RESUMO
This study aimed to assess the antiprotozoal efficacy of dicentrine, an aporphine alkaloid isolated from Ocotea puberula, against amastigote forms of Leishmania (L.) infantum. Our findings reveal that dicentrine demonstrated a notable EC50 value of 10.3 µM, comparable to the positive control miltefosine (EC50 of 10.4 µM), while maintaining moderate toxicity to macrophages (CC50 of 51.9 µM). Utilizing an in silico methodology, dicentrine exhibited commendable adherence to various parameters, encompassing lipophilicity, water solubility, molecule size, polarity, and flexibility. Subsequently, we conducted additional investigations to unravel the mechanism of action, employing Langmuir monolayers as models for protozoan cell membranes. Tensiometry analyses unveiled that dicentrine disrupts the thermodynamic and mechanical properties of the monolayer by expanding it to higher areas and increasing the fluidity of the film. The molecular disorder was further corroborated through dilatational rheology and infrared spectroscopy. These results contribute insights into the role of dicentrine as a potential antiprotozoal drug in its interactions with cellular membranes. Beyond elucidating the mechanism of action at the plasma membrane's external surface, our study sheds light on drug-lipid interface interactions, offering implications for drug delivery and other pharmaceutical applications.
Assuntos
Antiprotozoários , Antiprotozoários/farmacologia , Antiprotozoários/química , Relação Estrutura-Atividade , Membrana Celular/efeitos dos fármacos , Aporfinas/farmacologia , Aporfinas/química , Relação Dose-Resposta a Droga , Lauraceae/química , Estrutura Molecular , Leishmania infantum/efeitos dos fármacos , Testes de Sensibilidade Parasitária , AnimaisRESUMO
Hormone treatments are frequently associated with cardiovascular diseases and cancers in women. Additionally, the detrimental effects of their presence as contaminants in water remain a concern. The transport of hormones through cell membranes is essential for their biological action, but investigating cell permeability is challenging owing to the experimental difficulty in dealing with whole cells. In this paper, we study the interaction of the synthetic hormone 17α-ethynylestradiol (EE2) with membrane models containing the key raft components sphingomyelin (SM) and cholesterol (Chol). The models consisted of Langmuir monolayers and giant unilamellar vesicles (GUVs) that represent bilayers. EE2 induced expansion of SM monolayers upon interacting with the non-hydrated amide group of SM head, but it had practically no effect on SM GUVs because these group are not available for interaction in bilayers. In contrast, EE2 interacted with hydrated phosphate group (PO2-) and amide group of SM/Chol mixture monolayer, which could explain the loss in phase contrast of liquid-ordered GUVs suggesting pore formation. A comparison with reported EE2 effects on GUVs in the fluid phase, for which no loss in phase contrast was observed, indicates that the liquid-ordered phase consisting of lipid rafts is relevant to be associated with the changes on cell permeability caused by the hormones.
Assuntos
Esfingomielinas , Lipossomas Unilamelares , Feminino , Humanos , Esfingomielinas/metabolismo , Hormônios , Colesterol , Microdomínios da Membrana/metabolismo , AmidasRESUMO
Mesoporous silica impregnated with polyethyleneimine (PEI) has been shown to be a suitable material for the direct air capture (DAC) of CO2. Factors such as CO2 concentration, temperature, and amine loading impact overall capture capacity and amine efficiency by altering diffusional resistance and reaction kinetics. When studied in the impregnated 3-dimensional sorbent material, internal diffusion impacts the evaluation of the reaction kinetics at the air/amine interface. In this work, we designed a novel tandem quartz crystal microbalance with dissipation (QCM-D) and polarization modulation infrared reflective absorption spectroscopy (PM-IRRAS) instrument. CO2 adsorption kinetics of the PEI-based amine layer in a 2-dimensional geometry were studied at a variety of film thicknesses (10 nm to 100 nm), temperatures (25 °C to 80 °C), and CO2 concentrations (5 % and 0.04 % by mole fraction). Total CO2 capture capacity increased with film thickness but decreased amine efficiency, as additional diffusional resistance for thicker films limits access to available amine sites. The capture capacity of thick films (>50 nm) is shown to be limited by amine availability, while capture of thin films (<50 nm) is limited by CO2 availability. A 50 nm PEI film was shown to be optimal for capture of 0.04 % (400 ppm) CO2. The adsorption profiles for these conditions were fitted to pseudo-first order and Avrami fractional order models. The reaction process switches between a diffusion limited reaction to a kinetic limited reaction at 80 °C when using 5 % CO2 and 55 °C when using 0.04 % CO2. These results offer accurate analysis of adsorption of CO2 at the air/amine interface of PEI films which can be used for the design of future sorbent materials.
