A critical review of MXene-based composites in the adsorptive and photocatalysis of hexavalent chromium removal from industrial wastewater.

The growing concern of water pollution is a critical issue stemming from industrialization and urbanization. One of the specific concerns within this broader problem is the toxicity associated with chromium (Cr), especially in its Cr (VI) form. Transition metal carbides/nitrides (MXenes) are attractive materials for the treatment of water due to their unique properties such as layered structure, high surface area, conductivity, flexibility, scalable manufacture, and surface functions. Adsorption and photocatalysis reactions are the two promising methods for the removal of Cr (VI) by using MXenes. Still, most of the previous reviews were limited to the single application area. Hence, this review covers recent developments in MXene-based composites, highlighting their dual role as both adsorbents and photocatalysts in the removal of Cr (VI). MXene-based composites are found to be effective in both adsorption and photodegradation of Cr (VI). Most MXene-based composites have demonstrated exceptional removal efficiency for Cr (VI), achieving impressive adsorption capacities ranging from 100 to 1500 mg g-1 and degradation percentages between 80% and 100% in a relatively short period. The active functional groups present on the surface of MXene have a viable impact on the adsorption and photodegradation performance. The mechanism of Cr (VI) removal is explained, with MXenes playing a key role in electrostatic attraction for adsorption and as co-catalysts in photocatalysis. However, MXene-based composites have limitations such as instability, competition with co-existing ions, and regeneration challenges. Further research is needed to address these limitations. Additionally, MXene-based composites hold promise for addressing water contamination, heavy metal removal, hydrogen production, energy storage, gas sensing, and biomedical applications.

Amendment of Sargassum oligocystum bio-char with MnFe2O4 and lanthanum MOF obtained from PET waste for fluoride removal: A comparative study.

The use of biomass and waste to produce adsorbent reduces the cost of water treatment. The bio-char of Sargassum oligocystum (BCSO) was modified with MnFe2O4 magnetic particles and La-metal organic framework (MOF) to generate an efficient adsorbent (BCSO/MnFe2O4@La-MOF) for fluoride ions (F-) removal from aqueous solutions. The performance of BCSO/MnFe2O4@La-MOF was compared with BCSO/MnFe2O4 and BCSO. The characteristics of the adsorbents were investigated using various techniques, which revealed that the magnetic composites were well-synthesized and exhibited superparamagnetic properties. The maximum adsorption efficiencies (BCSO: 97.84%, BCSO/MnFe2O4: 97.85%, and BCSO/MnFe2O4@La-MOF: 99.36%) were achieved under specific conditions of pH 4, F- concentration of 10 mg/L, and adsorbent dosage of 3, 1.5, and 1 g/L for BCSO, BCSO/MnFe2O4, and BCSO/MnFe2O4@La-MOF, respectively. The results demonstrated that the experimental data adheres to a pseudo-second-order kinetic model. The enthalpy, entropy, and Gibbs free energy were determined to be negative; thus, the F- adsorption was exothermic and spontaneous in the range of 25-50 °C. The equilibrium data of the process exhibited conformity with the Langmuir model. The maximum adsorption capacities of F- ions were determined as 10.267 mg/g for BCSO, 14.903 mg/g for the BCSO/MnFe2O4, and 31.948 mg/g for BCSO/MnFe2O4@La-MOF. The KF and AT values for the F- adsorption were obtained at 21.03 mg/g (L/mg)1/n and 100 × 10+9 L/g, indicating the pronounced affinity of the BCSO/MnFe2O4@La-MOF towards F- than other samples. The significant potential of the BCSO/MnFe2O4@La-MOF magnetic composite for F- removal from industrial wastewater, makes it suitable for repeated utilization in the adsorption process.

A novel ZIF-8@IL-MXene/poly (N-isopropylacrylamide) nanocomposite hydrogel toward multifunctional adsorption.

