Design principles of heterointerfacial redox chemistry for highly reversible lithium metal anode.

High electrochemical reversibility is required for the application of high-energy-density lithium (Li) metal batteries; however, inactive Li formation and SEI (solid electrolyte interface)-instability-induced electrolyte consumption cause low Coulombic efficiency (CE). The prior interfacial chemical designs in terms of alloying kinetics have been used to enhance the CE of Li metal anode; however, the role of its redox chemistry at heterointerfaces remains a mystery. Herein, the relationship between heterointerfacial redox chemistry and electrochemical transformation reversibility is investigated. It is demonstrated that the lower redox potential at heterointerface contributes to higher CE, and this enhancement in CE is primarily due to the regulation of redox chemistry to Li deposition behavior rather than the formation of SEI films. Low oxidation potential facilitates the formation of the surface with the highly electrochemical binding feature after Li stripping, and low reduction potential can maintain binding ability well during subsequent Li plating, both of which homogenize Li deposition and thus optimize CE. In particular, Mg hetero-metal with ultra-low redox potential enables Li metal anode with significantly improved CE (99.6%) and stable cycle life for 700 cycles at 3.0 mA cm-2. This work provides insight into the heterointerfacial design principle of next-generation negative electrodes for highly reversible metal batteries.

Revitalization of Diluent Amide-Based Electrolyte for Building High-Voltage Lithium-Metal Batteries.

Hitherto, highly concentrated electrolyte is the overarching strategy for revitalizing the usage of amide - in lithium-metal batteries (LMBs), which simultaneously mitigates the reactivity of amide toward Li and regulates uniform Li deposition via forming anion-solvated coordinate structure. However, it is undeniable that this would bring the cost burden for practical electrolyte preparation, which stimulates further electrolyte design toward tailoring anion-abundant Li+ solvation structure in stable amide electrolytes under a low salt content. Herein, a distinct method is conceived to design anions-enriched Li+ solvation structure in dilute amide-electrolyte (1 m Li-salt concentration) with the aid of integrating perfluoropolyethers (PFPE-MC) with anion-solvating ability and B/F-involved additives. The optimized electrolyte based on N,N-Dimethyltrifluoroacetamide (FDMAC) exhibits outstanding compatibility with Li and NCM622 cathode, facilitates uniform Li deposition along with robust solid electrolyte interphase (SEI) formation. Accordingly, both the lab-level LMB coin cell and practical pouch cell based on this dilute FDMAC electrolyte deliver remarkable performances with improved capacity and cyclability. This work pioneers the feasibility of diluted amide as electrolyte in LMB, and provides an innovative strategy for highly stable Li deposition via manipulating solvation structure within diluent electrolyte, impelling the electrolyte engineering development for practical high-energy LMBs.

In Situ Inorganic/Organic Protective Layer on Carbon Paper as Advanced Current Collector for Robust Li Metal Anode.

Lithium (Li) metal is regarded as the most promising anode for next-generation batteries with high energy density. However, the uncontrolled dendrite growth and infinite volume expansion during cycling seriously hinder the application of Li metal batteries (LMBs). Herein, an inorganic/organic protective layer (labeled as BPH), composed of in situ formed inorganic constituents and PVDF-HFP, is designed on the 3D carbon paper (CP) surface by hot-dipping method. The BPH layer can effectively improve the mechanical strength and ionic conductivity of the SEI layer, which is beneficial to expedite the Li-ion transfer of the entire framework and achieve stable Li plating/stripping behavior. As a result, the modified 3D CP (BPH-CP) exhibits an ultrahigh average Coulombic efficiency (CE) of ≈99.7% over 400 cycles. Further, the Li||LiFePO4 (LFP) cell exhibits an extremely long-term cycle life of over 3000 cycles at 5 C. Importantly, the full cell with high mass loading LiFePO4 (20 mg cm-2) or LiNi0.8Co0.1Mn0.1O2 (NCM, 16 mg cm-2) cathode exhibits stable cycling for 100 or 150 cycles at 0.5 C with high-capacity retention of 86.5% or 82.0% even at extremely low N/P ratio of 0.88 or 0.94. believe that this work enlightens a simple and effective strategy for the application of high-energy-density and high-rate-C LMBs.

