Polysaccharide-dextrin thickened fluids for individuals with dysphagia: recent advances in flow behaviors and swallowing assessment methods.

The global aging population has brought about a pressing health concern: dysphagia. To effectively address this issue, we must develop specialized diets, such as thickened fluids made with polysaccharide-dextrin (e.g., water, milk, juices, and soups), which are crucial for managing swallowing-related problems like aspiration and choking for people with dysphagia. Understanding the flow behaviors of these thickened fluids is paramount, and it enables us to establish methods for evaluating their suitability for individuals with dysphagia. This review focuses on the shear and extensional flow properties (e.g., viscosity, yield stress, and viscoelasticity) and tribology (e.g., coefficient of friction) of polysaccharide-dextrin-based thickened fluids and highlights how dextrin inclusion influences fluid flow behaviors considering molecular interactions and chain dynamics. The flow behaviors can be integrated into the development of diverse evaluation methods that assess aspects such as flow velocity, risk of aspiration, and remaining fluid volume. In this context, the key in-vivo (e.g., clinical examination and animal model), in-vitro (e.g., the Cambridge Throat), and in-silico (e.g., Hamiltonian moving particles semi-implicit) evaluation methods are summarized. In addition, we explore the potential for establishing realistic assessment methods to evaluate the swallowing performance of thickened fluids, offering promising prospects for the future.

Effect of pH on the Structure, Functional Properties and Rheological Properties of Collagen from Greenfin Horse-Faced Filefish (Thamnaconus septentrionalis) Skin.

Collagen is an important biopolymer widely used in food, cosmetics and biomedical applications. Understanding the effect of pH on the structure and properties of collagen is beneficial for its further processing and exploitation. In this study, greenfin horse-faced filefish skin collagen (GHSC) was prepared and identified as a type I collagen. We systematically investigated the effect of pH on the structural, functional and rheological properties of GHSC. Scanning electron microscopy showed that the collagen morphology changed from an ordered stacked sheet structure to a rough silk-like structure as pH increased. Gaussian-fitted Fourier infrared spectroscopy results of the collagen revealed that it unfolded with increasing pH. Moreover, the ordered structure was reduced, and random coils became the dominant conformation. Its ß-sheet and random coil contents increased from 18.43 ± 0.08 and 33.62 ± 0.17 to 19.72 ± 0.02 and 39.53 ± 1.03%, respectively, with increasing pH. α-helices and ß-turns decreased from 35.00 ± 0.26 and 12.95 ± 0.01 to 29.39 ± 0.92 and 11.36 ± 0.10%, respectively. The increase in ß-sheets and random coils allowed the pI-treated collagen to exhibit maximum water contact angle. The emulsification and foaming properties decreased and then increased with increasing pH in a V-shape. The increased net surface charge and ß-sheets in collagen benefited its emulsification and foaming properties. The rheological results showed that the protoprotein exhibited shear-thinning properties in all pH ranges. The collagen solutions showed liquid-like behaviour in low-pH (2, 4) solutions and solid-like behaviour in high-pH (6, 7.83 and 10) solutions. Moreover, the frequency-dependent properties of the storage modulus (G') and loss modulus (G″) of the collagen solutions weakened with increasing pH. Collagen has considerable frequency-dependent properties of G' and G″ at low pH (2, 4). Thus, the importance of collagen raw material preparation for subsequent processing was emphasised, which may provide new insights into applying collagen-based materials in food, biomaterials and tissue engineering.

Effects of Ultrasonic Power on the Structure and Rheological Properties of Skin Collagen from Albacore (Thunnus alalunga).

The effects of ultrasonic power (0, 150, 300, 450, and 600 W) on the extraction yield and the structure and rheological properties of pepsin-soluble collagen (PSC) from albacore skin were investigated. Compared with the conventional pepsin extraction method, ultrasonic treatment (UPSC) significantly increased the extraction yield of collagen from albacore skin, with a maximum increase of 8.56%. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that peptides of low molecular weight were produced when the ultrasonic power exceeded 300 W. Meanwhile, secondary structure, tertiary structure, and X-ray diffraction analyses showed that the original triple helix structure of collagen was intact after the ultrasonic treatment. The collagen solutions extracted under different ultrasonic powers had significant effects on the dynamic frequency sweep, but a steady shear test suggested that the collagen extracted at 150 W had the best viscosity. These results indicate that an ultrasonic power between 150 and 300 W can improve not only the extraction yield of natural collagen, but also the rheological properties of the collagen solution without compromising the triple helix structure.

