The small heat shock protein Hsp20.8 imparts tolerance to high temperatures in the leafminer fly, Liriomyza trifolii (Diptera: Agtomyzidae).

As an environmental factor, temperature impacts the distribution of species and influences interspecific competition. The molecular chaperones encoded by small heat shock proteins (sHsps) are essential for rapid, appropriate responses to environmental stress. This study focuses on Hsp20.8, which encodes a temperature-responsive sHsp in Liriomyza trifolii, an insect pest that infests both agricultural and ornamental crops. Hsp20.8 expression was highest at 39℃ in L. trifolii pupae and adults, and expression levels were greater in pupae than in adults. Recombinant Hsp20.8 was expressed in Escherichia coli and conferred a higher survival rate than the empty vector to bacterial cells exposed to heat stress. RNA interference experiments were conducted using L. trifolii adults and prepupae and the knockdown of Hsp20.8 expression increased mortality in L. trifolii during heat stress. The results expand our understanding of sHsp function in Liriomyza spp. and the ongoing adaptation of this pest to climate change. In addition, this study is also important for predicting the distribution of invasive species and proposing new prevention and control strategies based on temperature adaptation.

Defluorination study of spent carbon cathode by microwave high-temperature roasting.

Spent carbon cathode (SCC) produced in the process of aluminum electrolysis is a typical toxic and hazardous solid waste. Therefore, the harmless treatment of SCC is extremely important for the green development of aluminum electrolysis industry. In this paper, the microwave-assisted high-temperature roasting technology was developed to remove fluorides in SCC for recycling of this cathode. The melting point, dielectric parameter, crystalline structure, surface chemical property, elemental composition, morphological structure, carbon graphitization and surface area were characterized using thermogravimetric analysis and differential scanning calorimetry, high-temperature composite conductivity analyzer, X-ray diffraction, X-ray fluorescence, X-ray photoelectron spectroscopy, scanning electronic microscopy, transmission electron microscopy, Raman spectroscopy and isothermal N2 adsorption-desorption method. The content of fluorides in raw and treated SCC was measured by ion activity meter. The results showed that the phase of sodium fluoride and cryolite would transform from solid to liquid when the temperature was higher than 1098.5 °C, and the SCC exhibited good performance on wave absorption with the action depth of 1 cm. The SCC was mainly composed of 57.94 wt% C, 14.23 wt% NaF, 1.80 wt%, CaF2, 15.06 wt% Na3AlF6, and 10.97 wt% Other. After treatment under microwave, the graphite carbon exhibited pitting structure and the fluorides could be effectively removed. In addition, the average layer spacing of graphite was increased from 0.34 to 0.36 nm. The defluorination of SCC could be enhanced with the increase of roasting temperature, which would attain 95.4% at 1500 °C. Compared with the traditional roasting method, the process under microwave showed more defects, which would provide a new guidance for the treatment and recycling of spent SCC.

Loss of bioactive microRNAs in cow's milk by ultra-high-temperature treatment but not by pasteurization treatment.

BACKGROUND: Milk microRNA (miRNA) with bioactivity is beneficial for human health. However, the effect of heat treatment on miRNA in milk is still not clear. In this study, the miRNAs in raw (RM), pasteurized (PM) and ultra-high-temperature (UHT) milk (UM) from the same batch were extracted, sequenced and analyzed. RESULTS: The results showed that there was a significant difference in miRNAs between RM and UM, but not between RM and PM. The total read counts of milk miRNAs were significantly decreased by heat treatment, with the least counts in UM (P < 0.05). The average length and GC percentage of miRNAs were significantly reduced by heat treatment (P < 0.05), while there was no significant difference in these terms between RM and PM. The content of miRNAs was verified by qPCR, finding that miR-17-5p, miR-25, miR-27b and miR-9-5p were significantly reduced in UM (P < 0.05) but not significantly affected in PM (except miR-27b). In addition, the targeting gene ontology enrichment functions of the different presented miRNAs were mostly enriched in biological process, cellular component and molecular function. The top 20 enriched miRNAs with different levels in heat-treated milk were identified by the Kyoto Encyclopedia of Genes and Genomes enrichment analysis. Interestingly, most of the functions of these miRNA targeting genes are involved in cancer or inflammation activity. CONCLUSION: This study revealed that the bioactive miRNA in RM was lost after UHT treatment but not in pasteurized treatment. © 2021 Society of Chemical Industry.

