Molecular architectures of iron complexes for oxygen reduction catalysis-Activity enhancement by hydroxide ions coupling.

Developing cost-effective and high-performance electrocatalysts for oxygen reduction reaction (ORR) is critical for clean energy generation. Here, we propose an approach to the synthesis of iron phthalocyanine nanotubes (FePc NTs) as a highly active and selective electrocatalyst for ORR. The performance is significantly superior to FePc in randomly aggregated and molecularly dispersed states, as well as the commercial Pt/C catalyst. When FePc NTs are anchored on graphene, the resulting architecture shifts the ORR potentials above the redox potentials of Fe2+/3+ sites. This does not obey the redox-mediated mechanism operative on conventional FePc with a Fe2+-N moiety serving as the active sites. Pourbaix analysis shows that the redox of Fe2+/3+ sites couples with HO- ions transfer, forming a HO-Fe3+-N moiety serving as the ORR active sites under the turnover condition. The chemisorption of ORR intermediates is appropriately weakened on the HO-Fe3+-N moiety compared to the Fe2+-N state and thus is intrinsically more ORR active.

Surface atom knockout for the active site exposure of alloy catalyst.

The fine regulation of catalysts by the atomic-level removal of inactive atoms can promote the active site exposure for performance enhancement, whereas suffering from the difficulty in controllably removing atoms using current micro/nano-scale material fabrication technologies. Here, we developed a surface atom knockout method to promote the active site exposure in an alloy catalyst. Taking Cu3Pd alloy as an example, it refers to assemble a battery using Cu3Pd and Zn as cathode and anode, the charge process of which proceeds at about 1.1 V, equal to the theoretical potential difference between Cu2+/Cu and Zn2+/Zn, suggesting the electricity-driven dissolution of Cu atoms. The precise knockout of Cu atoms is confirmed by the linear relationship between the amount of the removed Cu atoms and the battery cumulative specific capacity, which is attributed to the inherent atom-electron-capacity correspondence. We observed the surface atom knockout process at different stages and studied the evolution of the chemical environment. The alloy catalyst achieves a higher current density for oxygen reduction reaction compared to the original alloy and Pt/C. This work provides an atomic fabrication method for material synthesis and regulation toward the wide applications in catalysis, energy, and others.

Oxygen-bridging Fe, Co dual-metal dimers boost reversible oxygen electrocatalysis for rechargeable Zn-air batteries.

Rechargeable zinc-air batteries (ZABs) are regarded as a remarkably promising alternative to current lithium-ion batteries, addressing the requirements for large-scale high-energy storage. Nevertheless, the sluggish kinetics involving oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) hamper the widespread application of ZABs, necessitating the development of high-efficiency and durable bifunctional electrocatalysts. Here, we report oxygen atom-bridged Fe, Co dual-metal dimers (FeOCo-SAD), in which the active site Fe-O-Co-N6 moiety boosts exceptional reversible activity toward ORR and OER in alkaline electrolytes. Specifically, FeOCo-SAD achieves a half-wave potential (E1/2) of 0.87 V for ORR and an overpotential of 310 mV at a current density of 10 mA cm-2 for OER, with a potential gap (ΔE) of only 0.67 V. Meanwhile, FeOCo-SAD manifests high performance with a peak power density of 241.24 mW cm-2 in realistic rechargeable ZABs. Theoretical calculations demonstrate that the introduction of an oxygen bridge in the Fe, Co dimer induced charge spatial redistribution around Fe and Co atoms. This enhances the activation of oxygen and optimizes the adsorption/desorption dynamics of reaction intermediates. Consequently, energy barriers are effectively reduced, leading to a strong promotion of intrinsic activity toward ORR and OER. This work suggests that oxygen-bridging dual-metal dimers offer promising prospects for significantly enhancing the performance of reversible oxygen electrocatalysis and for creating innovative catalysts that exhibit synergistic effects and electronic states.

Dual-axial engineering on atomically dispersed catalysts for ultrastable oxygen reduction in acidic and alkaline solutions.

