Pre-Loading with Drugs before Entering the Nighttime Entertainment District: A Scoping Review.

Background: Nighttime entertainment districts attract many people who pre-load with alcohol and other substances before entering licensed venues. Despite the harms and dangers associated with both alcohol pre-loading and drug use respectively, there is a paucity of research on drug and polysubstance pre-loading. Objectives: The primary objectives of this scoping review are to systematically map out the body of existing literature on drug and polysubstance pre-loading, discuss methodological potentials and pitfalls in field-based research, identify gaps in knowledge, and derive practical implications and opportunities for future research. Methods: Using the PRISMA (ScR) guidelines, we conducted a search of Medline, PsycINFO, Embase, Scopus, CINAHL, Social Services Abstracts, Sociological Abstracts, and Web of Science databases. We followed this up by conducting an author and citation analysis of relevant articles. Results: Of the 632 data sources identified, 338 articles were reviewed after removing duplicates. Overall, only nine articles were included and thematically analyzed. In our review and analysis of the literature, we find people who drug pre-load to be a particularly vulnerable subset of the population. We also posit that the point-of-entry design has greater sensitivity than the commonly used portal-in design. From this, we also draw attention to various time points where field-based researchers can provide intervention. Conclusions: Given the high prevalence of young adults engaging in the behavior, clinicians should consider pre-loading behaviors when assessing for risk and vulnerability. Field-based research would elucidate the full breadth and scope of the growing pre-loading phenomenon and the dangers associated with this practice.

Efficacy and safety of virtual bronchoscopic navigation with fused fluoroscopy and vessel mapping for access of pulmonary lesions.

BACKGROUND AND OBJECTIVE: Virtual bronchoscopic navigation (VBN) with fused fluoroscopy and vessel mapping provides a point of entry (POE) for puncturing airway wall to biopsy lesions. The study was designed to evaluate the safety and efficacy of this technology to diagnose peripheral pulmonary lesions. METHODS: It was a prospective, single-arm, multicentre study. Patients underwent lesions biopsy with the Archimedes® VBN System via a POE using one of the two techniques: (1) bronchoscopic transparenchymal nodule access (BTPNA) and (2) guided transbronchial needle aspiration (TBNA). Biopsy yield, sampling yield and diagnostic yield were mainly determined in lesions biopsy attempted. RESULTS: One hundred and thirty patients underwent anaesthesia and constituted the intention-to-treat population. One hundred and four patients with 114 lesions had biopsy attempted. Mean lesion size was 2.4 ± 1.13 cm. Sufficient tissue samples were obtained from 86 lesions with a biopsy yield of 75.4%. Nevertheless, sufficient samples for diagnosis based on histology ± cytology were obtained from 107 lesions with a sampling yield of 93.9%. Follow-up was conducted for more than 1 year, with a diagnostic yield of 75.4% and 72.8%, respectively, on high and low estimate with consideration of three lesions without follow-up. Two (1.9%) pneumothoraxes and one (1.0%) mild bleeding occurred. CONCLUSION: BTPNA and guided TBNA contribute to safe and effective sampling of peripheral pulmonary lesions. A relatively high biopsy yield was obtained independent of the presence or absence of a bronchus sign (BS), and high sampling yield and diagnostic yield were obtained independent of location, lesion size and presence or absence of a BS.

Preparedness and management of global public health threats at points of entry in Ireland and the EU in the context of a potential Brexit.

Health security in the European Union (EU) aims to protect citizens from serious threats to health such as biological agents and infectious disease outbreaks- whether natural, intentional or accidental. Threats may include established infections, emerging diseases or chemical and radiological agents. Co-ordinated international efforts attempt to minimize risks and mitigate the spread of infectious disease across borders.We review the current situation (March 2019) with respect to detection and management of serious human health threats across Irish borders- and what may change for Ireland if/when the United Kingdom (UK) withdraws from the EU (Brexit).Specifically, this paper reviews international legislation covering health threats, and its national transposition; and EU legislation and processes, especially the relevant European Decision No. 1082/2013/EU of the European Parliament and of the Council on serious cross border threats to health with repeal of Decision No 2119/98/EC. We enumerate European surveillance systems and agencies which relate to port health security; we consider consortia and academic arrangements within the EU framework and established collaboration with the World Health Organization. We describe current Health Services Executive port health structures in Ireland which address preparedness and management of human health threats at points of entry. We appraise risks which Brexit could bring, reviewing literature on shared concerns about these risks, and we evaluate post-Brexit challenges for the EU, and potential opportunities to remain within current structures in shared health threat preparedness and response.It is imperative that the UK, Ireland and the EU work together to mitigate these risks using some agreed joint coordination mechanisms for a robust, harmonised approach to global public health threats at points of entry.

Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality.

Tap water from 497 properties using private water supplies, in an area of metalliferous and arsenic mineralisation (Cornwall, UK), was measured to assess the extent of compliance with chemical drinking water quality standards, and how this is influenced by householder water treatment decisions. The proportion of analyses exceeding water quality standards were high, with 65 % of tap water samples exceeding one or more chemical standards. The highest exceedances for health-based standards were nitrate (11 %) and arsenic (5 %). Arsenic had a maximum observed concentration of 440 µg/L. Exceedances were also high for pH (47 %), manganese (12 %) and aluminium (7 %), for which standards are set primarily on aesthetic grounds. However, the highest observed concentrations of manganese and aluminium also exceeded relevant health-based guidelines. Significant reductions in concentrations of aluminium, cadmium, copper, lead and/or nickel were found in tap waters where households were successfully treating low-pH groundwaters, and similar adventitious results were found for arsenic and nickel where treatment was installed for iron and/or manganese removal, and successful treatment specifically to decrease tap water arsenic concentrations was observed at two properties where it was installed. However, 31 % of samples where pH treatment was reported had pH < 6.5 (the minimum value in the drinking water regulations), suggesting widespread problems with system maintenance. Other examples of ineffectual treatment are seen in failed responses post-treatment, including for nitrate. This demonstrates that even where the tap waters are considered to be treated, they may still fail one or more drinking water quality standards. We find that the degree of drinking water standard exceedances warrant further work to understand environmental controls and the location of high concentrations. We also found that residents were more willing to accept drinking water with high metal (iron and manganese) concentrations than international guidelines assume. These findings point to the need for regulators to reinforce the guidance on drinking water quality standards to private water supply users, and the benefits to long-term health of complying with these, even in areas where treated mains water is widely available.

Maintaining Cross-Border Cargo Movements Between Jordan and Saudi Arabia During the COVID-19 Pandemic.

One of Jordan's essential border crossings, the Al-Omari border crossing, is 1 of 3 land crossings between Jordan and Saudi Arabia and is located 160 km west of the capital city of Amman. Given its economic importance and essential role in the functioning of food supply networks across the region, Jordan undertook evidence-driven actions to keep the border crossing safely open during the initial phase of the COVID-19 pandemic. Cross-border coordination and collaboration, specifically with international contact tracing and case management, have been critical elements of Jordan's response. While several bottlenecks and delays led to documented clusters of infections among truck drivers, this case study illustrates the use of evidence to mitigate disease exposure and spread. Plans to manage public health threats need to consider sustainable strengthened surveillance and laboratory capacities coupled with efficient cross-border communication and coordination plans implemented across multiple sectors engaged in cross-country health.

Evacuation of Refugees from Afghanistan: Health Control at the Spanish Border in the Context of the COVID-19 Pandemic.

Following the announcement of the retreat of troops from Afghanistan, the Spanish Government organised the so-called "Antigone Operation" for the evacuation of Afghan collaborators. The most relevant ministries were involved in the response. The Ministry of Health, through the Foreign Health Department, performed the health control on arrival. The whole operation was conducted at an air base. It included the health control of refugees composed of temperature measurement, a basic visual control and a coronavirus disease (COVID-19) rapid antigen test for those over 12 years of age; the assessment of their basic needs (food and hygiene); identification and security procedures; and the initial administrative processing. The refugees were accommodated in a temporary facility at the base, where they waited to be transferred to their final destinations. Between 19 and 27 August 2021, 2168 refugees arrived on 17 flights; 680 of them were children under 12 years of age. One thousand four hundred and ninety-nine rapid antigen tests were performed, with one positive result. "Antigone Operation" is unprecedented in Spain and is one of the most complex operations carried out in recent years. The COVID-19 pandemic required the establishment of a health control system on arrival, performed by Foreign Health, which contributed significantly to the overall success of the operation.

