Preferred Lung Accumulation of Polystyrene Nanoplastics with Negative Charges.

With the increasing presence of nanoplastics (NPs) in the human bloodstream, it is urgent to investigate their tissue accumulation and potential health risks. This study examines the effects of the size and surface charges of polystyrene (PS) NPs on lung accumulation. Using magnetic separation, we identified the protein corona composition on iron-core PS NPs, revealing the enrichment of vitronectin and fibrinogen. The corona promotes integrin αIIbß3 receptor-mediated uptake by lung endothelial cells, explaining that both the corona composition and protein structure determine preferred localization of negatively charged PS NPs in the lung. This study uncovers the role of protein corona in NP uptake and the way NPs enter the lung, emphasizing the need to consider interactions between nanoplastics with varying surface characteristics and biological molecules in the nanotoxicological field.

Polystyrene nanoplastics enhance poxvirus preference for migrasome-mediated transmission.

Since the emergence of a global outbreak of mpox in 2022, understanding the transmission pathways and mechanisms of Orthopoxviruses, including vaccinia virus (VACV), has become paramount. Nanoplastic pollution has become a significant global issue due to its widespread presence in the environment and potential adverse effects on human health. These emerging pollutants pose substantial risks to both living organisms and the environment, raising serious health concerns related to their proliferation. Despite this, the effects of nanoparticles on viral transmission dynamics remain unclear. This study explores how polystyrene nanoparticles (PS-NPs) influence the transmission of VACV through migrasomes. We demonstrate that PS-NPs accelerate the formation of migrasomes early in the infection process, facilitating VACV entry as soon as 15 h post-infection (hpi), compared to the usual onset at 36 hpi. Immunofluorescence and transmission electron microscopy (TEM) reveal significant co-localization of VACV with migrasomes induced by PS-NPs by 15 hpi. This interaction coincides with an increase in lipid droplet size, attributed to higher cholesterol levels influenced by PS-NPs. By 36 hpi, migrasomes exposed to both PS-NPs and VACV exhibit distinct features, such as retraction fibers and larger lipid droplets, emphasizing their critical role in cargo transport during viral infections. These results suggest that PS-NPs may act as modulators of viral transmission dynamics through migrasomes, with potential implications for antiviral strategies and environmental health.

Microplastics increase cadmium absorption and impair nutrient uptake and growth in red amaranth (Amaranthus tricolor L.) in the presence of cadmium and biochar.

Microplastic (MP) pollution in terrestrial ecosystems is gaining attention, but there is limited research on its effects on leafy vegetables when combined with heavy metals. This study examines the impact of three MP types-polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS)-at concentrations of 0.02, 0.05, and 0.1% w/w, along with cadmium (Cd) and biochar (B), on germination, growth, nutrient absorption, and heavy metal uptake in red amaranth (Amaranthus tricolor L.). We found that different MP types and concentrations did not negatively affect germination parameters like germination rate, relative germination rate, germination vigor, relative germination vigor, and germination speed. However, they increased phytotoxicity and decreased stress tolerance compared to an untreated control (CK1). The presence of MPs, particularly the PS type, reduced phosphorus and potassium uptake while enhancing Cd uptake. For example, treatments PS0.02CdB, PS0.05CdB, and PS0.1CdB increased Cd content in A. tricolor seedlings by 158%, 126%, and 44%, respectively, compared to the treatment CdB (CK2). Additionally, MP contamination led to reduced plant height, leaf dry matter content, and fresh and dry weights, indicating adverse effects on plant growth. Moreover, the presence of MPs increased bioconcentration factors and translocation factors for Cd, suggesting that MPs might act as carriers for heavy metal absorption in plants. On the positive side, the addition of biochar improved several root parameters, including root length, volume, surface area, and the number of root tips in the presence of MPs, indicating potential benefits for plant growth. Our study shows that the combination of MPs and Cd reduces plant growth and increases the risk of heavy metal contamination in food crops. Further research is needed to understand how different MP types and concentrations affect various plant species, which will aid in developing targeted mitigation strategies and in exploring the mechanisms through which MPs impact plant growth and heavy metal uptake. Finally, investigating the potential of biochar application in conjunction with other amendments in mitigating these effects could be key to addressing MP and heavy metal contamination in agricultural systems.

Magnetotactic Sperm Cells for Assisted Reproduction.

