Transcriptomic profiling of haloarchaeal denitrification through RNA-Seq analysis.

Denitrification, a crucial biochemical pathway prevalent among haloarchaea in hypersaline ecosystems, has garnered considerable attention in recent years due to its ecological implications. Nevertheless, the underlying molecular mechanisms and genetic regulation governing this respiration/detoxification process in haloarchaea remain largely unexplored. In this study, RNA-sequencing was used to compare the transcriptomes of the haloarchaeon Haloferax mediterranei under oxic and denitrifying conditions, shedding light on the intricate metabolic alterations occurring within the cell, such as the accurate control of the metal homeostasis. Furthermore, the investigation identifies several genes encoding transcriptional regulators and potential accessory proteins with putative roles in denitrification. Among these are bacterioopsin-like transcriptional activators, proteins harboring a domain of unknown function (DUF2249), and cyanoglobin. In addition, the study delves into the genetic regulation of denitrification, finding a regulatory motif within promoter regions that activates numerous denitrification-related genes. This research serves as a starting point for future molecular biology studies in haloarchaea, offering a promising avenue to unravel the intricate mechanisms governing haloarchaeal denitrification, a pathway of paramount ecological importance.IMPORTANCEDenitrification, a fundamental process within the nitrogen cycle, has been subject to extensive investigation due to its close association with anthropogenic activities, and its contribution to the global warming issue, mainly through the release of N2O emissions. Although our comprehension of denitrification and its implications is generally well established, most studies have been conducted in non-extreme environments with mesophilic microorganisms. Consequently, there is a significant knowledge gap concerning extremophilic denitrifiers, particularly those inhabiting hypersaline environments. The significance of this research was to delve into the process of haloarchaeal denitrification, utilizing the complete denitrifier haloarchaeon Haloferax mediterranei as a model organism. This research led to the analysis of the metabolic state of this microorganism under denitrifying conditions and the identification of regulatory signals and genes encoding proteins potentially involved in this pathway, serving as a valuable resource for future molecular studies.

Coupling Magnetic Field and Salinity Upshock To Improve Polyhydroxyalkanoate Productivity by Haloferax mediterranei Feeding on Molasses Wastewater.

Low polyhydroxyalkanoate (PHA) volumetric productivity from wastewater limits low-cost PHA production. To resolve this problem, an external magnetic field (MF) coupled with upshock salinity was applied to PHA production by Haloferax mediterranei (family Halobacteriaceae). Elevating the fermentation salinity over the optimal growth salinity (200 g/L) increased the PHA cell content while inhibiting cell proliferation, decreasing volumetric productivity. When a MF of 50 mT in 300 g/L salinity was applied, H. mediterranei proliferation and PHA cell content were promoted, leading to a 7.95% increase in PHA volumetric productivity in synthetic molasses wastewater and a 13.82% increase in glucose feeding compared with those in 200 g/L salinity. Under the MF, osmotic pressure regulation was activated by accumulating K+ and increasing betaine synthesis. The maximum betaine content increased by 74.33% in 300 g/L salinity with a 50-mT MF compared with that in 200 g/L salinity. When a 50-mT MF in 300 g/L salinity was applied, the malondialdehyde (MDA) content decreased by 32.66% and the activity of superoxide dismutase (SOD) increased by 46.89%, which reduced the oxidative damage. This study provides a new solution to enhance PHA volumetric productivity by MF and an insight into the magnetic effects of H. mediterranei. IMPORTANCE The obstacle to replacing petroplastics with PHA is its high production cost. To increase the fermentation economy, a novel strategy of coupling a MF with salinity upshock was applied, which enhanced the PHA volumetric productivity of H. mediterranei in fermenting molasses wastewater. The magnetic effect of H. mediterranei was found at a MF of 50 mT, which improved the salt tolerance of H. mediterranei and reduced the oxidative damage induced by the elevated salinity, thereby promoting proliferation and PHA cell content. This is the first time a technical method for enhancing PHA volumetric productivity by means of a MF has been proposed. Such a strategy can advance the utilization of H. mediterranei for the industrial production of PHA using organic wastewater.

Effect of levulinic acid on production of polyhydroxyalkanoates from food waste by Haloferax mediterranei.

