Enhanced N2 Adsorption and Activation by Combining Re Clusters and In Vacancies as Dual Sites for Efficient and Selective Electrochemical NH3 Synthesis.

The electrochemical N2 reduction reaction (NRR) is a green and energy-saving sustainable technology for NH3 production. However, high activity and high selectivity can hardly be achieved in the same catalyst, which severely restricts the development of the electrochemical NRR. In2Se3 with partially occupied p-orbitals can suppress the H2 evolution reaction (HER), which shows excellent selectivity in the electrochemical NRR. The presence of VIn can simultaneously provide active sites and confine Re clusters through strong charge transfer. Additionally, well-isolated Re clusters stabilized on In2Se3 by the confinement effect of VIn result in Re-VIn active sites with maximum availability. By combining Re clusters and VIn as dual sites for spontaneous N2 adsorption and activation, the electrochemical NRR performance is enhanced significantly. As a result, the Re-In2Se3-VIn/CC catalyst delivers a high NH3 yield rate (26.63 µg h-1 cm-2) and high FEs (30.8%) at -0.5 V vs RHE.

Boosting Electrochemical Nitrogen Fixation via Regulating Surface Electronic Structure by CeO2 Hybridization.

Electrocatalytic nitrogen reduction reaction (NRR) paves a sustainable way to produce NH3 but suffering from the relatively low NH3 yield and poor selectivity. High-performance NRR catalysts and a deep insight into the structure-performance relationship are higher desired. Herein, a molten-salt approach is developed to synthesize tiny CeO2 nanoparticles anchored by ultra-thin MoN nanosheets as advanced catalysts for NRR. Specifically, a considerably high NH3 yield rate of 27.5 µg h-1 mg-1 with 17.2% Faradaic efficiency (FE) can be achieved at -0.3 V vs (RHE) under ambient conditions. Experimental and density functional theory (DFT) calculations further point out that the incorporation of MoN with CeO2 can promotes the enlargement of the electron deficient area of nitrogen vacancy site. The enlarged electron deficient area contributes to the accommodation of lone pair electrons of N2, which dramatically improves the N2 adsorption/activation and the key intermediates (*NNH and *NH3) generation, thus boosting the NRR performance.

Catalysts with Trimetallic Sites on Graphene-like C2N for Electrocatalytic Nitrogen Reduction Reaction: A Theoretical Investigation.

Electrocatalytic nitrogen reduction reaction (NRR) is a green and highly efficient way to replace the industrial Haber-Bosch process. Herein, clusters consisting of three transition metal atoms loaded on C2N as NRR electrocatalysts are investigated using density functional theory (DFT). Meanwhile, Ca was introduced as a promoter and the role of Ca in NRR was investigated. It was found that Ca anchored to the catalyst can act as an electron donor and effectively promote the activation of N2 on M3. In both M3@C2N and M3Ca@C2N (M=Fe, Co, Ni), the limiting potential (UL) is less negative than that of the Ru(0001) surface and has the ability to suppress the competitive hydrogen evolution reaction (HER). Among them, Fe3@C2N is suggested to be the most promising candidate for NRR with high thermal stability, strong N2 adsorption ability, low limiting potential, and good NRR selectivity. The concepts of trimetallic sites and alkaline earth metal promoters in this work provide theoretical guidance for the rational design of atomically active sites in electrocatalytic NRR.

Emerging trends in research and development on earth abundant materials for ammonia degradation coupled with H2 generation.

Ammonia, as an essential and economical fuel, is a key intermediate for the production of innumerable nitrogen-based compounds. Such compounds have found vast applications in the agricultural world, biological world (amino acids, proteins, and DNA), and various other chemical transformations. However, unlike other compounds, the decomposition of ammonia is widely recognized as an important step towards a safe and sustainable environment. Ammonia has been popularly recommended as a viable candidate for chemical storage because of its high hydrogen content. Although ruthenium (Ru) is considered an excellent catalyst for ammonia oxidation; however, its high cost and low abundance demand the utilization of cheaper, robust, and earth abundant catalyst. The present review article underlines the various ammonia decomposition methods with emphasis on the use of non-noble metals, such as iron, nickel, cobalt, molybdenum, and several other carbides as well as nitride species. In this review, we have highlighted various advances in ammonia decomposition catalysts. The major challenges that persist in designing such catalysts and the future developments in the production of efficient materials for ammonia decomposition are also discussed.

