Novel Applications of CE-ICP-MS/MS: Monitoring of Antiaging GHK-Cu Cosmetic Component Encapsulation in Liposomes.

The hyphenation of the separation technique with the high-sensitive mass spectrometry detection is one of the driving forces of modern analysis enabling measurements in complex matrices. In particular, capillary electrophoresis coupled to inductively coupled plasma tandem mass spectrometry allows for speciation analysis of selected analytes with a superior resolution. The mild, physiological-friendly conditions of this separation technique offer the unique advantage of analyzing chemical entities in their intact form, which has been successfully exploited in various areas. Herein, we report the pioneering application of such a hyphenated technique in the cosmetic field to investigate the encapsulation of copper tripeptide complex (GHK-Cu) in liposomes. By monitoring copper and phosphorus signals, the formation of liposomes via a simple ethanol injection method was confirmed, and the concentration of GHK-Cu in the liposomes was assessed. The application of coupling of capillary electrophoresis with inductively coupled plasma tandem mass spectrometry (CE-ICP-MS/MS) in cosmetic studies could lead to the development of diverse liposomal formulations with preferential properties and expand their accessibility.

Multi-element analysis of unfiltered samples in river water monitoring-digestion and single-run analyses of 67 elements.

Routine analysis of inorganic analytes in whole water samples from rivers (unfiltered river water) is rarely reported in scientific publications. However, this sample type is valuable and often used in long-term monitoring, regulation, and catchment element budgets, as it includes the dissolved, colloidal, and particulate fraction in one sample type. Preservation measures are not needed and solid-liquid partitioning can be disregarded, which simplifies automated sampling and storage procedures. In this study, we provide several digestion protocols for whole water samples from rivers and the subsequent multi-element analysis of 67 major, minor, and trace elements: Li, Be, B, Na, Mg, Al, Si, P, S, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ru, Ag, Cd, In, Sn, Sb, Te, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Ir, Pt, Au, Hg, Tl, Pb, Bi, Th, U. In the absence of whole water reference materials for inorganic analytes, we introduce simulated whole water samples by suspending sediment reference materials as quality control measures. The applicability for improved routine water quality monitoring was successfully tested on samples from different rivers revealing variations of the element fingerprints over time.

Determination of technology-critical elements in seafood reference materials by inductively coupled plasma-tandem mass spectrometry.

The certified reference materials (CRMs) BCR-668 (mussel tissue), NCS ZC73034 (prawn), NIST SRM 1566a (oyster tissue) and NIST SRM 2976 (mussel tissue) were analyzed for their mass fractions of 23 elements using inductively coupled plasma tandem-mass spectrometry (ICP-MS/MS). This study focused on the quantification of selected technology-critical elements (TCEs), specifically rare earth elements (REE) and the less studied TCEs Ga, Ge, Nb, In and Ta. Microwave assisted closed vessel digestion using an acid mixture of HNO3, HCl and H2O2 was applied to varying sample masses and two different microwave systems. Recoveries of 76% (Gd, NCS ZC73034) to 129% (Lu, BCR-668) were obtained for the REE and 83% (Ge, NCS ZC73034) to 127% (Nb, NCS ZC73034) for the less studied TCEs across all analyzed CRMs (compared to certified values) using the best-performing parameters. Mass fractions for all analyzed, non-certified elements are suggested and given with a combined uncertainty U (k = 2), including mass fractions for Ga (11 µg kg-1 ± 9 µg kg-1 to 67 µg kg-1 ± 8 µg kg-1) and In (0.4 µg kg-1 ± 0.3 µg kg-1 to 0.8 µg kg-1 ± 0.7 µg kg-1). This study provides mass fractions of possible new emerging contaminants and addresses the relevant challenges in quantification of less studied TCEs, thus allowing the application of existing CRMs for method validation in studies dealing with the determination of TCEs in seafood or other biota.

A novel analytical approach for the determination of ethylene-thiourea and propylene-thiourea in vegetal foodstuffs by high-performance liquid chromatography hyphenated to inductively coupled plasma-tandem mass spectrometry.