Polyhydroxyalkanoates (PHA), especially poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is considered as the most suitable candidate to replace petrochemical plastics. However, the high production cost and the composition of the monomers in the copolymer are the major constraints in production. The 3-hydroxyvalerate (3HV) rich copolymers are ideal for various applications due to their lower melting points, improved elasticity, and ductility. Haloferax mediterranei is a suitable microorganism for the production of biopolymer PHBV from biowaste. Nevertheless, the potential of H. mediterranei cultivated on food waste as sustainable substrate and levulinic acid as an inducer has not been explored for PHBV production. This study aims at the valorization of food waste as low-cost substrate and evaluation of effect of levulinic acid in the production and composition of PHBV using H. mediterranei. Shake-flask fermentations using different concentrations of salt, glucose and levulinic acid were first performed to optimize the cultivation conditions. The highest growth of the halophile was observed at salt concentration of 15% and glucose of concentration 10 g/L. Under optimized growth conditions, H. mediterranei was cultivated for PHBV production in fed-batch bioreactor with pulse fed levulinic acid. The maximum biomass of 3.19 ± 0.66 g/L was achieved after 140 h of cultivation with 3 g/L of levulinic acid. A decrease in H. mediterranei growth was noticed with the increase in levulinic acid concentration in the range of 3-10 g/L. The overall yield of PHBV at 3, 5, 7 and 10 g/L of levulinic acid were 18.23%, 56.70%, 31.54%, 21.29%, respectively. The optimum concentration of 5 g/L of levulinic acid was found to produce the maximum yield of 56.70% PHBV with 18.55 mol% 3HV content. A correlation between levulinic acid concentrations and PHBV production established in this study can serve as an important reference for future large-scale production.

Carbon Source Influences Antioxidant, Antiglycemic, and Antilipidemic Activities of Haloferax mediterranei Carotenoid Extracts.

Haloarchaeal carotenoids have attracted attention lately due to their potential antioxidant activity. This work studies the effect of different concentrations of carbon sources on cell growth and carotenoid production. Carotenoid extract composition was characterized by HPLC-MS. Antioxidant activity of carotenoid extracts obtained from cell cultures grown under different nutritional conditions was determined by 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH), Ferric Reducing Ability Power (FRAP) and ß-carotene bleaching assays. The ability of these carotenoid extracts to inhibit α-glucosidase, α-amylase, and lipase enzymes was also assessed to determine if they could be used to reduce blood glucose and lipid absorption. The maximum production of carotenoids (92.2 µg/mL) was observed combining 12.5% inorganic salts and 2.5% of glucose/starch. Antioxidant, hypoglycemic, and antilipidemic studies showed that higher carbon availability in the culture media leads to changes in the extract composition, resulting in more active haloarchaeal carotenoid extracts. Carotenoid extracts obtained from high-carbon-availability cell cultures presented higher proportions of all-trans-bacterioruberin, 5-cis-bacterioruberin, and a double isomeric bacterioruberin, whereas the presence 9-cis-bacterioruberin and 13-cis-bacterioruberin decreased. The production of haloarchaeal carotenoids can be successfully optimized by changing nutritional conditions. Furthermore, carotenoid composition can be altered by modifying carbon source concentration. These natural compounds are very promising in food and nutraceutical industries.

Evaluating haloarchaeal culture media for ultrahigh-molecular-weight polyhydroxyalkanoate biosynthesis by Haloferax mediterranei.

A series of culture media for haloarchaea were evaluated to optimize the production of ultrahigh-molecular-weight (UHMW) poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei. Cells of H. mediterranei grew (> 1 g/L of dry cell weight) and accumulated PHBV upon flask cultivation in 10 medium types with neutral pH and NaCl concentration > 100 g/L. Molecular weight and compositional analysis revealed that the number-average molecular weight (Mn) of PHBV produced with six selected types of media ranged from 0.8 to 3.5 × 106 g/mol and the 3-hydroxyvalerate (3HV) composition ranged from 8 to 36 mol%. Cultivation in two NBRC media, 1214 and 1380, resulted in the production of PHBV with an Mn of more than 3.0 × 106 g/mol and a weight-average molecular weight of more than 5.0 × 106 g/mol, indicating the production of UHMW-PHBV. These culture media contained small amount of complex nutrients like yeast extract and casamino acids, suggesting that H. mediterranei likely produced UHMW-PHBV on poor nutrient condition. Haloferax mediterranei grown in NBRC medium 1380 produced PHBV with the highest 3HV composition. A solvent-cast film of UHMW-PHBV with 26.4 mol% 3HV produced from 1-L flask cultivation with NBRC medium 1380 was found to be flexible and semi-transparent. Thermal analysis of the UHMW-PHBV cast film revealed melting and glass-transition temperatures of 90.5 °C and - 2.7 °C, respectively. KEY POINTS: • Haloarchaeal culture media were evaluated to produce UHMW-PHBV by H. mediterranei. • UHMW-PHBV with varied molecular weight was produced dependent on culture media. • Semi-transparent film could be made from UHMW-PHBV with 26.4 mol% 3HV.

