RESUMO
Plastics are widely used in daily lives, but unfortunately, their inadequate recycling practices have led to the accumulation of microplastics in the environment, posing a threat to public health. The existing methods for treating microplastics are energy-intensive and environmentally damaging. In this context, photoreforming has emerged as a sustainable solution to address the microplastic crisis by simultaneously recycling them into value-added chemicals. This review presents a comprehensive overview of the application of photoreforming for upcycling microplastic. The underlying mechanisms of photoreforming reaction are discussed, followed by the exploration of recent advancements and innovative strategies in photoreforming techniques with particular emphasis on their real-world applications and potential for large-scale implementation. Also, critical factors influencing the efficiency of microplastic photoreforming are identified, providing guidance for further research and optimization.
RESUMO
During synthetic textile washing, rubbing between fibres or against the washing machine, exacerbated by the elevated temperature, initiates the release of millions of microplastic fibres into the environment. A general tribological strategy is reported that practically eliminates the release of microplastic fibres from laundered apparel. The two-layer fabric finishes combine low-friction, liquidlike polymer brushes with "molecular primers", that is, molecules that durably bond the low-friction layers to the surface of the polyester or nylon fabrics. It is shown that when the coefficient of friction is below a threshold of 0.25, microplastic fibre release is substantially reduced, by up to 96%. The fabric finishes can be water-wicking or water-repellent, and their comfort properties are retained after coating, indicating a tunable and practical strategy toward a sustainable textile industry and plastic-free oceans and marine foodstuffs.
RESUMO
Polymer beads, especially polystyrene particles, have been extensively used as model species in insulator-based dielectrophoresis (iDEP) studies. Their use in alternating current iDEP (AC-iDEP) is less explored; however, an assessment in the low-frequency regime (≤10 kHz) allows to link surface conduction effects with the surface properties of polymer particles. Here, we provide a case study for various experimental conditions assessing sub-micrometer polystyrene particles with AC-iDEP and link to accepted surface conduction theory to predict and experimentally verify the observed AC-iDEP trapping behavior based on apparent zeta potential and solution conductivity. We find excellent agreement with the theoretical predictions, but also the occurrence of concentration polarization electroosmotic flow under the studied conditions, which have the potential to confound acting dielectrophoresis conditions. Furthermore, we study a case relevant to the assessment of microplastics in human and animal body fluids by mimicking the protein adsorption of high abundant proteins in blood by coating polystyrene beads with bovine serum albumin, a highly abundant protein in blood. Theoretical predictions and experimental observations confirm a difference in observed AC-iDEP behavior between coated and non-coated particles, which might be exploited for future studies of microplastics in blood to assess their exposure to humans and animals.
Assuntos
Eletroforese , Tamanho da Partícula , Poliestirenos , Soroalbumina Bovina , Poliestirenos/química , Eletroforese/métodos , Soroalbumina Bovina/química , Humanos , Condutividade Elétrica , Animais , Eletro-Osmose , Microplásticos/química , Adsorção , Propriedades de Superfície , BovinosRESUMO
Microscopic plastic (microplastic) pollutants threaten the earth's biodiversity and ecosystems. As a result of the progressive fragmentation of oversized plastic containers and products or manufacturing in small sizes, microplastics (particles of a diameter of 5 mm with no lower limit) are used in medicines, personal care products, and industry. The incidence of microplastics is found everywhere in the air, marine waters, land, and even food that humans and animals consume. One of the greatest concerns is the permanent damage that is created by plastic waste to our fragile ecosystem. The impossibility of the complete removal of all microplastic contamination from the oceans is one of the principal tasks of our governing body, research scientists, and individuals. Implementing the necessary measures to reduce the levels of plastic consumption is the only way to protect our environment. Cutting off the plastic flow is the key remedy to reducing waste and pollution, and such an approach could show immense significance. This review offers a comprehensive exploration of the various aspects of microplastics, encompassing their composition, types, properties, origins, health risks, and environmental impacts. Furthermore, it delves into strategies for comprehending the dynamics of microplastics within oceanic ecosystems, with a focus on averting their integration into every tier of the food chain.
