Combined Non-invasive PIXE/PIGE Analyses of Mammoth Ivory from Aurignacian Archaeological Sites.

Among the earliest Homo sapiens societies in Eurasia, the Aurignacian phase of the Early Upper Paleolithic, approximately 40 000-30 000 years ago, mammoth ivory assumed great social and economic significance, and was used to create hundreds of personal ornaments as well as the earliest known works of three-dimensional figurative art in the world. This paper reports on the results of micro-PIXE/PIGE analyses of mammoth-ivory artifacts and debris from five major sites of Aurignacian ivory use. Patterns of variable fluorine content indicate regionally distinctive strategies of ivory procurement that correspond to apparent differences in human-mammoth interactions. Preserved trace elements (Br, Sr, Zn) indicate that differences at the regional level are applicable to sourcing Paleolithic ivory at the regional scale.

Analyzing the anti-caries effect of fluoride varnish containing tricalcium phosphate using PIXE/PIGE.

This study evaluated the effect of tricalcium phosphate-containing fluoride varnish on the prevention of root caries using an in-air micro-proton induced X-ray/gamma-ray emission system and microcomputed tomography. Either fluoride varnish (FV) or tricalcium phosphate-containing fluoride varnish (WV) was applied to root dentin, whereas dentin without varnish were considered controls. After immersion in saline, dentin sections were prepared, and concentration of fluoride ion was measured. These specimens were demineralized, and the mineral loss was measured. Caries inhibition in sound and demineralized dentin was observed in both FV and WV groups compared to the control group. Significantly low mineral loss was found especially in the demineralized dentin, which is probably due to the combination effect of calcium and fluoride ions at a concentration range of 100,000 ppm, as supplied by the varnish. The use of calcium-containing fluoride varnish, especially in demineralized dentin, is effective in arresting initial dentin caries.

Fluoride Retention in Root Dentin following Surface Coating Material Application.

This study aimed to use an in-air micro-particle-induced X-ray/gamma emission (in-air µPIXE/PIGE) system to evaluate tooth-bound fluoride (T-F) in dentin following the application of fluoride-containing tooth-coating materials. Three fluoride-containing coating materials (PRG Barrier Coat, Clinpro XT varnish, and Fuji IX EXTRA) and a control were applied to the root dentin surface of human molars (n = 6, total 48 samples). Samples were stored in a remineralizing solution (pH 7.0) for 7 or 28 days and then sectioned into two adjacent slices. One slice of each sample was immersed in 1M potassium hydroxide (KOH) solution for 24 h and rinsed with water for 5 min for the T-F analysis. The other slice did not undergo KOH treatment and was used to analyze the total fluoride content (W-F). The fluoride and calcium distributions were measured in all the slices using an in-air µPIXE/PIGE. Additionally, the amount of fluoride released from each material was measured. Clinpro XT varnish demonstrated the highest fluoride release among all the materials and tended to show high W-F and T-F and lower T-F/W-F ratios. Our study demonstrates that a high fluoride-releasing material shows high fluoride distribution into the tooth structure and low conversion from fluoride uptake by tooth-bound fluoride.

Inhibition of Demineralization of Dentin by Fluoride-Containing Hydrogel Desensitizers: An In Vitro Study.

Several desensitizers routinely used clinically for dentin hypersensitivity are expected to inhibit demineralization. This study aimed to evaluate the effectiveness of sealing materials in inhibiting demineralization and increasing fluorine (F) uptake by acid-treated root surfaces. Five noncarious extracted human teeth were used to produce specimens. Three different fluoride-containing materials, namely "MS Coat F" (MS), "MS Coat Hys Block Gel" (HS), and CTX2 Varnish (FV), were used herein. Each material was applied to the demineralized root surface. Single sections were obtained from each specimen. All surfaces of each specimen, except the polished surface, were covered with wax and immersed in an automatic pH cycling system for 2 weeks. Fluorine and calcium distributions in the carious lesions of each specimen were evaluated using proton-induced gamma emission (PIGE) and X-ray (PIXE) techniques, respectively. Dentin demineralization was analyzed using transverse microradiography (TMR) before and after pH cycling. µPIXE/PIGE analysis demonstrated that all sample groups showed increased fluoride uptake on the root surface. TMR analysis revealed that both HS and FV showed significantly lower integrated mineral loss values than the control group. All three samples demonstrated a tendency towards increased fluoride uptake from fluoride-containing hypersensitivity desensitizers and a demineralization inhibition effect on root dentin.

Archaeometric Characterization of the Industrial Production of Porcelains in the Vieillard & Co. Manufactory (Bordeaux, France, 19th Century).