Haloferax mediterranei Cells as C50 Carotenoid Factories.

Haloarchaea produce C50 carotenoids such as bacterioruberin, which are of biotechnological in-terest. This study aimed to analyze the effect of different environmental and nutritional conditions on the cellular growth and dynamics of carotenoids accumulation in Haloferax mediterranei. The maximum production of carotenoids (40 µg·mL-1) was obtained during the stationary phase of growth, probably due to nutrient-limiting conditions (one-step culture). By seven days of culture, 1 mL culture produced 22.4 mg of dry weight biomass containing 0.18 % (w/w) of carotenoids. On the other hand, carbon-deficient cultures (low C/N ratio) were observed to be optimum for C50 bacterioruberin production by Hfx. mediterranei, but negatively affected the growth of cells. Thus, a two-steps process was evaluated for optimum carotenoids yield. In the first step, a nutri-ent-repleted culture medium enabled the haloarchaea to produce biomass, while in the second step, the biomass was incubated under osmotic stress and in a carbon-deficient medium. Under the conditions used, the obtained biomass contained 0.27% (w/w) of carotenoids after seven days, which accounts for 58.49 µg·mL-1 of carotenoids for a culture with turbidity 14.0.

Deletion of the pps-like gene activates the cryptic phaC genes in Haloferax mediterranei.

Haloferax mediterranei, a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) producing haloarchaeon, possesses four PHA synthase encoding genes, phaC, phaC1, phaC2, and phaC3. In the wild-type strain, except phaC, the other three genes are cryptic and not transcribed under PHA-accumulating conditions. The PhaC protein together with PhaE subunit forms the active PHA synthase and catalyzes PHBV polymerization. Previously, it was observed that the deletion of a gene named pps-like significantly enhanced PHBV accumulation probably resulted from the upregulation of pha cluster genes (phaR-phaP-phaE-phaC). The present study demonstrated the influence of pps-like gene deletion on the cryptic phaC genes. As revealed by qRT-PCR, the expression level of the three cryptic genes was upregulated in the ΔEPSΔpps-like geneΔphaC mutant. Sequential knockout of the cryptic phaC genes and fermentation experiments showed that PhaC1 followed by PhaC3 had the ability to synthesize PHBV in ΔEPSΔpps-like geneΔphaC mutant. Both PhaC1 and PhaC3 could complex with PhaE to form functionally active PHA synthase. However, the expression of phaC2 did not lead to PHBV synthesis. Moreover, PhaC, PhaC1, and PhaC3 exhibited distinct substrate specificity as the 3HV content in PHBV copolymers was different. The EMSA result showed that PPS-like protein might be a negative regulator of phaC1 gene by binding to its promoter region. Taken together, PhaC1 had the most pronounced effect on PHBV synthesis in ΔEPSΔpps-like geneΔphaC mutant and deletion of pps-like gene released the negative effect from phaC1 expression and thereby restored PHBV accumulating ability in ΔphaC mutant. KEY POINTS: • Cryptic phaC genes were activated by pps-like gene deletion. • PPS-like protein probably regulated phaC1 expression by binding to its promoter. • Both PhaC1 and PhaC3 formed active PHA synthase with PhaE.

Optimization of Growth and Carotenoid Production by Haloferax mediterranei Using Response Surface Methodology.

