Muscle architectural properties indicate a primary role in support for the pelvic limb of three-toed sloths (Bradypus variegatus).

Tree sloths evolved below-branch locomotion making them one of few mammalian taxa beyond primates for which suspension is nearly obligatory. Suspension requires strong limb flexor muscles that provide both propulsion and braking/support, and available locomotor kinetics data indicate that these roles differ between fore- and hindlimb pairs. Muscle structure in the pelvic limb is hypothesized to be a key anatomical correlate of function in braking/support during suspensory walking and propulsion and/or support during vertical climbing. This expectation was tested by quantifying architecture properties in the hindlimb limb musculature of brown-throated three-toed sloths (Bradypus variegatus: N = 7) to distinguish the roles of the flexor/extensor functional muscle groups at each joint. Measurements of muscle moment arm (rm ), mass, belly length, fascicle length, pennation angle, and physiological cross-sectional area (PCSA) were taken from n = 45 muscles. Overall, most muscles studied show properties for contractile excursion and fast joint rotational velocity. However, the flexor musculature is more massive (p = 0.048) and has larger PCSA (p = 0.003) than the extensors, especially at the knee joint and digits where well-developed and strong flexors are capable of applying large joint torque. Moreover, selected hip flexors/extensors and knee flexors have modified long rm that can amplify applied joint torque in muscles with otherwise long, parallel fascicles, and one muscle (m. iliopsoas) was capable of moderately high power in B. variegatus. The architectural properties observed in the hip flexors and extensors match well with roles in suspensory braking and vertical propulsion, respectively, whereas strong knee flexors and digital flexors appear to be the main muscles providing suspensory support in the pelvic limb. With aid in support by the forelimbs and the use of adaptive slow locomotion and slow muscle fiber recruitment patterns, structure-function in the tensile limb systems of sloths appears to collectively represent an additional mechanism for energy conservation.

Regional muscle features and their association with knee extensors force production at a single joint angle.

This study aimed (i) to investigate the role of regional characteristics of the knee extensors muscles (vastus lateralis: VL, vastus intermedius: VI and rectus femoris: RF) in determining maximum-voluntary force (MVF); and (ii) to understand which regional parameter of muscle structure would best predict MVF. Muscle architecture (e.g., pennation angle and fascicle length), muscle volume (Vol), anatomical (ACSA) and physiological cross-sectional-area (PCSA) were measured in the proximal (0-33% of the muscle length), middle (33-66% of the muscle length) and distal (66-100% of the muscle length) portions of each muscle in fifteen healthy males using ultrasound and Magnetic Resonance Imaging (MRI). Knee extensors force was calculated in isometric condition at a single knee joint angle of 90 degrees. Regional ACSA, Vol and PCSA were correlated with MVF production. Regional muscle geometry showed no significant correlations with MVF. Among regions, the middle portion of each muscle was largely correlated with MVF compared to all the other regions (distal and proximal). To understand which regional structural parameter best predicted MVF, a stepwise multiple linear regression was performed. This model showed a significant explanatory power (P < 0.001, R2 = 0.76, adjusted R2 = 0.71), including muscle Vol collected in the mid portions of VL and RF. Even if no significant differences were reported between Vol, PCSA and ACSA in determining MVF, our results showed that the RF and VL volume collected in the middle portion of the muscle length are strong determinants of MVF produced by the knee extensors at 90 degrees joint angle.

Myological variation in the forearm anatomy of Callitrichidae and Lemuridae.