Ideal entry point and direction of retrograde intramedullary nailing of the tibia.

PURPOSE: To determine the ideal entry point and direction of retrograde intramedullary nailing of the tibia. METHODS: The imaging data of patients with distal tibial fractures from June 2020 to December 2021 in our hospital were collected, and computer-aided design was performed. The relevant data were imported into the software for processing, so as to obtain a distal tibial fracture model and simulate the retrograde intramedullary nail placement in the tibia. The entry points and angles at which the intramedullary nail could be inserted successfully and the fracture could be maintained in good alignment were overlapped and counted to obtain the safe entry range and angle. The center of this safe range is the ideal entry point for retrograde intramedullary nailing of the tibia, and the mean value of the angle is the ideal direction of entry. RESULTS: The ideal entry point of the retrograde intramedullary nailing was located at the midpoint of the medial malleolus in the C-arm fluoroscopic anteroposterior (AP) and lateral view. The ideal nail entry direction was located at the anatomic axis of the medial malleolus in the AP position and at the anatomic axis of the distal tibial metaphysis in the lateral position. CONCLUSION: The ideal point and direction of nail insertion for retrograde tibial intramedullary nailing is a "double midpoint, double axis" approach.

Virtual prototyping and characterization of a point-of-entry UV-LED water disinfection reactor with the synergic effect of radiation, hydrodynamics, and inactivation kinetics.

We developed and studied one of the first high-flow UV-LED water disinfection reactors applicable to point-of-entry (POE) water disinfection. A multiphysics computational model was created to predict the performance of UV reactor design concepts by modeling the synergic effect of radiation, hydrodynamics, and the inactivation kinetics of microorganisms. The geometrical optics that describe light propagation in terms of rays were employed to model the radiation profile of multiple UV-LEDs with optical components in complex reactor geometries, the first account of such an approach. The computational solution of the mass, momentum, and species equations was applied to model the hydrodynamics and kinetics. We designed a reactor through a detailed computational study of the optical and hydrodynamic performance of various design strategies. Highly efficient UV fluence distribution in the reactor was achieved by creating nearly collimated UV radiation beams across the reactor and managing the hydrodynamics using a flow distributor. We fabricated a prototype of the optimized reactor design for experimental studies. Biodosimetry tests were conducted for various flow rates and UV transmittances (UVTs), and the experimental results were compared with the model predictions. The design, which employed 14 UV-LEDs assembled over custom-made optical modules, resulted in a reduction equivalent dose (RED) of 65 mJ/cm2 at a flow rate of 20 liters per minute (LPM) while consuming about 50 W energy. This reactor design required only 0.05 W radiant power per LPM flow rate to achieve an NSF Class A UV dose equivalent of 40 mJ/cm2. The findings of this study provide insights into UV-LED reactor development strategies as well as the creation and application of reactor virtual prototyping tools for designing and optimizing highly efficient UV-LED reactors.

An alien in Marseille: investigations on a single Aedes aegypti mosquito likely introduced by a merchant ship from tropical Africa to Europe.

Control of invasive species relies partly on permanent surveillance at international points of entry. We report the exceptional trapping of one adult mosquito (Diptera: Culicidae) in the port of Marseille, France, in July 2018, during a routine survey conducted according to International Health Regulations. Morphological and molecular identification classified the specimen as a female Aedes (Stegomyia) aegypti (L.), vector of many arboviruses, absent from Europe and the Mediterranean rim since the 1950s. A world reference panel of approximately 23,000 genome-wide single nucleotide polymorphisms determined that the mosquito originated from Cameroon, west Africa. Cross-reference of this geographic location with boats traveling from Central Africa to Marseille during the trapping period suggests that the mosquito travelled within an identified merchant ship, a vehicles carrier connecting Douala, Cameroon to Marseille, France. This ship left Douala on June 25, 2018 and arrived 20 days later in Marseille on July 15. The mosquito was captured 350 m away from the dock. The interception of a propagule of an invasive species is a rare event that must be considered a priority to prevent its successful establishment.