This study reports a novel analytical approach for the simultaneous determination of ethylene-thiourea (ETU) and propylene-thiourea (PTU) in fruits and vegetables by (reverse phase) high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma-tandem mass spectrometry (ICP-QQQMS or ICP-MS/MS). A baseline separation of ETU and PTU was achieved in less than 5 min. A robust method validation by using the accuracy profile approach was performed by carrying out four measurement series in duplicate at six different levels over a timespan of 4 weeks (different days). The recovery factors ranged from 87 to 101% for ETU and from 98 to 99% for PTU (depending on the spiking level). The coefficient of variation in terms of repeatability (CVr) ranged from 1 to 4.7% for ETU and from 1.8 to 3.9% for PTU (depending also on the analyte level) while the coefficient of variation in terms of intermediate reproducibility (CVR) ranged from 3.4 to 10% for ETU and from 1.8 to 10.8% for PTU. The limit of quantification was 0.022 mg kg-1 (wet weight) for ETU and 0.010 mg kg-1 (ww) for PTU. This novel approach was proved to be highly robust and suitable for the determination of ETU and PTU in foodstuffs of vegetal origin.

Low-level 40Ca determinations using nitrous oxide with reaction cell inductively coupled plasma-tandem mass spectrometry.

In inductively coupled plasma mass spectrometry, the most abundant Ca isotope (40Ca) suffers from isobaric interference with argon, hindering the potential for low detection limits of Ca. A powerful approach is to remove the interference by using a reaction gas in a reaction cell. Ammonia (NH3) has proven to be an effective reaction gas by process of a charge transfer reaction. However, NH3 is highly corrosive and toxic and cannot remove isobaric 40 K. Therefore, this work proposes the use of nitrous oxide (N2O) to mass shift the target analyte 40Ca to 40Ca16O+ as a non-corrosive and non-toxic alternative. Instrument performance testing demonstrated that N2O was capable of reaching equivalent detection limits (0.015 ng g-1) and background equivalence concentrations (0.041 ng g-1) to that of NH3 and limited by the blank only. Further investigation of matrix interferences with synthetic standards highlighted that the N2O approach supports the separation of potassium (K) and magnesium (Mg)-based interferences at tested concentrations of more than 600 times and almost 800 times higher than Ca respectively, whereas NH3 was found to only support the removal of Mg. This work highlights a clear advantage of N2O for low-level Ca determinations with high matrix loads, as well as compatibility with other instrumentation sensitive to corrosion that supports reaction cell technology.

Natural Deep Eutectic Solvents as a Key Metal Extractant for Fractionation in Speciation Analysis.

The research aimed to use natural deep eutectic solvents (NADES) as an extractant for fractionation of compounds of selected elements from young barley and to compare it with the fractionation of elements from certified element materials. The use of such a comparison made it possible to prove the possibility of extracting the same forms of elements (species) from different materials, which confirmed the option of using NADES as extractants in speciation analysis. The research was conducted with hyphenated techniques-separation by high-performance chromatography coupled to an isotope-specific detector, mass spectrometry (MS) with ionization in inductively coupled plasma (ICP)-which are widely used in speciation analysis. Natural deep eutectic solvents also help introduce Green Analytical Chemistry principles (GAC). According to the results of our studies, the use of different NADES permit the extraction of various metals from a single sample. Moreover, using other natural solvents of eutectic properties helps extract different species of a given metal.

Multi-Element Analysis and Origin Discrimination of Panax notoginseng Based on Inductively Coupled Plasma Tandem Mass Spectrometry (ICP-MS/MS).

Panax notoginseng is an important functional health product, and has been used worldwide because of a wide range of pharmacological activities, of which the taproot is the main edible or medicinal part. However, the technologies for origin discrimination still need to be further studied. In this study, an ICP-MS/MS method for the accurate determination of 49 elements was established, whereby the instrumental detection limits (LODs) were between 0.0003 and 7.716 mg/kg, whereas the quantification limits (LOQs) were between 0.0011 and 25.7202 mg/kg, recovery of the method was in the range of 85.82% to 104.98%, and the relative standard deviations (RSDs) were lower than 10%. Based on the content of multi-element in P. notoginseng (total of 89 mixed samples), the discriminant models of origins and cultivation models were accurately determined by the neural networks (prediction accuracy was 0.9259 and area under ROC curve was 0.9750) and the support vector machine algorithm (both 1.0000), respectively. The discriminant models established in this study could be used to support transparency and traceability of supply chains of P. notoginseng and thus avoid the fraud of geographic identification.

Determination of Glyphosate in White and Brown Rice with HPLC-ICP-MS/MS.