Phenols, dyes, and metal ions present in industrial wastewater can adversely affect the environment and leach biological carcinogens. Given that the current research focuses only on the removal of one or two of those categories. Herein, this work reports a novel ZIF-8@IL-MXene/Poly(N-isopropylacrylamide) (NIPAM) nanocomposite hydrogel that can efficiently and conveniently absorb and separate multiple pollutants from industrial wastewater. Ionic liquid (IL) was grafted onto MXene surfaces using a one-step method, and then incorporated into NIPAM monomer solutions to obtain the IL-MXene/PNIPAM composite hydrogel via in-situ polymerization. ZIF-8@IL-MXene/PNIPAM nanocomposite hydrogels were obtained by in-situ growth of ZIF-8 on the pore walls of composite hydrogels. As-prepared nanocomposite hydrogel showed excellent mechanical properties and can withstand ten repeated compressions without any damage, the specific surface area increased by 100 times, and the maximum adsorption capacities for p-nitrophenol (4-NP), crystal violet (CV), and copper ion (Cu2+) were 198.40, 325.03, and 285.65 mg g-1, respectively, at room temperature. The VPTTs of all hydrogels ranged from 33 to 35 °C, so the desorption process can be achieved in deionized water at 35-40 °C, and its adsorption capacities after five adsorption-desorption cycles decreased to 79%, 91%, and 29% for 4-NP, CV, and Cu2+, respectively. The adsorption data fitting results follow pseudo-second-order kinetics and Freundlich models, which is based on multiple interactions between the functional groups contained in hydrogels and adsorbent molecules. The hydrogel is the first to realize the high-efficiency adsorption of phenols, dyes and metal ions in industrial wastewater simultaneously, and the preparation process of hydrogels is environmentally friendly. Also, giving hydrogel multifunctional adsorption is beneficial to promote the development of multifunctional adsorption materials.

Bioremediation of petroleum refinery wastewater by fungal stains isolated from the fishing harbour of Bizerte (Mediterranean Sea).

The study was conducted in order to explore the potential of fungi isolated from surface and bottom seawater collected from the fishing harbour of Bizerte on the bioremediation of industrial effluent (IE) contaminated by petroleum hydrocarbon. Among the 128 fungal isolates, 11 were isolated from surface seawater and 7 from bottom seawater, representing 18 taxa in total. The gas chromatography mass spectrometry (GC-MS) was used for the determination of hydrocarbon compounds in IE. An initial screening of fungal growth using six concentrations ranged between 20 and 70% (v/v) IE has allowed the identification of the optimal concentration for fungal growth as well as selection of species able to tolerate high amounts of hydrocarbon. Colorimetric test employing 2,6-dichlorophenol indophenol and gravimetric method was applied for the assessment of fungal growth using 20% EI. By checking the phylogenetic affiliation of the high-performing stains as identified using ITSr DNA sequence, a dominance of Ascomycetes was detected. Indeed, Aspergillus terreus and Penicillium expansum may degrade 82.07 and 81.76% of residual total petroleum hydrocarbon (TPH), respectively. Both species were collected from surface seawater. While, Aspergillus niger, Colletotrichum sp and Fusarium annulatum displayed comparable degradation rates 40.43%, 41.3%, and 42.03%, respectively. The lowest rate of degradation 33.62% was detected in Emericellopsis phycophila. All those species were isolated from bottom seawater, excepting A. niger isolated from surface water. This work highlighted the importance of exploring the potential of fungi isolated from the natural environment on the bioremediation of industrial effluent. Our results promoted the investigation of the potential of the high-performing isolates A. terreus and P. expansum on the bioremediation of IE at pilot-scale and then in situ.

Efficient chromium removal from leather industrial wastewater in batch experimental study: Green synthesis and characterization of zinc oxide nanoparticles using Ficus benghalensis extracts.

The urgent need to address the severe environmental risk posed by chromium-contaminated industrial wastewater necessitates the development of eco-friendly cleanup methodologies. Utilizing the Ficus benghalensis plant extracts, the present study aims to develop green zinc oxide nanoparticles for the removal of Cr metal ions from wastewater. The leaves of Ficus benghalensis, often known as the banyan tree, were used to extract a solution for synthesizing ZnO NPs. These nanoparticles were developed with the goal of efficiently eliminating chromium (Cr) from industrial effluents. Batch studies were carried out to assess the efficiency of these synthesized ZnO NPs in treating leather industrial effluent, with aiming for optimal chromium removal. This involved measuring the nanoparticles' capacity to adsorb Cr ions from wastewater samples by comparing chromium levels before and after treatment. Removal efficiency for Cr was estimated through the batches such as optimization of pH, contact time, initial Cr concentration and sorbent dose of ZnO NPs were of the batches. These synthesized ZnO NPs were found to be successful in lowering chromium levels in wastewater to meet permissible limit. The nanoparticles exhibited their highest absorption capacity, reaching 94 % (46 mg/g) at pH 4, with a contact time of 7 hours with the optimum sorbent dose of 0.6 g/L. Hence, the excellent adsorption capabilities of these nanoparticles, together with their environmentally benign manufacturing technique, provide a long-term and efficient solution for chromium-contaminated wastewater treatment. Its novel nature has the potential to significantly improve the safety and cleanliness of water ecosystems, protecting the both i.e. human health and the environment.