Title: Un alien à Marseille : enquêtes sur un seul moustique Aedes aegypti vraisemblablement introduit par un navire marchand de l'Afrique tropicale vers l'Europe. Abstract: La lutte contre les espèces invasives repose en partie sur une surveillance permanente aux points d'entrée internationaux. Nous rapportons ici le piégeage exceptionnel d'un moustique adulte (Diptera: Culicidae) dans le port de Marseille, France, en juillet 2018, au cours d'une enquête de routine menée selon les recommandations du Règlement Sanitaire International. L'identification morphologique et moléculaire a désigné ce spécimen comme étant une femelle d'Aedes (Stegomyia) aegypti (L.), vecteur de nombreux arbovirus, absent d'Europe et du pourtour Méditerranéen depuis les années 1950. Une base de référence mondiale du polymorphisme des nucléotides individuels pour ~23 000 génomes complets a permis de déterminer que ce moustique était originaire du Cameroun. Le croisement de cette information de localisation géographique avec celle de la circulation des bateaux entre l'Afrique Centrale et Marseille au cours de la période de piégeage suggère que le moustique a voyagé à l'intérieur d'un navire de commerce identifié, un transporteur de véhicules reliant Douala (Cameroun) à Marseille (France). Ce navire a quitté Douala le 25 juin 2018 pour arriver à Marseille 20 jours plus tard, le 15 juillet 2018. Le moustique a été capturé à 350 mètres du dock. L'interception d'un propagule d'une espèce invasive est un évènement rare qui doit être considéré de façon prioritaire afin d'empêcher la réussite de son installation.

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems.

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Re-Starting the Cruise Sector during the COVID-19 Pandemic in Greece: Assessing Effectiveness of Port Contingency Planning.

Coronavirus disease (COVID-19) outbreaks on board cruise ships early in the pandemic highlighted gaps worldwide in public health emergency contingency plans (PHECPs) for responding to unknown threats. To restart cruise operations in 2021 and respond to potential COVID-19 outbreaks, a major tourist-based Greek island port (Port A) developed a COVID-19 PHECP. We assessed plan effectiveness by reviewing epidemiological data and monitoring outcomes, followed by an intra-action review (IAR) analyzing three event responses. From May to December 2021, 118 calls from 23 cruise ships with 119,930 passengers were recorded, with 29 COVID-19 cases in 11 cruises on board 7 ships. No outbreak was recorded during the study period. Strengths of the introduced PHECP included commitment of senior management; a core multi-disciplinary team of local authorities/ship agents involved in design and execution; interoperability agreements for port and ships' PHECPs; cruise industry commitment to compliance; and pre-existing scenarios considering capacity needs. Central government coordination for preparedness planning at local ports is essential for successful responses. Monitoring local and country level response capacities is critical to inform planning, risk assessment, and decision-making. Immediately recording ports' response actions provides the basis to capture lessons and improve contingency plans. To facilitate communication and common response protocols between European and non-European ports, IARs should be conducted between countries.

From a long-distance threat to the invasion front: a review of the invasive Aedes mosquito species in Belgium between 2007 and 2020.

Invasive mosquito species (IMS) and their associated mosquito-borne diseases are emerging in Europe. In Belgium, the first detection of Aedes albopictus (Skuse 1894) occurred in 2000 and of Aedes japonicus japonicus (Theobald 1901) in 2002. Early detection and control of these IMS at points of entry (PoEs) are of paramount importance to slow down any possible establishment. This article reviews the introductions and establishments recorded of three IMS in Belgium based on published (2007-2014) and unpublished (2015-2020) data collected during several surveillance projects. In total, 52 PoEs were monitored at least once for the presence of IMS between 2007 and 2020. These included used tyre and lucky bamboo import companies, airports, ports, parking lots along highways, shelters for imported cutting plants, wholesale markets, industrial areas, recycling areas, cemeteries and an allotment garden at the country border with colonised areas. In general, monitoring was performed between April and November. Mosquitoes were captured with adult and oviposition traps as well as by larval sampling. Aedes albopictus was detected at ten PoEs, Ae. japonicus at three PoEs and Aedes koreicus (Edwards 1917) at two PoEs. The latter two species have established overwintering populations. The percentage of PoEs positive for Ae. albopictus increased significantly over years. Aedes albopictus is currently entering Belgium through lucky bamboo and used tyre trade and passive ground transport, while Ae. japonicus through used tyre trade and probably passive ground transport. In Belgium, the import through passive ground transport was first recorded in 2018 and its importance seems to be growing. Belgium is currently at the invasion front of Ae. albopictus and Ae. japonicus. The surveillance and control management actions at well-known PoEs associated to long-distance introductions are more straightforward than at less-defined PoEs associated with short-distance introductions from colonised areas. These latter PoEs represent a new challenge for IMS management in Belgium in the coming years. Aedes albopictus is expected to become established in Belgium in the coming years, hence increasing the likelihood of local arbovirus transmission. The implementation of a sustainable, structured and long-term IMS management programme, integrating active and passive entomological surveillance, vector control and Public Health surveillance is therefore pivotal.