Properties of low-fat Cheddar cheese prepared from bovine-camel milk blends: Chemical composition, microstructure, rheology, and volatile compounds.

Making cheese from camel milk (CM) presents various challenges due to its different physicochemical properties compared with bovine milk (BM). In this study, we investigated the chemical composition, proteolysis, meltability, oiling off, texture profile, color, microstructure, and rheological properties of low-fat Cheddar cheese (LFCC) prepared from BM-CM blends. LFCC was produced from BM or BM supplemented with 15% CM (CM15) and 30% CM (CM30), and analyzed after 14, 60, 120, and 180 d of ripening at 8°C. Except for salt content, no significant differences were observed among LFCC from BM, CM15, and CM30. The addition of CM increased the meltability and oiling off in the resulting cheese throughout storage. With respect to color properties, after melting, LFCC CM30 showed lower L* values than LFCC made from BM and CM15, and a* and b* values were higher than those of BM and CM15 samples. LFCC from CM30 also exhibited lower hardness compared with the other cheeses. Moreover, LFCC made from BM showed a rough granular surface, but cheese samples made from BM-CM blends exhibited a smooth surface. The rheological parameters, including storage modulus, loss modulus, and loss tangent, varied among cheese treatments. The determined acetoin and short-chain volatile acids (C2-C6) in LFCC were affected by the use of CM, because CM15 showed significantly higher amounts than BM and CM30, respectively. The detailed interactions between BM and CM in the cheese matrix should be further investigated.

Potassium-based emulsifying salts in processed cheese: A rheological, textural, tribological, and thermal approach.

The aim of the study was to investigate the effect of potassium-based emulsifying salts (ES; 2% wt/wt concentration) with different phosphate chain lengths (dipotassium hydrogenphosphate [K2HPO4; DKP], tetrapotassium diphosphate [K4P2O7; KTPP], pentapotassium triphosphate [K5P3O10; TKPP]) on the physicochemical, viscoelastic, textural, tribological, thermal, and sensory properties of processed cheese (PC; 40% wt/wt DM, 50% wt/wt fat in DM) during a 60d storage period (6°C ± 2°C). On the whole, the hardness of all PC samples increased with the increasing chain length of ES (DKP < TKPP < KTPP) and the prolonging storage period. Moreover, the hardness results were in accordance with those of the rheological analysis. All PC samples exhibited a more elastic character (G' > G″; tan δ < 1). The type of potassium-based ES affected the binding of water into the structure of the PC. Furthermore, the study confirmed that the manufactured PC received optimal sensory scores, without any excessive bitterness. It could be concluded that the type of applied ES and storage length affected the functional properties of PC. Finally, the information provided in this study could serve as a tool for the dairy industry to help appropriately select potassium-based ES for PC manufacture with desired properties.

Alginate/whey protein isolate-based emulgel as an alternative margarine replacer in processed cheese: Impact on rheological, mechanical, nutritional, and sensory characteristics.

The effects of partial or full replacement of margarine by alginate/whey protein isolate-based olive oil emulgel on nutritional, physicochemical, mechanical, and rheological properties of processed cheese (PC) were investigated in this work. All formulated samples had the same amount of total fat, DM, and pH. According to the results of the fatty acids profile, the PC sample in which the margarine was fully replaced by the emulgel (EPC100) had the highest (49.84%) oleic acid content and showed a reduction of 23.7% in SFA compared with the control sample (EPC0; formulated just with margarine). In addition, EPC0 had the highest hardness among various cheese samples, which was also confirmed by its compact microstructure. Dynamic oscillatory measurements revealed that EPC100 had the highest crossover strain (or resistance to deformation). The high rigidity of this sample was related to the 3-dimensional structure of emulgel. According to the creep test results, EPC100 showed the lowest relative recovery (flowability). A high temperature dependency of viscoelastic moduli was observed in EPC0 at 42°C. No significant differences were observed between the color attributes and sensory properties of the various cheese samples. Alginate/whey protein isolate-based olive oil emulgel can be considered as a healthy margarine replacer in PC.

Cure State Sensing of Polymethylmethacrylate Using a Vibrating Axial Probe.