In this dynamic area, ammonia degradation to hydrogen fuel provides a valuable contribution in the carbon neutral economy. Ammonia has been used extensively in several industries and is considered an ideal candidate for hydrogen generation and storage due to its high hydrogen content. Consequently, the ammonia decomposition to yield green hydrogen has become a hot topic in research. Although numerous studies on ammonia decomposition have been conducted over the last few decades, still very few review articles on the most recent advances in this field of catalysis have been published. Through this review, systematic information on the types of decomposition catalysts including both noble (Ru) and non-noble earth abundant metals such as iron, nickel, cobalt, molybdenum, their carbides and nitrides, catalytic routes, as well as the reactivity and mechanism can be comprehended. The literature on newly discovered catalysts, specifically from the last five years, is well documented and explained in this review article. Furthermore, the effect of catalyst supports, their reaction kinetics and mechanistic insights have also been discussed. The challenges and opportunities associated with the decomposition catalysts are comprehensively explicated in the end.

Ammonia decomposition reaction (ADR) is a viable method for hydrogen storage in the form of chemical bonds.Catalysts composed of noble, non-noble metals, amides, imides, carbides, nitrides, and their combinations have been widely explored towards the ADR.Challenges and opportunities in the ammonia oxidation are pointed out.

Creating Highly Active Iron Sites in Electrochemical N2 Reduction by Fabricating Strongly-Coupled Interfaces.

Electrochemical Nc reduction has been regarded as one of the most promising approaches to producing ammonia under mild conditions, but there are remaining pressing challenges in improving the reaction rate and efficiency. Herein, an unconventional galvanic replacement reaction is reported to fabricate a unique hierarchical structure composed of Fe3 O4 -CeO2 bimetallic nanotubes covered by Fe2 O3 ultrathin nanosheets. Control experiments reveal that CeO2 species play the essential role of stabilizer for Fe2+ cations. Compared with bare CeO2 and Fe2 O3 nanotubes, the as-obtained Fe2 O3 /Fe3 O4 -CeO2 possesses a remarkably enhanced NH3 yield rate (30.9 µg h-1 mgcat -1 ) and Faradaic efficiency (26.3%). The enhancement can be attributed to the hierarchical feature that makes electrodes more easily to contact with electrolytes. More importantly, as verified by density functional theory calculations, the generation of Fe2 O3 -Fe3 O4 heterogeneous junctions can efficiently optimize the reaction pathways, and the energy barrier of the potential determining step (the *N2 hydrogenates into *N*NH) is significantly decreased.

Inept N2 Activation of Tri-Nuclear Nickel Complex with Labile Sulfur Ligands Facilitates Selective N2 H4 Formation in Electrocatalytic Conversion of N2.

Conversion of N2 to the energy vector N2 H4 under benign conditions is highly desirable. However, such N2 fixation processes are extremely rare. It has been recently reported that N2 to N2 H4 conversion can be achieved electrochemically by using a trinuclear [Ni3 (S2 C3 H6 )4 ]2- complex (named as [Ni3 S8 ]2- ). There are hardly any precedents of Nitrogen Reduction Reaction (NRR) by molecular catalysts having Ni and the highly unusual selectivity for N2 H4 over NH3 makes this electrochemical reduction unique. A systematic theoretical study employing calibrated Density Functional Theory to unearth the mechanisms of NRR (4e- /4H+ ) and Hydrogen Evolution Reaction (2e- /2H+ ) was conducted for the aforementioned trinuclear Ni complex. Our findings unravel a curious case of ligand lability working in tandem with metal centers in facilitating this unprecedented electrocatalytic activity. Furthermore, it is shown that the poor N-N bond activation property of Ni is responsible for this unusual selectivity. Additionally, the Hydrogen Evolution Reaction (HER) mechanistic pathways have also been delineated in this report. The mechanistic intricacies thus unearthed in this study may assist in developing more efficient electrocatalysts for N2 H4 production through NRR.

Heteronuclear Trimetallic MFe2 and M2 Fe (M=V, Nb, and Ta) Clusters for Dinitrogen Activation.