RESUMO
Microplastics can be ingested by a wide range of aquatic animals. Extensive studies have demonstrated that microplastic ingestion-albeit often not lethal-can affect a range of species life-history traits. However, it remains unclear how the sublethal effects of microplastics on individual levels scale up to influence ecosystem-level dynamics through cascading trophic interactions. Here we employ a well-studied, empirically fed three-species trophic chain model, which was parameterized to mimic a common type of aquatic ecosystems to examine how microplastic ingestion by fish on an intermediate trophic level can produce cascading effects on the species at both upper and lower trophic levels. We show that gradually increasing microplastics in the ingested substances of planktivorous fish may cause population structure effects such as skewed size distributions (i.e. reduced average body length vs. increased maximal body size), and induce abrupt declines in fish biomass and reproduction. Our model analysis demonstrates that these abrupt changes correspond to an ecosystem-level tipping point, crossing which difficult-to-reverse ecosystem degradation can happen. Importantly, microplastic pollution may interact with other anthropogenic stressors to reduce safe operating space of aquatic ecosystems. Our work contributes to better understanding complex effects of microplastic pollution and anticipating tipping points of aquatic ecosystems in a changing world. It also calls attention to an emerging threat that novel microplastic contaminants may lead to unexpected and abrupt degradation of aquatic ecosystems, and invites systematic studies on the ecosystem-level consequences of microplastic exposure.
Assuntos
Microplásticos , Poluentes Químicos da Água , Animais , Ecossistema , Plásticos/efeitos adversos , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Peixes , Ingestão de AlimentosRESUMO
Despite some effectiveness of wastewater treatment processes, microplastics accumulate in sewage sludge and their further use may contribute to the release of plastic microplastics into the environment. There is an urgent need to reduce the amount of microplastics in sewage sludge. Plastic particles serve as solid substrates for various microorganisms, promoting the formation of microbial biofilms with different metabolic activities. The biofilm environment associated with microplastics will determine the efficiency of treatment processes, especially biological methods, and the mechanisms of organic compound conversion. A significant source of microplastics is the land application of sewage sludge from wastewater treatment plants. The detrimental impact of microplastics affects soil enzymatic activity, soil microorganisms, flora, fauna, and plant production. This review article summarizes the development of research related to microplastics and discusses the issue of microplastic introduction from sewage sludge. Given that microplastics can contain complex composite polymers and form a plastisphere, further research is needed to understand their potential environmental impact, pathogenicity, and the characteristics of biofilms in wastewater treatment systems. The article also discusses the physicochemical properties of microplastics in wastewater treatment plants and their role in biofilm formation. Then, the article explained the impact of these properties on the possibility of the formation of biofilms on their surface due to the peculiar structure of microorganisms and also characterized what factors enable the formation of specific plastisphere in wastewater treatment plants. It highlights the urgent need to understand the basic information about microplastics to assess environmental toxicity more rationally, enabling better pollution control and the development of regulatory standards to manage microplastics entering the environment.
Assuntos
Biofilmes , Microbiota , Microplásticos , Esgotos , Águas Residuárias , Microplásticos/análise , Águas Residuárias/microbiologia , Águas Residuárias/química , Esgotos/microbiologia , Esgotos/química , Eliminação de Resíduos Líquidos , Poluentes Químicos da Água/análise , Bactérias/classificação , Bactérias/metabolismo , Plásticos/químicaRESUMO
Microplastic mixtures are ubiquitously distributed in global ecosystems and include varying types. However, it remains unknown how microplastic diversity affects the biotic interactions of microbes. Here, we developed novel experiments of 600 microcosms with microplastic diversity ranging from 1 to 6 types and examined ecological networks for microbial communities in lake sediments after 2 months of incubation at 15 and 20 °C. We found that microplastic diversity generally enhanced the complexity of microbial networks at both temperatures, such as increasing network connectance and reducing average path length. This phenomenon was further confirmed by strengthened species interactions toward high microplastic diversity except for the negative interactions at 15 °C. Interestingly, increasing temperatures further exaggerated the effects of microplastic diversity on network structures, resulting in higher network connectivity and species interactions. Consistently, using species extinction simulations, we found that higher microplastic diversity and temperature led to more robust networks, and their effects were additionally and positively mediated by the presence of biodegradable microplastics. Our findings provide the first evidence that increasing microplastic diversity could unexpectedly promote the complexity and stability of microbial networks and that future warming could amplify this effect.