The anatomy of the primate forearm is frequently investigated in terms of locomotor mode, substrate use, and manual dexterity. Such studies typically rely upon broad, interspecific samples for which one or two representative taxa are used to characterize the anatomy of their genus or family. To interpret variation between distantly related taxa, however, it is necessary to contextualize these differences by quantifying variation at lower hierarchical levels, that is, more fine-grained representation within specific genera or families. In this study, we present a focused evaluation of the variation in muscle organization, integration, and architecture within two speciose primate families: the Callitrichidae and Lemuridae. We demonstrate that, within each lineage, several muscle functional groups exhibit substantial variation in muscle organization. Most notably, the digital extensors appear highly variable (particularly among callitrichids), with many unique configurations represented. In terms of architectural variables, both families are more conservative, with the exception of the genus Callimico-for which an increase is observed in forearm muscle mass and strength. We suggest this reflects the increased use of vertical climbing and trunk-to-trunk leaping within this genus relative to the more typically fine-branch substrate use of the other callitrichids. Overall, these data emphasize the underappreciated variation in forearm myology and suggest that overly generalized typification of a taxon's anatomy may conceal significant intraspecific and intrageneric variation therein. Thus, considerations of adaptation within the forearm musculature should endeavor to consider the full range of anatomical variation when making comparisons between multiple taxa within an evolutionary context.

Extraordinary grip strength and specialized myology in the hyper-derived hand of Perodicticus potto?

Previous behavioral reports of the African lorisid, Perodicticus potto, have speculated that these animals have an extraordinary grip strength. This ability is hypothesized to be facilitated by a range of anatomical features within the forelimb, ranging from the presence of a retia mirabilia in its wrist to the hyper-abduction of its pollex. Despite numerous behavioral reports, however, this claim of extraordinary grip strength has not been empirically substantiated. This study quantifies the physiological cross-sectional area of the digital flexor muscles within P. potto. These data are compared with a broad primate sample, including several similarly sized strepsirrhines. Contrary to expectation, we found that P. potto actually has relatively below-average digital flexor PCSA. However, we identified other myological characteristics in the upper limb of P. potto that were unexpected, including the largest brachioradialis muscle (an elbow flexor) among our primate sample, and - despite P. potto having only a vestigial second digit - an independent digital extensor indicis that is absent in almost a quarter of our primate sample.

Ontogenetic changes to muscle architectural properties within the jaw-adductor musculature of Macaca fascicularis.

OBJECTIVES: Changes to soft- and hard-tissue components of the masticatory complex during development can impact functional performance by altering muscle excursion potential, maximum muscle forces, and the efficiency of force transfer to specific bitepoints. Within Macaca fascicularis, older individuals exploit larger, more mechanically resistant food items and more frequently utilize wide-gape jaw postures. We therefore predict that key architectural and biomechanical variables will scale during ontogeny to maximize bite force and gape potential within older, larger-bodied individuals. MATERIALS AND METHODS: We analyzed 26 specimens of M. fascicularis, representing a full developmental spectrum. The temporalis, superficial masseter, and deep masseter were dissected to determine muscle mass, fiber length, and physiologic cross-sectional area (PCSA). Lever-arm lengths were also measured for each muscle, alongside the height of the temporomandibular joint (TMJ) and basicranial length. These variables were scaled against two biomechanical variables (jaw length and condyle-molar length) to determine relative developmental changes within these parameters. RESULTS: During ontogeny, muscle mass, fiber length, and PCSA scaled with positive allometry relative to jaw length and condyle-molar length within all muscles. TMJ height also scaled with positive allometry, while muscle lever arms scaled with isometry relative to jaw length and with positive allometry (temporalis) or isometry (superficial and deep masseter) relative to condyle-molar length. CONCLUSION: Larger individuals demonstrate adaptations during development towards maximizing gape potential and bite force potential at both an anterior and posterior bitepoint. These data provide anatomical evidence to support field observations of dietary and behavioral differences between juvenile and adult M. fascicularis.

Medial gastrocnemius specific force of adult men with spastic cerebral palsy.