Atomically dispersed catalysts are a promising alternative to platinum group metal catalysts for catalyzing the oxygen reduction reaction (ORR), while limited durability during the electrocatalytic process severely restricts their practical application. Here, we report an atomically dispersed Co-doped carbon-nitrogen bilayer catalyst with unique dual-axial Co-C bonds (denoted as Co/DACN) by a smart phenyl-carbon-induced strategy, realizing highly efficient electrocatalytic ORR in both alkaline and acidic media. The corresponding half-wave potential for ORR is up to 0.85 and 0.77 V (vs. reversible hydrogen electrode (RHE)) in 0.5 M H2SO4 and 0.1 M KOH, respectively, representing the best ORR activity among all non-noble metal catalysts reported to date. Impressively, the Zn-air battery (ZAB) equipped with Co/DACN cathode achieves outstanding durability after 1,688 h operation at 10 mA cm-2 with a high current density (154.2 mA cm-2) and a peak power density (210.1 mW cm-2). Density functional theory calculations reveal that the unique dual-axial cross-linking Co-C bonds of Co/DACN significantly enhance the stability during ORR and also facilitate the 4e- ORR pathway by forming a joint electron pool due to the improved interlayer electron mobility. We believe that axial engineering opens a broad avenue to develop high-performance heterogeneous electrocatalysts for advanced energy conversion and storage.

Precise arrangement of metal atoms at the interface by a thermal printing strategy.

The kinetics and pathway of most catalyzed reactions depend on the existence of interface, which makes the precise construction of highly active single-atom sites at the reaction interface a desirable goal. Herein, we propose a thermal printing strategy that not only arranges metal atoms at the silica and carbon layer interface but also stabilizes them by strong coordination. Just like the typesetting of Chinese characters on paper, this method relies on the controlled migration of movable nanoparticles between two contact substrates and the simultaneous emission of atoms from the nanoparticle surface at high temperatures. Observed by in situ transmission electron microscopy, a single Fe3O4 nanoparticle migrates from the core of a SiO2 sphere to the surface like a droplet at high temperatures, moves along the interface of SiO2 and the coated carbon layer, and releases metal atoms until it disappears completely. These detached atoms are then in situ trapped by nitrogen and sulfur defects in the carbon layer to generate Fe single-atom sites, exhibiting excellent activity for oxygen reduction reaction. Also, sites' densities can be regulated by controlling the size of Fe3O4 nanoparticle between the two surfaces. More importantly, this strategy is applicable to synthesize Mn, Co, Pt, Pd, Au single-atom sites, which provide a general route to arrange single-atom sites at the interface of different supports for various applications.

A first principles analysis of potential-dependent structural evolution of active sites in Fe-N-C catalysts.

Fe-N-C (iron-nitrogen-carbon) electrocatalysts have emerged as potential alternatives to precious metal-based materials for the oxygen reduction reaction (ORR). However, the structure of these materials under electrochemical conditions is not well understood, and their poor stability in acidic environments poses a formidable challenge for successful adoption in commercial fuel cells. To provide molecular-level insights into these complex phenomena, we combine periodic density functional theory (DFT) calculations, exhaustive treatment of coadsorption effects for ORR reaction intermediates, including O and OH, and comprehensive analysis of solvation stabilization effects to construct voltage-dependent ab initio thermodynamic phase diagrams that describe the in situ structure of the active sites. These structures are further linked to activity and stability descriptors that can be compared with experimental parameters such as the half-wave potential for ORR and the onset potential for carbon corrosion and CO2 evolution. The results indicate that pyridinic Fe sites at zigzag carbon edges, as well as other edge sites, exhibit high activity for ORR compared to sites in the bulk. However, edges neighboring the active sites are prone to instability via overoxidation and consequent site loss. The results suggest that it could be beneficial to synthesize Fe-N-C catalysts with small sizes and large perimeter edge lengths to enhance ORR activity, while voltage fluctuations should be limited during fuel cell operation to prevent carbon corrosion of overoxidized edges.

Dual-functional single-atomic Mo/Fe clusters-decorated C3N5 via three electron-pathway in oxygen reduction reaction for tandemly removing contaminants from water.