Scalable Production of Thin and Durable Practical Li Metal Anode for High-Energy-Density Batteries.

Utilization of thin Li metal is the ultimate pathway to achieving practical high-energy-density Li metal batteries (LMBs), but its practical implementation has been significantly impeded by formidable challenges of poor thinning processability, severe interphase instability and notorious dendritic Li growth. Here we report a practical thin (10-40 µm) Li/Mo/Li2Se with concurrently modulated interphase and mechanical properties, achieved via a scalable mechanical rolling process. The in-situ generated Li2Se and Mo not only enhance the mechanical strength enabling the scalable fabrication of thin Li metal, but also promote homogenous Li electrodeposition. Significantly, the Li/Mo/Li2Se demonstrates ultrahigh-rate performance (15 mA cm-2) and ultralong-lifespan cycling sustainability (2700 cycles) with exceptional anti-pulverization capability. The Li|LiFePO4 cells show substantially prolonged cyclability over 1200 cycles with an ultralow decay rate of ~0.01% per cycle. Moreover, the Li|LiNi0.8Co0.1Mn0.1O2 pouch cells deliver enhanced cycling stability even under the extremely harsh conditions of low negative-to-positive-capacity (N/P) ratio of ~1.2 and lean electrolyte of ~0.95 g Ah-1, showing an exceptional energy density of 329.2 Wh kg-1. This work sheds light on facile pathway for scalable production of durable thin Li metal anode toward reliable practicability.

Tailoring Li Deposition by Regulating Structural Connectivity of Electrochemical Li Reservoir in Li-metal Batteries.

Irregular Li deposition is the major reason for poor reversibility and cycle instability in Li metal batteries, even leading to safety hazards, the causes of which have been extensively explored. The structural disconnection induced by completely dissolving Li in the traditional testing protocol is a key factor accounting for irregular Li growth during the subsequent deposition process. Herein, the critical role played by the structural connectivity of electrochemical Li reservoir in subsequent Li deposition behaviors is elucidated and a morphology-performance correlation is established. The structural connection and resultant well-distributed morphology of the in situ electrochemical Li reservoir ensure efficient electron transfer and Li+ diffusion pathway, finally leading to homogenized Li nucleation and growth. Tailoring the geometry of Li reservoir can improve the coulombic efficiency and cyclability of anode-free Li metal batteries by optimizing Li deposition behavior.

Li2ZnCu3 modified Cu current collector to regulate Li deposition.

Rationally designing a current collector that can maintain low lithium (Li) porosity and smooth morphology while enduring high-loading Li deposition is crucial for realizing the high energy density of Li metal batteries, but it is still challengeable. Herein, a Li2ZnCu3 alloy-modified Cu foil is reported as a stable current collector to fulfill the stable high-loading Li deposition. Benefiting from the in-situ alloying, the generated numerous Li2ZnCu3@Cu heterojunctions induce a homogeneous Li nucleation and dense growth even at an ultrahigh capacity of 12 mAh cm-2. Such a spatial structure endows the overall Li2ZnCu3@Cu electrode with the manipulated steric hindrance and outmost surface electric potential to suppress the side reactions during Li stripping and plating. The resultant Li||Li2ZnCu3@Cu asymmetric cell preserves an ultrahigh average Coulombic efficiency of 99.2% at 3 mA cm-2/6 mAh cm-2 over 200 cycles. Moreover, the Li-Li2ZnCu3@Cu||LiFePO4 cell maintains a cycling stability of 87.5% after 300 cycles. After coupling with the LiCoO2 cathode (4 mAh cm-2), the cell exhibits a high energy density of 407.4 Wh kg-1 with remarkable cycling reversibility at an N/P ratio of 3. All these findings present a doable way to realize the high-capacity, dendrite-free, and dense Li deposition for high-performance Li metal batteries.

Sulfonyl Molecules Induced Oriented Lithium Deposition for Long-Term Lithium Metal Batteries.

