Murexide-derived in vitro electrochemical sensor for the simultaneous determination of neurochemicals.

This work highlights the protocol employed for the simultaneous electroanalysis of tryptamine, serotonin and dopamine using a conducting poly-murexide-based electrode. To date, this is the first-of-its-kind report of simultaneous electrochemical determination of these three targets. Features of the developed electrode were identified by employing FE-SEM analysis. Under optimized conditions, the analytes underwent an irreversible electro-oxidation at the modified electrode surface, with a linear range of 0.5-40 µΜ, 0.4-40.4 µΜ and 0.5-40 µΜ for dopamine, serotonin and tryptamine, respectively. The electrolytic medium employed for the sensing was a phosphate-buffered solution with pH 7. The specificity of the developed electrode was also satisfactory in the presence of other biomolecules including L-phenylalanine, L-serine, glucose and ascorbic acid. Thus, the developed murexide-derived conducting-polymer-based electrode was used for the simultaneous sensing of the neurochemicals dopamine, serotonin and tryptamine. Electroanalysis was also demonstrated for these targets in human serum.

Electrochemical study of a glassy carbon electrode modified by poly-4-nitroaniline-reduced/murexide and its sensitivity for metal ions.

The electrochemical modification of a glassy carbon electrode using reduced poly-4 nitroaniline (P-4NA) and it's applicability for determination of metallic ions was performed in this study. The electrode modification was performed by cyclic voltammetry in the potential range between 0.9 V and 1.4 V vs Ag/Ag+ (in 10 mM AgNO3) at the scan rate of 100 mV/s by 50 cycles in non-aqueous media. The reduction of nitro groups on the P-4NA modified glassy carbon electrode surface was performed in the potential range between -0.1 V and -0.8 V vs Ag/AgCl(Sat. KCl) at a scan rate of 100 mV/s in 100 mM aqueous HCl solution. The reduced P-4NA glassy carbon surface was modified with the murexide. The affinity of the modified glassy carbon electrode with some metallic ions was investigated by electrochemical impedance spectroscopy method in phosphate buffer solution (pH = 5).

Direct Detection of SARS-CoV-2 RNA in Saliva with Colorimetric RT-LAMP.

RT-LAMP is an effective alternative to RT-PCR-based diagnostics, offering high specificity, sensitivity, and rapid results. One notable advantage is the robustness of its enzymes, allowing for direct amplification from crude samples without the need for prior isolation of RNA. Colorimetric LAMP is particularly attractive as it eliminates the need for complex instrumentation, making it suitable for point-of-care applications. Here, we present a comprehensive step-by-step protocol for establishing an RT-LAMP-based test for direct detection of SARS-CoV-2 genomic RNA in saliva samples using different colorimetric detection methods. Importantly, this versatile test can be easily adapted to detect emerging pathogens.

Magnetite nanoparticles grafted with murexide-terminated polyamidoamine dendrimers for removal of lead (II) from aqueous solution: synthesis, characterization, adsorption and antimicrobial activity studies.

In this study, new, efficient, eco-friendly and magnetically separable nanoadsorbents, MNPs-G1-Mu and MNPs-G2-Mu, were successfully prepared by covalently grafting murexide-terminated polyamidoamine dendrimers on 3-aminopropyl functionalized silica-coated magnetite nanoparticles, and used for rapid removal of lead (II) from aqueous medium. After each adsorption process, the supernatant was successfully acquired from reaction mixture by the magnetic separation, and then analyzed by employing ICP-OES. Chemical and physical characterizations of new nanomaterials were confirmed by XRD, FT-IR, SEM, TEM, and VSM. Maximum adsorption capacities (qm) of both prepared new nanostructured adsorbents were compared with each other and also with some other adsorbents. The kinetic data were appraised by using pseudo-first-order and pseudo-second-order kinetic models. Adsorption isotherms were found to be suitable with both Langmuir and Freundlich isotherm linear equations. The maximum adsorption capacities for MNPs-G1-Mu and MNPs-G2-Mu were calculated as 208.33 mg g-1 and 232.56 mg g-1, respectively. Antimicrobial activities of nanoparticles were also examined against various microorganisms by using microdilution method. It was determined that MNPs-G1-Mu, MNPs-G2-Mu and lead (II) adsorbed MNPs-G2-Mu showed good antimicrobial activity against S. aureus ATTC 29213 and C. Parapsilosis ATTC 22019. MNPs-G1-Mu also showed antimicrobial activity against C. albicans ATTC 10231.

Flower-like platinum-cobalt-ruthenium alloy nanoassemblies as robust and highly efficient electrocatalyst for hydrogen evolution reaction.

Exploring hydrogen evolution reaction (HER) catalyst with highly catalytic features in alkaline conditions is considered as significance for water splitting. In this study, a general and simple method was developed to prepare flower-like platinum-cobalt-ruthenium alloy nanoassemblies (PtCoRu NAs) by using murexide and cetyltrimethylammonium chloride (CTAC) as the co-structure-directing agents. Benefiting from the structural advantages and multimetallic compositions, the as-prepared PtCoRu NAs displayed remarkably enhanced electrocatalytic performance for the HER in 1.0 M KOH, with a low overpotential (η, 22 mV) to drive 10 mA cm-2, small Tafel slope (46 mV dec-1), and high exchange current density (j0, 3.30 mA cm-2) during the long-term electrolysis. The as-developed strategy sheds some valuable guidelines for preparing advanced multimetallic catalysts for production of hydrogen in fuel cells.

Novel hydrophilic carboxymethyl starch/montmorillonite nanocomposite films.

Preparation of novel carboxymethyl starch (CMS)-based biodegradable films with calcium montmorillonite has been described. The biocomposites were obtained by casting method, glycerol and citric acid were used as plasticizer and crosslinking agent, respectively. The effect of calcium montmorillonite (MMT-Ca) on hydrophilicity (moisture absorption, solubility in water as well as contact angle measurements) was evaluated. Moreover, thermomechanical and mechanical properties of nanocomposites were determined. For all the systems tested intercalated structure of MMT-Ca was revealed, however the most efficient clay platelets dispersion was noted for film containing 5 wt.% MMT-Ca. Such biodegradable CMS/MMT-Ca films exhibiting relatively good mechanical properties could find application in controlled delivery systems as well as in agriculture for seed tapes production where hydrophilicity of polymer carrier is strongly advantageous.