those of the atovaquone control. Additionally, trajectory stability analysis indicated structural stability, with a cumulative eigenvalue of 24.7 %. Dynamic cross-correlation matrix (DCCM) analysis revealed a positive correlation among catalytic cytochrome residues within the amino acid residues range 119-268. The results of our research indicate that the structure of kaempferol holds promise as a potential candidate against Plasmodium.

Endowing the Operability of Supercapacitors at High Temperatures by Regulating the Solvation Structure in Dilute Hybrid Electrolyte with Trimethyl Phosphate Cosolvent.

The redox stabilities of different oxygen donor solvents (C═O, P═O and S═O) and lithium salt anions for supercapacitors (SCs) electrolytes have been compared by calculating the frontier molecular orbital energy. Among six lithium difluoro(oxalate)borate (LiDFOB)-based mono-solvent electrolytes, the dilute LiDFOB-1,4-butyrolactone (GBL) electrolyte exhibits the highest operating voltage but suffers from electrolyte breakdown at elevated temperatures. Trimethyl phosphate (TMP) exhibits the highest redox stability and a strongly negative electrostatic potential (ESP), making it suitable for promoting the dissolution of LiDFOB as expected. Therefore, TMP is selected as a co-solvent into LiDFOB-GBL electrolyte to regulate Li+ solvation structure and improve the operability of electrolytes at high temperatures. The electrochemical stable potential window (ESPW) of 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte can reach 5.230 V. The activated carbon (AC)-based symmetric SC using 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte achieves a high energy density of 54.2 Wh kg-1 at 1.35 kW kg-1 and the capacitance retention reaches 89.2% after 10 000 cycles. The operating voltage of SC can be maintained above 2 V when the temperature rises to 60 °C.

The Journey for the Synthesis of Large Acenes.

Acenes, the group of polycyclic aromatic hydrocarbons (PAHs) with linearly fused benzene rings, possess distinctive electronic properties with potential applicability in material science. Hexacene was the largest acene obtained and characterized in the last century, followed by heptacene in 2006. Since then, a race for obtaining the largest acene resulted in the development of several members of this family as well as diverse innovative synthetic strategies, from solid-state chemistry to the promising on-surface chemistry. This last technique allows the obtention of large acenes, up to tridecacene, the largest acene so far. This review presents the different methodologies employed for the synthesis of acenes, highlighting the newest studies, to provide a much more thorough understanding of the essence of the electronic structure of this captivating group of organic compounds.

Molecular Engineering for UV-Vis to NIR Absorption/Emission Bands of Pyrazine-based A-π-D- π-A Switches to Design TiO2 Tuned Dyes: DFT Insights.

This study investigates the tuning of the UV-Vis/NIR absorption bands of pyrazine-based A-D-A switches for designing efficient UV retardancy over TiO2 surfaces. The electronic properties and optical characteristics of seven dyes (DP1-DP7) were analyzed using computational methods. The results indicate that the dyes possessed distinct UV-Vis/NIR absorption properties. Their absorption wavelengths ranged from 389 to 477 nm, with corresponding energies ranging from 2.59 to 3.19 eV. The major contributions to the absorption were found to be the HOMO-LUMO transitions, varying from 86 to 96%. The dyes exhibited different donor (D) and acceptor (A) groups, influencing their electronic properties and absorption characteristics. The tunable electronic and optical properties of these dyes make them promising candidates for applications requiring UV protection for TiO2-based materials. The results contribute to understand the structure-property relationships in the design of UV-Vis/NIR absorbers and provide a foundation for further experimental investigations in the field of UV retardancy.

Exploring Carbon Monoxide and Carbon Dioxide Adsorption on (5,5) Aluminum Nitride Nanotubes for Enhanced Sensor Applications: A DFT Study.