Catalysts with heteronuclear metal active sites may have high performance in the nitrogen reduction reaction (NRR), and the in-depth understanding of the reaction mechanisms is crucial for the design of related catalysts. In this work, the dissociative adsorption of N2 on heteronuclear trimetallic MFe2 and M2 Fe (M=V, Nb, and Ta) clusters was studied with density functional theory calculations. For each cluster, two reaction paths were studied with N2 initially on M and Fe atoms, respectively. Mayer bond order analysis provides more information on the activation of N-N bonds. M2 Fe is generally more reactive than MFe2 . The coordination mode of N2 on three metal atoms can be end-on: end-on: side-on (EES) for both MFe2 and M2 Fe. In addition, a unique end-on: side-on: side-on (ESS) coordination mode was found for M2 Fe, which leads to a higher degree of N-N bond activation. Nb2 Fe has the highest reactivity towards N2 when both the transfer of N2 and the dissociation of N-N bonds are taken into account, while Ta-containing clusters have a superior ability to activate the N-N bond. These results indicate that it is possible to improve the performance of iron-based catalysts by doping with vanadium group metals.

The contribution of survival to changes in the net reproduction rate.

The net reproduction rate (NRR) is an alternative fertility measure to the more common total fertility rate (TFR) and accounts for the mortality context of the population studied. This study is the first to compare NRR trends in high- and low-income countries and to decompose NRR changes over time into fertility and survival components. The results show that changes in the NRR have been driven mostly by changes in fertility. Yet improvements in survival have also played an important role in explaining changes in the NRR over the last century and represent a substantial component of change in some low-income countries today. Furthermore, the decomposition of the survival component by age indicates that the survival effect on population reproduction is concentrated mostly in infancy, although the HIV/AIDS epidemic altered this age profile in some populations. The findings highlight the importance of mortality's effect on reproduction in specific periods and contexts.

Redox-Mediated Ambient Electrolytic Nitrogen Reduction for Hydrazine and Ammonia Generation.

This work presents a redox-mediated electrolytic nitrogen reduction reaction (RM-eNRR) using polyoxometalate (POM) as the electron and proton carrier which frees the TiO2 -based catalyst from the electrode and shifts the reduction of nitrogen to a reactor tank. The RM-eNRR process has achieved an ammonium production yield of 25.1 µg h-1 or 5.0 µg h-1 cm-2 at an ammonium concentration of 6.7 ppm. With high catalyst loading, 61.0 ppm ammonium was accumulated in the electrolyte upon continuous operation, which is the highest concentration detected for ambient eNRR so far. The mechanism underlying the RM-eNRR was scrutinized both experimentally and computationally to delineate the POM-mediated charge transfer and hydrogenation process of nitrogen molecule on the catalyst. RM-eNRR is expected to provide an implementable solution to overcome the limitations in the conventional eNRR process.

Exploration and Investigation of Periodic Elements for Electrocatalytic Nitrogen Reduction.

High demand for green ecosystems has urged the human community to reconsider and revamp the traditional way of synthesis of several compounds. Ammonia (NH3 ) is one such compound whose applications have been extended from fertilizers to explosives and is still being synthesized using the high energy inhaling Haber-Bosch process. Carbon free electrocatalytic nitrogen reduction reaction (NRR) is considered as a potential replacement for the Haber-Bosch method. However, it has few limitations such as low N2 adsorption, selectivity (competitive HER reactions), low yield rate etc. Since it is at the early stage, tremendous efforts have been devoted in understanding the reaction mechanism and screening of the electrocatalysts and electrolytes. In this review, the electrocatalysts are classified based on the periodic table with heat maps of Faraday efficiency and yield rate of NH3 in NRR and their electrocatalytic properties toward NRR are discussed. Also, the activity of each element is discussed and short tables and concise graphs are provided to enable the researchers to understand recent progress on each element. At the end, a perspective is provided on countering the current challenges in NRR. This review may act as handbook for basic NRR understandings, recent progress in NRR, and the design and development of advanced electrocatalysts and systems.

Formation of BNC Coordination to Stabilize the Exposed Active Nitrogen Atoms in g-C3 N4 for Dramatically Enhanced Photocatalytic Ammonia Synthesis Performance.