Biohybrid micromotors are active microscopic agents consisting of biological and synthetic components that are being developed as novel tools for biomedical applications. By capturing motile sperm cells within engineered microstructures, they can be controlled remotely while being propelled forward by the flagellar beat. This makes them an interesting tool for reproductive medicine that can enable minimally invasive sperm cell delivery to the oocyte in vivo, as a treatment for infertility. The generation of sperm-based micromotors in sufficiently large numbers, as they are required in biomedical applications has been challenging, either due to the employed fabrication techniques or the stability of the microstructure-sperm coupling. Here, biohybrid micromotors, which can be assembled in a fast and simple process using magnetic microparticles, are presented. These magnetotactic sperm cells show a high motility and swimming speed and can be transferred between different environments without large detrimental effects on sperm motility and membrane integrity. Furthermore, clusters of micromotors are assembled magnetically and visualized using dual ultrasound (US)/photoacoustic (PA) imaging. Finally, a protocol for the scaled-up assembly of micromotors and their purification for use in in vitro fertilization (IVF) is presented, bringing them closer to their biomedical implementation.

Polystyrene-Based Matrix to Enhance the Fluorescence of Aggregation-Induced Emission Luminogen for Fluorescence-Guided Surgery.

Achieving ultrabright fluorogens is a key issue for fluorescence-guided surgery (FGS). Fluorogens with aggregation-induced emission (AIEgens) are potential agents for FGS on the benefit of the bright fluorescence in physiological conditions. Herein, the fluorescence brightness of AIEgen is further improved by preparing the nanoparticle using a polystyrene-based matrix and utilizing it for tumor FGS with a high signal-to-background ratio. After encapsulating AIEgen into polystyrene-poly (ethylene glycol) (PS-PEG), the fluorescence intensity of the prepared AIE@PS-PEG nanoparticles is multiple times that of nanoparticles in 1, 2-distearoyl-sn-glycero-3-phosphoethanolamine-poly (ethylene glycol) (DSPE-PEG), a commonly used polymer matrix for nanoparticle preparation. Molecular dynamics simulations suggest that higher free energy is required for the outer rings of AIEgen to rotate in polystyrene than in the DSPE, indicating that the benzene rings in polystyrene can restrict the intramolecular motions of AIEgen better than the alkyl chain in DSPE-PEG. Fluorescence correlation microscopy detections suggest that the triplet excited state of AIEgens is less in PS-PEG than in DSPE-PEG. The restricted intramolecular motions and suppressed triplet excited state result in ultrabright AIE@PS-PEG nanoparticles, which are more conducive to illuminating tumor tissues in the intestine for FGS. The illumination of metastatic tumors in lungs by AIE@PS-PEG nanoparticles is also tried.

Impact of Protein Corona Formation and Polystyrene Nanoparticle Functionalisation on the Interaction with Dynamic Biomimetic Membranes Comprising of Integrin.

Plastics, omnipresent in the environment, have become a global concern due to their durability and limited biodegradability, especially in the form of microparticles and nanoparticles. Polystyrene (PS), a key plastic type, is susceptible to fragmentation and surface alterations induced by environmental factors or industrial processes. With widespread human exposure through pollution and diverse industrial applications, understanding the physiological impact of PS, particularly in nanoparticle form (PS-NPs), is crucial. This study focuses on the interaction of PS-NPs with model blood proteins, emphasising the formation of a protein corona, and explores the subsequent contact with platelet membrane mimetics using experimental and theoretical approaches. The investigation involves αIIbß3-expressing cells and biomimetic membranes, enabling real-time and label-free nanoscale precision. By employing quartz-crystal microbalance with dissipation monitoring studies, the concentration-dependent cytotoxic effects of differently functionalised ~210 nm PS-NPs on HEK293 cells overexpressing αIIbß3 are evaluated in detail. The study unveils insights into the molecular details of PS-NP interaction with supported lipid bilayers, demonstrating that a protein corona formed in the presence of exemplary blood proteins offers protection against membrane damage, mitigating PS-NP cytotoxicity.

Photochemical Aerobic Upcycling of Polystyrene Plastics via Synergistic Indirect HAT Catalysis.