This study examined the sensitivity of single-walled (5,5) aluminium nitride nanotubes ((5,5) AlNNTs) to carbon monoxide (CO) and carbon dioxide (CO2) gas molecules by performing DFT calculations using a hybrid functional, specifically, B3LYP (Becke's three-parameter, Lee-Yang-Parr) exchange-correlation functional at a 6-31G* basis set. This research investigates the adsorption behavior of CO2 and CO molecules on pristine and silicon-doped aluminum nitride nanotubes (AlNNTs) and examines their implications for sensor applications. The study assesses each system's adsorption energy, sensing potential, and recovery time to gain insights into their binding strength and practical viability. For CO2 adsorption on (5,5) AlNNT, significant adsorption energy of -24.36 kcal/mol was observed, indicating a strong binding to the nanotube surface, with a sensing potential of 8.95%. However, the slow recovery time of approximately 4.964 days may limit its real-time application. Si-(5,5) AlNNT exhibited a CO2 adsorption energy of -19.69 kcal/mol, a sensing potential of 5.40%, and a relatively short recovery time of approximately 2.978 min, making it a promising candidate for CO2 sensing. CO adsorption on (5,5) AlNNT showed an adsorption energy of -25.20 kcal/mol, a sensing potential of 9.095%, but a longer recovery time of approximately 20.130 days. Si-(5,5) AlNNT displayed a high CO adsorption energy of -20.78 kcal/mol, a sensing potential of 4.29%, and a recovery time of approximately 18.320 min. These findings provide insights into the adsorption characteristics of carbon molecules on AlNNTs, highlighting their potential for CO2 and CO sensing applications.

Kinetically stabilized 1,3-diarylisobenzofurans and the possibility of preparing large, persistent isoacenofurans with unusually small HOMO-LUMO gaps.

DFT calculations demonstrate that an isoacenofuran of any size possesses a smaller HOMO-LUMO gap than the corresponding acene bearing an isoelectronic π-system (i.e., the same total number of rings). Isoacenofurans show limited stability due in part to the highly reactive 1,3-carbons of the furan ring. Both 1,3-dimesitylisobenzofuran and 1,3-di(2',4',6'-triethylphenyl)isobenzofuran, each bearing sterically congesting ortho-alkyl groups on their phenyl substituents, have been synthesized and shown to adopt non-planar conformations with the ortho-alkyl groups located above and below the most reactive 1,3-carbons of the furan ring. These bulky substituents provide a strong measure of kinetic stabilization. Thus, 1,3-dimesitylisobenzofuran and 1,3-di(2',4',6'-triethylphenyl)isobenzofuran are significantly less reactive than 1,3-diphenylisobenzofuran toward the strong dienophiles DMAD and acrylonitrile. The insights gained here suggest that the synthesis of large, persistent, kinetically stabilized isoacenofurans with unusually small HOMO-LUMO gaps is achievable. As such, these molecules deserve increased attention as potential p-type organic semiconductors.

Theoretical elucidation of the structure, bonding, and reactivity of the CaMn4Ox clusters in the whole Kok cycle for water oxidation embedded in the oxygen evolving center of photosystem II. New molecular and quantum insights into the mechanism of the O-O bond formation.

This paper reviews our historical developments of broken-symmetry (BS) and beyond BS methods that are applicable for theoretical investigations of metalloenzymes such as OEC in PSII. The BS hybrid DFT (HDFT) calculations starting from high-resolution (HR) XRD structure in the most stable S1 state have been performed to elucidate structure and bonding of whole possible intermediates of the CaMn4Ox cluster (1) in the Si (i = 0 ~ 4) states of the Kok cycle. The large-scale HDFT/MM computations starting from HR XRD have been performed to elucidate biomolecular system structures which are crucial for examination of possible water inlet and proton release pathways for water oxidation in OEC of PSII. DLPNO CCSD(T0) computations have been performed for elucidation of scope and reliability of relative energies among the intermediates by HDFT. These computations combined with EXAFS, XRD, XFEL, and EPR experimental results have elucidated the structure, bonding, and reactivity of the key intermediates, which are indispensable for understanding and explanation of the mechanism of water oxidation in OEC of PSII. Interplay between theory and experiments have elucidated important roles of four degrees of freedom, spin, charge, orbital, and nuclear motion for understanding and explanation of the chemical reactivity of 1 embedded in protein matrix, indicating the participations of the Ca(H2O)n ion and tyrosine(Yz)-O radical as a one-electron acceptor for the O-O bond formation. The Ca-assisted Yz-coupled O-O bond formation mechanisms for water oxidation are consistent with recent XES and very recent time-resolved SFX XFEL and FTIR results.

Usage of the Y-Rule and the Effect of the Occurrence of Heteroatoms (N, S) on the Frontier Molecular Orbitals Gap of Polycyclic Aromatic Hydrocarbons (PAHs), and Asphaltene-PAHs.