RESUMO
Multiprotein adsorption from complex body fluids represents a highly important and complicated phenomenon in medicine. In this work, multiprotein adsorption from diluted human serum at gold and oxidized iron surfaces is investigated at different serum concentrations and pH values. Adsorption-induced changes in surface topography and the total amount of adsorbed proteins are quantified by atomic force microscopy (AFM) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRRAS), respectively. For both surfaces, stronger protein adsorption is observed at pH 6 compared to pH 7 and pH 8. PM-IRRAS furthermore provides some qualitative insights into the pH-dependent alterations in the composition of the adsorbed multiprotein films. Changes in the amide II/amide I band area ratio and in particular side-chain IR absorption suggest that the increased adsorption at pH 6 is accompanied by a change in protein film composition. Presumably, this is mostly driven by the adsorption of human serum albumin, which at pH 6 adsorbs more readily and thereby replaces other proteins with lower surface affinities in the resulting multiprotein film.
Assuntos
Amidas , Ouro , Humanos , Adsorção , Microscopia de Força Atômica , Espectrofotometria Infravermelho , FerroRESUMO
Ladder polymers with poly(diketopyrrolopyrrole) (DPP) moieties have recently attracted enormous interest for a large variety of opto-electronic applications. Since the rigidity of the backbone increases with ladderization, a strong influence on the self-organization of thin films is expected. We study the molecular orientation of DPP-based ladder polymers in about 50 nm thin films using polarization modulation-infrared reflection-absorption spectroscopy (PM-IRRAS). Exemplarily, for one polymer, the orientation in thicker films is qualitatively investigated by infrared spectroscopy in transmission. Further, this method allows us to rule out the effects of a possible azimuthal ordering, which would affect the analysis of the orientation by PM-IRRAS. For all polymers, the long axis of the polymer backbone is preferentially oriented parallel to the substrate surface, pointing to a high degree of ordering. It is suggested that the choice of the side chains might be a promising way to tune for face-on and edge-on orientations. The exemplarily performed investigation of interface properties on substrates with different work functions suggests that the choice of the side chains has a minor effect on the interfacial electronic interface structure.
RESUMO
(1) Background: Membrane lipids have been disregarded in drug development throughout the years. Recently, they gained attention in drug design as targets, but they are still disregarded in the latter stages. Thus, this study aims to highlight the relevance of considering membrane lipids in the preclinical phase of drug development. (2) Methods: The interactions of a drug candidate for clinical use (licofelone) with a membrane model system made of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were evaluated by combining Langmuir isotherms, Brewster angle microscopy (BAM), polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and grazing-incidence X-ray diffraction (GIXD) measurements. (3) Results: Licofelone caused the expansion of the DPPC isotherm without changing the lipid phase transition profile. Moreover, licofelone induced the reduction of DPPC packing density, while increasing the local order of the DPPC acyl chains. (4) Conclusions: The licofelone-induced alterations in the structural organization of phosphatidylcholine monolayers may be related to its pharmacological actions. Thus, the combination of studying drug-membrane interactions with the pharmacological characterization that occurs in the preclinical stage may gather additional information about the mechanisms of action and toxicity of drug candidates. Ultimately, the addition of this innovative step shall improve the success rate of drug development.