Plastic pollution constitutes an evergrowing urgent environmental problem, since overaccumulation of plastic waste, arising from the immense increase of the production of disposable plastic products, overcame planet's capacity to properly handle them. Chemical upcycling of polystyrene constitutes a convenient method for the conversion of plastic waste into high-added value chemicals, suggesting an attractive perspective in dealing with the environmental crisis. We demonstrate herein a novel, easy-to-perform organocatalytic photoinduced aerobic protocol, which proceeds via synergistic indirect hydrogen atom transfer (HAT) catalysis under LED 390 nm Kessil lamps as the irradiation source. The developed method employs a BrCH2CN-thioxanthone photocatalytic system and was successfully applied to a variety of everyday-life plastic products, leading to the isolation of benzoic acid after simple base-acid work up in yields varying from 23-49 %, while a large-scale experiment was successfully performed, suggesting that the photocatalytic step is susceptible to industrial application.

Ion-Specific Effects on Ion and Polyelectrolyte Solvation.

Ion-specific effects on aqueous solvation of monovalent counter ions, Na + ${^+ }$ , K + ${^+ }$ , Cl - ${^- }$ , and Br - ${^- }$ , and two model polyelectrolytes (PEs), poly(styrene sulfonate) (PSS) and poly(diallyldimethylammonium) (PDADMA) were here studied with ab initio molecular dynamics (AIMD) and classical molecular dynamics (MD) simulations based on the OPLS-aa force-field which is an empirical fixed point-charge force-field. Ion-specific binding to the PE charge groups was also characterized. Both computational methods predict similar response for the solvation of the PEs but differ notably in description of ion solvation. Notably, AIMD captures the experimentally observed differences in Cl - ${^- }$ and Br - ${^- }$ anion solvation and binding with the PEs, while the classical MD simulations fail to differentiate the ion species response. Furthermore, the findings show that combining AIMD with the computationally less costly classical MD simulations allows benefiting from both the increased accuracy and statistics reach.

A novel non-chemically amplified resist based on polystyrene-iodonium derivatives for electron beam lithography.

To break the resolution limitation of traditional resists, more work is needed on non-chemically amplified resists (non-CARs). Non-CARs based on iodonium salt modified polystyrene (PS-I) were prepared with controllable molecular weight and structure. The properties of the resist can be adjusted by the uploading of iodonium salts on the polymer chain, the materials with a higher proportion of iodonium salts show better lithography performance. By comparing contrast curves and quality of the lithographic patterns, the optimum developing condition of 4-methyl-2-pentanone and ethyl alcohol (v:v = 1:7) was selected. The high-resolution stripes of 15 nm half-pitch (HP) can be achieved by PS-I0.58in e-beam lithography (EBL). PS-I0.58shows the advanced lithography performance in the patterns of 16 nm HP and 18 nm HP stripes with low line edge roughness (3.0 nm and 2.4 nm). The resist shows excellent potential for further pattern transfer, the etch selectivity of resist PS-I0.58to the silicon was close to 12:1. The lithographic mechanism of PS-I was investigated by experimental and theoretical calculation, which indicates the polarity of materials changes results in the solubility switch. This work provides a new option and useful guidelines for the development of high-resolution resist.

Biofragmentation of Polystyrene Microplastics: A Silent Process Performed by Chironomus sancticaroli Larvae.

Polystyrene (PS) is one of the main synthetic polymers produced around the world, and it is present in the composition of a wide variety of single-use objects. When released into the environment, these materials are degraded by environmental factors, resulting in microplastics. We investigated the ability of Chironomus sancticaroli (Diptera, Chironomidae) to promote the fragmentation of PS microspheres (24.5 ± 2.9 µm) and the toxic effects associated with exposure to this polymer. C. sancticaroli larvae were exposed to 3 different concentrations of PS (67.5, 135, and 270 particles g-1 of dry sediment) for 144 h. Significant lethality was observed only at the highest concentration. A significant reduction in PS particle size as well as evidence of deterioration on the surface of the spheres, such as grooves and cracks, was observed. In addition, changes in oxidative stress biomarkers (SOD, CAT, MDA, and GST) were also observed. This is the first study to report the ability of Chironomus sp. to promote the biofragmentation of microplastics. The information obtained demonstrates that the macroinvertebrate community can play a key role in the degradation of plastic particles present in the sediment of freshwater environments and can also be threatened by such particle pollution.

Single-Particle Analysis of the Photodegradation of Submicron Polystyrene Particles Using Infrared Photothermal Heterodyne Imaging.