Assuntos
Microbiota , Poluentes Químicos da Água , Microplásticos , Plásticos , Ecossistema , Monitoramento Ambiental/métodos , Poluentes Químicos da Água/análiseRESUMO
Migration of microplastics (MPs) in soil-groundwater systems plays a pivotal role in determining its concentration in aquifers and future threats to the terrestrial environment, including human health. However, existing models employing an advection-dispersion equation are insufficient to incorporate the holistic mechanism of MP migration. Therefore, to bridge the gap associated with MP migration in soil-groundwater systems, a dispersion-drag force coupled model incorporating a drag force on MPs along with dispersion is developed and validated through existing laboratory and field-scale experiments. The inclusion of the MP dispersion notably increased the global maximum particle velocity (vmaxp) of MPs, resulting in a higher concentration of MPs in the aquifer, which is also established by sensitivity analysis of MP dispersion. Additionally, increasing irrigation flux and irrigation areas significantly accelerates MP migration downward from soil to deep saturated aquifers. Intriguingly, vmaxp of MPs exhibited a nonlinear relationship with MPs' sizes smaller than 20 µm reaching the highest value (=1.64 × 10-5 m/s) at a particle size of 8 µm, while a decreasing trend was identified for particle sizes ranging from 20 to 100 µm because of the hindered effect by porous media and the weaker effect of the drag force. Moreover, distinct behaviors were observed among different plastic types, with poly(vinyl chloride), characterized by the highest density, displaying the lowest vmaxp and minimal flux entering groundwater. Furthermore, the presence of a heterogeneous structure with lower hydraulic conductivity facilitated MP dispersion and promoted their migration in saturated aquifers. The findings shed light on effective strategies to mitigate the impact of MPs in aquifers, contributing valuable insights to the broader scientific fraternity.
RESUMO
Microplastics (MPs), plastic particles smaller than 5 mm, are now a growing environmental and public health issue, as they are detected pervasively in freshwater and marine environments, ingested by organisms, and then enter the human body. Industrial development drives this environmental burden caused by MP formation and human uptake by elevating plastic pollution levels and shaping the domestic dietary structure. We map the MP human uptake across 109 global countries on five continents from 1990 to 2018, focusing on the world's major coastlines that are affected by plastic pollution that affects the United Nations' Sustainable Development Goals (SDGs): SDG 6 (Clean Water and Sanitation), SDG 14 (Life Below Water), and SDG 15 (Life on Land). Amid rapid industrial growth, Indonesia tops the global per capita MP dietary intake at 15 g monthly. In Asian, African, and American countries, including China and the United States, airborne and dietary MP uptake increased over 6-fold from 1990 to 2018. Eradicating 90% of global aquatic plastic debris can help decrease MP uptake by more than 48% in Southeast Asian countries that peak MP uptake. To reduce MP uptake and potential public health risks, governments in developing and industrialized countries in Asia, Europe, Africa, and North and South America should incentivize the removal of free plastic debris from freshwater and saltwater environments through advanced water treatment and effective solid waste management practices.
Assuntos
Microplásticos , Plásticos , Humanos , Países em Desenvolvimento , Desenvolvimento IndustrialRESUMO
Microplastic pollution, an emerging pollution issue, has become a significant environmental concern globally due to its ubiquitous, persistent, complex, toxic, and ever-increasing nature. As a multifaceted and diverse suite of small plastic particles with different physicochemical properties and associated matters such as absorbed chemicals and microbes, future research on microplastics will need to comprehensively consider their multidimensional attributes. Here, we introduce a novel, conceptual framework of the "microplastome", defined as the entirety of various plastic particles (<5 mm), and their associated matters such as chemicals and microbes, found within a sample and its overall environmental and toxicological impacts. As a novel concept, this paper aims to emphasize and call for a collective quantification and characterization of microplastics and for a more holistic understanding regarding the differences, connections, and effects of microplastics in different biotic and abiotic ecosystem compartments. Deriving from this lens, we present our insights and prospective trajectories for characterization, risk assessment, and source apportionment of microplastics. We hope this new paradigm can guide and propel microplastic research toward a more holistic era and contribute to an informed strategy for combating this globally important environmental pollution issue.
