Structural Study of the Thermoelectric Work Units Encapsulated with Cement Paste for Building Energy Harvesting.

Cement-based material encapsulation is a method of encapsulating electronic devices in highly thermally conductive cement-based materials to improve the heat dissipation performance of electronic components. In the field of construction, a thermoelectric generator (TEG) encapsulated with cement-based materials used in the building envelope has significant potential for waste heat energy recovery. The purpose of this study was to investigate the effect of cement-based materials integrated with aluminum heatsinks on the heat dissipation of the TEG composite structure. In this work, three types of thermoelectric work units encapsulated with cement paste were proposed. Moreover, we explored the effect of encapsulated structure, heat dissipation area, the height of thermoelectric single leg, and heat input temperature on maintaining the temperature difference between the two sides of the thermoelectric single leg with COMSOL Multiphysics. The numerical simulation results showed that under the conditions of a heat source temperature of 313.15 K and ambient temperature of 298.15 K, the temperature difference between the two sides of the internal thermoelectric single leg of Type-III can maintain a stable temperature difference of 7.77 K, which is 32.14% higher than that of Type-I and Type-II (5.88 K), and increased by 26.82% in the actual experiment. This work provides a reference for the selection and application of TEG composite structures of cement-based materials combined with aluminum heatsinks.

Optimal time for laparoscopic intrauterine insemination performed on ewes detected in natural heat.

The aim of this study was to optimize the laparoscopic intrauterine insemination (LAI) methodology by testing different time intervals between the natural heat detection and ewe insemination. Three experiments were performed in the breeding conditions of Southern Kazakhstan. Ewes (n = 243) were exposed for one hour to direct contact with the teaser rams (once a day, morning or evening). Ewes expressing behavioral symptoms of heat were detected and inseminated with the use of LAI during 210-1290 min (3.5-21.5 hrs) after heat detection. Reproductive traits of lambing rate (LR) and litter size (LS) were recorded according to the births registered at 137 to 152 days post insemination. Our statistical model showed significance only for the effects of ewe age category and the time interval from heat detection to LAI on the LR attribute. The highest LR (38.8%) was detected in ewes at 2.5-3.5 years of age. Corrected least-square means of LR indicated 18.5 hrs. as an optimal time for LAI of ewes in natural heat. In the present study, the percentage value of lambing rate obtained at 18.5 h interval was 70.7%. Therefore, our study suggested an effective methodology to spread valuable genetic information in the sheep population in the regions of extensive farming where heat cycle synchronization is not usually performed. Importantly, our study is among the first ones that follow the European strategy to eliminate the occurrence of hormones in livestock production and the environment.

Melatonin alleviates heat stress-induced testicular damage in dairy goats by inhibiting the PI3K/AKT signaling pathway.

Current measures mainly focus on how melatonin reduces physiological heat stress in animals, but its effects on reproductive damage to male dairy goats have been neglected. This study aimed to determine the protective effect of melatonin on male reproduction during heat stress in dairy goats and to further explore its mechanisms. A natural heat stress model of Saanen dairy goats was used to assess testicular tissue damage 7 days after heat stress and to examine semen quality changes during a spermatogenic cycle. RNA-seq, Western blot, RT-qPCR, and immunofluorescence staining were used to explore the mechanism by which melatonin protects against heat stress-induced reproductive damage and to validate the results. The data suggested that melatonin significantly alleviated the heat stress-induced decrease in sperm quality, protected varicose tubule structure, reduced the levels of heat shock proteins and apoptotic proteins and protected the spermatocytes and round spermatozoa, which are mainly affected by heat stress. RNA-seq results suggest that melatonin inhibits the PI3K/AKT signaling pathway, reduces the level of p-AKT, and promotes elevated BCL-2. In addition, melatonin treatment could upregulate the gene expression of MT2 which was downregulated by heat stress and improve the change in extracellular matrix components and restore serum testosterone levels. Our results suggest that melatonin can protect against testicular and spermatogenic cell damage and improve semen quality in male dairy goats under heat stress. This study provides an important reference for subsequent studies on the molecular mechanisms of melatonin in protecting male reproductive processes under heat stress and using exogenous melatonin to prevent heat stress.