Dendrites growth and unstable interfacial Li+ transport hinder the practical application of lithium metal batteries (LMBs). Herein, we report an active layer of 2,4,6-trihydroxy benzene sulfonyl fluorine on copper substrate that induces oriented Li+ deposition and generates highly crystalline solid-electrolyte interphase (SEI) to achieve high-performance LMBs. The lithiophilic -SO2 - groups of highly crystalline SEI accept the rapidly transported Li+ ions and form a dense inner layer of LiF and Li3 N, which regulate Li+ plating morphology along the (110) crystal surface toward dendrite-free Li anode. Thus, Li||Cu cells with lithiophilic SEI achieve an average deposition efficiency of 99.8 % after 700 cycles, and Li||Li cells operate well for 1100 h. Besides, Li||LiNi0.8 Co0.1 Mn0.1 O2 cells with modified SEI exhibit a capacity retention that is 14 times than that of conventional SEI. Even at -60 °C, Li||Cu cells reach stable deposition efficiency of 83.2 % after 100 cycles.

The Mechanism of Li Deposition on the Cu Substrates in the Anode-Free Li Metal Batteries.

Due to the rapid growth in the demand for high-energy-density Lithium (Li) batteries and insufficient global Li reserves, the anode-free Li metal batteries are receiving increasing attention. Various strategies, such as surface modification and structural design of copper (Cu) current collectors, have been proposed to stabilize the anode-free Li metal batteries. Unfortunately, the mechanism of Li deposition on the Cu surfaces with the different Miller indices is poorly understood, especially on the atomic scale. Here, the large-scale molecular dynamics simulations of Li deposition on the Cu substrates are performed in the anode-free Li metal batteries. The results show that the surface properties of the Li panel can be altered through the different Cu substrate surfaces. Through surface similarity analysis, potential energy distributions,and inhomogeneous deposition simulations, it is found that the Li atoms exhibit different potential energy variances and kinetic characteristics on the different Cu surfaces. Furthermore, a proposal to reduce the fraction of the (110) facet in commercial Cu foils is made to improve the reversibility and stability of Li plating/stripping in the anode-free Li metal batteries.

Ionic Liquid Electrolyte with Weak Solvating Molecule Regulation for Stable Li Deposition in High-Performance Li-O2 Batteries.

Li-O2 batteries with bis(trifluoromethanesulfonyl)imide-based ionic liquid (TFSI-IL) electrolyte are promising because TFSI-IL can stabilize O2 - to lower charge overpotential. However, slow Li+ transport in TFSI-IL electrolyte causes inferior Li deposition. Here we optimize weak solvating molecule (anisole) to generate anisole-doped ionic aggregate in TFSI-IL electrolyte. Such unique solvation environment can realize not only high Li+ transport parameters but also anion-derived solid electrolyte interface (SEI). Thus, fast Li+ transport is achieved in electrolyte bulk and SEI simultaneously, leading to robust Li deposition with high rate capability (3 mA cm-2 ) and long cycle life (2000 h at 0.2 mA cm-2 ). Moreover, Li-O2 batteries show good cycling stability (a small overpotential increase of 0.16 V after 120 cycles) and high rate capability (1 A g-1 ). This work provides an effective electrolyte design principle to realize stable Li deposition and high-performance Li-O2 batteries.

Realizing Dendrite-Free Lithium Deposition with a Composite Separator.

A dendrite-free Li deposition strategy is developed with a composite separator of MnCO3 coated porous polypropylene. Mn2+ ions are preferentially reduced to form Mn nanoparticles on Li anodes, which helped to reduce the nucleation overpotential and achieve a dendrite-free deposition of Li bulky grains. When MnCO3 contacts the Li metal anode directly, an in situ artificial solid electrolyte interphase passivating layer was created from the reaction of Li metal, MnCO3 and liquid electrolyte. Li metal anodes show significantly improved stability for more than 2000 h of plating/stripping in Li||Li symmetric cells. The homemade ultrathin Li films on Cu foils (Li@Cu), obtained by electrochemical Li deposition with PP/MnCO3 separators, give enhanced cycling stability in LFP||Li@Cu cells. Combined with gel polymer electrolyte, the cycling stability of quasi-solid-state LFP||Li@Cu was further improved. This strategy for dendrite-free deposition via a composite separator provides a low-cost but efficient choice for alkaline metal batteries.