Background: In 2017, the European Commission renewed the approval of glyphosate (GLY) but only for five years. GLY remains one of the most controversial and studied molecules. Method: A simplified method was tested for the determination of GLY in white rice (WR) and brown rice (BR), after extraction only with a methanol solution, by liquid chromatography coupled with inductively coupled mass triple quadrupole (HPLC-ICP-MS/MS) with a PRP-X100 anionic column. After performing a test on groundwater, the quantification of GLY in WR and BR was validated in terms of the LOD, LOQ, accuracy, precision, linearity, and the matrix effect. Results: The LOD was 0.0027 mg kg−1 for WR and 0.0136 mg kg−1 for BR. The LOQ was 0.0092 mg kg−1 for WR and 0.0456 mg kg−1 for BR. The mean recoveries were within 76−105% at three fortification levels. The relative standard deviation for the analysis (five replicates for three spike levels) was < 11% for both matrices. A linear response was confirmed in all cases in the entire concentration range (R2WR = 1.000 and R2BR = 0.9818). Conclusion: The proposed method could be considered useful for the determination of GLY in different types of rice and designed and adapted for other cereals. The matrix effect, quantified in BR matrix extraction, could be avoided by using a matrix-matched calibration line.

Obtaining information from the brain in a non-invasive way: determination of iron in nasal exudate to differentiate hemorrhagic and ischemic strokes.

Background Differentiation between hemorrhagic and ischemic stroke is currently made by brain imaging or analyzing blood and cerebrospinal fluid (CSF) samples. After describing a new drainage route from brain to nasal mucosa, nasal exudate samples can be considered a new and promising source of biomarkers. Saliva can also be evaluated. Methods We determined iron in nasal exudate and saliva samples from patients of acute stroke during the first 48 h from onset. A simple, non-invasive sampling procedure was employed to obtain information from the brain. Samples were taken with a pre-weighed swab, solved in a 2% nitric acid solution and iron was measured by inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS). Results A significant difference in the dispersion of results of iron concentration for both stroke subtypes was observed in nasal exudate samples. The interquartile range was 0.608 nmol mg-1 of iron for hemorrhagic strokes and only 0.044 nmol mg-1 for ischemic strokes. In saliva samples, however, the values were 0.236 vs. 0.157 nmol mg-1. A cut-off limit of 0.102 nmol of iron per mg of nasal exudate provides a methodology with a 90% of sensitivity and a 90% of specificity. The value of the area under (AUC) the receiver operating characteristic curve (ROC) for nasal exudate samples is 0.960, considered as very good in which regards to its predictive value. Conclusions Non-invasive samples of nasal secretion have allowed obtaining, for the first time, information from the brain. Determination of iron in nasal exudate by ICP-MS allowed differentiation between ischemic and hemorrhagic strokes.

Ultra-trace element analysis of human follicular fluid by ICP-MS/MS: pre-analytical challenges, contamination control, and matrix effects.

Follicular fluid (FF), which is the fluid that envelops the developing oocyte (egg cell) in the ovary, can be analyzed to assess trace element content as well as to determine potential exposure to toxic elements in women seeking in vitro fertilization (IVF) treatment. Such measurements may be useful in establishing associations with potential adverse effects on oocyte viability and subsequent pregnancy outcomes. The principal goal of this study was to leverage the next generation of inorganic mass spectrometry based on ICP-MS/MS to address the numerous analytical challenges of (ultra-)trace element analysis of human FF specimens. Ultra-trace element measurements are defined by the Clinical Laboratory Standards Institute as fluid concentrations below 10 µg L-1 or tissue mass fractions below 1 µg g-1. Stringent pre-analytical procedures were developed to minimize exogenous contamination during FF specimen collection and storage in a prospective study of 56 women seeking IVF treatment. ICP-MS/MS instrumental parameters were carefully optimized, and the method validated for 11 biologically important elements that included 4 at trace levels (Cu, Se, Sr, and Zn) and 7 at ultra-trace levels (As, Cd, Co, Mo, Mn, Hg, and Pb). Method limits of detection (LODs) for ultra-trace elements varied from 5.6 ng L-1 for Cd to 0.11 µg L-1 for Mo. A total of 197 human FF specimens were analyzed using the proposed ICP-MS/MS method with 84% of specimens detectable for Pb and 100% detectable for Co, Cu, Mn, Mo, Sr, and Zn. The method based on ICP-MS/MS was compared to a previous method developed for FF using SF-ICP-MS.

Characterization of Arsenic in dried baby shrimp (Acetes sp.) using synchrotron-based X-Ray Spectrometry and LC coupled to ICP-MS/MS.