A new axially vibrating sensor based on an audio voice coil transducer and a lead zirconate titanate (PZT) piezoelectric disc microphone was developed as a probe for the measurement of in vitro rheological fluid properties, including curing progress for polymethylmethacrylate (PMMA) mixtures with important uses as bone cement in the field of orthopedics. The measurement of the vibrating axial sensor's acoustic spectra in PMMA undergoing curing can be described by a damped harmonic oscillator formalism and resonant frequency (ca. 180 Hz) shift can be used as an indicator of curing progress, with shifts to the blue by as much as 14 Hz. The resonant frequency peak was measured in 19 different 4.0 g PMMA samples to have a rate of shift of 0.0462 ± 0.00624 Hz·s-1 over a period of 400 s while the PMMA was in a dough state and before the PMMA transitioned to a hard-setting phase. This transition is unambiguously indicated by this sensor technology through the generation of a distinct circa 5 kHz high-Q under-damped ring-down response.

Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas.

The development of e-textiles necessitates the creation of highly conductive inks that are compatible with precise inkjet printing, which remains a key challenge. This work presents an innovative, syringe-based method to optimize a novel bio-sourced silver ink for inkjet printing on textiles. We investigate the relationships between inks' composition, rheological properties, and printing behavior, ultimately assessing the electrical performance of the fabricated circuits. Using Na-alginate and polyethylene glycol (PEG) as the suspension matrix, we demonstrate their viscosity depends on the component ratios. Rheological control of the silver nanoparticle-laden ink has become paramount for uniform printing on textiles. A specific formulation (3 wt.% AgNPs, 20 wt.% Na-alginate, 40 wt.% PEG, and 40 wt.% solvent) exhibits the optimal rheology, enabling the printing of 0.1 mm thick conductive lines with a low resistivity (8 × 10-3 Ω/cm). Our findings pave the way for designing eco-friendly ink formulations that are suitable for inkjet printing flexible antennas and other electronic circuits onto textiles, opening up exciting possibilities for the next generation of E-textiles.

Starch from Unripe Apples (Malus domestica Borkh) as an Alternative for Application in the Food Industry.

This study investigated the properties of starch isolated from the unripe fruit of two apple cultivars (Malus domestica Borkh) grown in southern Poland (Central Europe). The chemical composition of both starches, molecular mass, their granulation, thermal characteristics, swelling characteristics, and rheological characteristics were studied. The starches differed significantly in ash, phosphorus, and protein content. The water-binding capacity at temperatures of 25-65 °C was similar, while differences of 20% appeared at higher temperatures. In contrast, a significant difference was found in the solubility of the two starches in the temperature range of 25-75 °C. The study showed that apple starches have a relatively low tendency to retrograde, with the enthalpy of gelatinization for starch from the Oliwka variety being 40% higher than that from the Pyros variety. However, the starches differed in the hardness of the gels formed, i.e., one variety formed soft gels with an internal structure resistant to external forces, while the other formed hard gels.

New Derivatives of Modified Starch for Food Technology.

The food industry extensively uses chemically modified starches and their hydrolysates, which is mainly due to their emulsification ability. Therefore, it becomes inevitable to develop new starch derivatives, including modified starch hydrolysates, and effective preparation methods to meet the increasing demands of producers, consumers, and technology. This study comprehensively researches the physical, chemical, and functional properties (such as the water-binding capacity, swelling power, solubility, and fat absorption capacity) of chemically modified biopolymers and their enzymatic hydrolysis products. We utilized oxidized and acetylated potato and waxy-corn starches with varying degrees of substitution by carboxyl and acetyl groups in our research. The process of enzymatic hydrolysis was performed in a recirculated membrane reactor (CRMR). Our findings indicated that the physicochemical properties of starch derivatives and their hydrolysates depended on the biological origin of the biopolymer and the type and degree of modification. However, the presence of carboxyl groups in the modified starch molecules is critical and affects the rheological properties and water-binding capacity of the starch preparations. For example, in the case of waxy-corn starch preparations with a lower content of carboxyl groups (i.e., derivatives with a low degree of oxidation), the water-binding capacity (WBC) increases when compared to native starch. The highest WBC value of 206.3% was noted for the doubly modified waxy-corn starch with an oxidation degree of 0.2% and an acetylation degree of 2.5%, while native waxy-corn starch shows a WBC of 161.4%. In contrast, it was observed that preparations with a higher content of carboxyl groups, i.e., derivatives with an oxidation degree of 2.5%, show a lower swelling power compared to native waxy starch.

Study on the Physical and Rheological Characterisation of Low-Density Polyethylene (LDPE)/Recycled Crumb Rubber (RCR) on Asphalt Binders.