Assuntos
1,2-Dipalmitoilfosfatidilcolina/química , Pirróis/química , Desenvolvimento de Medicamentos , Lipídeos de Membrana/química , Microscopia , Estrutura Molecular , Análise Espectral , TemperaturaRESUMO
The biomembrane surrounding rubber particles from the hevea latex is well known for its content of numerous allergen proteins. HbREF (Hevb1) and HbSRPP (Hevb3) are major components, linked on rubber particles, and they have been shown to be involved in rubber synthesis or quality (mass regulation), but their exact function is still to be determined. In this study we highlighted the different modes of interactions of both recombinant proteins with various membrane models (lipid monolayers, liposomes or supported bilayers, and multilamellar vesicles) to mimic the latex particle membrane. We combined various biophysical methods (polarization-modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS)/ellipsometry, attenuated-total reflectance Fourier-transform infrared (ATR-FTIR), solid-state nuclear magnetic resonance (NMR), plasmon waveguide resonance (PWR), fluorescence spectroscopy) to elucidate their interactions. Small rubber particle protein (SRPP) shows less affinity than rubber elongation factor (REF) for the membranes but displays a kind of "covering" effect on the lipid headgroups without disturbing the membrane integrity. Its structure is conserved in the presence of lipids. Contrarily, REF demonstrates higher membrane affinity with changes in its aggregation properties, the amyloid nature of REF, which we previously reported, is not favored in the presence of lipids. REF binds and inserts into membranes. The membrane integrity is highly perturbed, and we suspect that REF is even able to remove lipids from the membrane leading to the formation of mixed micelles. These two homologous proteins show affinity to all membrane models tested but neatly differ in their interacting features. This could imply differential roles on the surface of rubber particles.
Assuntos
Antígenos de Plantas/química , Bicamadas Lipídicas/química , Lipossomos/química , Proteínas de Plantas/química , Borracha/química , Alérgenos/química , Hevea/química , Látex/química , Espectroscopia de Ressonância Magnética , Proteínas Recombinantes/química , Espectroscopia de Infravermelho com Transformada de Fourier , Ressonância de Plasmônio de SuperfícieRESUMO
HbREF and HbSRPP are two Hevea brasiliensis proteins present on rubber particles, and probably involved in the coagulation of latex. Their function is unclear, but we previously discovered that REF had amyloid properties, which could be of particular interest during the coagulation process. First, we confirmed that REF and SRPP, homologous and principal proteins in hevea latex, are not glycoproteins. In this work, we investigated various aspects of protein interactions: aggregation, auto-assembling, yeast and erythrocyte agglutination, co-interactions by various biochemical (PAGE, spectroscopy, microscopy), biophysical (DLS, ellipsometry) and structural (TEM, ATR-FTIR, PM-IRRAS) approaches. We demonstrated that both proteins are auto-assembling into different aggregative states: REF polymerizes as an amyloid rich in ß-sheets and forms quickly large aggregates (>µm), whereas SRPP auto-assembles in solution into stable nanomultimers of a more globular nature. Both proteins are however able to interact together, and SRPP may inhibit the amyloidogenesis of REF. REF is also able to interact with the membranes of yeasts and erythrocytes, leading to their agglutination. In addition, we also showed that both REF and SRPP did not have antimicrobial activity, whereas their activity on membranes has been clearly evidenced. We may suspect that these aggregative properties, even though they are clearly different, may occur during coagulation, when the membrane is destabilized. The interaction of proteins with membranes could help in the colloidal stability of latex, whereas the protein-protein interactions would contribute to the coagulation process, by bringing rubber particles together or eventually disrupting the particle monomembranes.