The understanding of the molecular- and colloidal-structure of asphaltenes has seen a major progress; however, there are still issues that require answer. One of them is the location of the heteroatoms in the polycyclic aromatic hydrocarbon (PAH) fused aromatic ring (FAR) region of asphaltenes. Therefore, the effect on the frontier molecular orbitals (HOMO-LUMO) energy-gap due to the addition of a heteroatom (N or S) to PAHs, which are candidates of the PAH region in asphaltenes, has been systematically analyzed by placing S or N in various sites of the PAH molecule. The S is introduced as a thiophenic ring in a bay region, while the N is introduced as a pyridinic-N, which are prevalent forms in the asphaltene-PAH. 174 PAHs are studied with five fused aromatic rings (5FAR) to 10FAR. The π-electron allocation in resonant π-sextets and isolated double bonds is obtained using the Y-rule. The frontier orbitals optical transition is calculated with the ZINDO/S method. Within a FAR family an increment of π-sextets produces and increase of the HOMO-LUMO energy-gap. There is a linear relationship between the Y-rule mapping (percentage of fraction of π-sextet bond divided by nFAR) and the HOMO-LUMO energy-gap. In addition, the effect on the frontier orbitals energy-gap and on the π-electronic allocation due to the presence of N and S is negligible; therefore, to reach conclusions related to the asphaltene-PAH based on conclusions reached for PAH systems, with no heteroatoms, is a reasonable approach.

Effects of Metal Ions and Substituents on HOMO-LUMO Gap Evident from UV-Visible and Fluorescence Spectra of Anthracene Derivatives.

Controlled intake of complex metal cations and anions in the human body and other biological systems is essential for the health and well-being of the environment. Anthracene and anthracene derivatives are the most widely used sensors for this purpose. Because of their convenience, better detection and results are preferred over colorimetric sensors, which offer better color detection by the naked eye. This review article will present different designs of chemosensors using fluorescence and UV-visible spectroscopy to determine different ions. Density functional theory and Austin model 1 are widely used for theoretical and computational studies of the energy levels of molecules. The Indo/Cis method is used to calculate the geometries of anthracene oligomers. A novel anthracene-based fluorescent probe containing the benzothiazole group BFA was highly sensitive and selective toward trivalent cations (Cr3+ and Fe3+). This sensor is not sensitive to other ions, including Aluminum trivalent ions. (N- ((anthracen-9-yl) methyl)-N-(pyridin-2-yl) pyridin-2-amine) has been designed to detect zinc and copper. Click chemistry using photodimerization can be used to form cellulose nanoparticles. TEMPO-mediated hypohalite oxidation converts hydroxyl groups to carboxylic groups. Amide linkage formation between amine and carboxylic acid was followed by the installation of an alkyne group. Copper (I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) was used to produce highly photoresponsive and fluorescent cellulose nanoparticles by using coumarin, anthracene, and generated nanomaterials. The effects of naphthalene and phenanthrene on the spectra of anthracene were determined in a dilute solution. Temperature and solvent effects introduce different changes in fluorescence, emission, and absorption bands, leading to some changes in the configuration of anthracene. The solvent and temperature effects on variations of emission maxima of exciplex anthracene-diethylaniline (DEA) are also discussed.

Systematic Photophysical Interaction Studies Between Newly Synthesised Oxazole Derivatives and Silver Nanoparticles: Experimental and DFT Approach.

In this study, the photophysical properties of oxazole derivatives such as 5-(furan-2-yl) -4-tosyloxazole (OX-1) and 5-(2-bromothiazol-4-yl)-4-tosyloxazoles (OX-2) were investigated using theoretical and experimental techniques. The ground and excited state dipole moments were empirically obtained utilising the solvatochromic shift technique and several solvatochromic correlations such as Lippert's, Bakhshiev's, KawskiChamma- Viallet's, and solvent polarity equations. The ground state dipole moments, HOMO-LUMO and molecule electrostatic potential map were also computed using ab initio calculations and evaluated using Gaussian 09 W software. Furthermore, spectroscopic interactions between newly synthesised dyes (OX-1 and OX-2) and freshly synthesised silver nanoparticles (size 40 nm) were studied. Increased absorbance and widening of absorption spectra for both dyes in the presence of varied quantities of silver nanoparticles show the potential of dye-nanoparticle interactions. Fluorescence quenching has been detected for both dyes in the presence of colloidal silver nanoparticles, indicating dynamic quenching, and a significant overlap between the absorption and emission spectra of the silver nanoparticle reveals that fluorescence quenching is also due to energy transfer.

Effect of Chloride, Sulfate, and Ferrate Salts on Electronic Energy Levels of Anthracene Proving it a Potential Candidate as an ON and ON-OFF UV-Vis Sensor.