INTRODUCTION: Muscle weakness determines functional impairment in spastic cerebral palsy (SCP). Measurement of specific force (SF) allows for strength comparison with unimpaired populations (controls) accounting for neural (activation and coactivation), architectural (fascicle length and pennation angle), and structural differences (moment arm length). METHODS: Medial gastrocnemius (MG) SF (and its determinants) was assessed in both paretic and non-paretic legs of 11 men with SCP and 11 age-matched controls during plantarflexion maximal voluntary isometric contraction (MVIC). RESULTS: SCP fascicles were 28% longer than control fascicles (P < 0.05). Pennation angle of SCP patients was 41% smaller than in controls. The physiological cross-sectional area of SCP MG patients was 47% smaller than in controls (P < 0.05). There was no difference in SF between controls and SCP patients. CONCLUSIONS: Weakness in SCP is primarily attributable to deficits in agonist activation and muscle size; consequently, SF measured in the MG is similar between SCP and controls. Muscle Nerve 56: 298-306, 2017.

Pelvic and lower extremity physiological cross-sectional areas: an MRI study of the living young and comparison to published research literature.

PURPOSE: Morphological data pertaining to the pelvis and lower extremity muscles are increasingly being used in biomechanical modeling to compare healthy and pathological conditions. Very few data sets exist that encompass all of the muscles of the lower limb, allowing for comparisons between regions. The aims of this study were to (a) provide physiological cross-sectional area (PCSA) data for the pelvic, thigh, and leg muscles in young, healthy participants, using magnetic resonance imaging (MRI), and (b) to compare these data with summarized PCSAs obtained from the literature. MATERIALS AND METHODS: Six young and healthy volunteers participated and were scanned using 3 T MRI. PCSAs were calculated from volumetric segmentations obtained bilaterally of 28 muscles/muscle groups of the pelvis, thigh, and leg. These data were compared to published, summarized PCSA data derived from cadaveric, computed tomography, MRI and ultrasound studies. RESULTS: The PCSA of the pelvis, thigh, and leg muscles tended to be 20-130% larger in males than in females, except for the gemelli which were 34% smaller in males, and semitendinosus and triceps surae which did not differ (<20% different). The dominant and the non-dominant sides showed similar and minutely different PCSA with less than 18% difference between sides. Comparison to other studies revealed wide ranges within, and large differences between, the cadaveric and imaging PCSA data. Comparison of the PCSA of this study and published literature revealed major differences in the iliopsoas, gluteus minimus, tensor fasciae latae, gemelli, obturator internus, biceps femoris, quadriceps femoris, and the deep leg flexor muscles. CONCLUSIONS: These volume-derived PCSAs of the pelvic and lower limb muscles alongside the data synthesised from the literature may serve as a basis for comparative and biomechanical studies of the living and healthy young, and enable calculation of muscle forces. Comparison of the literature revealed large variations in PCSA from each of the different investigative modalities, hampering comparability between studies. Sample size, age, post-mortem changes of muscle tone, chemical fixation of cadaveric tissues, and the underlying physics of the imaging techniques may potentially influence PCSA calculations.

Jaw-muscle force and excursion scale with negative allometry in platyrrhine primates.