Sunlight irradiation is the predominant process for degrading plastics in the environment, but our current understanding of the degradation of smaller, submicron (<1000 nm) particles is limited due to prior analytical constraints. We used infrared photothermal heterodyne imaging (IR-PHI) to simultaneously analyze the chemical and morphological changes of single polystyrene (PS) particles (∼1000 nm) when exposed to ultraviolet (UV) irradiation (λ = 250-400 nm). Within 6 h of irradiation, infrared bands associated with the backbone of PS decreased, accompanied by a reduction in the particle size. Concurrently, the formation of several spectral features due to photooxidation was attributed to ketones, carboxylic acids, aldehydes, esters, and lactones. Spectral outcomes were used to present an updated reaction scheme for the photodegradation of PS. After 36 h, the average particle size was reduced to 478 ± 158 nm. The rates of size decrease and carbonyl band area increase were -24 ± 3.0 nm h-1 and 2.1 ± 0.6 cm-1 h-1, respectively. Using the size-related rate, we estimated that under peak terrestrial sunlight conditions, it would take less than 500 h for a 1000 nm PS particle to degrade to 1 nm.

Photoaged Nanopolystyrene Affects Neurotransmission to Induce Transgenerational Neurotoxicity in Caenorhabditis elegans.

Nanopolystyrene (NPS), a frequently employed nanoplastic, is an emerging environmental contaminant known to cause neurotoxicity in various organisms. However, the potential for transgenerational neurotoxic effects, especially from photoaged NPS (P-NPS), remains underexplored. This study investigated the aging of virgin NPS (V-NPS) under a xenon lamp to simulate natural sunlight exposure, which altered the physicochemical characteristics of the NPS. The parental generation (P0) of Caenorhabditis elegans was exposed to environmental concentrations (0.1-100 µg/L) of V-NPS and P-NPS, with subsequent offspring (F1-F4 generations) cultured under NPS-free conditions. Exposure to 100 µg/L P-NPS resulted in more pronounced deterioration in locomotion behavior in the P0 generation compared to V-NPS; this deterioration persisted into the F1-F2 generations but returned to normal in the F3-F4 generations. Additionally, maternal exposure to P-NPS damaged dopaminergic, glutamatergic, and serotonergic neurons in subsequent generations. Correspondingly, there was a significant decrease in the levels of dopamine, glutamate, and serotonin, associated with reduced expression of neurotransmission-related genes dat-1, eat-4, and tph-1 in the P0 and F1-F2 generations. Further analysis showed that the effects of P-NPS on locomotion behavior were absent in subsequent generations of eat-4(ad572), tph-1(mg280), and dat-1(ok157) mutants, highlighting the pivotal roles of these genes in mediating P-NPS-induced transgenerational neurotoxicity. These findings emphasize the crucial role of neurotransmission in the transgenerational effects of P-NPS on locomotion behavior, providing new insights into the environmental risks associated with exposure to photoaged nanoplastics.

Plastic Quantification and Polyethylene Overestimation in Agricultural Soil Using Large-Volume Pyrolysis and TD-GC-MS/MS.

Quantification of microplastics in soil is needed to understand their impact and fate in agricultural areas. Often, low sample volume and removal of organic matter (OM) limit representative quantification. We present a method which allows simultaneous quantification of microplastics in homogenized, large environmental samples (>1 g) and tested polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) (200-400 µm) overestimation by fresh and diagenetically altered OM in agricultural soils using a new combination of large-volume pyrolysis adsorption with thermal desorption-gas chromatography-tandem mass spectrometry (TD-GC-MS/MS). Characteristic MS/MS profiles for PE, PET, and PS were derived from plastic pyrolysis and allowed for a new mass separation of PET. Volume-defined standard particles (125 × 125 × 20 µm3) were developed with the respective weight (PE: 0.48 ± 0.12, PET: 0.50 ± 0.10, PS: 0.31 ± 0.08 µg), which can be spiked into solid samples. Diagenetically altered OM contained compounds that could be incorrectly identified as PE and suggest a mathematical correction to account for OM contribution. With a standard addition method, we quantified PS, PET, and PEcorrected in two agricultural soils. This provides a base to simultaneously quantify a variety of microplastics in many environmental matrices and agricultural soil.

Intrinsic Peroxidase-like Activity of Polystyrene Nanoplastics Mediates Oxidative Stress.