Assuntos
Antígenos de Plantas/química , Antígenos de Plantas/metabolismo , Hevea/metabolismo , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Multimerização Proteica , Aglutinação/genética , Sequência de Aminoácidos , Amiloide/genética , Amiloide/metabolismo , Antígenos de Plantas/genética , Dados de Sequência Molecular , Filogenia , Proteínas de Plantas/genética , Ligação Proteica , Estrutura Terciária de Proteína , Homologia de Sequência de AminoácidosRESUMO
This study investigates polyethylene glycol (PEG) homopolymer thin film adsorption on gold surfaces of controlled surface chemistry. The conformational states of physisorbed PEG are analyzed through polarization modulation infrared reflection-absorption spectrometry (PM-IRRAS). The PM-IRRAS principle is based on specific optical selection rules allowing the detection of surface-specific FTIR response of thin polymer films on the basis of differential reflectivity at the polymer/substrate interface for p- and s-polarized light. The intensification of the electric field generated at the PEG/substrate interface for p-polarized IR light in comparison with s-polarized light permits the analysis of PEG chain anisotropy and conformational changes induced by the adsorption. Results showed that PEG adsorbs on model substrates having a rather hydrophilic character in a way that the PEG chains spread parallel to the surface. In the case of a very hydrophilic substrate, the adsorbed PEG chains are in a stable thermodynamic state which allows them to arrange and crystallize as stacked crystalline lamellae after adsorption. The surface topography and morphology of the PEG thin films were also investigated by atomic force microscopy (AFM). While in the bulk state, PEG crystallizes in the form of large spherulites; on substrates whose adsorption is favored by surface chemistry, PEG crystallizes in the form of stacked lamellae with a thickness equal to 20 nm. Conversely, on a hydrophobic substrate, the PEG chains do not crystallize and adsorption occurs in the statistical coil state.
RESUMO
Formamidinium lead iodide-based solar cells show promising device reliability. The grain imperfection can be further suppressed by developing powder methodology. The water uptake capability is critical for the stability of α-formamidinium lead triiodide (FAPbI3) thin films, and elucidating the migration of hydrogen species is challenging using routine techniques such as imaging or mass spectroscopy. Here, we decipher the proton diffusion to quantify indirect monitoring of H migration by following the N-D vibration using transmission infrared spectroscopy. The technique allows a direct assessment of the perovskite degradation associated with moisture. The inclusion of Cs in FAPbI3, reveals significant differences in proton diffusion rates, attesting to its impact. CsFAPbI3's ability to block the active layer access by water molecules is five times higher than α-FAPbI3, which is significantly higher than methylammonium lead triiodide (MAPbI3). Our protocol directly probes the local environment of the material to identify its intrinsic degradation mechanisms and stability, a key requirement for optoelectronic applications.
RESUMO
The interaction of Dengue fusion peptide (FLAg) in selected lipid Langmuir monolayers was characterized with surface pressure-area isotherms and infrared spectroscopy to investigate the role of the membrane charge and molecular organization in the peptide-lipid binding. Surface pressure-area isotherms were employed to analyze the thermodynamic and mechanical properties of the FLAg-lipid monolayer, showing that charged lipid monolayers showed different peptide adsorption patterns for an optimized peptide concentration (maximum membrane adsorption). Polarization modulation infrared reflection-absorption spectroscopy pointed out that incorporating FLAg changed the dipole orientations for the lipid polar head groups, as confirmed in PG-containing monolayers. Also, FLAg reorients the lipid film when it interacts with the phosphate and choline groups. Finally, analysis of the 310-helix bands suggests that FLAg assumes a configuration as a hairpin, an essential premise for the beginning of the membrane fusion process.
Assuntos
Dengue , Fosfolipídeos , Humanos , Peptídeos , Fosfolipídeos/química , Espectrofotometria Infravermelho , Propriedades de Superfície , Água/químicaRESUMO
Adsorption of methanol and ethanol on the clean Pt (111) surface was studied at temperatures between 80 and 130 K using polarization-modulation infrared reflection absorption spectroscopy (PM-IRRAS). It was shown that adsorption of methanol at 80 K leads to the formation of amorphous solid methanol, and fast crystallization of the amorphous phase occurs upon warming at 100 K. Vapor deposition of methanol at 100 K directly leads to the formation of well-crystallized layers of solid methanol. According to PM-IRRAS, these crystalline layers consist of chains of hydrogen-bonded methanol molecules lying in a plane oriented close to the normal to the platinum surface. Adsorbed methanol is removed completely from platinum after heating to 120 K. Vapor deposition of ethanol at 80 K also leads to the formation of amorphous solid ethanol. However, subsequent warming does not lead to ordering of the adsorption layers, and at 130 K, ethanol is also completely desorbed.
RESUMO
Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.