Inspired by the development of single-atom catalysts (SACs), the fabrication of multimetallic SACs can be a promising technical approach for the in situ electro-Fenton (EF) process. Herein, dual-functional atomically dispersed Mo-Fe sites embedded in carbon nitride (C3N5) (i.e., MoFe/C3N5) were synthesized via a facile SiO2 template method. The atomically isolated bimetallic configuration in MoFe/C3N5 was identified by combining the microscopic and spectroscopic techniques. The MoFe/C3N5 catalyst on the cathode exhibited a remarkable catalytic activity toward the three electron-dominated oxygen reduction reaction in sodium sulfate, leading to a highly effective EF reaction with a low overpotential for the removal of organic contaminants from wastewater. The new catalyst showed a superior performance over its conventional counterparts, owing to the dual functions of the dual-metal active sites. Density functional theory (DFT) analysis revealed that the dual-functional 50-MoFe/C3N5 catalyst enabled a synergistic action of the Mo-Fe dual single atomic centers, which can alter the adsorption/dissociation behavior and decrease the overall reaction barriers for effective organic oxidation during the EF process. This study not only sheds light on the controlled synthesis of atomically isolated catalyst materials but also provides deeper understanding of the structure-performance relationship of the nanocatalysts with dual active sites for the catalytic EF process. Additionally, the findings will promote the advanced catalysis for the treatment of emerging organic contaminants in water and wastewater.

Double-atom dealloying-derived Frank partial dislocations in cobalt nanocatalysts boost metal-air batteries and fuel cells.

Oxygen reduction reaction (ORR), an essential reaction in metal-air batteries and fuel cells, still faces many challenges, such as exploiting cost-effective nonprecious metal electrocatalysts and identifying their surface catalytic sites. Here we introduce bulk defects, Frank partial dislocations (FPDs), into metallic cobalt to construct a highly active and stable catalyst and demonstrate an atomic-level insight into its surface terminal catalysis. Through thermally dealloying bimetallic carbide (Co3ZnC), FPDs were in situ generated in the final dealloyed metallic cobalt. Both theoretical calculations and atomic characterizations uncovered that FPD-driven surface terminations create a distinctive type of surface catalytic site that combines concave geometry and compressive strain, and this two-in-one site intensively weakens oxygen binding. When being evaluated for the ORR, the catalyst exhibits onset and half-wave potentials of 1.02 and 0.90 V (versus the reversible hydrogen electrode), respectively, and negligible activity decay after 30,000 cycles. Furthermore, zinc-air batteries and H2-O2/air fuel cells built with this catalyst also achieve remarkable performance, making it a promising alternative to state-of-the-art Pt-based catalysts. Our findings pave the way for the use of bulk defects to upgrade the catalytic properties of nonprecious electrocatalysts.

Simultaneous Mapping of Electrocatalytic Activity and Selectivity via Hybrid Scanning Electrochemical Probe Microscopy.

Nanoscale scanning electrochemical probe microscopy started to elucidate the heterogeneity of electrocatalytic activity at electrode surfaces. However, understanding the heterogeneity in product selectivity, another crucial aspect of interfacial reactivity, remains challenging. Herein, we introduce a method combining scanning electrochemical microscopy (SECM) and scanning electrochemical cell microscopy (SECCM) to enable the spatially resolved mapping of both activity and selectivity in electrocatalysis. A dual-channel nanopipette probe was developed: one channel for activity mapping and the other for product detection with a high collection efficiency (>95%) and sensitivity. Simultaneous mapping of activity and selectivity in the oxygen reduction reaction (ORR) is demonstrated. Combined with colocalized crystal orientation mapping, we uncover the local electrocatalytic performance of ORR at different facets on polycrystalline Pt and Au. The high-resolution selectivity mapping enabled by our method with colocalized structural characterization can provide structure-activity-selectivity relationships that are often unavailable in ensemble measurement, holding promise for understanding key structural motifs controlling interfacial reactivity.

Amorphization Activated Multimetallic Pd Alloys for Boosting Oxygen Reduction Catalysis.