Nanoplastics represent a global environmental concern due to their ubiquitous presence and potential adverse impacts on public and environmental health. There is a growing need to advance the mechanistic understanding of their reactivity as they interact with biological and environmental systems. Herein, for the first time, we report that polystyrene nanoplastics (PSNPs) have intrinsic peroxidase-like activity and are able to mediate oxidative stress. The peroxidase-like activity is dependent on temperature and pH, with a maximum at pH 4.5 and 40 °C. The catalytic activity exhibits saturation kinetics, as described by the Michaelis-Menten model. The peroxidase-like activity of PSNPs is attributed to their ability to mediate electron transfer from peroxidase substrates to H2O2. Ozone-induced PSNP aging can introduce oxygen-containing groups and disrupt aromatic structures on the nanoplastic surface. While ozonation initially enhances peroxidase-like activity by increasing oxygen-containing groups without degrading many aromatic structures, extended ozonation destroys aromatic structures, significantly reducing this activity. The peroxidase-like activity of PSNPs can mediate oxidative stress, which is generally positively correlated with their aromatic structures, as suggested by the ascorbic acid assay. These results help explain the reported oxidative stress exerted by nanoplastics and provide novel insights into their environmental and public health implications.

Environmental Markers of Plastics and Microplastics.

The slow reaction rates to chemical and photochemical degradation are well-known properties of plastics. However, large plastic surfaces exposed to environmental conditions release particles and compounds that affect ecosystems and human health. The aim of this work was to identify compounds associated with the degradation of polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC) microplastics (markers) on silica and sand and evaluate their use to screen microplastics on natural sand. Products were identified by using targeted and untargeted LC-HRMS analysis. All polymers underwent chemical oxidation on silica. PE released dicarboxylic acids (HO2C-(CH2)n-CO2H (n = 4-30), while PS released cis/trans-chalcone, trans-dypnone, 3-phenylpropiophenone, and dibenzoylmethane. PVC released dicarboxylic acids and aromatic compounds. Upon irradiation, PE was stable while PS released the same compounds as under chemical oxidation but at lower yields. Under the above condition, PVC generated HO2C-[CH2-CHCl]n-CH2-CO2H and HO2C-[CH2-CHCl]n-CO2H (n = 2-19) dicarboxylic acids. The same products were detected on sand but at a lower concentration than on silica due to better retention within the pores. Detection of markers of PE and PS on natural sand allowed us to screen microplastics by following a targeted analysis. Markers of PVC were not detected before or after thermal/photo-oxidation due to the low release of compounds and limitations associated with surface exposure/penetration of radiation.

Confocal Surface-Enhanced Raman Imaging of the Intestinal Barrier Crossing Behavior of Model Nanoplastics in Daphnia Magna.

Nanoplastics (nP) pose hazards to aquatic animals once they are ingested. Significant knowledge gaps exist regarding the nP translocation across the animal intestine, which is the first barrier between the ingested nP and the animal body. We examined the intestinal barrier crossing behavior of nP in an aquatic animal model (Daphnia magna) and determined the translocation mechanism with the help of model "core-shell" polystyrene nanoplastics (nPS) and confocal surface-enhanced Raman spectroscopy (SERS). The Raman reporter (4-mercaptobenzoic acid)-tagged gold "core" of the model nPS enables sensitive and reliable particle imaging by confocal SERS. This method detected SERS signals of model nPS concentration as low as 4.1 × 109 particles/L (equivalent to 0.27 µg/L PS "shell" concentration). The translocation was observed with the help of multilayer stacked Raman maps of SERS signals of the model nPS. With a higher concentration or longer exposure time of the model nPS, uptake and translocation of the plastic particles increased. In addition, we demonstrated that clathrin-dependent endocytosis and macropinocytosis were two major mechanisms underlying the translocation. This study contributes to a mechanistic understanding of nP translocation by using the pioneering model nPS and an analytical toolkit, which undergird further investigations into nP behavior and health effects in aquatic species.

Quantifying the Chemical Composition and Real-Time Mass Loading of Nanoplastic Particles in the Atmosphere Using Aerosol Mass Spectrometry.

Plastic debris, including nanoplastic particles (NPPs), has emerged as an important global environmental issue due to its detrimental effects on human health, ecosystems, and climate. Atmospheric processes play an important role in the transportation and fate of plastic particles in the environment. In this study, a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was employed to establish the first online approach for identification and quantification of airborne submicrometer polystyrene (PS) NPPs from laboratory-generated and ambient aerosols. The fragmentation ion C8H8+ is identified as the major tracer ion for PS nanoplastic particles, achieving an 1-h detection limit of 4.96 ng/m3. Ambient PS NPPs measured at an urban location in Texas are quantified to be 30 ± 20 ng/m3 by applying the AMS data with a constrained positive matrix factorization (PMF) method using the multilinear engine (ME-2). Careful analysis of ambient data reveals that atmospheric PS NPPs were enhanced as air mass passed through a waste incinerator plant, suggesting that incineration of waste may serve as a source of ambient NPPs. The online quantification of NPPs achieved through this study can significantly improve our understanding of the source, transport, fate, and climate effects of atmospheric NPPs to mitigate this emerging global environmental issue.