Simple derivation of skeletal muscle from human pluripotent stem cells using temperature-sensitive Sendai virus vector.

Human pluripotent stem cells have the potential to differentiate into various cell types including skeletal muscles (SkM), and they are applied to regenerative medicine or in vitro modelling for intractable diseases. A simple differentiation method is required for SkM cells to accelerate neuromuscular disease studies. Here, we established a simple method to convert human pluripotent stem cells into SkM cells by using temperature-sensitive Sendai virus (SeV) vector encoding myoblast determination protein 1 (SeV-Myod1), a myogenic master transcription factor. SeV-Myod1 treatment converted human embryonic stem cells (ESCs) into SkM cells, which expressed SkM markers including myosin heavy chain (MHC). We then removed the SeV vector by temporal treatment at a high temperature of 38℃, which also accelerated mesodermal differentiation, and found that SkM cells exhibited fibre-like morphology. Finally, after removal of the residual human ESCs by pluripotent stem cell-targeting delivery of cytotoxic compound, we generated SkM cells with 80% MHC positivity and responsiveness to electrical stimulation. This simple method for myogenic differentiation was applicable to human-induced pluripotent stem cells and will be beneficial for investigations of disease mechanisms and drug discovery in the future.

Adsorption Performance of Modified Graphite from Synthetic Dyes Solutions.

Due to the severe harmful impacts of industrial dyeing wastewater on ecosystems and human health, proper treatment is crucial. Herein, the use of modified graphite as an adsorbent for dyeing wastewater treatment was investigated in this study. The graphite was oxidized and intercalated using a phosphoric acid-nitric acid-potassium permanganate system and then thermally treated at high temperatures to optimize its structure. By adjusting the thermal treatment temperature, the graphite adsorbent with varying porosity was obtained. The optimized graphite demonstrated significant improvement in adsorption performance for dyes and organic compounds, achieving a removal rate of over 85% for methylene blue (MB) dye. The optimal adsorption performance is achieved with a 1.6 mg modified graphite adsorbent at 60 °C under alkaline conditions for adsorbing 10 ppm MB. Adsorption kinetics and isotherm models were applied to elucidate the adsorption mechanisms. The results fit the Langmuir model, suggesting that monolayer homogeneous adsorption is favorable. Importantly, the results demonstrate that high-temperature treatment can significantly enhance the adsorption properties of coal-based graphite, supporting its application in dyeing wastewater treatment.

Revealing the deterioration mechanism in gelling properties of pork myofibrillar protein gel induced by high-temperature treatments: Perspective on the protein aggregation and conformation.

The purpose of the present study was to investigate the mechanism of gel deterioration of myofibrillar proteins (MP) gels induced by high-temperature treatments based on the protein aggregation and conformation. The results showed that the gel strength and water holding capacity of MP obviously increased and then decreased as the temperature increased, reaching the maximum value at 80 °C (P < 0.05). The microstructure analysis revealed that appropriate temperature (80 °C) contributed to the formation of a more homogeneous, denser, and smoother three-dimensional mesh structure when compared other treatment temperatures, whereas excessive temperature (95 °C) resulted in the formation of heterogeneous and large protein aggregates of MP, decreasing the continuity of gel networks. This was verified by the rheological properties of MP gels. The particle size (D4,3 and D3,2) of MP obviously increased with larger clusters at excessive temperature, and the surface hydrophobicity of MP decreased (P < 0.05), which has been linked to the formation of soluble or insoluble protein aggregates. Tertiary structure and secondary structure results revealed that the proteins had a tendency to be more stretched under higher temperature treatments, which resulted in a decrease in covalent interactions and non-covalent interactions, fostering the over-aggregation of MP. Therefore, our present study indicated that the degradation of MP gels treated at high temperatures was explained by protein aggregation and conformational changes in MP.

Thermal Studies of Fractionated Lignite and Brown Coal Fly Ashes.