It is an important issue that exposed active nitrogen atoms (e.g., edge or amino N atoms) in graphitic carbon nitride (g-C3 N4 ) could participate in ammonia (NH3 ) synthesis during the photocatalytic nitrogen reduction reaction (NRR). Herein, the experimental results in this work demonstrate that the exposed active N atoms in g-C3 N4 nanosheets can indeed be hydrogenated and contribute to NH3 synthesis during the visible-light photocatalytic NRR. However, these exposed N atoms can be firmly stabilized through forming BNC coordination by means of B-doping in g-C3 N4 nanosheets (BCN) with a B-doping content of 13.8 wt%. Moreover, the formed BNC coordination in g-C3 N4 not only effectively enhances the visible-light harvesting and suppresses the recombination of photogenerated carriers in g-C3 N4 , but also acts as the catalytic active site for N2 adsorption, activation, and hydrogenation. Consequently, the as-synthesized BCN exhibits high visible-light-driven photocatalytic NRR activity, affording an NH3 yield rate of 313.9 µmol g-1 h-1 , nearly 10 times of that for pristine g-C3 N4 . This work would be helpful for designing and developing high-efficiency metal-free NRR catalysts for visible-light-driven photocatalytic NH3 synthesis.

Comparing Molecular Mechanisms in Solar NH3 Production and Relations with CO2 Reduction.

Molecular mechanisms for N2 fixation (solar NH3) and CO2 conversion to C2+ products in enzymatic conversion (nitrogenase), electrocatalysis, metal complexes and plasma catalysis are analyzed and compared. It is evidenced that differently from what is present in thermal and plasma catalysis, the electrocatalytic path requires not only the direct coordination and hydrogenation of undissociated N2 molecules, but it is necessary to realize features present in the nitrogenase mechanism. There is the need for (i) a multi-electron and -proton simultaneous transfer, not as sequential steps, (ii) forming bridging metal hydride species, (iii) generating intermediates stabilized by bridging multiple metal atoms and (iv) the capability of the same sites to be effective both in N2 fixation and in COx reduction to C2+ products. Only iron oxide/hydroxide stabilized at defective sites of nanocarbons was found to have these features. This comparison of the molecular mechanisms in solar NH3 production and CO2 reduction is proposed to be a source of inspiration to develop the next generation electrocatalysts to address the challenging transition to future sustainable energy and chemistry beyond fossil fuels.

Efficient Electrocatalytic Ammonia Synthesis via Theoretical Screening of Titanate Nanosheet-Supported Single-Atom Catalysts.

The electrocatalytic nitrogen reduction reaction (NRR) for synthesizing ammonia holds promise as an alternative to the traditional high-energy-consuming Haber-Bosch method. Rational and accurate catalyst design is needed to overcome the challenge of activating N2 and to suppress the competitive hydrogen evolution reaction (HER). Single-atom catalysts have garnered widespread attention due to their 100% atom utilization efficiency and unique catalytic performance. In this context, we constructed theoretical models of metal single-atom catalysts supported on titanate nanosheets (M-TiNS). Initially, density functional theory (DFT) was employed to screen 12 single-atom catalysts for NRR- and HER-related barriers, leading to the identification of the theoretically optimal NRR catalyst, Ru-TiNS. Subsequently, experimental synthesis of the Ru-TiNS single-atom catalyst was successfully achieved, exhibiting excellent performance in catalyzing NRR, with the highest NH3 yield rate reaching 15.19 µmol mgcat-1 h-1 and a Faradaic efficiency (FE) of 15.3%. The combination of experimental results and theoretical calculations demonstrated the efficient catalytic ability of Ru sites, validating the effectiveness of the constructed theoretical screening process and providing a theoretical foundation for the design of efficient NRR catalysts.

Enhanced Activity and Selectivity for Nitrogen Reduction Reaction in Electrides-Based Heterostructures: A DFT Computational Study.