The arsenic content of dried baby shrimp (Acetes sp.) was investigated as part of an independent field study of human exposure to toxic metals/metalloids among the ethnic Chinese community located in Upstate New York. The dried baby shrimp were analyzed in a home environment using a portable X-ray Fluorescence (XRF) instrument based on monochromatic excitation. Study participants had obtained their dried baby shrimp either from a local Chinese market or prepared them at home. The shrimp are typically between 10-20 mm in size and are consumed whole, without separating the tail from the head. Elevated levels of As were detected using portable XRF, ranging between 5-30 µg/g. Shrimp samples were taken to the Cornell High Energy Synchrotron Source (CHESS) for Synchrotron Radiation µXRF (SR-µXRF) elemental mapping using a 384-pixel Maia detector system. The Maia detector provided high resolution trace element images for As, Ca, and Br, (among others) and showed localized accumulation of As within the shrimp's cephalothorax (head), and various abdominal segments. As quantification by SR-µXRF was performed using a Lobster hepatopancreas reference material pellet (NRC-CNRC TORT-2), with results in good agreement with both portable XRF and ICP-MS. Additional As characterization using µX-ray Absorption Near Edge Spectroscopy (µXANES) with the Maia XRF detector at CHESS identified arsenobetaine and/or arsenocholine as the possible As species present. Further arsenic speciation analysis by LC-ICP-MS/MS confirmed that the majority of As (>95%) is present as the largely non-toxic arsenobetaine species with trace amounts of arsenocholine, methylated As and inorganic As species detected.

Interference-free determination of sub ng kg-1 levels of long-lived 93Zr in the presence of high concentrations (µg kg-1) of 93Mo and 93Nb using ICP-MS/MS.

Long-lived high abundance radionuclides are of increasing interest with regard to decommissioning of nuclear sites and longer term nuclear waste storage and disposal. In many cases, no routine technique is available for their measurement in nuclear waste and low-level (ng kg-1) environmental samples. Recent advances in ICP-MS technology offer attractive features for the selective and sensitive determination of a wide range of long-lived radionuclides. In this work, inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS)-based methodology, suitable for accurate routine determinations of 93Zr at very low (ng kg-1) levels in the presence of high levels (µg kg-1) of the isobaric interferents 93Nb and 93Mo (often present in nuclear waste samples), is reported for the first time. Additionally, a novel and systematic strategy for method development based on the use of non-radioactive isotopes is proposed. It relies on gas-phase chemical reactions for different molecular ion formation to achieve isobaric interference removal. Using cell gas mixtures of NH3/He/H2 or H2/O2, and suitable mass shifts, the signal from the 93Nb and 93Mo isobaric interferences on 93Zr were suppressed by up to 5 orders of magnitude. The achieved limit of detection for 93Zr was 1.3 × 10-5 Bq g-1 (equivalent to 0.14 ng kg-1). The sample analysis time is 2 min, which represents a significant improvement in terms of sample throughput, compared to liquid scintillation counting methods. The method described here can be used for routine measurements of 93Zr at environmentally relevant levels. It can also be combined with radiometric techniques for use towards the standardisation of 93Zr measurements. Graphical abstract Interference-free determination of 93Zr in the presence of high concentrations of isobaric 93Mo and 93Nb by ICP-MS/MS.

Quantitative and Qualitative Analysis of Three Classes of Sulfur Compounds in Crude Oil.

Owing to the environmental hazards arising from sulfur-containing combustion products, strong legal regulations exist to reduce the sulfur content of transportation fuels down to a few ppm. With the ongoing depletion of low-sulfur crude oil reservoirs, increased technological efforts are needed for crude oil refining to meet these requirements. The desulfurization step is a critical part of the refining process but partly suffers from the recalcitrance of certain species to sulfur removal and the inability to quantitatively understand the behavior of individual compound classes during the process. We herein present a new and simple approach for the parallel quantification of three different classes of sulfur species present in crude oils by LC separation and on-line detection and quantification by ICP-MS/MS. This approach will help to estimate the amount of recalcitrant species and thus facilitate the optimization of desulfurization conditions during fuel production.

The microalgae's ability to accumulate selected trace elements studied by ICP-MS/MS and chemometric methods.