Achieving quasi-adiabatic thermal environment to maximize resolution power in very high-pressure liquid chromatography: Theory, models, and experiments.

A cylindrical vacuum chamber (inner diameter 5 cm) housing a narrow-bore 2.1 mm×100 mm column packed with 1.8 µm HSS-T3 fully porous particles was built in order to isolate thermally the chromatographic column from the external air environment. Consistent with statistical physics and the mean free path of air molecules, the experimental results show that natural air convection and conduction are fully eliminated for housing air pressures smaller than 10(-4) Torr. Heat radiation is minimized by wrapping up the column with low-emissivity aluminum-tape (emissivity coefficient ϵ=0.03 vs. 0.28 for polished stainless steel 316). Overall, the heat flux at the column wall is reduced by 96% with respect to standard still-air ovens. From a practical viewpoint, the efficiency of the column run at a flow rate of 0.6 mL/min at a constant 13,000 psi pressure drop (the viscous heat power is around 9 W/m) is improved by up to 35% irrespective of the analyte retention. Models of heat and mass transfer reveal that (1) the amplitude of the radial temperature gradient is significantly reduced from 0.30 to 0.01 K and (2) the observed improvement in resolution power stems from a more uniform distribution of the flow velocity across the column diameter. The eddy dispersion term in the van Deemter equation is reduced by 0.8±0.1 reduced plate height unit, a significant gain in column performance.

Numerical study of natural convection in a horizontal cylinder filled with water-based alumina nanofluid.

Natural heat convection of water-based alumina (Al2O3/water) nanofluids (with volume fraction 1% and 4%) in a horizontal cylinder is numerically investigated. The whole three-dimensional computational fluid dynamics (CFD) procedure is performed in a completely open-source way. Blender, enGrid, OpenFOAM and ParaView are employed for geometry creation, mesh generation, case simulation and post process, respectively. Original solver 'buoyantBoussinesqSimpleFoam' is selected for the present study, and a temperature-dependent solver 'buoyantBoussinesqSimpleTDFoam' is developed to ensure the simulation is more realistic. The two solvers are used for same cases and compared to corresponding experimental results. The flow regime in these cases is laminar (Reynolds number is 150) and the Rayleigh number range is 0.7 × 10(7) ~ 5 × 10(7). By comparison, the average natural Nusselt numbers of water and Al2O3/water nanofluids are found to increase with the Rayleigh number. At the same Rayleigh number, the Nusselt number is found to decrease with nanofluid volume fraction. The temperature-dependent solver is found better for water and 1% Al2O3/water nanofluid cases, while the original solver is better for 4% Al2O3/water nanofluid cases. Furthermore, due to strong three-dimensional flow features in the horizontal cylinder, three-dimensional CFD simulation is recommended instead of two-dimensional simplifications.

Effects of the ambient temperature on the airflow across a Caucasian nasal cavity.

We analyse the effects of the air ambient temperature on the airflow across a Caucasian nasal cavity under different ambient temperatures using CFD simulations. A three-dimensional nasal model was constructed from high-resolution computed tomography images for a nasal cavity from a Caucasian male adult. An exhaustive parametric study was performed to analyse the laminar-compressible flow driven by two different pressure drops between the nostrils and the nasopharynx, which induced calm breathing flow rates ࣈ 5.7 L/min and ࣈ 11.3 L/min. The inlet air temperature covered the range - 10(o) C ⩽ To ⩽50(o) C. We observed that, keeping constant the wall temperature of the nasal cavity at 37(o) C, the ambient temperature affects mainly the airflow velocity into the valve region. Surprisingly, we found an excellent linear relationship between the ambient temperature and the air average temperature reached at different cross sections, independently of the pressure drop applied. Finally, we have also observed that the spatial evolution of the mean temperature data along the nasal cavity can be collapsed for all ambient temperatures analysed with the introduction of suitable dimensionless variables, and this evolution can be modelled with the help of hyperbolic functions, which are based on the heat exchanger theory.