Assuntos
Microplásticos , Poluentes Químicos da Água , Plásticos/toxicidade , Ecossistema , Estudos Prospectivos , Monitoramento Ambiental , Poluentes Químicos da Água/toxicidadeRESUMO
The absence of standardized procedures to assess microfiber pollution released during laundering, alongside textile complexities, has caused incomparability and inconsistency between published methodologies, data formats, and presentation of findings. Yet, this information needs to be clear and succinct to engage producers and consumers in reducing microfiber pollution through solutions, such as eco-design. This review analyses source directed interventions through design and manufacturing parameters that can prevent or reduce microfiber shedding from knit fabrics during washing. Contradicting results are critically evaluated and future research agendas, alongside potential areas for voluntary and involuntary sustainable incentives are summarized. To do this, a systematic review was carried out, using the PRISMA approach to verify which fabrics had been investigated in terms of microfiber shedding. Using selected keywords, a total number of 32 articles were included in this review after applying carefully developed inclusion and exclusion criteria. The influence of fabric parameters such as fiber polymer, length of fibers and yarn twist alongside fabric construction parameters such as gauge of knit and knit structure are critically evaluated within the systematically selected studies. This review highlights the agreed upon fabric parameters and constructions that can be implemented to reduce microfiber pollution released from knit textiles. The complexities and inconsistencies within the findings are streamlined to highlight the necessary future research agendas. This information is critical to facilitate the adoption of cross-industry collaboration to achieve pollution reduction strategies and policies. We call for more systematic studies to assess the relationship between individual textile parameters and their influence on microfiber shedding. Additionally, studies should work toward standardization to increase comparability between studies and created more comprehensive guidelines for policy development and voluntary actions for the textile and apparel industry to participate in addressing more sustainable practises through eco-design.
Assuntos
Lavanderia , Plásticos , Têxteis , Poliésteres/química , Poluição AmbientalRESUMO
Often large quantities of plastics are found in compost, with price look-up stickers being a major but little-explored component in the contamination path. Stickers glued to fruit or vegetable peels usually remain attached to the organic material despite sorting processes in the composting plant. Here, we investigated the effects of industrial composting on the structural alterations of these stickers. Commercial polypropylene (PP) stickers on banana peels were added to a typical organic material mixture for processing in an industrial composting plant and successfully resampled after a prerotting (11 days) and main rotting step (25 days). Afterward, both composted and original stickers were analyzed for surface and structural changes via scanning electron microscopy, Fourier-transform infrared spectroscopy, and micro- and nano-X-ray computed tomography (CT) combined with deep learning approaches. The composting resulted in substantial surface changes and degradation in the form of microbial colonization, deformation, and occurrence of cracks in all stickers. Their pore volumes increased from 16.7% in the original sticker to 26.3% at the end of the compost process. In a similar way, the carbonyl index of the stickers increased. Micro-CT images additionally revealed structural changes in the form of large adhesions that penetrated the surface of the sticker. These changes were accompanied by delamination after 25 days of composting, thus overall hinting at the degradation of the stickers and the subsequent formation of smaller microplastic pieces.
Assuntos
Compostagem , Frutas , Plásticos , Tomografia Computadorizada por Raios X , Solo/química , Microscopia Eletrônica de Varredura , Polipropilenos/químicaRESUMO
Since the transfer of microplastic across the sea-air interface was first reported in 2020, numerous studies have been conducted on its emission flux estimation. However, these studies have shown significant discrepancies in the estimated contribution of oceanic sources to global atmospheric microplastics, with evaluations ranging from predominant to negligible, varying by 4 orders of magnitude from 7.7 × 10-4 to 8.6 megatons per year, thereby creating considerable confusion in the research on the microplastic cycle. Here, we provide a perspective by applying the well-established theory of particulate transfer through the sea-air interface. The upper limit of global sea-air emission flux microplastics was calculated, aiming to constrain the controversy in the previously reported fluxes. Specifically, the flux of sub-100 µm microplastic cannot exceed 0.01 megatons per year, and for sub-0.1 µm nanoplastics, it would not exceed 3 × 10-7 megatons per year. Bridging this knowledge gap is crucial for a comprehensive understanding of the sea-air limb in the "plastic cycle", and facilitates the management of future microplastic pollution.