Assuntos
Lipídeos , Proteínas , Membrana Celular/química , Bicamadas Lipídicas/química , Lipídeos/análise , Membranas Artificiais , Microscopia de Força Atômica/métodos , Estrutura Molecular , Proteínas/metabolismoRESUMO
Gold nanoparticles have been intensively studied in cancer therapy to improve drug release, increasing therapeutic action and reducing adverse effects. The interaction between gold nanoparticles and cell membranes can give information about the cell internalization. In this study, gold nanoparticles with aminolevulinic acid (5-ALA) were synthesized using the photoreduction method (5-ALA: AuNPs). The prodrug 5-ALA is responsible for protoporphyrin IX synthesis inside the cell and allows the use of therapies as photodynamic and sonodynamic therapies. The cytotoxicity test was performed on a breast cancer tumor line (MCF-7), and high Content Screening assay was applied to evaluate the entry of nanoparticles into cells. DPPS Langmuir monolayers were assembled at the air/water interface and employed as a simplified membrane model for half of a tumorigenic cell membrane. We assessed the molecular interactions between 5-ALA: AuNPs and phospholipids using tensiometry (π-A isotherms) and vibrational spectroscopy (PM-IRRAS) experiments. We found that the functionalized gold nanoparticles strongly interact with DPPS polar head groups (especially phosphate and carbonyl), changing the phospholipid hydration and leading to a general decrease in the monolayer conformational order. This work then probes that specific interaction between 5-ALA: AuNPs and the negatively charged phospholipid can be assessed using Langmuir monolayers as simplified biomembrane models.
Assuntos
Nanopartículas Metálicas , Pró-Fármacos , Ácido Aminolevulínico , Ouro , Humanos , FosfolipídeosRESUMO
The lack of studies involving the effects in human health associated with the chronic ingestion of pollutants lead to the path of investigating the action of these compounds in cell membrane models. We demonstrated the interaction (causes and consequences) of the hormone 17 α-ethinylestradiol (EE2) with lipid monolayers (prepared as Langmuir films) and bilayers prepared as small unilamellar vesicles (SUVs) and giant unilamellar vesicles (GUVs). Both fluidity and majority chemical composition of real plasma cell membrane were guaranteed using the phospholipid 1-palmitoil-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC). Surface pressure-mean molecular area (π-A) isotherms and PM-IRRAS measurements highlighted the strong interaction of EE2 with POPC monolayers, leading the hormone to remain at the air/water interface and promoting its penetration into the phospholipid hydrophobic chains. In the case of bilayers, the entrance of the hormone inside the SUV is likely facilitated by their high curvature. In GUVs, EE2 was responsible for changes in the spherical shape, forming structures like buds and lipid protrusions. The set of results indicates the strong effects of EE2 on fluid membranes, which is an important feature to predict its damage in human cells.
Assuntos
Anticoncepcionais , Lipossomas Unilamelares , Etinilestradiol , Humanos , Bicamadas Lipídicas , Fosfatidilcolinas , FosfolipídeosRESUMO
Slowing the degradation of perovskite-based solar cells (PSCs) is of substantial interest. We engineered the surface by introducing a hydrophobic overlayer on a three-dimensional (3D) perovskite using fluorinated or nonfluorinated aryl ammonium cation spacers. The placement of a fluoroarene cation allows the formation of a bilayer structure, that is, layered/3D perovskites. By doing so, the surface hydrophobic character increases notably by the virtue of the perfluorinated benzene moiety. The fabricated devices thereof gave higher performance and longevity than control devices in addition to boosting reliability. The fluoro-phenethylammonium iodide (FPEAI)-based devices showed lower nonradiative carrier recombination. To decipher the orientation of the spacer cation in this bilayer structure, we probed the surface by polarization-modulated infrared reflection-absorption spectroscopy and noted substantial differences in the orientation due to the presence of fluorine substitution. We hypothesize that the stronger van der Waals interactions due to the higher electronegativity in FPEAI govern the orientation and performance enhancement and act as a barrier to moisture decomposition.