An Ionic Liquid Electrolyte with Enhanced Li+ Transport Ability Enables Stable Li Deposition for High-Performance Li-O2 Batteries.

Bis(trifluoromethanesulfonyl)imide-based ionic liquid (TFSI-IL) electrolyte could endow Li-O2 batteries with low charging overpotential. However, their weak Li+ transport ability (LTA) leads to non-uniform Li deposition. Herein, guided by Sand formula, the LTA of TFSI-IL electrolyte is greatly enhanced to realize robust Li deposition through introducing hydrofluoroether (HFE) and optimizing electrolyte component ratios to regulate solvation environment. The solvation environment changes from Li(TFSI)2 - ion pair into ionic aggregate clusters in the optimal electrolyte thanks to the slicing function of HFE toward ionic aggregate network. The transport parameters of Sand formula are synchronously enhanced, resulting in highly robust Li deposition behavior with greatly improved Coulombic efficiency (ca. 97.5 %) and cycling rate (1 mA cm-2 ). Cycling stability of Li-O2 batteries was greatly improved (a tiny overpotential rise of 64 mV after 75 cycles).

Resolution of Lithium Deposition versus Intercalation of Graphite Anodes in Lithium Ion Batteries: An In Situ Electron Paramagnetic Resonance Study.

In situ electrochemical electron paramagnetic resonance (EPR) spectroscopy is used to understand the mixed lithiation/deposition behavior on graphite anodes during the charging process. The conductivity, degree of lithiation, and the deposition process of the graphite are reflected by the EPR spectroscopic quality factor, the spin density, and the EPR spectral change, respectively. Classical over-charging (normally associated with potentials ≤0 V vs. Li+ /Li) are not required for Li metal deposition onto the graphite anode: Li deposition initiates at ca. +0.04 V (vs. Li+ /Li) when the scan rate is lowered to 0.04 mV s-1 . The inhibition of Li deposition by vinylene carbonate (VC) additive is highlighted by the EPR results during cycling, attributed to a more mechanically flexible and polymeric SEI layer with higher ionic conductivity. A safe cut-off potential limit of +0.05 V for the anode is suggested for high rate cycling, confirmed by the EPR response over prolonged cycling.

Nanoscale imaging of fundamental li battery chemistry: solid-electrolyte interphase formation and preferential growth of lithium metal nanoclusters.

The performance characteristics of Li-ion batteries are intrinsically linked to evolving nanoscale interfacial electrochemical reactions. To probe the mechanisms of solid electrolyte interphase (SEI) formation and to track Li nucleation and growth mechanisms from a standard organic battery electrolyte (LiPF6 in EC:DMC), we used in situ electrochemical scanning transmission electron microscopy (ec-S/TEM) to perform controlled electrochemical potential sweep measurements while simultaneously imaging site-specific structures resulting from electrochemical reactions. A combined quantitative electrochemical measurement and STEM imaging approach is used to demonstrate that chemically sensitive annular dark field STEM imaging can be used to estimate the density of the evolving SEI and to identify Li-containing phases formed in the liquid cell. We report that the SEI is approximately twice as dense as the electrolyte as determined from imaging and electron scattering theory. We also observe site-specific locations where Li nucleates and grows on the surface and edge of the glassy carbon electrode. Lastly, this report demonstrates the investigative power of quantitative nanoscale imaging combined with electrochemical measurements for studying fluid-solid interfaces and their evolving chemistries.

Observation and quantification of nanoscale processes in lithium batteries by operando electrochemical (S)TEM.

