RESUMO
In this work, recycled poly(ethylene terephthalate) (PETR) was blended with virgin high-density polyethylene (HDPE) in an internal mixer in an attempt to obtain a material with improved properties. A compatibilizer (PE-g-MA) and a chain extender (Joncryl) were added to the PETR/HDPE blend and the rheological and thermal properties of the modified and unmodified blends as well as those of virgin PET with virgin HDPE (PETV/HDPE). All the blends were characterized by torque rheometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The data obtained indicate that the incorporation of either the chain extender or the compatibilizer agent led to increases in torque (and hence in viscosity) of the blend compared to that of the neat polymers. The joint incorporation of the chain extender and compatibilizer further increased the viscosity of the systems. Their effect on the crystallinity parameters of HDPE was minimal, but they reduced the crystallinity and crystallization temperature of virgin and recycled PET in the blends. The thermal stability of the PETR/HDPE blend was similar to that of the PETV/HDPE blend, and it was not affected by the incorporation of the chain extender and/or compatibilizer.
RESUMO
In this work, composites of high density polyethylene (HDPE) with chitosan were prepared by melt compounding in a laboratory internal mixer. Maleic anhydride grafted HDPE (PE-g-MA) in a concentration up to 25 phr was used as a compatibilizer to enhance the dispersing effect of chitosan in the HDPE matrix. The degree of crystallinity was investigated by X-ray diffraction (XRD) and the thermal properties were analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG). The morphology was investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The integrity of composites was evaluated by mechanical properties and antibacterial properties were assessed against Escherichia coli (DH5a). Neither crystallinity nor HDPE's melting parameters changed upon addition of chitosan and PE-g-MA. Chitosan aggregates were observed, which were dispersed upon addition of PE-g-MA, which also provided improved mechanical performance. Chitosan significantly improved the bacteriostatic effect of HDPE compounds preventing bacteria to colonize thus reducing the number of viable colony-forming units (CFU). This study revealed that HDPE/chitosan composites could be obtained by melt compounding, at lower cost and additionally having antibacterial properties, which might provide a new formulation option for developing antimicrobial film for food packaging.