Highly Selective Electrochemical Nitrate to Ammonia Conversion by Dispersed Ru in a Multielement Alloy Catalyst.

Electrochemical reduction of nitrate to ammonia (NH3) converts an environmental pollutant to a critical nutrient. However, current electrochemical nitrate reduction operations based on monometallic and bimetallic catalysts are limited in NH3 selectivity and catalyst stability, especially in acidic environments. Meanwhile, catalysts with dispersed active sites generally exhibit a higher atomic utilization and distinct activity. Herein, we report a multielement alloy nanoparticle catalyst with dispersed Ru (Ru-MEA) with other synergistic components (Cu, Pd, Pt). Density functional theory elucidated the synergy effect of Ru-MEA than Ru, where a better reactivity (NH3 partial current density of -50.8 mA cm-2) and high NH3 faradaic efficiency (93.5%) is achieved in industrially relevant acidic wastewater. In addition, the Ru-MEA catalyst showed good stability (e.g., 19.0% decay in FENH3 in three hours). This work provides a potential systematic and efficient catalyst discovery process that integrates a data-guided catalyst design and novel catalyst synthesis for a range of applications.

Offshore produced water treatment by a biofilm reactor on the seabed: The effect of temperature and matrix characteristics.

In many industrial processes a large amount of water with high salinity is co-produced whose treatment poses considerable challenges to the available technologies. The produced water (PW) from offshore operations is currently being discharged to sea without treatment for dissolved pollutants due to space limitations. A biofilter on the seabed adjacent to a production platform would negate all size restrictions, thus reducing the environmental impact of oil and gas production offshore. The moving bed biofilm reactor (MBBR) was investigated for PW treatment from different oilfields in the North Sea at 10 °C and 40 °C, corresponding to the sea and PW temperature, respectively. The six PW samples in study were characterized by high salinity and chemical oxygen demand with ecotoxic effects on marine algae S. pseudocostatum (0.4%

Alternative sequential combinations of electrocoagulation with electrooxidation and peroxi-coagulation for effective treatment of adhesive production industry wastewater.

Adhesive production industry wastewater can be characterized by high chemical oxygen demand (COD) sourced from high refractory organic contaminants and high total suspended solids (TSS) concentration. Biodegradability of the wastewater is low and wastewater quality is unstable. Various treatment processes have limited applicability in such characterized wastewater. In this study, the treatment performance of electrochemical processes was investigated. Because it is not possible to meet the discharge standards by application of only one process for high refractory organic content, sequential electrochemical processes were studied in this work. In the first step of the sequential process, electrocoagulation (EC) using Al electrodes by which better performance was achieved was applied. In the second step, electrooxidation (EO) and peroxi-coagulation (PC) processes were applied to the EC effluent. In EO, Ti/MMO was selected as the most effective anode whereas in PC, Fe was used as the anode, and graphite was used as the cathode. Box-Behnken Design was applied to optimize the operating conditions of EO and PC processes and to obtain mathematical model equations. In the EC process, 77% COD, 78.5% TSS, and 85% UV254 removal efficiency were obtained under the optimum conditions (pH 7.2, reaction time 35 min, and current density 0.5 mA/cm2). With the EO and PC processes applied to the effluent of EC, 68.5% COD, 77% TSS, and 83% UV254 removal and 77.5% COD, 87% TSS, and 86.5% UV254 removal were obtained, respectively. The specific energy consumption of EC-EO and EC-PC processes was 16.08 kWh/kg COD and 15.06 kWh/kg COD, respectively. Considering the treatment targets and process operating costs, it was concluded that both sequential electrochemical systems could be promising alternative systems for the treatment of adhesive production industry wastewater.

Next-generation hybrid technologies for the treatment of pharmaceutical industry effluents.