COVID-19 Rapid Antigen Test as Screening Strategy at Points of Entry: Experience in Lazio Region, Central Italy, August-October 2020.

COVID-19 pandemic is a dramatic health, social and economic global challenge. There is urgent need to maximize testing capacity. Rapid Antigen Tests (RAT) represent good candidates for point-of-care and mass surveillance testing to rapidly identify SARS-CoV-2-infected people, counterbalancing lower sensitivity vs. gold standard molecular tests with fast results and possible recurrent testing. We describe the results obtained with the testing algorithm implemented at points of entry (airports and ports) in the Lazio Region (Italy), using the STANDARD F COVID-19 Antigen Fluorescence ImmunoAssay (FIA), followed by molecular confirmation of FIA-positive samples. From mid-August to mid-October 2020, 73,643 RAT were reported to the Regional Surveillance Information System for travelers at points of entry in Lazio Region. Of these, 1176 (1.6%) were FIA-positive, and the proportion of RT-PCR-confirmed samples was 40.5%. Our data show that the probability of confirmation was directly dependent from the semi-quantitative FIA results. In addition, the molecularly confirmed samples were those with high levels of virus and that were actually harboring infectious virus. These results support public health strategies based on early mass screening campaigns by RAT in settings where molecular testing is not feasible or easily accessible, such as points of entry. This approach would contribute to promptly controlling viral spread through travel, which is now of particular concern due to the spread of SARS-CoV-2 variants.

COVID-19 pandemic in Economic Community of West African States (ECOWAS) region: implication for capacity strengthening at Point of Entry.

Free movement between countries without a visa is allowed within the 15-country Economic Community of West African States (ECOWAS) region. However, little information is available across the region on the International Health Regulation (IHR 2005) capacities at points of entry (PoE) to detect and respond appropriately to public health emergencies such as Coronavirus Disease 2019 (COVID-19). ECOWAS and the member states can better tailor border health measures across the region by understanding public health strengths and priorities for improvement at PoEs. A comprehensive literature review was combined with a self-assessment of capacities at PoEs across the fifteen member states from February to July 2020. For the assessment, the member states completed an adapted World Health Organization (WHO) self-assessment checklist by classifying capacity for seven domains as fully, partially, or not implemented. The team implemented three focus group discussion (FGD) sessions and 13 key informant interviews (KII) with national-level border health stakeholders. Univariate analysis was used to summarize the assessment data and detailed content analysis was applied to evaluate FGD and KII results. Of the 15 member states, 3 (20%) are landlocked; 3 (20%) have more than one seaport. Eleven (73%) countries have 1 designated airport, 3 (20%) have two airports, and only one country (6.7%) has three airports. Two hundred and seventy-eight designated ground crossings were identified in 12 countries (80%). Strengths across the PoE were existence of decrees and ministerial acts in some ECOWAS countries and establishment of national taskforces for the COVID-19 response at PoE in ECOWAS. Major challenges were porous borders, poor intersectoral coordination, lack of harmonized traveler screening measures, shortage of staff, and inadequate financial resources. Despite all these challenges, there are opportunities such as leveraging the regional cross-border poliomyelitis coordination and control mechanism, and existence of networks of infection prevention and control specialists and field epidemiologists. However, political instabilities in some countries pose a threat to government commitments to PoE activities. The capacity to respond to public health emergencies at PoE in the ECOWAS region is still below IHR standard. Public health capacities at a majority of IHR-designated PoE in the 15-country region do not meet required core capacities standards.

Effective screening strategies for detection of asymptomatic COVID-19 travelers at airport quarantine stations: Exploratory findings in Japan.