Assuntos
Atmosfera , Monitoramento Ambiental , Microplásticos , Oceanos e Mares , Microplásticos/análise , Atmosfera/química , Poluentes Atmosféricos/análiseRESUMO
Dissolved organic matter (DOM) exists widely in natural water, which inevitably influences microplastic (MP) photoaging. Nevertheless, the impacts of DOM fractions with diverse molecular structures on MP photoaging remain to be elucidated. This study explored the photoaging mechanisms of polylactic acid (PLA)-MPs and polystyrene (PS)-MPs in the presence of DOM and its subfractions (hydrophobic acid (HPOA), hydrophobic neutral (HPON), and hydrophilic (HPI)). Across DOM fractions, HPI exhibited the highest electron accepting capacity (23 µmol e- (mg C)-1) due to its abundant tannin-like species (36.8%) with carboxylic groups, which facilitated more reactive oxygen species generation (particularly hydroxyl radical), leading to the strongest photoaging rate of two MPs by HPI. However, the sequences of bond cleavage during photoaging of each MPs were not clearly shifted as revealed by two-dimensional infrared correlation spectra. Inconspicuous effects on the extent of PS- and PLA-MPs photoaging were observed for HPOA and HPON, respectively. This was mainly ascribed to the occurrence of inhibitory mechanisms (e.g., light-shielding and quenching effect) counteracting the reactive oxygen species-promoting effects. The findings identified the HPI fraction of DOM for promoting PS- and PLA-MPs photoaging rate and first constructed a link among DOM molecular structures, redox properties, and effects on MP photoaging.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Microplásticos , Oxirredução , Espécies Reativas de Oxigênio , Espécies Reativas de Oxigênio/metabolismo , Poliestirenos/química , Poliésteres/química , Poluentes Químicos da Água/químicaRESUMO
Microplastic records from lake cores can reconstruct the plastic pollution history. However, the associations between anthropogenic activities and microplastic accumulation are not well understood. Huguangyan Maar Lake (HML) is a deep-enclosed lake without inlets and outlets, where the sedimentary environment is ideal for preserving a stable and historical microplastic record. Microplastic (size: 10-500 µm) characteristics in the HML core were identified using the Laser Direct Infrared Imaging system. The earliest detectable microplastics appeared unit in 1955 (1.1 items g-1). The microplastic abundance ranged from n.d. to 615.2 items g-1 in 1955-2019 with an average of 134.9 items g-1. The abundance declined slightly during the 1970s and then increased rapidly after China's Reform and Opening Up in 1978. Sixteen polymer types were detectable, with polyethylene and polypropylene dominating, accounting for 23.5 and 23.3% of the total abundance, and the size at 10-100 µm accounted for 80%. Socioeconomic factors dominated the microplastic accumulation based on the random forest modeling, and the contributions of GDP per capita, plastic-related industry yield, and total crop yield were, respectively, 13.9, 35.1, and 9.3% between 1955-2019. The total crop yield contribution further increased by 1.7% after 1978. Coarse sediment particles increased with soil erosion exacerbated microplastics discharging into the sediment.
Assuntos
Monitoramento Ambiental , Lagos , Microplásticos , China , Microplásticos/análise , Poluentes Químicos da Água/análise , Plásticos , Sedimentos Geológicos/químicaRESUMO
The abrasion of synthetic textile fibers is a significant factor in the generation of environmental microplastic fibers (MPFs). The extent to which polymer sponges designed specifically for surface cleaning have a tendency to release MPFs during normal use remains unknown. Here, the tribological behaviors of melamine cleaning sponges (also known as "magic erasers") with different strut densities against metal surfaces of different roughness were investigated using a reciprocating abrader. The MPFs formed by sponge wear under various conditions were characterized in terms of their morphology, composition, and quantity. They were mainly composed of poly(melamine-formaldehyde) polymer with linear or branched fiber morphologies (10-405 µm in length), which were formed through deformation and fracture of the struts within open cells of the sponges, facilitated by friction-induced polymer decomposition. The rate and capability of MPF production generally increased with increasing roughness of the metal surface and density of the struts, respectively. The sponge wear could release 6.5 million MPFs/g, which could suggest a global overall emission of 4.9 trillion MPFs due to sponge consumption. Our study reveals a hitherto unrecognized source of the environmental MPF contamination and highlights the need to evaluate exposure risks associated with these new forms of MPFs.
Assuntos
Microplásticos , Polímeros/química , TêxteisRESUMO
Microplastic-derived dissolved organic matter (MP-DOM) is an emerging carbon source in the environment. Interactions between MP-DOM and iron minerals alter the transformation of ferrihydrite (Fh) as well as the distribution and fate of MP-DOM. However, these interactions and their effects on both two components are not fully elucidated. In this study, we selected three types of MP-DOM as model substances and utilized Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and extended X-ray absorption fine structure (EXAFS) spectroscopy to characterize the structural features of DOMs and DOM-mineral complexes at the molecular and atomic levels. Our results suggest that carboxyl and hydroxyl groups in MP-DOM increased the Fe-O bond length by 0.02-0.03 Å through interacting with Fe atoms in the first shell, thereby inhibiting the transformation of Fh to hematite (Hm). The most significant inhibition of Fh transformation was found in PS-DOM, followed by PBAT-DOM and PE-DOM. MP-DOM components, such as phenolic compounds and condensed polycyclic aromatics (MW > 360 Da) with high oxygen content and high unsaturation, exhibited stronger mineral adsorption affinity. These findings provide a profound theoretical basis for accurately predicting the behavior and fate of iron minerals as well as MP-DOM in complex natural environments.