Water and industries are intangible units of the globe that are always set to meet the population's demand. The global population depends on one-third of freshwater increasing the demand. The increase in population along with urbanization has polluted the fresh water resources. The pharmaceutical industry is marked as an emerging contaminant of water pollution. The most common type of pharmaceutical drugs that are detected in the environment includes antibiotics, analgesics, NSAIDs, and pain-relieving drugs. These drugs alter the food chain of the organisms causing chaos mainly in the marine ecosystem. Pharmaceutical drugs are found only in shallow amounts (ng/mg) they have a huge impact on the living system. The consumption of water contaminated with pharmaceutical ingredients can disrupt reproduction, hormonal imbalance, cancer, and respiratory problems. Various methods are used to remove these chemicals from the environment. In this review, we mainly focused on the emerging hybrid technologies and their significance in the effective treatment of pharmaceutical wastewater. This review paper primarily elaborates on the merits and demerits of existing conventional technologies helpful in developing integrated technologies for the modern era of pharmaceutical effluent treatment. This review paper further in detail discusses the various strategies of eco-friendly bioremediation techniques namely biostimulation, bioaugmentation, bacterial degradation, mycoremediation, phytoremediation, and others for the ultimate removal of pharmaceutical contaminants in wastewater. The review makes clear that targeted and hybrid solutions are what the world will require in the future to get rid of these pharmacological prints.

Biochar mediated high-rate anaerobic bioreactors: A critical review on high-strength wastewater treatment and management.

Treatment of high-strength wastewater is critical for the aquatic environment and receiving water bodies around the globe. Untreated or partially treated high-strength wastewater may cause severe damage to the existing water bodies. Various high-rate anaerobic bioreactors have been developed in the last decades for treating high-strength wastewater. High-rate anaerobic bioreactors are effective in treating industrial wastewater and provide energy in the form of methane as well. However, the physical or chemical properties of high-strength industrial wastewater, sometimes, disrupt the functioning of a high-rate anaerobic bioreactor. For example, the disintegration of granular sludge in up flow anaerobic sludge blanket reactor or membrane blocking in an anaerobic membrane bioreactor are the results of a high-strength wastewater treatment which hamper the proper functioning and may harm the wastewater treatment plant economically. Biochar, if added to these bioreactors, may help to alleviate the ill-functioning of high-rate anaerobic bioreactors. The primary mechanisms by biochar work in these bioreactors are direct interspecies electron transfer, microbial immobilization, or gene level alternations in microbial structure. The present article explores and reviews the recent application of biochar in a high-rate anaerobic bioreactor treating high-strength industrial wastewater.

Effect of microalgae and bacteria inoculation on the startup of bioreactors for paper pulp wastewater and biofuel production.

The use of microalgae and bacteria as a strategy for the startup of bioreactors for the treatment of industrial wastewater can be a sustainable and economically viable alternative. This technology model provides satisfactory results in the nitrification and denitrification process for nitrogen removal, organic matter removal, biomass growth, sedimentation, and byproducts recovery for added-value product production. The objective of this work was to evaluate the performance of microalgae and bacteria in their symbiotic process when used in the treatment of paper pulp industry wastewater. The experiment, lasting fourteen days, utilized four bioreactors with varying concentrations in mgVSS/L of microalgae to bacteria ratio (R1-100:100, R2-100:300, R3-100:500, R4-300:100) in the startup process. Regarding the sludge volumetric index (SVI), the results show that the R1 and R2 reactors developed SVI30/SVI10 biomass in the range of 85.57 ± 7.33% and 84.72 ± 8.19%, respectively. The lipid content in the biomass of reactors R1, R2, R3 e R4 was 13%, 7%, 19%, and 22%, respectively. This high oil content at the end of the batch, may be related to the nutritional stress that the species underwent during this feeding regime. In terms of chlorophyll, the bioreactor with an initial inoculation of 100:100 showed better symbiotic growth of microalgae and bacteria, allowing exponential growth of microalgae. The total chlorophyll value for this bioreactor was 801.46 ± 196.96 µg/L. Biological removal of nitrogen from wastewater from the paper pulp industry is a challenge due to the characteristics of the effluent, but the four reactors operated in a single batch obtained good nitrogen removal. Ammonia nitrogen removal performances were 91.55 ± 9.99%, 72.13 ± 19.18%, 64.04 ± 21.34%, and 86.15 ± 30.10% in R1, R2, R3, and R4, respectively.

Sustainable power production from petrochemical industrial effluent using dual chambered microbial fuel cell.