Anthracene molecule possesses remarkable optical activity and till today this molecule is of special interest of scientists. Present study is focused on the study of effects of Chloride, Sulfate, Nitrate and Ferrate salts on absorption and emission spectra of targeted fluorophore in carbontetrachloride, chloroform, dichloromethane and methanol. Prominent solvatochromic effects shows dependence of HOMO-LUMO orbitals on solvent polarity. Anthracene molecules exhibits changes in absorption and emission spectra, and show both ON and ON-OFF behavior on addition of said ions. Based on experimental results it was concluded that fluorophore molecule could be used more effectively as UV-Visible (UV-V) sensors in comparison to the emission sensor.

Photophysical and biological aspects of α, ß-unsaturated ketones: Experimental and in silico approach.

In this work, four fluorinated α, ß-unsaturated ketones named as 3-(3-bromophenyl)-1-(3-(trifluoromethyl)phenyl)prop-2-en-1-one (1), 3-(4-methoxyphenyl)-1-(3-(trifluoromethyl)phenyl) prop-2-en-1-one (2), 3-(3-bromo-5-chloro-2-hydroxyphenyl)-1-(3-(trifluoromethyl)phenyl) prop-2-en-1-one (3) and 3-(2-hydroxy-5-methylphenyl)-1-(3-(trifluoromethyl)phenyl)prop-2-en-1-one (4) were synthesized by Claisen-Schmidt reaction. The synthesized molecules were then characterized through ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared (FTIR), 1 H-NMR, 13 C-NMR, and mass spectrometry. The antioxidant potential, Urease inhibition, and interaction of compounds 1-4 with Salmon sperm DNA were experimentally explored and supported by molecular docking studies. The synthesized compounds strongly interact with SS-DNA through intercalative mode. It was noticed that compound 1 served as potent Urease inhibitor while compound 4 as better antioxidant among synthesized compounds. Moreover, frontier molecular orbitals, nonlinear optical (NLO) properties, natural bond orbitals, molecular electrostatic potential, natural population analysis, and photophysical properties of synthesized compounds were accomplished through density functional theory and time-dependent density functional theory. The band gap of all the compounds have been worked out using Taucs method. In addition to that, a precise comparative account of UV and IR data obtained from theoretical and experimental findings showed good agreement between theoretical and experimental data. The findings of our studies reflected that compounds 1-4 possess better NLO properties than Urea standard and the band gap data also reflected their prospective use towards optoelectronic materials. The better NLO behavior of compounds was attributed to the noncentrosymmetric structure of synthesized compounds.

A systematic computational study of acridine derivatives through conceptual density functional theory.

A detailed computational analysis of acridine derivatives viz. acridone, 9-amino acridine hydrochloride hydrate, proflavin, acridine orange and acridine yellow is done in terms of conceptual density functional theory (CDFT). CDFT-based global descriptors-ionization potential, electron affinity, HOMO-LUMO gap, hardness, softness, electronegativity and electrophilicity index of acridine derivatives for ground state as well as excited state are estimated with the help of different hybrid functionals B3LYP/6-31G (d, p), B3LYP/6-311G (d, p), B3LYP/DGDZVP and B3LYP/LANL2DZ. Acridine derivatives show higher values of ionization potential and electron affinity in excited state as compared to ground state, indicating that these compounds are willing to accept electrons in excited state rather than donating electron. Acridone shows the maximum HOMO-LUMO energy gap in ground and excited state which implies that one-way electron transfer is most feasible with this compound. Our computed results emphasize the pronounced electron acceptor behaviour of the acridine derivatives in the excited state which has already been experimentally verified. It is observed that the trend in the computed values of the descriptors is not much improved on refinement of the basis set.

Molecular Structure, Spectral Analysis, Molecular Docking and Physicochemical Studies of 3-Bromo-2-hydroxypyridine Monomer and Dimer as Bromodomain Inhibitors.