Recycled crumb rubber (RCR) is considered a reliable asphalt modifier and a solution to the problem of scrap tyre recycling. RCR-modified asphalt (RCRMA) typically has good low-temperature performance and storage stability. However, the pre-treatment of crumb rubber (CR) impairs its physical properties, resulting in poor high-temperature performance, which limits the industrial application of RCRMA. In this study, low-density polyethylene (LDPE) composite RCR was used to modify asphalt, and LDPE/RCR-composite-modified asphalt (L-RCRMA) was produced to compensate for the deficiencies in the high-temperature performance of RCRMA. The comprehensive physical properties of L-RCRMA were elucidated using tests such as the conventional properties, rotational viscosity, and rheological tests. The results showed that the incorporation of LDPE improved the high-temperature stability and rutting resistance of the asphalt, but an excessive amount of LDPE impaired the low-temperature performance and storage stability of L-RCRMA. Therefore, it is necessary to control the amount of LDPE to balance the performance of the asphalt. On this basis, we recommend a dosage of 20% for RCR and 1.5% for LDPE.

Interactions between paramyosin and actin greatly improve their thermostability and gel properties.

BACKGROUND: Myofibrillar proteins, the main contributors to the quality of meat products, are the main structural protein component of muscle and have functional properties such as the formation of a 3D protein gel network and water binding. The susceptibility of meat-derived proteins to heat-induced aggregation is the functional constraint that hinders their applications in industry, and so establishing an effective but simple method to improve their thermostability of the proteins is of great importance. RESULTS: In the present study, we describe an easy approach to perform high colloidal thermostability of both paramyosin and actin by mixing them at low ionic strength. The improvement in thermal stability was found to be derived from intermolecular interactions between these two different proteins through non-covalent binding with each other. Consequently, such interactions protected each of them from thermal-induced degradation compared to individual components. Notably, this binary native protein mixture rather than single paramyosin or actin component has the ability to form protein hydrogels with a shear-thinning and reversible sol-gel transformation behavior, which is markedly different from most of reported heat-induced, denatured protein hydrogels. CONCLUSION: The present study not only presents a facile and effective strategy for improvement of the thermal stability and gel properties of a binary paramyosin and actin mixture, but also enhances our understanding of how mutual interactions of protein components affect their physicochemical and functional properties. © 2023 Society of Chemical Industry.

Effects of physical method and enzymatic hydrolysis on the properties of soybean fiber-rich stabilizer for oil in water emulsions.

BACKGROUND: Okara is a by-product from the soybean industry and an abundant resource of insoluble soybean fiber (ISF). ISF with various properties could be obtained by different extraction methods. It is an attractive option to utilize okara by taking advantage of ISF as an emulsifier or stabilizer. RESULTS: Compared with the untreated ISF (ISFUT ), superfine grinding reduced the particle size and viscosity of ISF (ISFSG ). Steam explosion increased the water solubility from 17.5% to 51.7% but decreased the water holding capacity and swelling capacity of ISF (ISFSE ) from 15.0 and 14.0 g/g to 4.2 and 3.3 g/g, respectively. Emulsions prepared by ISFUT and ISFSG before or after enzymatic hydrolysis presented large oil droplets and were unstable. Although emulsions prepared by ISFSE after enzymatic hydrolysis (ISFSE-E ) showed flocculation, the volume-weighted average diameter (19.7 µm) were the smallest while the viscosity and viscoelastic modulus were the highest, and exhibited excellent physical stability during storage. CONCLUSION: ISF obtained by physical and hydrolysis treatment displayed diverging physicochemical properties while ISF prepared by steam explosion-enzymatic hydrolysis presented the best potential to stabilize emulsions. The present study could provide novel information about the utilization of okara by the application of ISF as an emulsifier or stabilizer. © 2023 Society of Chemical Industry.

Soy protein isolate-guar gum-goose liver oil O/W Pickering emulsions that remain stable under accelerated oxidation at high temperatures.