OBJECTIVES: Platyrrhines span two orders of magnitude in body size and are characterized by diverse feeding behaviors and diets. While size plays an important role in primate feeding behavior and masticatory apparatus morphology, we know little about size-correlated changes in the force-generating (physiologic cross-sectional area; PCSA) and excursion/stretch (fiber length; Lf ) capabilities of the jaw-closing muscles in platyrrhines. METHODS: We examined scaling relationships of the superficial masseter and temporalis muscles in 21 platyrrhine species. Previous work suggests that larger platyrrhines are at a mechanical disadvantage for generating bite forces compared with smaller platyrrhines. We hypothesize that scaling of jaw-muscle fiber architecture counters this size-correlated decrease in mechanical advantage. Thus, we predicted that jaw-muscle PCSAs and muscle weights scale with positive allometry while Lf s scale with negative allometry, relative to load-arm estimates for incisor/molar biting and chewing. RESULTS: Jaw-muscle PCSAs and Lf s appear to scale with negative allometry relative to load-arm estimates and body size. Negative allometry of jaw-muscle weights partially accounts for the size-correlated decreases in PCSA and Lf . Estimates of bite force also scale with negative allometry. CONCLUSION: Large-bodied platyrrhines (e.g., Alouatta) are at a relative disadvantage for generating jaw-muscle and bite force as well as jaw-muscle stretch, compared with smaller species (e.g., Callithrix). The net effect is that larger platyrrhines likely produce relatively smaller maximal bite forces compared with smaller taxa. Relative to small- and intermediate-sized platyrrhines, large-bodied platyrrhines feed on some of the least mechanically challenging foods, consistent with the size-correlated decrease in relative muscle and bite forces across the clade. Am J Phys Anthropol, 2015. © 2015 Wiley Periodicals, Inc. Am J Phys Anthropol 158:242-256, 2015. © 2015 Wiley Periodicals, Inc.

The comparative and functional anatomy of the forelimb muscle architecture of Humboldt's woolly monkey (Lagothrix lagotricha).

Humboldt's woolly monkey (Lagothrix lagortricha) is a ceboid primate that more frequently engages in plantigrade quadrupedalism (~89%) but is, like most other members of the subfamily Atelinae, capable of suspensory postures and "tail assisted" brachiation. That taxon's decreased reliance on suspension is reflected in the skeletal anatomy of the upper limb which is less derived relative to more frequently suspensory atelines (Ateles, Brachyteles) but is in many ways (i.e., phalangeal curvature, enlarged joint surfaces, elongated diaphyses) intermediate between highly suspensory and quadrupedal anthropoids. Although it has been suggested that muscle may have morphogenetic primacy with respect to bone this has not been explicitly tested. The present study employs analyses of Lagothrix upper limb muscle fiber length, relative physiological cross-sectional area and relative muscle mass to test whether muscular adaptations for suspensory postures and locomotion in Lagothrix precede adaptive refinements in the skeletal tissues or appear more gradually in conjunction with related skeletal adaptations. Results demonstrate that Lagothrix upper limb musculature is most like committed quadrupeds but that limited aspects of the relative distribution of segmental muscle mass may approach suspensory hylobatids consistent with only a limited adaptive response in musculature prior to bone. Results specific to the shoulder were inconclusive owing to under-representation of quadrupedal shoulder musculature and future work should be focused more specifically on the adaptive and functional morphology of the muscular anatomy and microstructure of the scapulothoracic joint complex.

The impact of measurement technique and sampling on estimates of skeletal muscle fibre architecture.

Skeletal muscle fibre architecture provides important insights into performance of vertebrate locomotor and feeding behaviours. Chemical digestion and in situ sectioning of muscle bellies along their lengths to expose fibres, fibre orientation and intramuscular tendon, are two classical methods for estimating architectural variables such as fibre length (Lf ) and physiological cross-sectional area (PCSA). It has recently been proposed that Lf estimates are systematically shorter and hence less accurate using in situ sectioning. Here we addressed this hypothesis by comparing Lf estimates between the two methods for the superficial masseter and temporalis muscles in a sample of strepsirrhine and platyrrhine primates. Means or single-specimen Lf estimates using chemical digestion were greater in 17/32 comparisons (53.13%), indicating the probability of achieving longer fibres using chemical digestion is no greater than chance in these taxonomic samples. We further explored the impact of sampling on scaling of Lf and PCSA in platyrrhines applying a bootstrapping approach. We found that sampling-both numbers of individuals within species and representation of species across the clade significantly influence scaling results of Lf and PCSA in platyrrhines. We show that intraspecific and clade sampling strategies can account for differences between previously published platyrrhine scaling studies. We suggest that differences in these two methodological approaches to assessing muscle architecture are relatively less consequential when estimating Lf and PCSA for comparative studies, whereas achieving more reliable estimates within species through larger samples and representation of the full clade space are important considerations in comparative studies of fibre architecture and scaling.