Coal fly ash (CFA), a by-product of coal combustion, is a valuable raw material for various applications. However, the heterogeneous nature of the composition and properties of CFA provides challenges to its effective usage and utilisation. This study investigates the thermal behaviour of the fly ashes of lignite (FA1) and brown coal (FA2) and their fractions obtained by dry aerodynamic separation. Thermal analysis techniques, including thermogravimetry (TG), differential scanning calorimetry (DSC), and evolved gas analysis (EGA), were used to characterise the behaviour of the fly ash fractions while heating up to 1250 °C. The results reveal distinct differences in the thermal behaviour between ash types and among their different size fractions. For the FA1 ashes, the concentration of calcium-rich compounds and the level of recrystallisation at 950 °C increased with the decrease in particle size. The most abundant detected newly formed minerals were anhydrite, gehlenite, and anorthite, while coarser fractions were rich in quartz and mullite. For the FA2 ashes, the temperature of the onset of melting and agglomeration decreased with decreasing particle size and was already observed at 995 °C. Coarser fractions mostly remain unchanged, with a slight increase in quartz, mullite, and hematite content. Recrystallisation takes place in less extension compared to the FA1 ashes. The findings demonstrate that the aerodynamic separation of fly ashes into different size fractions can produce materials with varied thermal properties and reactivity, which can be used for specific applications. This study highlights the importance of thermal analysis in characterising fly ash properties and understanding their potential for utilisation in various applications involving thermal treatment or exposure to high-temperature conditions. Further research on advanced separation techniques and the in-depth characterisation of fly ash fractions is necessary to obtain materials with desired thermal properties and identify their most beneficial applications.

Preparation and characterization of non-crystalline granular starch with low processing viscosity.

Non-crystalline granular starch (NCGS) has advantages in the deep processing of starch owing to its unique structure and function. In this study, NCGS was successfully prepared at a baking temperature of 210 °C, and the morphology, structure, pasting properties, and rheological properties of the NCGS were systematically studied. Compared with native starch, NCGS showed a lower processing viscosity and rapid reduction in the peak viscosity from 3795 to 147 cP. Furthermore, NCGS exhibited impaired short- and long-range ordered structures, as indicated by the lower ratio of absorbance at 1047/1015 cm-1 and decreased crystallinity compared to native starch. Additionally, amylose and amylopectin with long and medium chains in NCGS were degraded into short chains, resulting in an increase in amylose content and branch density. The analysis of the physicochemical properties of NCGS, especially the low processing viscosity, is of great importance for the industrial application of starch, particularly in terms of improving the yield, saving energy, and reducing environmental pollution.

Induction and Characterization of Tetraploid Through Zygotic Chromosome Doubling in Eucalyptus urophylla.

Improvements in plant growth can bring great benefits to the forest industry. Eucalyptus urophylla is an important plantation species worldwide, and given that ploidy increases are often associated with plant phenotype changes, it was reasoned that its polyploidization may have good prospects and great significance toward its cultivation. In this study, the zygotic development period of E. urophylla was observed through paraffin sections, and a correlation between the development time of flower buds after pollination and the zygotic development period was established. On this basis, it was determined that the 25th day after pollination was the appropriate time for a high temperature to induce zygotic chromosome doubling. Then tetraploid E. urophylla was successfully obtained for the first time through zygotic chromosome doubling induced by high temperature, and the appropriate conditions were treating flower branches at 44°C for 6 h. The characterization of tetraploid E. urophylla was performed. Chromosome duplication brought about slower growing trees with thicker leaves, larger cells, higher net photosynthetic rates, and a higher content of certain secondary metabolites. Additionally, the molecular mechanisms for the variation in the tetraploid's characteristics were studied. The qRT-PCR results showed that genes mediating the tetraploid characteristics showed the same change trend as those of the characteristics, which verified that tetraploid trait variation was mainly caused by gene expression changes. Furthermore, although the tetraploid had no growth advantage compared with the diploid, it can provide important germplasm resources for future breeding, especially for the creation of triploids.

Effect of a High-Temperature Treatment on Structural-Phase State and Mechanical Properties of IMC of the Ti-25Al-25Nb at.% System.

In this research, samples of an alloy with a bimodal structure were studied on the basis of a previously developed technology for obtaining hydrogen storage materials based on the Ti-Al-Nb system. The results of SPS of mechanically activated powder mixtures of the Ti-Al-Nb system at a temperature of 1300 °C make it possible to obtain an alloy with a predominantly bimodal structure. However, an insignificant presence of TiAl3, AlNb2 phases, and unreacted niobium is still observed in the structure. The mechanical properties of alloys of the Ti-Al-Nb system after sintering show abnormally low values of strength and ductility (less than 150 MPa). Two-stage heat treatment of alloys of the Ti-Al-Nb system leads to the decomposition of large precipitates of TiAl3 with the formation of O-phase nuclei, as well as to the complete dissolution of unreacted niobium and AlNb2 phases. Heat treatment of alloys of the Ti-Al-Nb system contributes to an increase in its strength by approximately 10 times (1310 MPa, MA-180), and ductility by 2 times (1322 MPa, MA-20). The surface fracture of samples obtained after testing is characterized by intergranular (intercrystalline) brittle fracture with "river" or "step" features.