In this paper, both methods (DFT and HF) were used in a theoretical investigation of 3-bromo-2-Hydroxypyridine (3-Br-2HyP) molecules where the molecular structures of the title compound have been optimized. Molecular electrostatic potential (MEP) was computed using the B3LYP/6-311++G(d,p) level of theory. The time-dependent density functional theory (TD-DFT) approach was used to simulate the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) on the one hand to achieve the frontier orbital gap and on the other hand to calculate the UV-visible spectrum of the compound in gas phase and for different solvents. In addition, electronic localization function and Fukui functions were carried out. Intermolecular interactions were discussed by the topological AIM (atoms in molecules) approach. The thermodynamic functions have been reported with the help of spectroscopic data using statistical methods revealing the correlations between these functions and temperature. To describe the non-covalent interactions, the reduced density gradient (RDG) analysis is performed. To study the biological activity of the compound of the molecule, molecular docking studies were executed on the active sites of BRD2 inhibitors and to explore the hydrogen bond interaction, minimum binding energies with targeted receptors such as PDB ID: 5IBN, 3U5K, 6CD5 were calculated.

Integrated Structural, Functional, and ADMET Analysis of 2-Methoxy-4,6-diphenylnicotinonitrile: The Convergence of X-ray Diffraction, Molecular Docking, Dynamic Simulations, and Advanced Computational Insights.

This study systematically investigates the molecular structure and electronic properties of 2-methoxy-4,6-diphenylnicotinonitrile, employing X-ray diffraction (XRD) and sophisticated computational methodologies. XRD findings validate the compound's orthorhombic crystallization in the P21212 space group, composed of a pyridine core flanked by two phenyl rings. Utilizing the three-dimensional Hirshfeld surface, the research decodes the molecule's spatial attributes, further supported by exhaustive statistical assessments. Key interactions, such as π-π stacking and H⋯X contacts, are spotlighted, underscoring their role in the crystal's inherent stability and characteristics. Energy framework computations and density functional theory (DFT) analyses elucidate the prevailing forces in the crystal and reveal geometric optimization facets and molecular reactivity descriptors. Emphasis is given to the exploration of frontier molecular orbitals (FMOs), aromaticity, and π-π stacking capacities. The research culminates in distinguishing electron density distributions, aromatic nuances, and potential reactivity hotspots, providing a holistic view of the compound's structural and electronic landscape. Concurrently, molecular docking investigates its interaction with the lipoprotein-associated phospholipase A2 protein. Notably, the compound showcases significant interactions with the protein's active site. Molecular dynamics simulations reveal the compound's influence on protein stability and flexibility. Although the molecule exhibits strong inhibitory potential against Lp-PLA2, its drug development prospects face challenges related to solubility and interactions with drug transport proteins.

Experimental IR, Raman, and UV-Vis Spectra DFT Structural and Conformational Studies: Bioactivity and Solvent Effect on Molecular Properties of Methyl-Eugenol.

Structural, conformational, and spectroscopic investigations of methyl-eugenol were made theoretically at the B3LYP-6-311++G**level. Experimental IR, Raman, and UV-vis spectra were investigated and analyzed in light of the computed quantities. Conformational analysis was carried out with the help of total energy vs. dihedral angle curves for different tops, yielding 21 stable conformers, out of which only two have energies below the room temperature relative to the lowest energy conformer. The effect of the solvent on different molecular characteristics was investigated theoretically. MEP and HOMO-LUMO analysis were carried out and barrier heights and bioactivity scores were determined. The present investigation suggests that the molecule has three active sites with moderate bioactivity. The solvent-solute interaction is found to be dominant in the vicinity of the methoxy moieties.

A Theoretical Investigation of Novel Sila- and Germa-Spirocyclic Imines and Their Relevance for Electron-Transporting Materials and Drug Discovery.

A new class of spirocyclic imines (SCIs) has been theoretically investigated by applying a variety of quantum chemical methods and basis sets. The uniqueness of these compounds is depicted by various peculiarities, e.g., the incidence of planar six-membered rings each with two imine groups (two π bonds) and the incorporation of the isosteres carbon, silicon, or germanium spiro centers. Additional peculiarities of these novel SCIs are mirrored by their three-dimensionality, the simultaneous occurrence of nucleophilic and electrophilic centers, and the cross-hyperconjugative (spiro-conjugation) interactions, which provoke charge mobility along the spirocyclic scaffold. Substitution of SCIs with strong electron-withdrawing substituents, like the cyano group or fluorine, enhances their docking capability and impacts their reactivity and charge mobility. To gain thorough knowledge about the molecular properties of these SCIs, their structures have been optimized and various quantum chemical concepts and models were applied, e.g., full NBO analysis and the frontier molecular orbitals (FMOs) theory (HOMO-LUMO energy gap) and the chemical reactivity descriptors derived from them. For the assessment of the charge density distribution along the SCI framework, additional complementary quantum chemical methods were used, e.g., molecular electrostatic potential (MESP) and Bader's QTAIM. Additionally, using the aromaticity index NICS (nuclear independent chemical shift) and other criteria, it could be shown that the investigated cross-hyperconjugated sila and germa SCIs are spiro-aromatics of the Heilbronner Craig-type Möbius aromaticity.