Muscle architecture and muscle fibre type composition in the forelimb of two African mole-rat species, Bathyergus suillus and Heterocephalus glaber.

The scratch-digging Cape dune mole-rat (Bathyergus suillus), and the chisel-toothed digging naked mole-rat (Heterocephalus glaber) are African mole-rats that differ in their digging strategy. The aim of this study was to determine if these behavioural differences are reflected in the muscle architecture and fibre-type composition of the forelimb muscles. Muscle architecture parameters of 39 forelimb muscles in both species were compared. Furthermore, muscle fibre type composition of 21 forelimb muscles were analysed using multiple staining protocols. In B. suillus, muscles involved with the power stroke of digging (limb retractors and scapula elevators), showed higher muscle mass percentage, force output and shortening capacity compared to those in H. glaber. Additionally, significantly higher percentages of glycolytic fibres were observed in the scapular elevators and digital flexors of B. suillus compared to H. glaber, suggesting that the forelimb muscles involved in digging in B. suillus provide fast, powerful motions for effective burrowing. In contrast, the m. sternohyoideus a head and neck flexor, had significantly more oxidative fibres in H. glaber compared to B. suillus. In addition, significantly greater physiological cross-sectional area and fascicle length values were seen in the neck flexor, m. sternocleidomastoideus, in H. glaber compared to B. suillus, which indicates a possible adaptation for chisel-tooth digging. While functional demands may play a significant role in muscle morphology, the phylogenetic differences between the two species may play an additional role which needs further study.

Ecological correlates of three-dimensional muscle architecture within the dietarily diverse Strepsirrhini.

Analysis of muscle architecture, traditionally conducted via gross dissection, has been used to evaluate adaptive relationships between anatomical form and behavioral function. However, gross dissection cannot preserve three-dimensional relationships between myological structures for analysis. To analyze such data, we employ diffusible, iodine-based contrast-enhanced computed tomography (DiceCT) to explore the relationships between feeding ecology and masticatory muscle microanatomy in eight dietarily diverse strepsirrhines: allowing, for the first time, preservation of three-dimensional fascicle orientation and tortuosity across a functional comparative sample. We find that fascicle properties derived from these digital analyses generally agree with those measured from gross-dissected conspecifics. Physiological cross-sectional area was greatest in species with mechanically challenging diets. Frugivorous taxa and the wood-gouging species all exhibit long jaw adductor fascicles, while more folivorous species show the shortest relative jaw adductor fascicle lengths. Fascicle orientation in the parasagittal plane also seems to have a clear dietary association: most folivorous taxa have masseter and temporalis muscle vectors that intersect acutely while these vectors intersect obliquely in more frugivorous species. Finally, we observed notably greater magnitudes of fascicle tortuosity, as well as greater interspecific variation in tortuosity, within the jaw adductor musculature than in the jaw abductors. While the use of a single specimen per species precludes analysis of intraspecific variation, our data highlight the diversity of microanatomical variation that exists within the strepsirrhine feeding system and suggest that muscle architectural configurations are evolutionarily labile in response to dietary ecology-an observation to be explored across larger samples in the future.

Sensitivity Analysis for Multidirectional Spaceflight Loading and Muscle Deconditioning on Astronaut Response.