Haloferax mediterranei produces C50 carotenoids that have strong antioxidant properties. The response surface methodology (RSM) tool helps to accurately analyze the most suitable conditions to maximize C50 carotenoids production by haloarchaea. The effects of temperature (15⁻50 °C), pH (4-10), and salinity (5⁻28% NaCl (w/v)) on the growth and carotenoid content of H. mediterranei were analyzed using the RSM approach. Growth was determined by measuring the turbidity at 600 nm. To determine the carotenoid content, harvested cells were lysed by freeze/thawing, then re-suspended in acetone and the total carotenoid content determined by measuring the absorbance at 494 nm. The analysis of carotenoids was performed by an HPLC system coupled with mass spectrometry. The results indicated the theoretical optimal conditions of 36.51 or 36.81 °C, pH of 8.20 or 8.96, and 15.01% or 12.03% (w/v) salinity for the growth of haloarchaea (OD600 = 12.5 ± 0.64) and production of total carotenoids (3.34 ± 0.29 mg/L), respectively. These conditions were validated experimentally for growth (OD600 = 13.72 ± 0.98) and carotenoid production (3.74 ± 0.20 mg/L). The carotenoid profile showed four isomers of bacterioruberin (89.13%). Our findings suggest that the RSM approach is highly useful for determining optimal conditions for large-scale production of bacterioruberin by haloarchaea.

Systematic Analysis of Lysine Acetylation in the Halophilic Archaeon Haloferax mediterranei.

Lysine acetylation is a reversible and highly regulated post-translational modification that plays a critical role in regulating many aspects of cellular processes, both in bacteria and in eukaryotes. However, this modification has not been systematically studied in archaea. Herein, we report the lysine acetylome of a model haloarchaeon, Haloferax mediterranei. Using immunoaffinity enrichment and LC-MS/MS analysis, we identified 1017 acetylation sites in 643 proteins, accounting for 17.3% of the total proteins in this haloarchaeon. Bioinformatics analysis indicated that lysine acetylation mainly distributes in cytoplasm (94%) and participates in protein biosynthesis and carbon metabolism. Specifically, the acetylation of key enzymes in PHBV biosynthesis further suggested that acetylation plays a key role in the energy and carbon storage. In addition, a survey of the acetylome revealed a universal rule in acetylated motifs: a positively charged residue (K, R, or H) located downstream of acetylated lysine at the positions +1, +2, or +3. Interestingly, we identified acetylation in several replication initiation proteins Cdc6; mutation on the acetylated site of Cdc6A destroyed the Autonomous Replication Sequence (ARS) activity of its adjacent origin oriC1. Our study indicates that lysine acetylation is an abundant modification in H. mediterranei, and plays key roles in the processes of replication, protein biosynthesis, central metabolism, and carbon storage. This acetylome of H. mediterranei provides opportunities to explore the physiological role of acetylation in halophilic archaea.

Production of the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with varied composition using different nitrogen sources with Haloferax mediterranei.

The extreme haloarchaea Haloferax mediterranei accumulates poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) without the need for specific precursors. In this study, growth kinetics and PHBV synthesis were characterised under nitrogen-excess and nitrogen-limiting conditions in ammonium and, for the first time, nitrate. With excess nitrogen, ammonium and nitrate cultures generated 10.7 g/L biomass containing 4.6 wt% PHBV and 5.6 g/L biomass with 9.3 wt% PHBV, respectively. Copolymer composition varied with the nitrogen source used: PHBV from ammonium cultures had 16.9 mol% 3-hydroxyvalerate (HV), while PHBV from nitrate cultures contained 12.5 mol% HV. Nitrogen limitation was achieved with carbon-to-nitrogen (C/N) molar ratios of 25 or higher. Nitrogen limitation reduced biomass generation and polymer concentration, but polymer accumulation increased to 6.6 and 9.4% for ammonium and nitrate, respectively, with C/N 42. PHBV composition was also affected and cultures with lower C/N ratios produced richer HV polymers. Copolymer formation was not a uniform process: HV was only detected after a minimum accumulation of 0.45 g/L PHB and lasted for a maximum of 48 h. The understanding of copolymer synthesis and the influence of culture conditions such as the nitrogen source will help in designing novel strategies for the production of PHBV with more regular structure and material properties.

Mass production of C50 carotenoids by Haloferax mediterranei in using extruded rice bran and starch under optimal conductivity of brined medium.