An operando electrochemical stage for the transmission electron microscope has been configured to form a "Li battery" that is used to quantify the electrochemical processes that occur at the anode during charge/discharge cycling. Of particular importance for these observations is the identification of an image contrast reversal that originates from solid Li being less dense than the surrounding liquid electrolyte and electrode surface. This contrast allows Li to be identified from Li-containing compounds that make up the solid-electrolyte interphase (SEI) layer. By correlating images showing the sequence of Li electrodeposition and the evolution of the SEI layer with simultaneously acquired and calibrated cyclic voltammograms, electrodeposition, and electrolyte breakdown processes can be quantified directly on the nanoscale. This approach opens up intriguing new possibilities to rapidly visualize and test the electrochemical performance of a wide range of electrode/electrolyte combinations for next generation battery systems.

Unraveling the Deposition and Dissolution Behavior of the Ag-Modified Li Surface Based on Electrochemical Atomic Force Microscopy.

Lithium is a promising anode material for advanced batteries because of its high capacity and low redox potential. However, its practical use is hindered by nonuniform Li deposition and dendrite formation, leading to safety concerns in Li metal batteries. Our study shows that Ag-based materials enhance the uniformity of Li deposition on Ag-modified Li (AgLi) surfaces, thereby addressing these key challenges. This improvement is due to the strong affinity of Ag for Li, which promotes uniform deposition and dissolution. Additionally, the AgLi surface demonstrated an improved cycling stability, which is crucial for long-term battery reliability. Emphasizing our analytical approach, we utilized comprehensive techniques such as Kelvin probe force microscopy (KPFM) and electrochemical atomic force microscopy (EC-AFM) to locally analyze the electrical properties and unravel the Li deposition/dissolution mechanisms. KPFM analysis provided crucial insights into surface potential variations, while EC-AFM highlighted topographical changes during the Li deposition and dissolution processes, contributing significantly to the development of safer and more efficient Li metal batteries.

Engineering Moderately Lithiophilic Paper-Based Current Collectors with Variable Solid Electrolyte Interface Films for Anode-Free Lithium Batteries.

Compared to traditional lithium metal batteries, anode-free lithium metal batteries use bare current collectors as an anode instead of Li metal, making them highly promising for mass production and achieving high-energy density. The current collector, as the sole component of the anode, is crucial in lithium deposition-stripping behavior and greatly impacts the rate of Li depletion from the cathode. In this study, to investigate the lithiophilicity effect of the current collector on the solid electrolyte interface (SEI) film construction and cycling performance of anode-free lithium batteries, various lightweight paper-based current collectors were prepared by electroless plating Cu and lipophilic Ag on low-dust paper (LDP). The areal densities of the as-prepared LDP@Cu, LDP@Cu-Ag, and LDP@Ag were approximately 0.33 mg cm-2. The use of lipophilic Ag-coated collectors with varying loadings allowed for the regulation of lipophilicity. The impacts of these collectors on the distribution of SEI components and Li depletion rate in common electrolytes were investigated. The findings suggest that higher loadings of lipophilic materials, such as Ag, on the current collector increase its lipophilicity but also lead to significant Li depletion during the cycling process in full-cell anode-free Li metal batteries. Thus, moderately lithiophilic current collectors, such as LDP@Cu-Ag, show more potential for Li deposition and striping and stable SEI with a low speed of Li depletion.

CaF2 nanoparticles enabling LiF-dominated solid electrolyte interphase for dendrite-free and ultra-stable lithium metal batteries.

The uncontrollable growth of Li dendrites and severe interfacial parasitic reactions on the Li anode are the primary obstacles to the practical application of lithium (Li) metal batteries. Effective artificial solid electrolyte interphase is capable of regulating uniform Li deposition and isolateing Li from electrolyte, thereby eliminating parasitic reactions. Herein, we rationally design a uniform LiF-dominated solid electrolyte interphase through an in-situ reaction between CaF2 nanoparticles and the Li anode, which allows dendrite-free Li deposition and restrains interfacial deterioration. Accordingly, the protective Li electrode demonstrated exceptional stability, sustaining over 6000 h at a current density of 2 mA cm-2 in symmetric cells and attaining over 1000 cycles with a low capacity decay rate of 0.015 % per cycle in coupling with LiFePO4 cathodes.

Anchoring Active Li Metal in Oriented Channel by In Situ Formed Nucleation Sites Enabling Durable Lithium-Metal Batteries.