A sensitivity analysis for loading conditions and muscle deconditioning on astronaut response for spaceflight transient accelerations was carried out using a mid-size male human body model with active musculature. The model was validated in spaceflight-relevant 2.5-15 g loading magnitudes in seven volunteer tests, showing good biofidelity (CORA: 0.69). Sensitivity analysis was carried out in simulations varying pulse magnitude (5, 10, and 15 g), rise time (32.5 and 120 ms), and direction (10 directions: frontal, rear, vertical, lateral, and their combination) along with muscle size change (± 15% change) and responsiveness (pre-braced, relaxed, vs. delayed response) changes across 600 simulations. Injury metrics were most sensitive to the loading direction (50%, partial-R2) and least sensitive to muscle size changes (0.2%). The pulse magnitude also had significant effect on the injury metrics (16%), whereas muscle responsiveness (3%) and pulse rise time (2%) had only slight effects. Frontal and upward loading directions were the worst for neck, spine, and lower extremity injury metrics, whereas rear and downward directions were the worst for head injury metrics. Higher magnitude pulses and pre-bracing also increased the injury risk.

Effects of long-term ethanol storage on muscle architecture.

Muscle excursion and force potential can be estimated from architectural variables, including mass, volume, fascicle length, and density. These have been collected from fresh specimens, preserved specimens, and sometimes mixed samples of both. However, preservation alters the gross morphology of muscles. This study aims to quantify the effects of long-term storage on myological properties across a sample of fresh and ethanol preserved Mus musculus specimens ranging in storage time from 16 to 130 years. Masses, volumes, and densities of biceps femoris, quadriceps femoris, and triceps surae were measured, and histological cross-sections of some specimens were used to evaluate the microscale effects of long-term fluid preservation. For the remainder of the sample, chemically dissected fascicle lengths were measured to evaluate the fixation effects on the linear dimensions of muscle architecture. Relative muscle mass, volume, fascicle length, average fiber area, and density, and percent fiber area were regressed against years stored in ethanol. Muscle size dropped steeply between fresh and stored samples, ultimately decreasing by 62 and 60%, respectively. These losses correlate with histologically measured shrinking of average muscle fiber area. Density of stored specimens plateaued 5% below that of fresh ones. Although muscles lost mass and volume during ethanol storage, fascicle lengths did not shorten significantly (presumably because they were preserved attached on either end to bone). This study demonstrates that muscle mass, volume, and density of specimens stored long-term in ethanol should be corrected by factors of 2.64, 2.49, and 1.054 respectively for comparability to fresh specimens.

Masticatory muscle architectural correlates of dietary diversity in Canidae, Ursidae, and across the order Carnivora.

Carnivorans represent extreme ecomorphological diversity, encompassing remarkable variation in form, habitat, and diet. The relationship between the masticatory musculature and dietary ecology has been explored in a number of carnivoran lineages, including felids and the superfamily Musteloidea. In this study, we present novel architectural data on two additional carnivoran families-Ursidae and Canidae-and supplement these previous studies with additional felid, musteloid, herpestid, hyaenid, and viverrid taxa (a total of 53 species across 10 families). Gross dissection data were collected following a standardized protocol-sharp dissection followed by chemical digestion. Summed jaw adductor forces were also transformed into bite force estimates (BF) using osteologically calculated leverages. All data were linearized, log-transformed, and size-adjusted using two proxies for each taxon-body mass (BM) and cranial geometric mean-to assess relative scaling trends. These architectural data were then analyzed in the context of dietary ecology to examine the impact of dietary size (DS) and dietary mechanical properties (DMP). Muscle mass, physiological cross-sectional area, and BF scaled with isometry or positive allometry in all cases, whereas fascicle lengths (FLs) scaled with isometry or negative allometry. With respect to diet, BM-adjusted FLs were strongly correlated with DS in musteloids, but not in any other lineage. The relationship between size-adjusted BF and DMP was also significant within musteloids, and across the sample as a whole, but not within other individual lineages. This interfamilial trend may reflect the increased morphological and dietary diversity of musteloids relative to other carnivoran groups.

Evaluating bony predictors of bite force across the order Carnivora.