Microbial carotenoids have potentially healthcare or medical applications. Haloferax mediterranei was difficult to economically grow into a large quantities as well as producing a valuable pigment of carotenoids. This study reports a novel investigation into the optimal conductivity on the mass production of carotenoids from H. mediterranei. The major component at about 52.4% in the extracted red pigment has been confirmed as bacterioruberin, a C50 carotenoids, by liquid chromatography separation and mass spectrometry analysis. By maintaining higher conductivity of 40 S/m in the brined medium, the cell concentration attained to 7.73 × 10(9) cells/L with low pigments concentration of 125 mg/L. When the conductivity was controlled at about 30 S/m, we obtained the highest cell concentration to 1.29 × 10(10) cells/L with pigments of 361.4 mg/L. When the conductivity was maintained at optimal 25 S/m, the pigments can be increased to maximum value of 555.6 mg/L at lower cell concentration of 9.22 × 10(9) cells/L. But conductivity below 20 S/m will cause the significant decrease in cell concentration as well as pigments due to the osmotic stress around the cells. Red pigment of carotenoids from an extremely halophilic archaebacterium could be efficiently produced to a high concentration by applying optimal conductivity control in the brined medium with extruded low-cost rice bran and corn starch.

Production of Polyhydroxyalkanoates for Biodegradable Food Packaging Applications Using Haloferax mediterranei and Agrifood Wastes.

Polyhydroxyalkanoates (PHAs) are high-value biodegradable polyesters with thermoplastic properties used in the manufacturing of different products such as packaging films. PHAs have gained much attention from researchers and industry because of their biobased nature and appropriate features, similar to conventional synthetic plastics. This review aims to discuss some of the recent solutions to challenges associated with PHA production. The implementation of a cost-effective process is presented by following different strategies, such as the use of inexpensive carbon sources, the selection of high-producing microorganisms, and the functionalization of the final materials to make them suitable for food packaging applications, among others. Research efforts are needed to improve the economic viability of PHA production at a large scale. Haloferax mediterranei is a promising producer of PHAs due to its ability to grow in non-sterile conditions and the possibility of using seawater to prepare the growth medium. Additionally, downstream processing for PHA extraction can be simplified by treating the H. mediterranei cells with pure water. Further research should focus on the optimization of the recycling conditions for the effluents and on the economic viability of the side streams reutilization and desalinization as an integrated part of PHA biotechnological production.

Bioplastic Production from Agri-Food Waste through the Use of Haloferax mediterranei: A Comprehensive Initial Overview.

The research on bioplastics (both biobased and biodegradable) is steadily growing and discovering environmentally friendly substitutes for conventional plastic. This review highlights the significance of bioplastics, analyzing, for the first time, the state of the art concerning the use of agri-food waste as an alternative substrate for biopolymer generation using Haloferax mediterranei. H. mediterranei is a highly researched strain able to produce polyhydroxybutyrate (PHB) since it can grow and produce bioplastic in high-salinity environments without requiring sterilization. Extensive research has been conducted on the genes and pathways responsible for PHB production using H. mediterranei to find out how fermentation parameters can be regulated to enhance cell growth and increase PHB accumulation. This review focuses on the current advancements in utilizing food waste as a substitute for costly substrates to reduce feedstock expenses. Specifically, it examines the production of biomass and the recovery of PHB from agri-food waste. Furthermore, it emphasizes the characterization of PHB and the significance of hydroxyvalerate (HV) abundance in the formation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) copolymer. The downstream processing options are described, and the crucial factors associated with industrial scale-up are assessed, including substrates, bioreactors, process parameters, and bioplastic extraction and purification. Additionally, the economic implications of various options are discussed.

Production of polyhydroxyalkanoates from hydrolysed rapeseed meal by Haloferax mediterranei.

Rapeseed meal (RSM) hydrolysate is a potential low-cost feedstock for the production of polyhydroxyalkanoates (PHAs) by the archaea, Haloferax mediterranei. Acidic and enzymatic hydrolysis were carried out to compare effectiveness. Enzymatic hydrolysis is more effective than acidic hydrolysis for fermentation substrate leading to increased PHA productivity. H. mediterranei didn't grow or produce PHA when acid hydrolysed RSM medium was present in proportions greater than 25% (vol.), potentially due to the effect of inhibitors such as furfural, hydroxymethylfurfural (HMF), etc. However, H. mediterranei was able to grow and produce PHA when using enzymatically hydrolysed RSM medium. The maximum PHA concentration of 0.512 g/L was found at 75% (vol.) in enzymatic RSM hydrolysate medium. The biopolymer obtained had improved thermal and mechanical properties compared to PHB homopolymer. RSM's potential as a low-cost alternative feedstock for improved PHA production under non-sterile conditions was successfully demonstrated, and its usage should be further explored.