Dual chambered microbial fuel cell (DMFC) is an advanced and effective treatment technology in wastewater treatment. The current work has made an effort to treat petrochemical industrial wastewater (PWW) as a DMFC substrate for power generation and organic substance removal. Investigating the impact of organic load (OL) on organic reduction and electricity generation is the main objective of this study. At the OL of 1.5 g COD/L, the highest total chemical oxygen demand (TCOD) removal efficiency of 88%, soluble oxygen demand (SCOD) removal efficiency of 80% and total suspended solids (TSS) removal efficiency of 71% were seen, respectively. In the same optimum condition of 1.5 g COD/L, the highest current and power density of about 270 mW/m2 and 376 mA/m2 were also observed. According to the results of this study, using high-strength organic wastewater in DMFC can assist in addressing the issue of the petrochemical industries and minimize the energy demand.

Complete long-term monitoring of greenhouse gas emissions from a full-scale industrial wastewater treatment plant with different cover configurations.

The greenhouse gas (GHG) emissions from wastewater treatment plants (WWTPs), consisting mainly of methane (CH4) and nitrous oxide (N2O), have been constantly increasing and become a non-negligible contributor towards carbon neutrality. The precise evaluation of plant-specific GHG emissions, however, remains challenging. The current assessment approach is based on the product of influent load and emission factor (EF), of which the latter is quite often a single value with huge uncertainty. In particular, the latest default Tier 1 value of N2O EF, 0.016 ± 0.012 kgN2O-N kgTN-1, is estimated based on the measurement of 30 municipal WWTPs only, without involving any industrial wastewater. Therefore, to resolve the pattern of GHG emissions from industrial WWTPs, this work conducted a 14-month monitoring campaign covering all the process units at a full-scale industrial WWTP in Shanghai, China. The total CH4 and N2O emissions from the whole plant were, on average, 447.7 ± 224.5 kgCO2-eq d-1 and 1605.3 ± 2491.0 kgCO2-eq d-1, respectively, exhibiting a 5.2- or 3.9-times more significant deviation than the influent loads of chemical oxygen demand (COD) or total nitrogen (TN). The resulting EFs, 0.00072 kgCH4 kgCOD-1 and 0.00211 kgN2O-N kgTN-1, were just 0.36% of the IPCC recommended value for CH4, and 13.2% for N2O. Besides, the parallel anoxic-oxic (A/O) lines of this industrial WWTP were covered in two configurations, allowing the comparison of GHG emissions from different odor control setup. Unit-specific analysis showed that the replacement of enclosed A/open O with enclosed A/O reduced the CH4 EF by three times, from 0.00159 to 0.00051 kgCH4 kgCOD-1, and dramatically decreased the N2O EF by an order of magnitude, from 0.00376 to 0.00032 kgN2O-N kgTN-1, which was among the lowest of all full-scale WWTPs.

Heavy metals removal from industrial wastewater of Biskra (Algeria) by Arundo donax and Phragmites australis.

Industrial effluents pose a serious environmental problem, because they contain toxic contaminants mainly heavy metals that are the most dangerous to humans, animals, plants, and the environment in general. Phytoremediation using macrophytes is an adopted technique for the environment decontamination due to its efficiency and cost-effectiveness. The present study aims to highlight the capabilities of macrophytes to remove heavy metals from wastewater of Biskra region (Algeria). The methodology consists of filling out the filters planted with Arundo donax and Phragmites australis with raw industrial wastewater, then recovering decontaminated water after 15 days to assess removal of lead, copper, zinc, and iron. Both plants had shown a good efficiency for the removal of metals loaded in wastewater eliminating about 94 to 98% of initial concentration. In addition, calculated bioaccumulation factor (BAF) had confirmed the accumulation of heavy metals in different parts of experimental plants; recorded values of BAF > 1 allowed the consideration of Arundo donax and Phragmites australis as good hyper-accumulator plants. Obtained results confirm the efficiency of phytoremediation technology using macrophytes for the wastewater treatment in particular and the environment decontamination in general.

Potential strategies for phytoremediation of heavy metals from wastewater with circular bioeconomy approach.