BACKGROUND: Goose liver oil (GLO) is a solid-liquid mixture, rich in polyunsaturated fatty acids and high in nutritional value, but poor in fluidity and easily oxidized. Therefore, oil-in-water (O/W) Pickering emulsions of three polysaccharides and soy protein isolate (SPI) with GLO were prepared to improve the stability of it. RESULTS: Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), Fourier-transform infrared spectroscopy, and zeta potential revealed that the SPI and complexes with konjac glucomannan, pectin, and guar gum (GG) ranged from 17 to 75 kDa, with the site of action being the -OH stretch and the amide group, and bound by hydrogen bonding. Adding konjac glucomannan and GG significantly increased the water contact angle of the SPI to 74.1° and 59.0°, respectively. Therefore, the protein-polysaccharide complexes could enhance the emulsion stability. In addition, the O/W Pickering emulsions with GLO had near-Newtonian fluid rheological properties with a significant increase in apparent viscosity and viscoelasticity, forming a dual network structure consisting of a ductile and flexible protein network and a rigid and brittle polysaccharide network. The microstructure observation indicated that the O/W emulsions were spherical and homogeneous. The highest emulsification activity was observed for the SPI-GG-GLO emulsions, without significant delamination or flocculation and high oxidative stability after 7 days in storage. CONCLUSION: These results demonstrate that the construction of SPI-GG-GLO O/W Pickering emulsions can stabilize GLO even at high temperatures that promote oxidation. © 2023 Society of Chemical Industry.

Fed-batch fermentation strategy for efficient welan gum production by Sphingomonas sp. FM01.

BACKGROUND: As a novel type of extracellular polysaccharide produced by Sphingomonas sp., welan gum has been widely applied in various fields because of its excellent properties. The study has improved the fermentation process. RESULTS: The initial sucrose concentration, temperature and stirring speed were set to 20 g L-1, 33 °C and 400 rpm, respectively, and 13.3 g L-1 sucrose was added at 24, 40 and 56 h. The temperature and stirring speed were then set at 28 °C and 600 rpm from 24 to 48 h and 28 °C and 600 rpm from 48 to 72 h, respectively. As a result, welan gum production, dry cell weight, sucrose conversion rate and viscosity were correspondingly increased to 38.60 g L-1, 5.47 g L-1, 0.64 g g-1 and 3779 mPa·s, respectively. In addition, the mechanism by which fermentation strategy promotes welan gum synthesis was investigated by transcriptome analysis. CONCLUSION: Improving respiration and ATP supply, reducing unnecessary protein synthesis, and alleviating competition between cell growth and welan gum synthesis contribute to promoting the fermentation performance of Sphingomonas sp., thus providing a practical strategy for efficient welan gum production. © 2024 Society of Chemical Industry.

Dry-fractionated protein concentrate as egg replacer in sponge cake: how the rheological properties of the batters affect the physical and structural quality of the products.

BACKGROUND: Egg replacement is a notable food trend for academics and industry. Dry-fractionated protein concentrates (DFp) are minimally processed and sustainable ingredients. DFp from chickpea, red lentil and mung bean, prepared as aqueous dispersions at 20-40% (w/w), were used to replace egg in sponge cakes. To understand the effect of DFp on the physicochemical features of sponge cakes, the batter rheological properties (i.e., flow behavior, frequency-dependent and temperature-dependent behaviors) were investigated. RESULTS: Frequency sweep revealed a higher storage modulus (G') than loss modulus (G″), indicating predominantly elastic-like behavior, dependent on the frequency. Increasing DFp content, especially at 40%, resulted in firmer batters, indicated by elevated apparent viscosity. During temperature sweep, G' increased starting from 80 °C in all DFp-based batters, indicating protein and starch conformational changes. Higher DFp content better simulated the egg behavior, affecting specific volume and thickness variation after baking but resulting in harder cakes. Crumb structure was similar to the control, highlighting that DFp can emulate the egg behavior in cake preparation. Protein content in cakes containing 30% DFp was similar to the control. However, the addition of DFp caused an increase in phytic acid. Sensory analysis of sponge cakes revealed differences in crust color, sweetness and legume flavor, with minimal effect on astringency. Chickpea and lentil DFp are suggested as preferred alternatives because of their to milder sensory impact. CONCLUSION: Overall, eggs in cake formulation can be substituted by plant-based protein produced by dry fractionation. However, further research is essential to evaluate the nutritional characteristics. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Recent advances on enhancing 3D printing quality of protein-based inks: A review.