RESUMO
Herein, we study the effect of adding bismuth to Ni-nanostructured catalysts (NixBi1-x, x = 100-90 at. %) for glycerol electro-oxidation in alkaline solution by combining physiochemical, electrochemical, and in situ infrared spectroscopy techniques, as well as continuous electrolysis with HPLC (high-performance liquid chromatography) product analysis. The addition of small quantities of Bi (<20 at. %) to Ni nanoparticles led to significant activity enhancement at lower overpotentials, with Ni90Bi10 displaying an over 2-fold increase compared to Ni. Small quantities of bismuth actively affected the reaction selectivity of Ni by suppressing the pathways with C-C bond cleavage, hindering the production of carbonate and formate and improving the formation of tartronate, oxalate, and glycerate. Furthermore, the effect of aging on NixBi1-x catalysts was investigated, resulting in structural modification from the Ni-Bi double shell/core structure to Bi decorated on the folded Ni sheet, thus enhancing their activity twice after 2 weeks of aging. NiBi catalysts are promising candidates for glycerol valorization to high-value-added products.
RESUMO
Unsupported nanoparticles are now recognized as model catalysts to evaluate the intrinsic activity of metal particles, irrespectively of that of the support. Co nanoparticles with different morphologies, rods, diabolos and cubes have been prepared by the polyol process and tested for the acceptorless catalytic dehydrogenation of alcohols under solvent-free conditions. Rods crystallize with the pure hcp structure, diabolos with a mixture of hcp and fcc phases, while the cubes crystallize in a complex mixture of hcp, fcc and ε-Co phases. All the cobalt particles are found to be highly selective towards the oxidation of a model secondary alcohol, octan-2-ol, into the corresponding ketone while no significant activity is found with octan-1-ol. Our results show the strong influence of particle shape on the activity and catalytic stability of the catalysts: Co nanorods display the highest conversion (85%), selectivity (95%) and recyclability compared to Co diabolos and Co cubes. We correlate the nanorods excellent stability with a strong binding of carboxylate ligands on their {1 1 2¯ 0} facets, preserving their crystalline superficial structure, as evidenced by phase modulation infrared reflection absorption spectroscopy.
RESUMO
The present study deals with interaction of two air pollutants: dibenzodioxin, DD, and its' monochlorinated derivative, 2-chlorodibenzodioxin, 2CLDD, with models of the lung surfactant (LS) system. A monolayer composed of DPPC and POPC in 1:1â¯molar ratio was used as a model of LS. One component monolayers of DPPC and POPC were also examined, to model the interiors of LC and LE domains in LS, respectively. Molecular dynamics simulations and measurements of surface pressure isotherms, as well as polarization modulation-infrared reflection-absorption spectra were employed to study the influence of dioxins on the monolayers. We demonstrate, that both dioxins adsorb and accumulate in the hydrophobic parts of all three monolayers. DD molecules prefer flat orientation on the surface at large areas. Upon compression, they lift and orient perpendicularly to the monolayer. Flat orientation of DD molecules leads to their large surface area. In consequence they preferentially locate in vicinity of unsaturated chains of POPC - they are small enough to fill void spaces created by kinks in unsaturated chains. 2CLDD orient along monolayer normal already at the largest areas and preference for POPC was not observed for them. In laterally relaxed states, a condensing effect, connected with reduction of surface area available to the lipids was observed for both dioxins. In the case of 2CLDD, additional locally ordering influence of dioxin molecules was detected. In compressed states, the presence of dioxin molecules hinders alignment and uniform ordering of lipid chains.
Assuntos
Dioxinas/química , Pulmão/patologia , Surfactantes Pulmonares/uso terapêutico , Surfactantes Pulmonares/farmacologiaRESUMO
A hybrid bilayer lipid membrane (hBLM), constructed with a 1-hexadecanethiol self-assembled interior leaflet and a 1,2-dipalmitoyl-sn-glycero-3-cytidine nucleolipid exterior leaflet, was deposited at the surface of a gold (111) electrode. This system was used to investigate the molecular recognition reaction between the cytosine moieties of the lipid head group with guanine molecules in the bulk electrolyte solution. Electrochemical measurements and photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) were employed to characterize the system and determine the extent of the molecular recognition reaction. The capacitance of the hBLM-covered gold electrode was very low (~1 µF cm-2), therefore the charge density at the gold surface was small. Changing the electrode potential had a minimal effect on the complexation between the cytosine moieties and guanine molecules due to small changes in the static electric field across the membrane. This behavior favored the formation of the guanine-cytosine complex.