In carnivorans, bite force is a critical and ecologically informative variable that has been correlated with multiple morphological, behavioral, and environmental attributes. Whereas in vivo measures of biting performance are difficult to obtain in many taxa-and impossible in extinct species-numerous osteological proxies exist for estimating masticatory muscle size and force. These proxies include both volumetric approximations of muscle dimensions and direct measurements of muscular attachment sites. In this study, we compare three cranial osteological techniques for estimating muscle size (including 2D-photographic and 3D-surface data approaches) against dissection-derived muscle weights and physiological cross-sectional area (PCSA) within the jaw adductor musculature of 40 carnivoran taxa spanning eight families, four orders of magnitude in body size, and the full dietary spectrum of the order. Our results indicate that 3D-approaches provide more accurate estimates of muscle size than do surfaces measured from 2D-lateral photographs. However, estimates of a muscle's maximum cross-sectional area are more closely correlated with muscle mass and PCSA than any estimates derived from muscle attachment areas. These findings highlight the importance of accounting for muscle thickness in osteological estimations of the masticatory musculature; as muscles become volumetrically larger, their larger cross-sectional area does not appear to be associated with a proportional increase in the attachment site area. Though volumetric approaches approximate muscle dimensions well across the order as a whole, caution should be exercised when applying any single method as a predictor across diverse phylogenies.

DiceCT Analysis of the Extreme Gouging Adaptations Within the Masticatory Apparatus of the Aye-Aye (Daubentonia madagascariensis).

Relative to all other primates, the aye-aye (Daubentonia madagascariensis) exists at the extremes of both morphology and behavior. Its specialized anatomy-which includes hypselodont incisors and highly derived manual digits-reflects a dietary niche, unique among primates, which combines tap-foraging with gouging to locate and extract wood-boring larvae. Here, we explore the impact of this extreme dietary ecology upon the masticatory musculature of this taxon with reference to a second, similarly sized but highly generalist lemuriform-the mongoose lemur (Eulemur mongoz). Using non-destructive, high-resolution diffusible iodine-based contrast-enhanced computed tomography techniques, we reconstruct the three-dimensional volumes of eight masticatory muscles, and, for the first time in strepsirrhines, isolate and visualize their constituent muscle fascicles in situ and in three dimensions. Using these data, we report muscle volumes, forces, and fascicle lengths from each muscle portion, as well as their orientation relative to two standardized anatomical planes. Our findings demonstrate the overbuilt nature of the aye-aye's masticatory apparatus, in which each muscle possesses an absolutely and relatively larger muscle volume and PCSA than its counterpart in the mongoose lemur. Likewise, for several adductor muscles, aye-ayes also possess relatively greater fascicle lengths. Finally, we note several unusual features within the lateral pterygoid of the aye-aye-the muscle most responsible for jaw protrusion-that relate to force maximization and reorientation. As this jaw motion is critical to gouging, we interpret these differences to reflect highly specific specializations that facilitate the aye-aye's extreme subsistence strategy. Anat Rec, 2019. © 2019 American Association for Anatomy Anat Rec, 303:282-294, 2020. © 2019 American Association for Anatomy.

The Forearm Musculature of the Gray Mouse Lemur (Microcebus murinus): An Ontogenetic Study.

Although studies have sought to characterize variation in forearm muscular anatomy across the primate order, none have attempted to quantify ontogenetic changes in forearm myology within a single taxon. Herein, we present muscle architecture data for the forearm musculature (flexors and extensors of the wrist and digits) of Microcebus murinus, a small Lemuroid that has been the focus of several developmental studies. A quadratic curvilinear model described ontogenetic changes in muscle mass and fascicle length; however, fascicle lengths reached peak levels at an earlier age and showed a stronger decline during senescence. Conversely, physiological cross-sectional area followed a more linear trend, increasing steadily throughout life. As previous studies into the functional role of the primate forelimb emphasize the importance of long muscle fascicles within arboreal taxa in order to maximize mobility and flexibility, the early attainment of peak fascicle lengths may consequently reflect the importance of agility within this mobile and highly arboreal species. Similarly, observed myological trends in forearm strength are supported by previous in vivo data on grip strength within M. murinus in which senescent individuals showed no decline in forearm force relative to prime age individuals. This trend is interpreted to reflect compensation for the previously reported decline in hind limb grip strength in the hind limb with age, such that older individuals are able to maintain arboreal stability. Interestingly, the ontogenetic trajectory of each architectural variable mirrored previous observations of the masticatory musculature in M. murinus, suggesting that ontogenetic trends are relatively conserved between anatomical regions. Anat Rec, 303:1354-1363, 2020. © 2019 American Association for Anatomy.