Lithium metal is the ultimate anode material for pursuing the increased energy density of rechargeable batteries. However, fatal dendrites growth and huge volume change seriously hinder the practical application of lithium metal batteries (LMBs). In this work, a lithium host that preinstalled CoSe nanoparticles on vertical carbon vascular tissues (VCVT/CoSe) is designed and fabricated to resolve these issues, which provides sufficient Li plating space with a robust framework, enabling dendrite-free Li deposition. Their inherent N sites coupled with the in situ formed lithiophilic Co sites loaded at the interface of VCVT not only anchor the initial Li nucleation seeds but also accelerate the Li+ transport kinetics. Meanwhile, the Li2Se originated from the CoSe conversion contributes to constructing a stable solid-electrolyte interphase with high ionic conductivity. This optimized Li/VCVT/CoSe composite anode exhibits a prominent long-term cycling stability over 3000 h with a high areal capacity of 10 mAh cm-2. When paired with a commercial nickel-rich LiNi0.83Co0.12Mn0.05O2 cathode, the full-cell presents substantially enhanced cycling performance with 81.7% capacity retention after 300 cycles at 0.2 C. Thus, this work reveals the critical role of guiding Li deposition behavior to maintain homogeneous Li morphology and pave the way to stable LMBs.

A Large-Scale Fabrication of Flexible, Ultrathin, and Robust Solid Electrolyte for Solid-State Lithium-Sulfur Batteries.

All-solid-state lithium metal batteries (ASSLMBs) are considered as the most promising candidates for the next-generation high-safety batteries. To achieve high energy density in ASSLMBs, it is essential that the solid-state electrolytes (SSEs) are lightweight, thin, and possess superior electrochemical stability. In this study, a feasible and scalable fabrication approach to construct 3D supporting skeleton using an electro-blown spinning technique is proposed. This skeleton not only enhances the mechanical strength but also hinders the migration of Li-salt anions, improving the lithium-ion transference number of the SSE. This provides a homogeneous distribution of Li-ion flux and local current density, promoting uniform Li deposition. As a result, based on the mechanically robust and thin SSEs, the Li symmetric cells show outstanding Li plating/stripping reversibility. Besides, a stable interface contact between SSE and Li anode has been established with the formation of an F-enriched solid electrolyte interface layer. The solid-state Li|sulfurized polyacrylonitrile (Li|SPAN) cell achieves a capacity retention ratio of 94.0% after 350 cycles at 0.5 C. Also, the high-voltage Li|LCO cell shows a capacity retention of 92.4% at 0.5 C after 500 cycles. This fabrication approach for SSEs is applicable for commercially large-scale production and application in high-energy-density and high-safety ASSLMBs.

Impact of Glyme Ether Chain Length on the Interphasial Stability of Lithium-Electrode in High-Capacity Lithium-Metal Battery.

The realization of lithium-metal (Li) batteries faces challenges due to dendritic Li deposition causing internal short-circuit and low Coulombic efficiency. In this regard, the Li-deposition stability largely depends on the electrolyte, which reacts with Li to form a solid electrolyte interphase (SEI) with diverse physico-chemical properties, and dictates the interphasial kinetics. Therefore, optimizing the electrolyte for stability and performance remains pivotal. Hereof, glyme ethers are an emerging class of electrolytes, showing improved compatibility with metallic Li and enhanced stability in Li─Air and Li─Sulfur batteries. Yet, the criteria for selecting glyme solvents, particularly concerning Li deposition and dissolution processes, remain unclear. The SEI characteristics and Li deposition/dissolution processes are investigated in glyme-ether-based electrolytes with varying chain lengths, using lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium nitrate (LiNO3) salts under high capacity and limited electrolyte conditions. Longer glymes led to more homogeneous SEI, particularly pronounced with LiNO3, minimizing surface roughness during stripping, and promoting compact Li deposits. Higher reductive stability, resulting in homogeneous interphasial properties, and slower kinetics due to high desolvation barrier and viscosity, underline stable Li growth in longer glymes. This study clarifies factors guiding the selection of glyme ether-based electrolytes in Li metal batteries, offering insights for next-generation energy storage systems.