Dielectric properties of calamansi (Citrus microcarpa) under high-temperature treatment.

High-temperature treatment of fruit is a developing way of decreasing nutrient loss and preventing decay. Its effect on calamansi (Citrus microcarpa) has not yet been reported. This study aims to study the effects of high-temperature treatment via dielectric properties. The results show that high-temperature treatment of calamansi suppresses the dielectric constant between 200 MHz and 20 GHz and alters loss factor between 200 MHz and 10 GHz. Storage at room temperature can affect loss factor between 4.5 and 10 GHz. These results may indicate that the dehydration process first affects the loss factor from 4.5 to 10 GHz, and then from 200 MHz to 4.5 GHz. This study may be favorable for evaluating calamansi's quality during storage and transportation. Moreover, the loss factor under 10 GHz is promising as an index for monitoring the water deficit and for assessing the adopted pre-treatment on calamansi. PRACTICAL APPLICATION: The quality inspector can use nondestructive examination ways to measure the dielectric property for evaluating Citrus microcarpa's quality and storage time after harvest. Moreover, the adopted pre-treatment may be speculated.

Nanoengineered Polycrystalline Diamond Composites with Advanced Wear Resistance and Thermal Stability.

Fluorinated grains of micrometer size diamonds overcoated with nanodiamond particles were used as a feedstock for high-pressure, high-temperature synthesis of new polycrystalline diamond composites (PDCs). Such a nanoengineering approach for exploring the interfacial chemistry of diamonds has been implemented in two methods: (i) infiltration of Co from the WC-Co layer into a fluorinated diamond layer with added Al and (ii) sintering of fluorinated micro- and nanosize diamond homogeneous mixtures with added Al and Co. We found that unlike commercial PDCs made with a metallic Co binder for drilling tools, the binding phase in new composites comprises only intermetallic compound AlCo or ternary carbide AlCo3C. As a result, composites made from homogeneous mixtures showed greater promise for improving the thermal stability, while the two-layer experimental composites during granite turning tests have demonstrated >2 times higher wear resistance than leached commercial PDCs.

Influence of Ultra-Heat Treatment on Properties of Milk Proteins.

Milk can be considered one of the primary sources of nutrients for the mammalian neonate. Therefore, milk and milk-based products, such as infant formula, whey protein isolate, different varieties of cheese, and others are prepared to meet the nutritional requirements of the consumer. Due to its significant nutritional components and perishable nature, a variety of pathogenic microorganisms can grow and multiply quickly in milk. Therefore, various heat treatments can be employed for the improvement of the shelf life of milk. In comparison to pasteurized milk, due to excessive and severe heating, UHT milk has a more cooked flavor. During storage, changes in the physicochemical properties of milk can lead to off-flavors, undesirable browning, separation of fat, sediment formation, or gelation during the subsequent storage. Several important factors such as processing parameters, time-temperature abuse (storage condition), and packaging type also influence the quality characteristics and consumer acceptance of the milk; however, the influence of heat treatments on milk protein is inconstant. The major protein modifications that occur during UHT treatment are denaturation and aggregation of the protein, and chemical modifications of its amino acids. These UHT-induced protein alterations can change digestibility and the overall biological influence of the intake of these proteins. Therefore, this review is focused on the influence of UHT on the physicochemical and structural attributes of milk proteins during storage. There are many indications of milk proteins present in the UHT milk, and milk products are altered during processing and storage.

Starch-fatty acid complexes improve the gel properties and enhance the fatty acid content of Nemipterus virgatus surimi under high-temperature treatment.

The effect of high amylose corn starch (HAS)-fatty acid complexes on the gel properties, protein secondary structure, microstructure, fatty acid content, and sensory properties of surimi under high-temperature treatment were investigated. The formation of HAS-fatty acid complexes increased melting temperature and decreased average particle size of HAS. The addition of HAS-fatty acid complexes significantly improved the breaking force, deformation and whiteness of surimi gels. The water in surimi gels containing HAS or HAS-fatty acid complexes became increasingly immobilized. HAS or HAS-fatty acid complexes promoted protein conformational transition from α-helix structure to other three secondary structure. Surimi gels added with HAS-fatty acid complexes had more compact network structure and higher fatty acid content. Moreover, the better sensory properties were obtained in surimi gels containing HAS-fatty acid complexes. Therefore, starch-fatty acid complexes not only could improve the gel properties of surimi, but also enhance its fatty acid content.