Water pollution is an inextricable problem that stems from natural and human-related factors. Unfortunately, with rapid industrialization, the problem has escalated to alarming levels. The pollutants that contribute to water pollution include heavy metals (HMs), chemicals, pesticides, pharmaceuticals, and other industrial byproducts. Numerous methods are used for treating HMs in wastewater, like ion exchange, membrane filtration, chemical precipitation, adsorption, and electrochemical treatment. But the remediation through the plant, i.e., phytoremediation is the most sustainable approach to remove the contaminants from wastewater. Aquatic plants illustrate the capacity to absorb excess pollutants including organic and inorganic compounds, HMs, and pharmaceutical residues present in agricultural, residential, and industrial discharges. The extensive exploitation of these hyperaccumulator plants can be attributed to their abundance, invasive mechanisms, potential for bioaccumulation, and biomass production. Post-phytoremediation, plant biomass can be toxic to both water bodies and soil. Therefore, the circular bioeconomy approach can be applied to reuse and repurpose the toxic plant biomass into different circular bioeconomy byproducts such as biochar, biogas, bioethanol, and biodiesel is essential. In this regard, the current review highlights the potential strategies for the phytoremediation of HMs in wastewater and various strategies to efficiently reuse metal-enriched biomass material and produce commercially valuable products. The implementation of circular bioeconomy practices can help overcome significant obstacles and build a new platform for an eco-friendlier lifestyle.

Natural marmatite photocatalyst for treatment of mineral processing wastewater to help zero wastewater discharge.

Mineral processing wastewater (MPW) with large discharge and high toxicity affects environmental safety, and the realizing zero discharge of MPW is of great significance for reducing environmental pollution, saving water resources, and promoting the sustainable development of the mining industry. In this study, we reported natural marmatite (NM) as a low-cost and efficient photocatalyst for the treatment of MPW to help zero wastewater discharge. The photocatalytic activity of NM was evaluated by the removal of total organic carbon (TOC) from MPW under visible-light illumination, and the optimal degradation conditions were discussed. Results showed that superoxide free radicals (·O2-) were the dominant active species responsible for organic pollutants degradation, and 74.25% TOC removal was obtained after 120 min reaction under the optimum treatment conditions. Meanwhile, the wastewater treated by NM photocatalysis can be reused in the flotation system without adverse impact on the product index. Based on these findings, a model of zero wastewater discharge for flotation with the help of photocatalytic treatment was established, it indicated that the water of the whole system can be balanced without affecting the ore dressing index, which showed that visible light-driven photocatalyst has a promising application prospect in the treatment and recycling of industrial wastewater.

The microbiome of two strategies for ammonia removal with the sequencing batch moving bed biofilm reactor treating cheese production wastewater.

IMPORTANCE: Cheese production facilities must abide by sewage discharge bylaws that prevent overloading municipal water resource recovery facilities, eutrophication, and toxicity to aquatic life. Compact treatment systems can permit on-site treatment of cheese production wastewater; however, competition between heterotrophs and nitrifiers impedes the implementation of the sequencing batch moving bed biofilm reactor (SB-MBBR) for nitrification from high-carbon wastewaters. This study demonstrates that a single SB-MBBR is not feasible for nitrification when operated with anerobic and aerobic cycling for carbon and phosphorous removal from cheese production wastewater, as nitrification does not occur in a single reactor. Thus, two reactors in series are recommended to achieve nitrification from cheese production wastewater in SB-MBBRs. These findings can be applied to pilot and full-scale SB-MBBR operations. By demonstrating the potential to implement partial nitrification in the SB-MBBR system, this study presents the possibility of implementing partial nitrification in the SB-MBBR, resulting in the potential for more sustainable treatment of nitrogen from cheese production wastewater.

Exploring the Evolution of Organofluorine-Containing Compounds during Simulated Photolithography Experiments.

One potential source of per- and polyfluoroalkyl substances (PFASs) in electronics fabrication wastewater are the organofluorine-containing compounds used in photolithography materials such as photoresists and top antireflective coatings (TARCs). However, the exact identities of these constituents are unknown and transformation reactions that may occur during photolithography may result in the formation of unknown or unexpected PFASs. To address this knowledge gap, we acquired five commercially relevant photolithography materials, characterized the occurrence of organofluorine-containing compounds in each material, and performed simulated photolithography experiments to stimulate any potential transformation reactions. We found that photoresists and TARCs have total fluorine (TF) concentrations in the g L-1 range, similar to the levels of other industrial and commercial products. However, the target and suspect PFASs present in these materials can only explain up to 20% of the TF in a material. We evaluated wastewater samples collected after simulated photolithography experiments and used a mass balance approach to assess the extent of transformations. Although a number of target, suspect, and nontarget PFASs were identified in the wastewater samples, the extent of transformation was limited and the fluorine contained in the PFASs could not explain more than an additional 1% of the TF in the photolithography materials.