Amorphous nanomaterials have drawn extensive attention owing to their unique features, while amorphization on noble metal nanomaterials still remains formidably challenging. Herein, we demonstrate a universal strategy to synthesize amorphous Pd-based nanomaterials from unary to quinary metals through the introduction of phosphorus (P). The amorphous Pd-based nanoparticles (NPs) exhibit generally promoted oxygen reduction reaction (ORR) activity and durability compared with their crystalline counterparts. Significantly, the quinary P-PdCuNiInSn NPs, benefiting from the amorphous structure and multimetallic component effect, exhibit mass activities as high as 1.04 A mgPd-1 and negligible activity decays of 1.8% among the stability tests, which are much better than values for original Pd NPs (0.134 A mgPd-1 and 28.4%). Experimental and theoretical analyses collectively reveal that the synergy of P-induced amorphization and the expansion of metallic components can considerably lower the free energy changes in the rate-determined step, thereby explaining the positive correlation with the catalytic activity.

Engineering a High-Loading Sub-4 nm Intermetallic Platinum-Cobalt Alloy on Atomically Dispersed Cobalt-Nitrogen-Carbon for Efficient Oxygen Reduction in Fuel Cells.

Developing a high-performance membrane electrode assembly (MEA) poses a formidable challenge for fuel cells, which lies in achieving both high metal loading and efficient catalytic activity concurrently for MEA catalysts. Here, we introduce a porous Co@NC carrier to synthesize sub-4 nm PtCo intermetallic nanocrystals, achieving an impressive Pt loading of 27 wt %. The PtCo-CoNC catalyst demonstrates exceptional catalytic activity and remarkable stability for the oxygen reduction reaction. Advanced characterization techniques and theoretical calculations emphasize the synergistic effect between PtCo alloys and single Co atoms, which enhances the desorption of the OH* intermediate. Furthermore, the PtCo-CoNC-based cathode delivers a high power density of 1.22 W cm-2 in the MEA test owing to the enhanced mass transport, which is verified by the simulation results of the O2 distributions and current density inside the catalyst layer. This study lays the groundwork for the design of efficient catalysts with practical applications in fuel cells.

Molecular Unravelling of the Structural Effect of Quinone Redox Mediators on Oxygen Reduction Reaction in Aprotic Lithium-Oxygen Batteries.

Redox mediators (RMs) provide tantalizing solutions to unlock the energy capabilities of aprotic lithium-oxygen (Li-O2) batteries by driving solution-mediated Li2O2 growth. However, the structural effect of RMs on the catalytic efficiency of the oxygen reduction reaction remains incompletely understood. Herein, we present the interplay between the structure of RMs and their discharge capabilities by a comparative study of model quinone (Q)-based RMs. Specifically, at low current densities, incorporating electron-withdrawing groups onto the Q ring can positively move the discharge potential and deliver larger discharge capacity by extending the lifespan of the LiQO2 intermediate and allowing for Li2O2 growth into deeper electrolyte regions. Conversely, at high current densities, the absence of electron-withdrawing groups facilitates homogeneous reaction kinetics from LiQ to regenerate Q (i.e., decreased lifespan of LiQO2), mitigating electrode potential polarization and preserving catalytic activity of Q for higher discharge capacity. The work establishes structure-property relationships that guide the rational design of RMs toward next-generation Li-O2 batteries.

Efficient Proton Transfer and Charge Separation within Covalent Organic Frameworks via Hydrogen-Bonding Network to Boost H2O2 Photosynthesis.

Photocatalytic synthesis based on the oxygen reduction reaction (ORR) has shown great promise for H2O2 production. However, the low activity and selectivity of 2e- ORR result in a fairly low efficiency of H2O2 production. Herein, we propose a strategy to enhance the proton-coupled electron transfer (PCET) process in covalent organic frameworks (COFs), thereby significantly boosting H2O2 photosynthesis. We demonstrated that the construction of a hydrogen-bonding network, achieved by anchoring the H3PO4 molecular network on COF nanochannels, can greatly improve both proton conductivity and photogenerated charge separation efficiency of COFs. Thus, COF@H3PO4 exhibited superior photocatalytic performance in generating H2O2 without sacrificial agents, with a solar-to-chemical conversion efficiency as high as 0.69%. Results indicated that a much more localized spatial distribution of energy band charge density on COF@H3PO4 led to efficient charge separation, and the small energy barrier of the rate-limiting step from *OOH to H2O2 endowed COF@H3PO4 with higher 2e- ORR selectivity.

Reconstruction of High Entropy Alloys on a Metal-Organic Framework Approaching Active Oxygen Reduction Electrocatalysts.