Analysis of the external signals driving the transcriptional regulation of the main genes involved in denitrification in Haloferax mediterranei.

Haloferax mediterranei is the model microorganism for the study of the nitrogen cycle in haloarchaea. This archaeon not only assimilate N-species such as nitrate, nitrite, or ammonia, but also it can perform denitrification under low oxygen conditions, using nitrate or nitrite as alternative electron acceptors. However, the information currently available on the regulation of this alternative respiration in this kind of microorganism is scarce. Therefore, in this research, the study of haloarchaeal denitrification using H. mediterranei has been addressed by analyzing the promoter regions of the four main genes of denitrification (narGH, nirK, nor, and nosZ) through bioinformatics, reporter gene assays under oxic and anoxic conditions and by site-directed mutagenesis of the promoter regions. The results have shown that these four promoter regions share a common semi-palindromic motif that plays a role in the control of the expression levels of nor and nosZ (and probably nirK) genes. Regarding the regulation of the genes under study, it has been concluded that nirK, nor, and nosZ genes share some expression patterns, and therefore their transcription could be under the control of the same regulator whereas nar operon expression displays differences, such as the activation by dimethyl sulfoxide with respect to the expression in the absence of an electron acceptor, which is almost null under anoxic conditions. Finally, the study with different electron acceptors demonstrated that this haloarchaea does not need complete anoxia to perform denitrification. Oxygen concentrations around 100 µM trigger the activation of the four promoters. However, a low oxygen concentration per se is not a strong signal to activate the promoters of the main genes involved in this pathway; high activation also requires the presence of nitrate or nitrite as final electron acceptors.

Continuous bioreactor production of polyhydroxyalkanoates in Haloferax mediterranei.

In this work, the viability of continuous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) production with controlled composition in Haloferax mediterranei when fed volatile fatty acids is demonstrated. Continuous fermentations showed to greatly outperform batch fermentations with continuous feeding. Operating the bioreactor continuously allowed for PHBV productivity normalised by cell density to increase from 0.29 to 0.38 mg L-1 h-1, in previous continuously fed-fed batch fermentations, to 0.87 and 1.43 mg L-1 h-1 in a continuous mode of operation for 0.1 and 0.25 M carbon concentrations in the media respectively. Continuous bioreactor experiments were carried out for 100 h, maintaining control over the copolymer composition at around 30 mol% 3-hydroxyvalerate 3HV. This work presents the first continuous production of PHBV in Haloferax mediterranei which continuously delivers polymer at a higher productivity, compared to fed-batch modes of operation. Operating bioreactors continuously whilst maintaining control over copolymer composition brings new processing opportunities for increasing biopolymer production capacity, a crucial step towards the wider industrialisation of polyhydroxyalkanoates (PHAs).

Multimeric structure of a subfamily III haloalkane dehalogenase-like enzyme solved by combination of cryo-EM and x-ray crystallography.

Haloalkane dehalogenase (HLD) enzymes employ an SN 2 nucleophilic substitution mechanism to erase halogen substituents in diverse organohalogen compounds. Subfamily I and II HLDs are well-characterized enzymes, but the mode and purpose of multimerization of subfamily III HLDs are unknown. Here we probe the structural organization of DhmeA, a subfamily III HLD-like enzyme from the archaeon Haloferax mediterranei, by combining cryo-electron microscopy (cryo-EM) and x-ray crystallography. We show that full-length wild-type DhmeA forms diverse quaternary structures, ranging from small oligomers to large supramolecular ring-like assemblies of various sizes and symmetries. We optimized sample preparation steps, enabling three-dimensional reconstructions of an oligomeric species by single-particle cryo-EM. Moreover, we engineered a crystallizable mutant (DhmeAΔGG ) that provided diffraction-quality crystals. The 3.3 Å crystal structure reveals that DhmeAΔGG forms a ring-like 20-mer structure with outer and inner diameter of ~200 and ~80 Å, respectively. An enzyme homodimer represents a basic repeating building unit of the crystallographic ring. Three assembly interfaces (dimerization, tetramerization, and multimerization) were identified to form the supramolecular ring that displays a negatively charged exterior, while its interior part harboring catalytic sites is positively charged. Localization and exposure of catalytic machineries suggest a possible processing of large negatively charged macromolecular substrates.