The quantitative reverse transcription polymerase chain reaction method using nasopharyngeal swabs (NPS RT-qPCR) is regarded as the reference standard for diagnosing coronavirus disease 2019 (COVID-19). However, when using NPS RT-qPCR at busy airport quarantine stations, there are constraints on testing capacity, time, travelerstolerance, and availability of personal protective equipment for quarantine officers. A feasible alternative is therefore needed to test incoming travelers, especially when passenger numbers increase with the resumption of business, tourism, and economic activities. To explore alternatives to NPS RT-qPCR, we collected nasopharyngeal, anterior nasal, and saliva samples chronologically over days 1-7 from asymptomatic COVID-19 air travelers who were under quarantine at a designated facility, and we then compared test results for 9 different methods, comprising RT-qPCR (including the reference method), loop-mediated isothermal amplification (LAMP), and qualitative and quantitative antigen testing. We evaluated sensitivity for 97 person-day samples independently to evaluate asymptomatic travelers regardless of their testing date and period of asymptomatic status upon entry. Sensitivity of the different tests varied from 46.6% to 81.0%, but this was improved from 72.7% to 100.0% when the viral load was > 10 4 copies/sample on NPS RT-qPCR. Thus, most high-risk asymptomatic travelers with higher viral load would be detected by the tests evaluated. Quantitative antigen testing using saliva samples showed 90.9% sensitivity and provided quicker results, and should be an acceptable alternative to NPS RT-qPCR at busy airport quarantine stations. We discuss the implications of our exploratory findings for establishing a comprehensive and feasible testing strategy for COVID-19 among air passengers.

Making Waves: Principles for the Design of Sustainable Household Water Treatment.

Household water treatment (HWT) represents a key engineering intervention for billions of people's daily and emergency water needs. However, established HWT practices experience different challenges to achieve sustainability. Here, five essential principles are identified and discussed for the design of sustainable HWT, including treatment capability, environmental friendliness, user experience, economic viability, and social acceptance. A well-implemented HWT, with a consideration of energy resilience, relies heavily on advanced materials, innovative technologies, and/or creative designs capable of reliably abating both traditional and emerging contaminants, while minimizing undesirable chemical leaching and the formation of harmful disinfection byproducts. Environmental friendliness can be pursued by appreciably reducing environmental and energy footprints and properly managing HWT residuals. Meanwhile, a user-centered design approach and economic consideration need to be integrated into the HWT development to improve end users' willingness to use and pay, respectively. Finally, social acceptance should be intertwined by fostering public acceptance and market adoption for strengthening commercial viability of new-generation HWT products. Given that these principles span across different domains, multidisciplinary collaboration is required throughout different stages of the HWT technology innovation.

SARS-CoV-2 Early Screening at the Point of Entry: Travelers From Bangladesh to Italy-July 2020.

We report phylogenetic and mutational analysis by NGS of six SARS-CoV-2 strains from patients flying from Bangladesh to Italy (July 2020). Data suggest that no further circulation of such imported strains occurred in Italy, stating the efficacy of early screening at the point of entry and supporting the importance of molecular epidemiology in monitoring the efficacy of control measures.

Reduction in drinking water arsenic exposure and health risk through arsenic treatment among private well households in Maine and New Jersey, USA.

Over 2 million mostly rural Americans are at risk of drinking water from private wells that contain arsenic (As) exceeding the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level (MCL) of 10 micrograms per liter (µg/L). How well existing treatment technologies perform in real world situations, and to what extent they reduce health risks, are not well understood. This study evaluates the effectiveness of household As treatment systems in southern-central Maine (ME, n = 156) and northern New Jersey (NJ, n = 94) and ascertains how untreated well water chemistry and other factors influence As removal. Untreated and treated water samples, as well as a treatment questionnaire, were collected. Most ME households had point-of-use reverse-osmosis systems (POU RO), while in NJ, dual-tank point-of-entry (POE) whole house systems were popular. Arsenic treatment systems reduced well water arsenic concentrations ([As]) by up to two orders of magnitude, i.e. from a median of 71.7 to 0.8 µg/L and from a mean of 105 to 14.3 µg/L in ME, and from a median of 8.6 to 0.2 µg/L and a mean of 15.8 to 2.1 µg/L in NJ. More than half (53%) of the systems in ME reduced water [As] to below 1 µg/L, compared to 69% in NJ. The treatment system failure rates were 19% in ME (>USEPA MCL of 10 µg/L) and 16% in NJ (>NJ MCL of 5 µg/L). In both states, the higher the untreated well water [As] and the As(III)/As ratio, the higher the rate of treatment failure. POE systems failed less than POU systems, as did the treatment systems installed and maintained by vendors than those by homeowners. The 7-fold reduction of [As] in the treated water reduced skin cancer risk alone from 3765 to 514 in 1 million in ME, and from 568 to 75 in 1 million in NJ.