In Vitro Bioeffects of Polyelectrolyte Multilayer Microcapsules Post-Loaded with Water-Soluble Cationic Photosensitizer.

Microencapsulation and targeted delivery of cytotoxic and antibacterial agents of photodynamic therapy (PDT) improve the treatment outcomes for infectious diseases and cancer. In many cases, the loss of activity, poor encapsulation efficiency, and inadequate drug dosing hamper the success of this strategy. Therefore, the development of novel and reliable microencapsulated drug formulations granting high efficacy is of paramount importance. Here we report the in vitro delivery of a water-soluble cationic PDT drug, zinc phthalocyanine choline derivative (Cholosens), by biodegradable microcapsules assembled from dextran sulfate (DS) and poly-l-arginine (PArg). A photosensitizer was loaded in pre-formed [DS/PArg]4 hollow microcapsules with or without exposure to heat. Loading efficacy and drug release were quantitatively studied depending on the capsule concentration to emphasize the interactions between the DS/PArg multilayer network and Cholosens. The loading data were used to determine the dosage for heated and intact capsules to measure their PDT activity in vitro. The capsules were tested using human cervical adenocarcinoma (HeLa) and normal human dermal fibroblast (NHDF) cell lines, and two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Our results provide compelling evidence that encapsulated forms of Cholosens are efficient as PDT drugs for both eukaryotic cells and bacteria at specified capsule-to-cell ratios.

High-Temperature Oxidation of Heavy Boron-Doped Diamond Electrodes: Microstructural and Electrochemical Performance Modification.

In this work, we reveal in detail the effects of high-temperature treatment in air at 600 °C on the microstructure as well as the physico-chemical and electrochemical properties of boron-doped diamond (BDD) electrodes. The thermal treatment of freshly grown BDD electrodes was applied, resulting in permanent structural modifications of surface depending on the exposure time. High temperature affects material corrosion, inducing crystal defects. The oxidized BDD surfaces were studied by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM), revealing a significant decrease in the electrode activity and local heterogeneity of areas owing to various standard rate constants. This effect was correlated with a resultant increase of surface resistance heterogeneity by scanning spreading resistance microscopy (SSRM). The X-ray photoelectron spectroscopy (XPS) confirmed the rate and heterogeneity of the oxidation process, revealing hydroxyl species to be dominant on the electrode surface. Morphological tests using scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed that prolonged durations of high-temperature treatment lead not only to surface oxidation but also to irreversible structural defects in the form of etch pits. Our results show that even subsequent electrode rehydrogenation in plasma is not sufficient to reverse this surface oxidation in terms of electrochemical and physico-chemical properties, and the nature of high-temperature corrosion of BDD electrodes should be considered irreversible.

Self-Assembled Nano-Fe3C Embedded in Reduced Graphene Oxide Aerogel with Efficient Fenton-Like Catalysis.

Aiming at the removal of refractory organic pollutants in aqueous solution, self-assembled nano-Fe3C embedded in reduced graphene oxide (nano-Fe3C@RGO) aerogel was prepared by hydrothermal synthesis and high temperature treatment, and characterized by SEM, HRTEM, pore size distribution, XRD, XPS and FTIR. The results showed that the aerogel was porous, and most of the Fe3C particles were less than 100 nm in size. They were evenly dispersed and embedded in the RGO aerogel. Furthermore, the mapping images confirmed that the elements of carbon, nitrogen and iron were homogeneously distributed. Moreover, the specific surface area of the aerogel was up to 324.770 m2/g and most of the pore sizes were between 5 and 10 nm. The formation of nano-Fe3C was identified by XRD pattern and HRTEM. Analysis of an XPS spectrum indicates that the nano-Fe3C was embedded in the graphene layer. The aerogel contained a large number of functional groups, including -NH2-NH and -C=O, etc., which greatly strengthened the adsorption of organics. Finally, the Fenton-like catalytic degradation properties of the self-assembled nano-Fe3C@RGO aerogel were investigated by testing the removal of methyl orange from the aqueous solution. The results showed that the value of Ct/C0 decreased to 0.050 after 240 min, suggesting a high degradation rate was obtained. Meanwhile, the chemical reaction was verified in accordance with the first-order kinetic model, and the higher temperature was beneficial to the catalytic degradation. At the same time, methyl orange was degraded into small molecules by the hydroxyl and superoxide radicals generated during the reactions. Therefore, the self-assembled nano-Fe3C@RGO aerogel, as a novel Fenton-like catalyst, introduces a new approach in the field of treatment of refractory organic wastewater.