High-entropy alloys (HEAs) have garnered considerable attention as promising nanocatalysts for effectively utilizing Pt in catalysis toward oxygen reduction reactions due to their unique properties. Nonetheless, there is a relative dearth of attention regarding the structural evolution of HEAs in response to electrochemical conditions. In this work, we propose a thermal reduction method to synthesize high entropy nanoparticles by leveraging the confinement effect and abundant nitrogen-anchored sites provided by pyrolyzed metal-organic frameworks (MOFs). Notably, the prepared catalysts exhibit enhanced activity accompanied by structural reconstruction during electrochemical activation, approaching 1 order of magnitude higher mass activity compared to Pt/C in oxygen reduction. Atomic-scale structural characterization reveals that abundant defects and single atoms are formed during the activation process, contributing to a significant boost in the catalytic performance for oxygen reduction reactions. This study provides deep insights into surface reconstruction engineering during electrochemical operations, with practical implications for fuel cell applications.

Molten-Salt Electrochemical-Assisted Synthesis of the CeO2-OV@GC Composite-Supported Pt Clusters with a Pt-O-Ce Structure for the Oxygen Reduction Reaction.

Highly active and robust Pt-based electrocatalysts for an oxygen reduction reaction (ORR) are of crucial significance for the development of proton exchange membrane fuel cells (PEMFCs). Herein, the high-loading and well-dispersive Pt clusters on graphitic carbon-supported CeO2 with abundant oxygen vacancies (PtAC/CeO2-OV@GC) were successfully fabricated by a molten-salt electrochemical-assisted method. The bonding of Pt with the highly electronegative O induces charge redistribution through the Pt-O-Ce structure, thus reducing the adsorption energies of oxygen-containing species. Such a PtAC/CeO2-OV@GC electrocatalyst exhibits a greatly enhanced ORR performance with a mass activity of 0.41 ± 0.02 A·mg-1Pt at 0.9 V versus a reversible hydrogen electrode, which is 2.7 times the value of a commercial Pt/C catalyst and shows negligible activity decay after 20000 cycles of accelerated degradation tests. It is anticipated that this work will provide enlightening guidance on the controllable synthesis and rational design of high-performance Pt-based electrocatalysts for PEMFCs.

Multiscale Regulation of Ordered PtCu Intermetallic Electrocatalyst for Highly Durable Oxygen Reduction Reaction.

Transforming the Pt-M alloy into an ordered intermetallic is an effective strategy to improve the electrocatalytic activity and stability toward the oxygen reduction reaction (ORR). However, the synthesis of nanosized intermetallics remains challenging. Herein, we report an efficient ORR electrocatalyst, consisting of a monodisperse nanosized PtCu intermetallic on hollow mesoporous carbon spheres (HMCS). As predicted by theoretical calculations, PtCu intermetallics exhibit beneficial electronic structure, with a low theoretical overpotential of 0.33 V and enhanced Cu stability. Resulting from the multiscale modulation of catalyst structure, the O-PtCu/HMCS catalyst delivers a high mass activity of 2.73 A cm-2Pt at 0.9 V and remarkable stability. Identical location transmission electron microscopy (IL-TEM) investigations demonstrate that the rate of carbon corrosion is alleviated on HMCS, which contributes to the long-term durability. This work provides a promising design strategy for an ORR electrocatalyst, and the IL-TEM investigations offer new perspectives for the performance enhancement mechanism.

Self-Assembly Intermetallic PtCu3 Core with High-Index Faceted Pt Shell for High-Efficiency Oxygen Reduction.

Rational design of well-defined active sites is crucial for promoting sluggish oxygen reduction reactions. Herein, leveraging the surfactant-oriented and solvent-ligand effects, we develop a facile self-assembly strategy to construct a core-shell catalyst comprising a high-index Pt shell encapsulating a PtCu3 intermetallic core with efficient oxygen-reduction performance. Without undergoing a high-temperature route, the ordered PtCu3 is directly fabricated through the accelerated reduction of Cu2+, followed by the deposition of the remaining Pt precursor onto its surface, forming high-index steps oriented by the steric hindrance of surfactant. This approach results in a high half-wave potential of 0.911 V versus reversible hydrogen electrode, with negligible deactivation even after 15000-cycle operation. Operando spectroscopies identify that this core-shell catalyst facilitates the conversion of oxygen-involving intermediates and ensures antidissolution ability. Theoretical investigations rationalize that this improvement is attributed to reinforced electronic interactions around high-index Pt, stabilizing the binding strength of rate-determining OHads species.

