Microbial electrochemical system: an emerging technology for remediation of polycyclic aromatic hydrocarbons from soil and sediments.

Worldwide industrialization and other human activities have led to a frightening stage of release of hazardous, highly persistent, toxic, insoluble, strongly adsorbed to the soil and high molecular weight ubiquitous polycyclic aromatic hydrocarbons (PAHs) in soils and sediments. The various conventional remediation methods are being used to remediate PAHs with certain drawbacks. Time taking process, high expenditure, excessive quantities of sludge generation, and various chemical requirements do not only make these methods outdated but produce yet much resistant and toxic intermediate metabolites. These disadvantages may be overcome by using a microbial electrochemical system (MES), a booming technology in the field of bioremediation. MES is a green remediation approach that is regulated by electrochemically active microorganisms at the electrode in the system. The key advantage of the system over the conventional methods is it does not involve any additional chemicals, takes less time, and generates minimal sludge or waste during the remediation of PAHs in soils. However, a comprehensive review of the MES towards bioremediation of PAHs adsorbed in soil and sediment is still lacking. Therefore, the present review intended to summarize the recent information on PAHs bioremediation, application, risks, benefits, and challenges based on sediment microbial fuel cell and microbial fuel cell to remediate mount-up industrial sludge, soil, and sediment rich in PAHs. Additionally, bio-electrochemically active microbes, mechanisms, and future perspectives of MES have been discussed.

Simultaneous PAHs degradation, odour mitigation and energy harvesting by sediment microbial fuel cell coupled with nitrate-induced biostimulation.

The study investigates a bioremediation process of polycyclic aromatic hydrocarbons (PAHs) removal and odour mitigation combined with energy harvesting. Sediment microbial fuel cells (SMFCs) were constructed with the addition of nitrate in the sediment to simultaneously remove acid-volatile sulphide (AVS) and PAHs. With the combined nitrate-SMFC treatment, over 90% of the AVS was removed from the sediment in 6 weeks of the SMFC operation and a maximum of 94% of AVS removal efficiency was reached at Week 10. The highest removal efficiencies of phenanthrene, pyrene, and benzo[a]pyrene was 93%, 80%, and 69%, respectively. The maximum voltage attained for the combined nitrate-SMFC treatment was 341 mV. Illumina HiSeq sequencing revealed that the autotrophic denitrifiers Thiobacillus are the dominant genus. In electricity generation, both sulphide-oxidation and PAH-oxidation are the possible pathways. Besides, the addition of nitrate stimulated the growth of Pseudomonas which is responsible for the electricity generation and direct biodegradation of the PAHs, indicating a synergistic effect. The developed bioremediation process demonstrated the potential in the in-situ bioremediation process utilizing SMFC combined with nitrate-induced bioremediation.

Advances and prospects on the aquatic plant coupled with sediment microbial fuel cell system.

Energy resource scarcity and sediment pollution perniciousness have become enormous challenges, to which research has been focused on energy recovery and recycle technologies to solve both above problems. The organic matter stored in anoxic sediments of freshwater ecosystem represents a tremendous potential energy source. The system of aquatic plant coupled with sediment microbial fuel cell (AP-SMFC) has attracted much attention as a more feasible, economical and eco-friendly way to remediate sediment and surface water and generate electricity. However, the research on AP-SMFC has only been carried out in the last decade, and relevant studies have not been well summarized. In this review, the advances and prospects on AP-SMFC were systematically introduced. Firstly, the annual publication counts and keywords co-occurrence cluster of AP-SMFC were identified and visualized by resorting to the CiteSpace software, and the result showed that the research on AP-SMFC increased significantly in the last decade on the whole and will continue to increase. The bibliometric results provided valuable references and information on potential research directions for future studies. And then, the research progress and reaction mechanism of AP-SMFC were systematically described. Thirdly, the performance of AP-SMFC, including nutrients removal, organic contaminants removal, and electricity generation, was systematically summarized. AP-SMFC can enhance the removal of pollutants and electricity generation compared with SMFC without AP, and is considered to be an ideal technology for pollutants removal and resource recovery. Finally, the current challenges and future perspectives were summarized and prospected. Therefore, the review could serve as a guide for the new entrants to the field and further development of AP-SMFC application.

Assessment of the performance of SMFCs in the bioremediation of PAHs in contaminated marine sediments under different redox conditions and analysis of the associated microbial communities.

The biodegradation of naphthalene, 2-methylnaphthalene and phenanthrene was evaluated in marine sediment microbial fuel cells (SMFCs) under different biodegradation conditions, including sulfate reduction as a major biodegradation pathway, employment of anode as terminal electron acceptor (TEA) under inhibited sulfate reducing bacteria activity, and combined sulfate and anode usage as electron acceptors. A significant removal of naphthalene and 2-methylnaphthalene was observed at early stages of incubation in all treatments and was attributed to their high volatility. In the case of phenanthrene, a significant removal (93.83±1.68%) was measured in the closed circuit SMFCs with the anode acting as the main TEA and under combined anode and sulfate reduction conditions (88.51±1.3%). A much lower removal (40.37±3.24%) was achieved in the open circuit SMFCs operating with sulfate reduction as a major biodegradation pathway. Analysis of the anodic bacterial community using 16S rRNA gene pyrosequencing revealed the enrichment of genera with potential exoelectrogenic capability, namely Geoalkalibacter and Desulfuromonas, on the anode of the closed circuit SMFCs under inhibited SRB activity, while they were not detected on the anode of open circuit SMFCs. These results demonstrate the role of the anode in enhancing PAHs biodegradation in contaminated marine sediments and suggest a higher system efficiency in the absence of competition between microbial redox processes (under SRB inhibition), namely due to the anode enrichment with exoelectrogenic bacteria, which is a more energetically favorable mechanism for PAHs oxidation than sulfate.

Using sediment microbial fuel cells (SMFCs) for bioremediation of polycyclic aromatic hydrocarbons (PAHs).

In this study, a sediment microbial fuel cell (SMFC) was explored to bioremediate polycyclic aromatic hydrocarbons (PAHs) in water originated from soil. The results showed consistent power generations of 6.02±0.34 and 3.63±0.37 mW/m(2) under an external resistance of 1500 Ω by the aerobic and anaerobic SMFC, respectively. Although the power generations were low, they had relatively low internal resistances (i.e., 436.6±69.4 and 522.1±1.8 Ω for the aerobic and anaerobic SMFC, respectively) in comparison with the literature. Nevertheless, the significant benefit of this system was its bioremediation capabilities, achieving 41.7%, 31.4% and 36.2% removal of naphthalene, acenaphthene and phenanthrene, respectively, in the aerobic environment and 76.9%, 52.5% and 36.8%, respectively, in the anaerobic environment. These results demonstrated the ability of SMFCs in stimulating microorganisms for bioremediation of complex and recalcitrant PAHs.