Substituent Effect to Fine-Tune Energy Levels of Atom-Precise [MoOS3 ]2- Modified Copper(I) Thiolate Clusters Boosting Recyclable Photocatalysis.

The propulsion of photocatalytic hydrogen (H2 ) production is limited by the rational design and regulation of catalysts with precise structures and excellent activities. In this work, the [MoOS3 ]2- unit is introduced into the CuI clusters to form a series of atomically-precise MoVI -CuI bimetallic clusters of [Cu6 (MoOS3 )2 (C6 H5 (CH2 )S)2 (P(C6 H4 -R)3 )4 ] ⋅ xCH3 CN (R=H, CH3 , or F), which show high photocatalytic H2 evolution activities and excellent stability. By electron push-pull effects of the surface ligand, highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels of these MoVI -CuI clusters can be finely tuned, promoting the resultant visible-light-driven H2 evolution performance. Furthermore, MoVI -CuI clusters loaded onto the surface of magnetic Fe3 O4 carriers significantly reduced the loss of catalysts in the collection process, efficiently addressing the recycling issues of such small cluster-based catalyst. This work not only highlights a competitively universal approach on the design of high-efficiency cluster photocatalysts for energy conversion, but also makes it feasible to manipulate the catalytic performance of clusters through a rational substituent strategy.

Density functional theory studies on molecular geometry, spectroscopy, HOMO-LUMO and reactivity descriptors of titanium(IV) and oxidozirconium(IV) complexes of phenylacetohydroxamic acid.

The molecular geometry of new titanium(IV) and oxidozirconium(IV) phenylacetohydroxamate complexes [TiCl2 (L1)2 ] (I) and [ZrO(L1)2 ] (II) (where L1 = Potassium phenylacetohydroxamate = C6 H5 CH2 CONHOK) computed by B3LYP/6-311++G(d,p) method has shown these to be distorted octahedral and square pyramidal, respectively. A comparison of computed characteristic bond lengths (CO, CN, and NO) of complexes with that of free ligand has shown chelation through carbonyl and hydroxamic oxygen atoms (O, O coordination). The TiO/ZrO bond lengths in complexes are suggestive of weak coordination through (carbonyl CO) and strong covalent (hydroxamic NO) bonding of the ligand. The magnitude of ClTiCl bond angle involving two chloride atoms is suggestive of cis-conformation at titanium metal in (I). The thermodynamic parameters Gibbs free energy, enthalpy, entropy, nuclear internal energy, constant volume heat capacity, and internal energy of ligand and complexes have been computed. From the energies of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), the global reactivity descriptors such as ionization potential (IP), electron affinity (EA), chemical potential (µ), hardness (η), softness (S), electronegativity (χ), electrophilicity index (ω), and dipole moment have been calculated. The computed vibrational frequencies, 1 H and 13 C NMR spectra have substantiated the molecular structure of complexes. The thermal behavior of complexes has been studied by thermogravimetric techniques (TGA, DTG, and DTA) in N2 atmosphere has shown complexes are thermally stable.

Indeno[1,2,3,4-pqra]Perylene: A Medium-Sized Aromatic Hydrocarbon Exhibiting Full-Range Visible-Light Absorption.

We report the synthesis and properties of indeno[1,2,3,4-pqra]perylene, which was prepared by the fusion of one anthracene unit with one naphthalene unit via three carbon-carbon bonds. The synthetic route through two-fold C-H arylation enabled not only the synthesis of unsubstituted indenoperylene, but also rapid access to its arylated derivatives on the gram scale. Indenoperylene is a medium-sized aromatic hydrocarbon with the composition C24 H12 that is isomeric to coronene. Nevertheless, its absorption covers the entire visible region owing to its small HOMO-LUMO gap. Furthermore, indenoperylene exhibits high stability despite the absence of peripheral substituents. We propose that the unique electronic structure of indenoperylene originates from the coexistence of an electron-withdrawing subunit (benzoaceanthrylene) and an electron-donating subunit (perylene). The electronic properties of indenoperylene were modulated via post-functionalization through regioselective bromination. The current research demonstrates that indenoperylene is a promising candidate as a main skeleton for near-infrared-responsive and redox-active materials.