Vacancy-Enhanced Sb-N4 Sites for the Oxygen Reduction Reaction and Zn-Air Battery.

With the advantages of a Fenton-inactive characteristic and unique p electrons that can hybridize with O2 molecules, p-block metal-based single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) have tremendous potential. Nevertheless, their undesirable intrinsic activity caused by the closed d10 electronic configuration remains a major challenge. Herein, an Sb-based SAC featuring carbon vacancy-enhanced Sb-N4 active centers, corroborated by the results of high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure, has been developed for an incredibly effective ORR. The obtained SbSA-N-C demonstrates a positive half-wave potential of 0.905 V and excellent structural stability in alkaline environments. Density functional theory calculations reveal that the carbon vacancies weaken the adsorption between Sb atoms and the OH* intermediate, thus promoting the ORR performance. Practically, the SbSA-N-C-based Zn-air batteries achieve impressive outcomes, such as a high power density of 181 mW cm-2, showing great potential in real-world applications.

A Janus Platinum/Tin Oxide Heterostructure for Durable Oxygen Reduction Reaction.

Designing efficient and durable electrocatalysts for oxygen reduction reaction (ORR) is essential for proton exchange membrane fuel cells (PEMFCs). Platinum-based catalysts are considered efficient ORR catalysts due to their high activity. However, the degradation of Pt species leads to poor durability of catalysts, limiting their applications in PEMFCs. Herein, a Janus heterostructure is designed for high durability ORR in acidic media. The Janus heterostructure composes of crystalline platinum and cassiterite tin oxide nanoparticles with carbon support (J-Pt@SnO2/C). Based on the synchrotron fine structure analysis and electrochemical investigation, the crystalline reconstruction and charge redistribution at the interface of Janus structure are revealed. The tightly coupled interface could optimize the valance states of Pt and the adsorption/desorption of oxygenated intermediates. As a result, the J-Pt@SnO2/C catalyst possesses distinguishing long-term stability during the accelerated durability test without obvious degradation after 40 000 cycles and keeps the majority of activity after 70 000 cycles. Meanwhile, the catalyst exhibits outstanding activity with half-wave potential at 0.905 V and a mass activity of 0.355 A mgPt -1 (2.7 times higher than Pt/C). The approach of the Janus catalyst paves an avenue for designing highly efficient and stable Pt-based ORR catalyst in the future implementation.

Crystal-Phase- and B-Content-Dependent Electrochemical Behavior of Pd─B Nanocrystals toward Oxygen Reduction Reaction.

The manipulation of crystal phases in metal-nonmetal interstitial alloy nanostructures has attracted considerable attention due to the formation of unique electronic structures and surface atomic arrangements, resulting in unprecedented catalytic performances. However, achieving simultaneous control over crystal phase and nonmetal elements in metal-nonmetal interstitial alloy nanostructures has remained a formidable challenge. Here, a novel synthesis approach is presented for Pd─B interstitial alloy nanocrystals (NCs) that allows investigation of the crystal-phase- and B-content-dependent catalytic performance. Through comparison of the oxygen reduction reaction (ORR) properties of Pd─BX interstitial alloy NCs with different crystal phases and B contents, achieved by precise control of reaction temperature and time, the influences of crystal phase and B contents in the Pd─BX interstitial alloy NCs on ORR are precisely investigated. The hexagonal closed packed (hcp) PdB0.5 NCs exhibit superior catalytic activity, with mass activities reaching 2.58 A mg-1, surpassing Pd/C by 10.3 times, attributed to synergistic effects by the hcp crystal phase and relatively high B contents. This study not only provides a novel approach to fabricate interstitial alloy nanostructures with unconventional crystal phases and finely controlled nonmetal elements but also elucidates the importance of crystal phase and nonmetal element content in optimizing electrocatalytic efficiency.