Developing sustainable and efficient catalysts for ammonia synthesis from atmospheric molecular N2 under ambient conditions presents a significant 21st-century challenge. Two-dimensional heterostructures, particularly single-atom catalysts (SACs) supported on two-dimensional materials, have emerged as a promising avenue due to their remarkable catalytic activity and selectivity. Electrides, characterized by an abundance of free electrons and high surface activity, have attracted substantial attention in this context. Through density functional theory (DFT) calculations, this study proposes electride-graphene heterostructures (EGHS) as catalysts to effectively regulate charge distribution at the catalytic center, facilitating the optimization of catalytic performance. The EGHS model addresses challenges related to excessive adsorbate binding, mitigating electron transfer compared to electride monolayer adsorption. This novel approach utilizes heterogeneous heterostructures to finely tune the catalytic site, optimizing electron input for enhanced catalysis. Based on the optimized charge transfer for N2 activation, the Cr-doped EGHS (Cr@EGHS) exhibits a promising performance in the nitrogen reduction reaction, leading to, a relatively low limiting potential of -0.85 V and high selectivity. The hypothesis charge transfer depend on N2 activation is further supported by modulating the distance between component layers of heterostructure. These findings contribute to design principles for 2D heterostructure catalysts and offer a reference for experimental synthesis.

Surface Electronic Properties-Driven Electrocatalytic Nitrogen Reduction on Metal-Conjugated Porphyrin 2D-MOFs.

Two-dimensional (2D) metal organic framework (MOF) or metalloporphyrin nanosheets with a stable metal-N4 complex unit present the metal as a single-atom catalyst dispersed in the 2D porphyrin framework. First-principles calculations on the 3d-transition metals in M-TCPP are investigated in this study for their surface-dependent electronic properties including work function and d-band center. Crystal orbital Hamiltonian population (-pCOHP) analysis highlights a higher contribution of the bonding state in the M-N bond and antibonding state in the N-N bond to be essential for N-N bond activation. A linear relationship between ΔGmax and surface electronic properties, N-N bond strength, and Bader charge has been found to influence the rate-determining potential for nitrogen reduction reaction (NRR) in M-TCPP MOFs. 2D Ti-TCPP MOF, with a kinetic energy barrier of 1.43 eV in the final protonation step of enzymatic NRR, shows exclusive NRR selectivity over competing hydrogen reduction (HER) and nitrogenous compounds (NO and NO2). Thus, Ti-TCPP MOF with an NRR limiting potential of -0.35 V in water solvent is proposed as an attractive candidate for electrocatalytic NRR.

Feasibility and interest of the anammox process as treatment alternative for anaerobic digester supernatants in manure processing--an overview.

Completely autotrophic nitrogen removal (ANR) is based on the combination of partial nitritation (PN) and anaerobic ammonium oxidation (anammox). It is a promising alternative for the subsequent treatment of biogas digester supernatants in livestock manure processing and nitrogen surplus scenarios. However, as no full-scale experiences in the treatment of manure digestates by ANR have been published to date, future field studies addressing treatment of this kind of effluent would be of great interest. Some topics to be considered in these studies would be coupling anaerobic digestion and ANR, analysis of the factors that affect the process, comparing reactor configurations, microbial ecology, gas emissions, and achieving robust performance. This paper provides an overview of published studies on ANR. Specific issues related to the applicability of the process for treating manure digestates are discussed. The energy requirements of ANR are compared with those of other technological alternatives aimed at recovering nitrogen from digester supernatants. The results of the assessment were shown to depend on the composition of the supernatant. In this regard, the PN-anammox process was shown to be more competitive than other alternatives particularly at concentrations of up to 2 kg NH4(+)-N m(-3).

Electrocatalytic reduction of nitrate ions in neutral medium at coinage metal-modified platinum electrodes.

Nitrate is a water-soluble toxic pollutant that needs to be excluded from the environment. For this purpose, several electrochemical studies have been conducted but most of them focused on the nitrate reduction reaction (NRR) in alkaline and acidic media while insignificant research is available in neutral media with Pt electrode. In this work, we explored the effect of three coinage metals (Cu, Ag, and Au) on Pt electrode for the electrochemical reduction of nitrate in neutral solution. Among the three electrodes, Pt-Cu exhibited the best catalytic activity toward NRR, whereas Pt-Au electrode did not show any reactivity. An activity order of Pt-Cu > Pt-Ag > Pt-Au was observed pertaining to NRR. The Pt-Ag electrode produces nitrite ions by reducing nitrate ions ([Formula: see text]. Meanwhile, at Pt-Cu electrode, nitrate reduction yields ammonia via both direct ([Formula: see text] and indirect ([Formula: see text] reaction pathways depending on the potential. The cathodic transfer coefficients were estimated to be ca. 0.40 and ca. 0.52, while the standard rate constants for nitrate reduction were calculated as ca. 2.544 × 10-2 cm.s-1 and ca. 1.453 × 10-2 cm.s-1 for Pt-Cu and Pt-Ag electrodes, respectively. Importantly, Pt-Cu and Pt-Ag electrodes execute NRR in the neutral medium between their respective Hydrogen-Evolution Reaction (HER) and Open-Circuit Potential (OCP), implying that on these electrodes, HER and NRR do not compete and the latter is a corrosion-free process.