3D printing is an additive manufacturing technology that locates constructed models with computer-controlled printing equipment. To achieve high-quality printing, the requirements on rheological properties of raw materials are extremely restrictive. Given the special structure and high modifiability under external physicochemical factors, the rheological properties of proteins can be easily adjusted to suitable properties for 3D printing. Although protein has great potential as a printing material, there are many challenges in the actual printing process. This review summarizes the technical considerations for protein-based ink 3D printing. The physicochemical factors used to enhance the printing adaptability of protein inks are discussed. The post-processing methods for improving the quality of 3D structures are described, and the application and problems of fourth dimension (4D) printing are illustrated. The prospects of 3D printing in protein manufacturing are presented to support its application in food and cultured meat. The native structure and physicochemical factors of proteins are closely related to their rheological properties, which directly link with their adaptability for 3D printing. Printing parameters include extrusion pressure, printing speed, printing temperature, nozzle diameter, filling mode, and density, which significantly affect the precision and stability of the 3D structure. Post-processing can improve the stability and quality of 3D structures. 4D design can enrich the sensory quality of the structure. 3D-printed protein products can meet consumer needs for nutritional or cultured meat alternatives.

[Study of composite mixtures based on durum wheat semolina and white beans flour for pasta production as specialized food products].

Increasing the number of chronic non-communicable diseases around the world is a critical social problem in many countries. In this regard, the creation of specialized foods that correct dysfunctions of the human body is a priority direction in science and food industry. Legumes are characterized by a high content of protein, minerals and trace elements, which determines their possible use as the main raw materials for creating specialized foods. The aim of this research was to present a medical, biological and technological justification for the possibility of producing pasta based on composite mixtures of durum wheat semolina and white bean flour as specialized foods with increased protein content and optimal mineral ratio. Material and methods. The objects of the study were grains of durum wheat (grade Krasnokutka-13), whole meal flour from white beans, composite mixtures in various percentages, and pasta from them. The nutritional and biological value of durum wheat semolina and bean flour was determined experimentally, the nutrient profile of the developed composite mixtures - by calculation. The rheological properties of dough from composite mixtures and the cooking properties of pasta made from them were assessed. Results. It has been established that increase in the proportion of white bean flour in composite mixes elevated calcium and protein content, optimized an amino acid profile, the ratio of calcium to phosphorus, significantly reduced the glycemic load. Bean flour introduction into composite mixtures positively affected the rheological properties of the dough and products from it, in particular, on the speed and energy intensity of dough kneading and aging processes of starched polysaccharides, however, lead to a decrease in dry pasta strength. The pasta made from composite mixtures meets the technological requirements for pasta in terms of a number of basic indicators, namely: the volume of dry pasta, the volume of pasta after cooking and the boilability coefficient. Conclusion. The rheological and technological properties of composite mixtures and their nutrient profile make it possible to recommend them for the production of pasta, as specialized foods.

Recent advances in natural gums as additives to help the construction and application of edible biopolymer gels: the example of hydrogels and oleogels.

Novel, innovative approaches like edible gels (hydrogels and oleogels) are important food materials with great scientific interest due to their positive impacts on structural and functional foods and other unique properties. Biopolymers (protein, starch and other polysaccharides) can be excellent and cost-effective materials for the formed edible gels. Recently, natural gums, although also as biopolymers, are preferred as additives to further improve the textural and functional properties of edible gels, which have received extensive attention. However, these studies have not been outlined in previous reviews. In this review, we highlighted the advantages of gums as additives to construct edible gels. Moreover, the various roles (including electrostatic or covalent interactions) for natural gums in regulation of food gel properties (solvent-holding and rheological properties) are highlighted. Finally, the use of natural gums as additives to improve the stability and targeted delivery of phytochemicals in food gels and their application in food systems are summarized. The information covered in this article may be useful for the design of functional foods that can better meet personalized needs of people.

Oleogels prepared with low molecular weight gelators: Texture, rheology and sensory properties, a review.

There is a growing need for healthier foods with no trans and reduced saturated fat. However, solid fats play critical roles in texture and sensory attributes of food products, making it challenging to eliminate them in foods. Recently, the concept of oleogelation as a novel oil structuring technique has received numerous attentions owing to their great potential to mimic the properties of solid fats. Understanding textural, rheological and sensory properties of oleogels helps predict the techno-functionalities of oleogels to replace solid fats in food products. This research critically reviews the textural and rheological properties of oleogels prepared by low molecular weight oleogelators (LMWGs) and functional characteristics of foods formulated by these oleogels. The mechanical properties of LMWG-containing oleogels are comprehensively discussed against conventional solid fats. The interactions between the oleogel and its surrounding food matrix are explained, and the sensory attributes of oleogel containing reformulated products are highlighted. Scientific insights into the texture and rheological properties of oleogels manufactured with a wide range of low molecular gelators and their related products are provided in order to boost their implication for creating healthier foods with high consumer acceptability. Future research opportunities on low molecular weight gelators are also discussed.