Bite Force and Masticatory Muscle Architecture Adaptations in the Dietarily Diverse Musteloidea (Carnivora).

Dietary ecology and its relationship with both muscle architecture and bite force potential has been studied in many mammalian (and non-mammalian) taxa. However, despite the diversity of dietary niches that characterizes the superfamily Musteloidea, the masticatory muscle fiber architecture of its members has yet to be investigated anatomically. In this study, we present myological data from the jaw adductors in combination with biomechanical data derived from craniomandibular measurements for 17 species representing all four families (Ailuridae, Mephitidae, Mustelidae, and Procyonidae) of Musteloid. These data are combined to calculate bite force potential at each of three bite points along the dental row. Across our sample as a whole, masticatory muscle mass scaled with isometry or slight positive allometry against both body mass and skull size (measured via a cranial geometric mean). Total jaw adductor physiological cross-sectional area scaled with positive allometry against both body mass and skull size, while weighted fiber length scaled with negative allometry. From a dietary perspective, fiber length is strongly correlated with dietary size such that taxa that exploit larger foods demonstrated myological adaptations toward gape maximization. However, no consistent relationship between bite force potential and dietary mechanical resistance was observed. These trends confirm previous findings observed within the carnivoran family Felidae (as well as within primates), suggesting that the mechanisms by which masticatory anatomy adapts to dietary ecology may be more universally consistent than previously recognized. Anat Rec, 302:2287-2299, 2019. © 2019 American Association for Anatomy.

Mechanical similarity across ontogeny of digging muscles in an Australian marsupial (Isoodon fusciventer).

Many mammals dig, either during foraging to access subsurface food resources, or in creating burrows for shelter. Digging requires large forces produced by muscles and transmitted to the soil via the skeletal system; thus fossorial mammals tend to have characteristic modifications of the musculoskeletal system that reflect their digging ability. Bandicoots (Marsupialia: Peramelidae) scratch-dig mainly to source food, searching for subterranean food items including invertebrates, seeds, and fungi. They have musculoskeletal features for digging, including shortened, robust forelimb bones, large muscles, and enlarged muscle attachment areas. Here, we compared changes in the ontogenetic development of muscles associated with digging in the Quenda (Isoodon fusciventer). We measured muscle mass (m m ), pennation angle, and fiber length (FL) to calculate physiological cross-sectional area (PCSA; a proxy of maximum isometric force) as well as estimate the maximum isometric force (Fmax) for 34 individuals ranging in body size from 124 to 2,390 g. Males grow larger than females in this bandicoot species, however, we found negligible sex differences in mass-specific m m , PCSA or FL for our sample. Majority of the forelimb muscles PCSA showed a positive allometric relationship with total body mass, while m m and FL in the majority of forelimb muscles showed isometry. Mechanical similarity was tested, and two thirds of forelimb muscles maximum isometric forces (Fmax) scaled with isometry; therefore the forelimb is primarily mechanical similar throughout ontogeny. PCSA showed a significant difference between scaling slopes between main movers in the power stroke, and main movers of the recovery stroke of scratch-digging. This suggests that some forelimb muscles grow with positive allometry, specially these associated with the power stroke of digging. Intraspecific variation in PCSA is rarely considered in the literature, and thus this is an important study quantifying changes in muscle architectural properties with growth in a mammalian model of scratch-digging.