Facile Synthesis and Characterization of Fluorescent Polystyrene Nanospheres for Homogeneous Light-Initiated Chemiluminescence Immunoassay.

Homogeneous light-initiated chemiluminescence technology (LICA) is widely used in clinical diagnostics due to the advantages of high sensitivity, minimal reagent usage, and no need for washing. Luminescent microspheres receive singlet oxygen emitted by photosensitive microspheres to generate optical signals. Therefore,1O2-initiated luminescent nanospheres are crucial, but there are few reports on the preparation of 1O2-initiated luminescent nanospheres. Herein, monodisperse luminescent Eu/C-28@PS (Eps) nanospheres were prepared and optimized using chelate Eu (TTA)3phen and 4-(2-phenyl-5,6-dihydro1,4-oxathiin-3-yl)-N, N-ditetradecylbenzenamine (C-28) as probe dye via THF/water swelling-shrinking procedure. Various swelling parameters were studied to obtain the swelling conditions that produce the minimum particle size and narrow size distribution, which shows good results in uniform particle size distribution (~ 250 nm, a PDI of 0.03), surface carboxylate content (1.18 mmol/g), and BSA loading capability (129.8 mg/g) in the case of 20 mg total probe dosage and 2 h of incubation at 40 °C using 14% THF/water mixture as a co-solvent system. The composition of the entrapped probe has a gain effect on the 1O2-initiated fluorescent signal and the optimal ratio of Eu (TTA)3phen: C-28 (1:1) was obtained on a commercial analyzer using IgG and anti-human IgG as models in PBS buffer. These results indicate that monodisperse luminescent Eps nanospheres are suitable as light-initiated chemiluminescence sensors and have great application potential in early detection, screening tests, and prognostic evaluation of patients.

Use of a sample injection loop for an accurate measurement of particle number concentration by flow cytometry.

Flow cytometry plays a pivotal role in biotechnology by providing quantitative measurements for a wide range of applications. Nonetheless, achieving precise particle quantification, particularly without relying on counting beads, remains a challenge. In this study, we introduce a novel exhaustive counting method featuring a sample loop-based injection system that delivers a defined sample volume to a detection system to enhance quantification in flow cytometry. We systematically assess the performance characteristics of this system with micron-sized polystyrene beads, addressing issues related to sample introduction, adsorption, and volume measurement. Results underscore the excellent analytical performance of the proposed method, characterized by high linearity and repeatability. We compare our approach to counting bead-based measurements, and while an approximate bias value was observed, the measured values were found to be similar between the methods, demonstrating its comparability and reliability. This method holds great promise for improving the accuracy and precision of particle quantification in flow cytometry, with implications for various fields including healthcare and environmental monitoring.

Influence of Mixed Solvent in the Morphology and Hydrophobicity of Electrospun Polystyrene Porous Fibers.

Electrospun polystyrene (PS) fibers are produced using a mixed solvent of chloroform and n,n-dimethylformamide (DMF) to investigate the influence of the solvent ratio on the fiber surface morphology and contact angle of the obtained mats. Electrospinning is a simple processing technique for producing fibers with diameters in the range of nanometers to a few micrometers. When using the different solvent ratios for this process, porous PS membranes are created due to nonsolvent and thermally induced phase separation (N-TIPS). The morphology of the fibers is analyzed through scanning electron microscopy (SEM), which showed that fibers have diameters between 200 nm and 6 µm. SEM also revealed that the pores present on the surface of the fibers vary from densely compacted and well-formed nanopores with diameters in the range of 20-50 nm to larger pores with sizes of ≈100-200 nm. The pore size varied with different solvent ratios. The surface area is analyzed using the Brunauer-Emmett-Teller (BET) method and found that the polymeric fibers have a high surface area (≈35 m2 g-1). The fibers with such morphology are highly hydrophobic, with a contact angle higher than 143°. These materials are excellent candidates for applications in textiles, filtration, and biomedical fields.