Core Capacities for Public Health Emergencies of International Concern at Ground Crossings: A Case Study from North India.

OBJECTIVE: International airports, ports, and ground crossings are required to have health units for undertaking public health measures during routine times and specific measures during the time of public health emergency of international concern (PHEIC). This study was conducted at a ground crossing of North India to assess the implementation status of International Health Regulations (IHR) (2005) at a ground crossing in the prevention and control of public health emergencies and to assess the risk of imported infections from a ground crossing. METHODS: A qualitative study was conducted at the selected point of entry. The World Health Organization (WHO) core capacity assessment tool and in-depth interviews were used for data collection in the form of meetings and visits to isolation sites, and general observations were conducted regarding facilities on routine and other infrastructure and equipment that can be used during emergencies. Respondents were recruited using purposive methods. RESULTS: The findings reveal that there is lack of awareness among the travelers, which increases the risks of spreading diseases. The overall implementation status at the ground crossing according to the assessment conducted using WHO Tool was 76%. It showed the need for further strengthening of the implementation at the site. Gaps were identified regarding the local capacity for handling chemical, radiological and nuclear hazards, and shortage of regular staff through stakeholders. CONCLUSION: The findings from this study, as well as the suggestions and recommendations given by stakeholders, should help revise the current strategies of action. Hence, the gaps identified should be fulfilled to better respond to PHEIC at the ground crossings.

Impacts of 3 Different Endodontic Access Cavity Designs on Dentin Removal and Point of Entry in 3-dimensional Digital Models.

INTRODUCTION: The purpose of this study was to evaluate the tooth structure theoretically required to be removed in the coronal and cervical regions to accomplish 3 different endodontic access preparations in a novel digital model. The deviation of the center of access cavity from the central fossa will also be measured and compared among the 3 endodontic cavity designs, which in turn may serve as suggested points of entry for different access openings. METHODS: Twenty-one maxillary molars and 15 mandibular molars were selected and 3-dimensionally imaged with cone-beam computed tomographic imaging. Three-dimensional (3D) volume reconstructions were made and converted into stereolithography files. Digital access cavity preparation was performed on each 3D reconstruction model with the 3 most commonly used endodontic access preparations: minimally invasive (MI), modified straight-line (MS), and traditional straight-line (TS) techniques. After the access cavity outlines were determined, digital sectioning of each reconstructed 3D tooth model was performed orthogonal to the long axis of the tooth at 3 levels: (1) passing through the central fossa, (2) 1.5 mm apical to the central fossa, and (3) 2 mm apical to the cementoenamel junction. The linear distance from the centroid of the access opening to the central fossa was measured to calculate the point of entry, and the amount of tooth structure removal at the pericervical area was measured to calculate the theoretically minimum amount of linear dentin removal required. Two-way repeated measures analysis of variance was performed for the interactions between different access designs and the amount of cervical dentin removal. Other data were statistically analyzed with 1-way repeated measures analysis of variance. The Tukey post hoc test was used for multiple comparisons. Significance was set at .05. RESULTS: The amount of deviation of the center of the access cavity from the central fossa in all test groups was less than 1 mm. The dimensions of access openings differed significantly among the 3 access forms (TS > MS > MI, P < .0001). The amount of required cervical dentin removal was the greatest in the TS method followed by the MS and MI methods (P < .0001). CONCLUSIONS: The central fossa could serve as good starting points in all access preparations in both maxillary and mandibular molars. Dentin removal in the coronal and cervical regions was the greatest in the TS design followed by the MS and MI designs. When comparing different canals in the same access form, less cervical dentin was sacrificed in the palatal canals of maxillary molars and the distal canals of mandibular molars.