BACKGROUND: Microalgae can be used in different branches of industry, including cosmetology, pharmaceutics and the food industry, information on their ability to accumulate different elements becomes more important. The microalgae biomass grown in the media enriched in elements can increase the accumulation of different ions and give a possibility to control the contents of the various elements. METHODS: The aim of the study was to determine the total content of metals in microalgae by tandem mass spectrometry with inductively coupled plasma (ICP-MS/MS) and analysis of the contents of particular metals as a function of the type of microalgae and conditions of cultivation. As the adverse effects of metals on the health of humans and animals have been well-documented and the use of microalgae has increased, the knowledge of metal contents in them is of particular importance in control of their quality. RESULTS: Analysis of results permitted distinction of three main groups of microalgae with similar total metal content levels. Moreover, the results revealed the ways of stimulating more significant accumulation of selected elements (for example, Se concentration in control algae 0.279 µg g-1, in the algae cultivated in enriched medium - 219.7 µg g-1). They indicated the possible correlations between the accumulation of different ions. The result obtained shows a significant effect of metal accumulation and has a considerable impact on the differentiation of Arthrospira platensis grown in the medium enriched in different elements (selenium, zinc, chromium) (p ≤ 0.05). CONCLUSIONS: Particular impact on the content of selected elements had the conditions of cultivation (type of support) and the microalgae species. Although the one species as the most significant source of selected elements cannot be indicated, it is possible to control the accumulation by the composition of the medium.

The importance of ion kinetic energy for interference removal in ICP-MS/MS.

The effect of ion kinetic energy on gas phase ion reactivity with ICP-MS/MS was investigated in order to explore tuning strategies for interference removal. The collision/reaction gases CO2, N2O and O2 were used to observe the ion product distribution for 48 elements using an Agilent tandem ICP-MS (ICP-MS/MS) as a function of reaction gas flow rate (pressure) and ion kinetic energy. The kinetic energy of the incident ion was varied by adjusting the octopole bias (Voct). The three gases all form oxides (MO+) as the primary product with differing reaction enthalpies that result in distinct differences in the ion energies required for reaction with product ion distributions that vary with Voct. Consequently, by varying the ion kinetic energy (i.e., Voct), differences in interference reactivity can be used to achieve maximum separation. Three practical application examples were reported to demonstrate how the ion kinetic energy can be varied to achieve the ideal ion product distribution for interference resolution: CO2 for the removal of 238U in Pu analyses, CO2 for the removal of 40Ar16O vs. 56Fe, and O2 for the removal of Sm in Eu analyses, analogous to Pu/Am. The results demonstrate how the starting ion energy defined by Voct is an important factor to fully leverage the utility of any given reaction gas to remove interferences in the mass spectrum using ICP-MS/MS.

Assessment of TiO2 (nano)particles migration from food packaging materials to food simulants by single particle ICP-MS/MS using a high efficiency sample introduction system.

TiO2 is the most widely used white pigment in plastics and food packaging industry, thus the question of its migration towards food and hence the impact on consumers is raised. Since recent research indicate its potential toxicity, it is necessary to study TiO2 contamination as a consequence of food storage. For this purpose, plastic containers from commercially-available dairy products and custom-made TiO2-spiked polypropylene materials were put in contact with 50% (v/v) ethanol and 3% (w/v) acetic acid, which were used here as food simulants. The migration assays were carried out under standard contact conditions of packaging use (as recommended by Commission Regulation (EU) N° 10/2011 for food contact migration testing), and under conditions of extreme mechanical degradation of the packaging. The TiO2 (nano)particles released in the food simulants were analysed by single particle inductively coupled plasma-tandem mass spectrometry in mass-shift mode and using a high efficiency sample introduction system (APEX™ Ω) to avoid matrix effects from food simulants. For the dairy product containers and for the spiked polypropylene, results showed release of TiO2 particles of rather large sizes (average size: 164 and 175 nm, respectively) under mechanical degradation conditions, i.e. when the polymeric structure is damaged. The highest amounts of TiO2 were observed in 50% ethanol after 10 days of storage at 50 °C (0.62 ng cm-2) for the dairy product containers and after 1 day of storage at 50 °C (0.68 ng cm-2) for the spiked polypropylene. However, the level of Ti released in particle form was very small compared to the total Ti content in the packaging and far below the acceptable migration limits set by European legislation. Release under standard contact conditions of use of the container was not measurable, thus the migration of TiO2 particles from this packaging to dairy products among storage is expected to be negligible.

Levels of naturally occurring radioisotopes in local and imported bottled drinking water available in Québec City, Canada.