Exploitation of wasted bread as substrate for polyhydroxyalkanoates production through the use of Haloferax mediterranei and seawater.

The use of the halophile microorganism Haloferax mediterranei, able to synthesize poly(hydroxybutyrate-hydroxyvalerate) (PHBV), is considered as a promising tool for the industrial production of bioplastic through bioprocessing. A consistent supplementation of the growth substrate in carbohydrates and minerals is overall necessary to allow its PHBV production. In this work, wasted bread was used as substrate for bioplastic production by microbial fermentation. Instead of the consistent and expensive minerals supplement required for Hfx. mediterranei DSM1411 growth, microfiltered seawater was added to the wasted bread-derived substrate. The suitable ratio of wasted bread homogenate and seawater, corresponding to 40:60, was selected. The addition of proteases and amylase to the bread homogenate promoted the microbial growth but it did not correspond to the increase of bioplastic production by the microorganism, that reach, under the experimental conditions, 1.53 g/L. An extraction procedure of the PHBV from cells, based on repeated washing with water, followed or not by a purification through ethanol precipitation, was applied instead of the conventional extraction with chloroform. Yield of PHBV obtained using the different extraction methods were 21.6 ± 3.6 (standard extraction/purification procedure with CHCl3:H2O mixture), 24.8 ± 3.0 (water-based extraction), and 19.8 ± 3.3 mg PHAs/g of wasted bread (water-based extraction followed by ethanol purification). Slightly higher hydroxyvalerate content (12.95 vs 10.78%, w/w) was found in PHBV obtained through the water-based extraction compared to the conventional one, moreover, the former was characterized by purity of 100% (w/w). Results demonstrated the suitability of wasted bread, supplemented with seawater, to be used as substrate for bioplastic production through fermentation. Results moreover demonstrated that a solvent-free extraction, exclusively based on osmotic shock, could be used to recover the bioplastic from cells.

Process Development of Polyhydroxyalkanoates Production by Halophiles Valorising Food Waste.

Polyhydroxyalkanoates (PHA) is an emerging biodegradable plastic family that can replace a broad spectrum of conventional thermoplastics and is promising in the sustainable process development and valorization of organic waste. This study established a novel production system of PHA from food waste through halophilic microbial fermentation with spent medium recycling. The essential processing parameters for batch cultivation of Haloferax mediterranei were optimized for food waste substrate (a 40 g/L loading and 2.5 vvm of aeration), which achieved a yield of 0.3 g PHA/g COD consumed. A batch bioreactor system was developed, which produced 7.0 ± 0.7 g/L cell dry mass and 4.5 ± 0.2 g/L PHA with a 20% dissolved oxygen (DO) level. A DO above 50% saturation resulted in faster cell growth and similar cell mass production but 25% less PHA production. The spent saline medium, treated with H2O2 and rotary evaporation, was successfully reused for four consecutive batches and provided consistent PHA concentrations and product qualities.

Halophyte biorefinery for polyhydroxyalkanoates production from Ulva sp. Hydrolysate with Haloferax mediterranei in pneumatically agitated bioreactors and ultrasound harvesting.

The present study tested the outdoor cultivation of Haloferax mediterranei for PHA production from green macroalgae Ulva sp. in pneumatically agitated bioreactors and applied ultrasonic separation for enhanced settling of archaeal cells. Scaled-up cultivation (40 L) yielded maximum biomass productivity of 50.1 ± 0.11 mg·L-1·h-1 with a PHA productivity of 27 ± 0.01 mg·L-1·h-1 and conversion yield of 0.107 g PHA per gram UlvaDW. The maximum mass fraction of PHA achieved in biomass was calculated to be 56% w/w. Ultrasonic harvesting of Hfx. mediterranei cells approached 30% removal at energy inputs around 7.8 kWh·m-3, and indicated no significant aggregation enhancement by Ca2+ addition. Molecular weight analysis showed an increase in Polydispersity Index (PDI) when the corresponding air velocities were increased suggesting that the polymer was more homogeneous at lower mixing velocities. The current study demonstrated scalable processes for PHA production using Ulva sp. feedstock providing new technologies for halophilic biorefinery.