Bioremoval of heavy metals from aqueous solution using dead biomass of indigenous fungi derived from fertilizer industry effluents: isotherm models evaluation and batch optimization.

The present work investigated the utilization of dead biomass of the highly multi-heavy metals tolerant indigenous fungal strain NRCA8 isolated from the mycobiome of fertilizer industry effluents that containing multiple heavy metal ions at high levels to remove Pb2+, Ni2+, Zn2+, and Mn2+ as multiple solutes from multi-metals aqueous solutions for the first time. Based on morphotype, lipotype and genotype characteristics, NRCA8 was identified as Cladosporium sp. NRCA8. The optimal conditions for the bioremoval procedure in the batch system were pH 5.5 for maximum removal (91.30%, 43.25%, and 41.50%) of Pb2+, Zn2+ and Mn2+ but pH 6.0 supported the maximum bioremoval and uptake of Ni2+ (51.60% and 2.42 mg/g) by NRCA8 dead biomass from the multi-metals aqueous solution, respectively. The 30 min run time supported the highest removal efficiency and uptake capacity of all heavy metals under study. Moreover, the equilibrium between the sorbent NRCA8 fungal biomass and sorbates Ni2+, Pb2+ and Zn2+ was attained after increasing the dead biomass dose to 5.0 g/L. Dead NRCA8 biomass was described by scanning electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared spectrometer before and after biosorption of Pb2+, Ni2+, Zn2+ and Mn2+ under multiple metals system. The Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich isotherms were applied to characterize the adsorption equilibrium between Pb2+, Ni2+, Mn2+ and Zn2+ and the adsorbent NRCA8. By comparing the obtained coefficient of regression (R2) by Freundlich (0.997, 0.723, 0.999, and 0.917), Langmiur (0.974, 0.999, 0.974, and 0.911) and Dubinin-Radushkevich (0.9995, 0.756, 0.9996 and 0.900) isotherms values for Pb2+, Zn2+, Ni2+ and Mn2+ adsorption, respectively, it was found that the isotherms are proper in their own merits in characterization the possible of NRCA8 for removal of Pb2+, Zn2+, Ni2+ and Mn2+. DKR isotherm is the best for Pb2+ and Ni2+ (0.9995 and 0.9996) while Langmiur isotherm giving a good fit to the Zn2+ sorption (0.9990) as well as Freundlich isotherm giving a good fit to the Mn2+ sorption (0.9170). The efficiencies of Cladosporium sp. NRCA8 dead biomass for bioremoval of heavy metals from real wastewater under the optimized conditions were Pb2+, Ag+, Mn2+, Zn2+ and Al3+ ˃ Ni2+ ˃ Cr6+ ˃ Co2+ ˃ Fe3+ ˃ Cu2+ ˃ Cd2+. Dead NRCA8 biomass showed efficient ability to adsorb and reduce harmful components in the industrial effluents to a level acceptable for discharge into the environment.

Anaerobic membrane bioreactor for carbon-neutral treatment of industrial wastewater containing N, N-dimethylformamide: Evaluation of electricity, bio-energy production and carbon emission.

The feasibility of anaerobic membrane bioreactor (AnMBR) for the treatment of N, N-dimethylformamide (DMF)-containing wastewater was theoretically compared with the conventional activated sludge (CAS) process in this study. The electricity consumption and expenditure, bio-energy production and CO2 emission were investigated using the operational results of a lab-scale AnMBR operated in a long-term operation. The AnMBR was capable of producing bio-methane from wastewater and generated 3.45 kWh/m3 of electricity as recovered bio-energy while the CAS just generated 1.17 kWh/m3 of electricity from the post-treatment of excessive sludge disposal. The large quantity of bio-methane recovered by the AnMBR can also be sold as sustainable bioresource for the use of household natural gas with a theoretical profit gain of 29,821 US$/year, while that of the CAS was unprofitable. The AnMBR was also demonstrated to significantly reduce the carbon emission by obtaining a theoretical negative CO2 production of -2.34 kg CO2/m3 with the recycle of bio-energy while that for the CAS was 4.50 kg CO2/m3. The results of this study demonstrate that the AnMBR process has promising potential for the carbon-neutral treatment of high-strength DMF-containing wastewater in the future.