Consumption of local and imported bottled water in Canada has greatly increased during the past three decades. While the presence of natural radioactivity is often overlooked when dealing with the water quality of these bottled products, it could contribute substantially to the uptake of radionuclides especially when sourced from regions with higher radioactivity levels compared to where it is consumed. In this study, the activity of several naturally occurring radionuclides (i.e., 210Po, 226,228Ra, 230,232Th, 234,235,238U) were measured in bottled water available in Québec, Canada after sample pretreatment and analysis by either radiometric or mass spectrometry approaches. 230,232Th and 228Ra concentrations were below minimum detectable activity levels in all samples tested. Analytical results for 234U, 235U, 238U, and 226Ra showed concentrations that ranged from 0.38 to 115 mBq/L, (2.2-313) x 10-2 mBq/L, 0.48-58.4 mBq/L, and 1.1-550 mBq/L, respectively. 210Po was detected in only 5 samples and its activity ranged from 2 to 26 mBq/L. To determine variability in activity within brands, the same brands of bottled water were purchased during two consecutive years and analyzed. The possible radiological impact of the consumption of these types of water was assessed based on different drinking habit scenarios. Some of the imported water brands showed higher activity concentrations than local sources or tap water, suggesting that individuals drinking predominantly imported bottled water would receive a higher radiation dose than those who drink mainly local water.

Novel method for chlorine determination in biofuel lipid feedstock by coupling a total sample introduction system (hTISIS) to an inductively coupled plasma tandem mass spectrometry (ICP-MS/MS).

BACKGROUND: Chlorine concentrations above 1 mg kg-1 in lipid feedstocks for biofuel production can generate corrosion issues in the different refining units as well as catalyst deactivation by clogging or fouling. To reach accurate analyses by inductively coupled plasma (ICP) techniques at low concentration levels, dilution in organic solvents rises as a simpler and more straightforward sample preparation methodology than conventional sample decomposition procedures (e.g., microwave-assisted acid digestion). However, matrix effects and the impact of the Cl chemical form on the signal must be overcome to obtain accurate results. RESULTS: In this work, the high temperature torch integrated sample introduction system (hTISIS) operated at 350 °C is coupled to an inductively coupled plasma tandem mass spectrometry (ICP-MS/MS) for the determination of Cl in lipid biofuel feedstock samples diluted in xylene and these results are compared with those reported by a conventional sample introduction system. Under optimal conditions of the hTISIS-ICP-MS/MS configuration, matrix effects are efficiently overcome (recovery values ranged from 101 to 104%) as well as the effect of the Cl chemical form on the signal for 6 organochloride compounds. Thus, an external calibration approach can be set to carry out the quantification of this element in real samples. The method is successfully validated, obtaining a good agreement in the Cl concentration reported in a standard reference material (SRM NIST 1634c) and also by comparing the concentration results obtained by external calibration and standard addition approaches in two biofuel feedstock samples. SIGNIFICANCE AND NOVELTY: The hTISIS coupled to an ICP-MS/MS system is used for the first time to overcome not only matrix effects but also the impact of the Cl chemical form in biofuel feedstock samples. This novel method, with a limit of quantification (LOQ) of 7.1 µg kg-1, give access to an accurate Cl determination in all kind of lipid feedstocks for clean fuel production.

Validation of Mitra® VAMS® as a blood collection technique for trace elements analysis using ICP-MS/MS.

Background: Clinical dosage of toxic and essential elements in blood is well established and the collection method is still by venipuncture. This method has drawbacks and is not suited for everyone. Volumetric absorptive microsampling (VAMS) has been shown to have advantages over venipuncture. Materials & methods: Using inductively coupled plasma tandem mass spectrometry, a method for quantifying elements in whole blood sampled on VAMS was developed/validated. Method's performance was assessed by comparison with whole blood results. Results: Validation and performance assessment tests tend to show that most of the targeted elements provides accurate and reproducible results comparing to a method of reference. Conclusion: Overall, VAMS presents good preliminary results to eventually become an alternative to venipuncture for blood sampling for some trace elements analysis purposes.

A comparison of different approaches for the analysis of 36Cl in graphite samples.

This study compares different approaches for the quantification of the massic activity of 36Cl in graphite samples. All approaches consisted of a combustion step in combination with a trapping solution to collect the volatile elements. Two different resins were used to separate 36Cl from the matrix (CL resin and PS resin). Liquid scintillation counting (LSC), scintillation counting (SC) and tandem inductively coupled plasma mass spectrometry (ICP-MS/MS) were used to quantify 36Cl activity. The chemical yield in all approaches was determined by means of ion chromatography (IC). In addition, the methods were applied to a real activated graphite sample.