Transcriptome Profiling Insights the Feature of Sex Reversal Induced by High Temperature in Tongue Sole Cynoglossus semilaevis.

Sex reversal induced by temperature change is a common feature in fish. Usually, the sex ratio shift occurs when temperature deviates too much from normal during embryogenesis or sex differentiation stages. Despite decades of work, the mechanism of how temperature functions during early development and sex reversal remains mysterious. In this study, we used Chinese tongue sole as a model to identify features from gonad transcriptomic and epigenetic mechanisms involved in temperature induced masculinization. Some of genetic females reversed to pseudomales after high temperature treatment which caused the sex ratio imbalance. RNA-seq data showed that the expression profiles of females and males were significantly different, and set of genes showed sexually dimorphic expression. The general transcriptomic feature of pesudomales was similar with males, but the genes involved in spermatogenesis and energy metabolism were differentially expressed. In gonads, the methylation level of cyp19a1a promoter was higher in females than in males and pseudomales. Furthermore, high-temperature treatment increased the cyp19a1a promoter methylation levels of females. We observed a significant negative correlation between methylation levels and expression of cyp19ala. In vitro study showed that CpG within the cAMP response element (CRE) of the cyp19a1a promoter was hypermethylated, and DNA methylation decreased the basal and forskolin-induced activities of cyp19a1a promoter. These results suggested that epigenetic change, i.e., DNA methylation, which regulate the expression of cyp19a1a might be the mechanism for the temperature induced masculinization in tongue sole. It may be a common mechanism in teleost that can be induced sex reversal by temperature.

Determination of the effects of different high-temperature treatments on texture and aroma characteristics in Alaska pollock surimi.

This study tested the gel properties, quality of Alaska pollock surimi subjected to different temperature treatments. Results showed that when the heating temperature is 110°C, the water-holding capacity (WHC) and texture of the surimi and gel strength increased, but as the heating temperature increased, the gel strength decreased significantly (p < 0.05), and ultimately destroyed. The heating temperature had no significant effect on the whiteness of the surimi gel, although it did have a significant effect on volatile components (p < 0.05). Fourier transform infrared (FT-IR) spectroscopy suggested that with increasing temperature, protein secondary structure of the random coil received maximum damage, leading to protein aggregation and ultimately greatly reduced gel strength. At 100, 105, 110, 115, and 121°C, the surimi gel was determined 37, 46, 49, 52, and 56 volatile components, from of aldehydes, ketones, alcohols, hydrocarbons, and aromatic compounds. These results indicate that heat treatments have an important influence on the gel properties and volatile components of Alaskan pollock surimi gel, and the treatment parameters can be valuable for the production of ready-to-use minced fish products.

Carvacrol suppresses high pressure high temperature inactivation of Bacillus cereus spores.

The inactivation of bacterial spores generally proceeds faster and at lower temperatures when heat treatments are conducted under high pressure, and high pressure high temperature (HPHT) processing is, therefore, receiving an increased interest from food processors. However, the mechanisms of spore inactivation by HPHT treatment are poorly understood, particularly at moderately elevated temperature. In the current work, we studied inactivation of the spores of Bacillus cereus F4430/73 by HPHT treatment for 5 min at 600MPa in the temperature range of 50-100°C, using temperature increments of 5°C. Additionally, we investigated the effect of the natural antimicrobial carvacrol on spore germination and inactivation under these conditions. Spore inactivation by HPHT was less than about 1 log unit at 50 to 70°C, but gradually increased at higher temperatures up to about 5 log units at 100°C. DPA release and loss of spore refractility in the spore population were higher at moderate (≤65°C) than at high (≥70°C) treatment temperatures, and we propose that moderate conditions induced the normal physiological pathway of spore germination resulting in fully hydrated spores, while at higher temperatures this pathway was suppressed and replaced by another mechanism of pressure-induced dipicolinic acid (DPA) release that results only in partial spore rehydration, probably because spore cortex hydrolysis is inhibited. Carvacrol strongly suppressed DPA release and spore rehydration during HPHT treatment at ≤65°C and also partly inhibited DPA release at ≥65°C. Concomitantly, HPHT spore inactivation was reduced by carvacrol at 65-90°C but unaffected at 95-100°C.