RESUMO
The pollution of the marine environment with plastic debris is expected to increase, where ocean currents and winds cause their accumulation in convergence zones like the North Pacific Subtropical Gyre (NPSG). Surface-floating plastic (>330 µm) was collected in the North Pacific Ocean between Vancouver (Canada) and Singapore using a neuston catamaran and identified by Fourier-transform infrared spectroscopy (FT-IR). Baseline concentrations of 41,600-102,700 items km-2 were found, dominated by polyethylene and polypropylene. Higher concentrations (factors 4-10) of plastic items occurred not only in the NPSG (452,800 items km-2) but also in a second area, the PapahaÌ naumokuaÌ kea Marine National Monument (PMNM, 285,200 items km-2). This second maximum was neither reported previously nor predicted by the applied ocean current model. Visual observations of floating debris (>5 cm; 8-2565 items km-2 and 34-4941 items km-2 including smaller "white bits") yielded similar patterns of baseline pollution (34-3265 items km-2) and elevated concentrations of plastic debris in the NPSG (67-4941 items km-2) and the PMNM (295-3748 items km-2). These findings suggest that ocean currents are not the only factor provoking plastic debris accumulation in the ocean. Visual observations may be useful to increase our knowledge of large-scale (micro)plastic pollution in the global oceans.
Assuntos
Monitoramento Ambiental , Plásticos , Monitoramento Ambiental/métodos , Oceanos e Mares , Oceano Pacífico , Espectroscopia de Infravermelho com Transformada de Fourier , Resíduos/análise , CanadáRESUMO
The Kuroshio Extension recirculation gyre in the western North Pacific is an accumulation site of plastic litter transported by the Kuroshio Current. A sediment trap was moored at a depth of 4900 m at Station KEO within the Kuroshio Extension recirculation gyre, and the vertical flux of microplastics in sinking particles of size <1 mm was observed. Forty-one sediment-trap samples collected from July 1, 2014, to October 2, 2016, were analyzed with a micro-Fourier transform infrared spectrometer and microplastics were detected in all samples. Seventeen polymer types were identified, and 90% of the microplastics were less than 100 µm in size. Microplastic sinking was driven by the action of the biological pump, which was in turn driven by seasonal variations in solar radiation and increased surface primary production typical of the spring season. Microplastic mass flux varied from 4.5 × 10-3 to 0.38 mg m-2 day-1 during the sampling period, with a mean and standard deviation of 0.054 ± 0.075 mg m-2 day-1. Extrapolating the annual microplastic mass flux at Station KEO to the entire Kuroshio Extension recirculation gyre, it is estimated that 0.028 million metric tons of microplastics are transported annually to 4900 m depth in this area.
RESUMO
Environmental pollution by plastics is a global issue of increasing concern. However, microplastic analysis in complex environmental matrices, such as soil samples, remains an analytical challenge. Destructive mass-based methods for microplastic analysis do not determine plastics' shape and size, which are essential parameters for reliable ecological risk assessment. By contrast, nondestructive particle-based methods produce such data but require elaborate, time-consuming sample preparation. Thus, time-efficient and reliable methods for microplastic analysis are needed. The present study explored the potential of frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) for rapidly and reliably identifying as well as differentiating plastics and natural materials from terrestrial environments. We investigated the fluorescence spectra of ten natural materials from terrestrial environments, tire wear particles, and eleven different transparent plastic granulates <5 mm to determine the optimal excitation wavelength for identification and differentiation via FD-FLIM under laboratory conditions. Our comparison of different excitation wavelengths showed that 445 nm excitation exhibited the highest fluorescence intensities. 445 nm excitation was also superior for identifying plastic types and distinguishing them from natural materials from terrestrial environments with a high probability using FD-FLIM. We could demonstrate that FD-FLIM analysis has the potential to contribute to a streamlined and time-efficient direct analysis of microplastic contamination. However, further investigations on size-, shape-, color-, and material-type detection limitations are necessary to evaluate if the direct identification of terrestrial environmental samples of relatively low complexity, such as a surface inspection soil, is possible.