In this paper, we focus on the industrial production of porcelain in the Bordeaux area (France) in the 19th century. Our main objective is to assess the evolution of production technology of the same manufactory over a period of more than 40 years. A multi-analytical approach was used to investigate glazes and bodies of thirty-four sherds of biscuit and porcelain found in an archaeological context. The microstructural, chemical, and mineralogical characterization was performed using a combination of scanning electron microscopy, coupled with energy dispersive spectroscopy (SEM-EDS), particles induced X-ray and gamma emission (PIXE-PIGE), and X-ray diffraction (XRD). Results obtained on the characterization of the ceramic production technologies and on the chemical modification over time contributes to investigate this industrial production, which is not well documented by the written archives. The examination of the biscuits, rare artifacts, showed that the porcelain bodies were produced by mixing kaolinitic clays, quartz, and potassium feldspars. The mineralogical analysis of the ceramic supports allowed hypotheses to be put forward on the temperatures of the biscuit firing (around 950 °C) and the second firing (over 1200 °C). Furthermore, the treatment of the compositional data, including both glazes and bodies, using multivariate statistical analysis, revealed different types of production corresponding to the different chronological periods of production at Bordeaux throughout the 19th century. These results will enable us to consider the possibility of authenticating non-stamped and undecorated pieces.

In-air micro-proton-induced X-ray/gamma-ray emission analysis of the acid resistance of root dentin after applying fluoride-containing materials incorporating calcium.

This study employed an in-air micro-proton-induced X-ray/gamma-ray emission system to assess the effectiveness of fluoride-containing materials (FCMs) incorporating calcium in preventing root caries. Dentin surfaces of human third molars were coated with one of three FCMs: fluoride-releasing glass-ionomer cement (F7) and experimental materials in which half (P1) or all (P2) of the strontium in F7 was replaced with calcium. Dentin without FCM coating served as the control. Specimens were immersed in saline at 37°C for 1 month, sectioned, and then demineralized. Calcium loss after demineralization was lower in the Ca-substituted groups than in the Ca-unsubstituted groups (p<0.05). Calcium loss was negatively correlated with fluoride uptake (p<0.01). In the F7, P1, and P2 groups, the retraction of the dentin surface was significantly suppressed as compared with the control group. FCMs incorporating calcium improved the acid resistance of root dentin and could help prevent root caries.

Distribution of elements in teeth and inhibition of demineralization by titanium fluoride: Effects of concentration and pH in a titanium fluoride solution.

The purpose of this study was to assess the effects of titanium fluoride (TiF4) concentration and pH on fluoride distribution and demineralization of root dentin surfaces. Concentrations of 0.1%, 1%, and 2% TiF4 (pH 1), 1% TiF4 solution adjusted to pH 4, 5, 6, and 1.35% sodium fluoride (NaF) solution were applied to root dentin surfaces. Each specimen was subjected to pH cycling (pH: 4.5-7.0) for 4 weeks. Lesion depth and calcium, fluorine, and titanium distribution were then evaluated. Our limited study indicates that lesion depth and fluorine and titanium distribution in dentin depend on the concentration of a TiF4 solution. We also found that a 1% TiF4 solution adjusted to a pH 4-6 can reduce demineralization as effectively as a similar concentration of NaF.

Morphological and elemental analysis of silver penetration into sound/demineralized dentin after SDF application.

OBJECTIVE: The aim of this study was to evaluate the penetration depth of silver into sound and demineralized dentin after application of silver diamine fluoride (SDF). METHODS: Two hundred and eighty-eight dentin specimens were used. The specimens were divided into 3 groups: (1) sound dentin (control), (2) 30min EDTA-treated dentin; and (3) 13h EDTA-treated dentin. SDF was applied to all specimens. Each group was divided into 3 subgroups according to storage time into: 24h, 2 weeks and 1-year storage time. Each subgroup was further divided into four subgroups (n=8) according to different examinations as optical microscope (OM) observation, scanning electron microscopic (SEM) observation, elemental analysis with energy dispersive spectroscopy (EDS) and Micro-PIXE test. RESULTS: The OM showed discoloration in the superficial layer after 24h and keep extending deeper after 2 weeks and 1-year. SEM showed silver crystals within dentinal tubules after 2 weeks and 1-year. EDS analysis can detect silver penetration only in the 1-year group reaching around 1200µm inside dentin. Micro-PIXE test detected silver at all time intervals, confirming the EDS depth results. SIGNIFICANCE: It can be concluded that silver ions can completely infiltrate the demineralized dentin lesion with further penetration into the underlying mineralized dentin.