·H effectively enhance electrocatalytic nitrogen fixation.

Nowadays, most reported ammonia (NH3) yields and Faradaic efficiency (FE) of electrocatalysts are very low in the field of electrocatalytic nitrogen reduction reactions (NRR). Here, we are reported ·H for the first time in the field of electrocatalytic NRR, which are generated by sulfite (SO32-) and H2O in electrolyte solutions upon exposure to UV light. The high NH3 yields can achieve 100.7 µg h-1 mgcat-1, while stability can achieve 64 h and the FE can achieve 27.1% at -0.3 V (vs. RHE) with UV irradiation. In situ Fourier transform infrared spectroscopy (FTIR), electron spin resonance (ESR), density functional theory (DFT) and 1H nuclear magnetic resonance (NMR) tests showed that the ∙H effectively lowered the reaction energy barrier at each step of the NRR process and inhibits the occurrence of competitive hydrogen evolution reaction (HER). This explores the path and provides ideas for the field of electrocatalysis involving water.

Highly efficient metal-free borocarbonitride catalysts for electrochemical reduction of N2 to NH3.

The electrocatalytic nitrogen reduction reaction (NRR) for ammonia (NH3) under ambient conditions is emerging as a potentially sustainable alternative to the traditional, energy-intensive Haber-Bosch process for ammonia production. Currently, metal-based electrocatalysts constitute the majority of reported NRR catalysts. However, they often suffer from the shortcomings of competitive reactions of nitrogen adsorption/activation and hydrogen generation. Therefore, there is an urgent need to develop more environmentally friendly, low energy consumption, and non-polluting high-performance metal-free electrocatalysts. In this study, borocarbonitride (BCN) materials derived from boron imidazolate framework (BIF-20) were used to boost efficient electrochemical nitrogen conversion to ammonia under ambient conditions. The BCN catalyst demonstrated excellent performance in 0.1 M KOH, with an ammonia yield of 21.62 µg h-1 mgcat-1 and a Faradaic efficiency of 9.88% at -0.3 V (Reversible Hydrogen Electrode, RHE). This performance is superior to most metal-free catalysts and even some metal catalysts for NRR. The 15N2/14N2 isotope labeling experiments and density functional theory (DFT) calculations showed that N2 can be adsorbed and converted to NH3 on the surface of BCN, and that the energy barrier can be significantly reduced by structural design for BCN. This work highlights the important role played by the presence of Lewis acid-base pairs in metal-free catalysts for enhancing electrochemical NRR performance.

Prediction of Three-Metal Cluster Catalysts on Two-Dimensional W2N3 Support with Integrated Descriptors for Electrocatalytic Nitrogen Reduction.

In the electrocatalytic nitrogen reduction reaction (NRR), nitrogen (N2) is chemically inert, it is difficult to break the triple bond, and the subsequent protonation step is very challenging. Suitable catalysts with high selectivity and high activity are needed to promote the electrocatalytic NRR. We screen a large number of clusters composed of three metal atoms embedded into a two-dimensional metal nitride, W2N3, with a N vacancy, and calculate the reaction energetics. The VNiCu cluster has the best catalytic activity among all the catalysts proposed so far. The Fe3 and Fe2Co clusters are excellent catalysts as well. In all cases, spin polarization is needed to observe the catalytic effect. We establish the optimal NRR path and confirm that it remains unchanged in the presence of a solvent. We find three groups of descriptors that can well predict the materials' properties and exhibit linear relationships with the NRR limiting potential.