SLERT Regulates DDX21 Rings Associated with Pol I Transcription.

Dysregulated rRNA synthesis by RNA polymerase I (Pol I) is associated with uncontrolled cell proliferation. Here, we report a box H/ACA small nucleolar RNA (snoRNA)-ended long noncoding RNA (lncRNA) that enhances pre-rRNA transcription (SLERT). SLERT requires box H/ACA snoRNAs at both ends for its biogenesis and translocation to the nucleolus. Deletion of SLERT impairs pre-rRNA transcription and rRNA production, leading to decreased tumorigenesis. Mechanistically, SLERT interacts with DEAD-box RNA helicase DDX21 via a 143-nt non-snoRNA sequence. Super-resolution images reveal that DDX21 forms ring-shaped structures surrounding multiple Pol I complexes and suppresses pre-rRNA transcription. Binding by SLERT allosterically alters individual DDX21 molecules, loosens the DDX21 ring, and evicts DDX21 suppression on Pol I transcription. Together, our results reveal an important control of ribosome biogenesis by SLERT lncRNA and its regulatory role in DDX21 ring-shaped arrangements acting on Pol I complexes.

Noncoding snoRNA host genes are a distinct subclass of long noncoding RNAs.

Mammalian genomes are pervasively transcribed into different noncoding (nc)RNA classes, each one with its own hallmarks and exceptions. Some of them are nested into each other, such as host genes for small nucleolar RNAs (snoRNAs), which were long believed to simply act as molecular containers strictly facilitating snoRNA biogenesis. However, recent findings show that noncoding snoRNA host genes (ncSNHGs) display features different from those of 'regular' long ncRNAs (lncRNAs) and, more importantly, they can exert independent and unrelated functions to those of the encoded snoRNAs. Here, we review and summarize past and recent evidence that ncSNHGs form a defined subclass among the plethora of lncRNAs, and discuss future research that can further elucidate their biological relevance.

Chemically coupling SnO2 quantum dots and MXene for efficient CO2 electroreduction to formate and Zn-CO2 battery.

Electrochemical conversion of CO2 into formate is a promising strategy for mitigating the energy and environmental crisis, but simultaneously achieving high selectivity and activity of electrocatalysts remains challenging. Here, we report low-dimensional SnO2 quantum dots chemically coupled with ultrathin Ti3C2Tx MXene nanosheets (SnO2/MXene) that boost the CO2 conversion. The coupling structure is well visualized and verified by high-resolution electron tomography together with nanoscale scanning transmission X-ray microscopy and ptychography imaging. The catalyst achieves a large partial current density of -57.8 mA cm-2 and high Faradaic efficiency of 94% for formate formation. Additionally, the SnO2/MXene cathode shows excellent Zn-CO2 battery performance, with a maximum power density of 4.28 mW cm-2, an open-circuit voltage of 0.83 V, and superior rechargeability of 60 h. In situ X-ray absorption spectroscopy analysis and first-principles calculations reveal that this remarkable performance is attributed to the unique and stable structure of the SnO2/MXene, which can significantly reduce the reaction energy of CO2 hydrogenation to formate by increasing the surface coverage of adsorbed hydrogen.

Compositional Engineering of Cu-Doped SnO Film for Complementary Metal Oxide Semiconductor Technology.

Metal oxide semiconductor (MOS)-based complementary thin-film transistor (TFT) circuits have broad application prospects in large-scale flexible electronics. To simplify circuit design and increase integration density, basic complementary circuits require both p- and n-channel transistors based on an individual semiconductor. However, until now, no MOSs that can simultaneously show p- and n-type conduction behavior have been reported. Herein, we demonstrate for the first time that Cu-doped SnO (Cu:SnO) with HfO2 capping can be employed for high-performance p- and n-channel TFTs. The interstitial Cu+ can induce an n-doping effect while restraining electron-electron scatterings by removing conduction band minimum degeneracy. As a result, the Cu3 atom %:SnO TFTs exhibit a record high electron mobility of 43.8 cm2 V-1 s-1. Meanwhile, the p-channel devices show an ultrahigh hole mobility of 2.4 cm2 V-1 s-1. Flexible complementary logics are then established, including an inverter, NAND gates, and NOR gates. Impressively, the inverter exhibits an ultrahigh gain of 302.4 and excellent operational stability and bending reliability.

Artificial Synapse Based on a δ-FAPbI3/Atomic-Layer-Deposited SnO2 Bilayer Memristor.

Halide perovskite-based resistive switching memory (memristor) has potential in an artificial synapse. However, an abrupt switch behavior observed for a formamidinium lead triiodide (FAPbI3)-based memristor is undesirable for an artificial synapse. Here, we report on the δ-FAPbI3/atomic-layer-deposited (ALD)-SnO2 bilayer memristor for gradual analogue resistive switching. In comparison to a single-layer δ-FAPbI3 memristor, the heterojunction δ-FAPbI3/ALD-SnO2 bilayer effectively reduces the current level in the high-resistance state. The analog resistive switching characteristics of δ-FAPbI3/ALD-SnO2 demonstrate exceptional linearity and potentiation/depression performance, resembling an artificial synapse for neuromorphic computing. The nonlinearity of long-term potentiation and long-term depression is notably decreased from 12.26 to 0.60 and from -8.79 to -3.47, respectively. Moreover, the δ-FAPbI3/ALD-SnO2 bilayer achieves a recognition rate of ≤94.04% based on the modified National Institute of Standards and Technology database (MNIST), establishing its potential in an efficient artificial synapse.

Macroporous Structures of Nb-SnO2 Particles as a Catalyst Support Induce High Porosity and Performance in Polymer Electrolyte Fuel Cell Catalyst Layers.

Macroporous niobium-doped tin oxide (NTO) is introduced as a robust alternative to conventional carbon-based catalyst supports to improve the durability and performance of polymer electrolyte fuel cells (PEFCs). Metal oxides like NTO are more stable than carbon under PEFC operational conditions, but they can compromise gas diffusion and water management because of their denser structures. To address this tradeoff, we synthesized macroporous NTO particles using a flame-assisted spray-drying technique employing poly(methyl methacrylate) as a templating agent. X-ray diffraction analysis and scanning electron microscopy confirmed the preservation of crystallinity and revealed a macroporous morphology with larger pore volumes and diameters than those in flame-made NTO nanoparticles, as revealed by mercury porosimetry. The macroporous NTO particles exhibited enhanced maximum current density and reduced gas diffusion resistance relative to commercial carbon supports. Our findings establish a foundation for integrating macroporous NTO structures into PEFCs to optimize durability and performance.

Vertically Integrated Monolithic Neuromorphic Nanowire Device for Physiological Information Processing.

This study demonstrates the conceptual design and fabrication of a vertically integrated monolithic (VIM) neuromorphic device. The device comprises an n-type SnO2 nanowire bottom channel connected by a shared gate to a p-type P3HT nanowire top channel. This architecture establishes two distinct neural pathways with different response behaviors. The device generates excitatory and inhibitory postsynaptic currents, mimicking the corelease mechanism of bilingual synapses. To enhance the signal processing efficiency, we employed a bipolar spike encoding strategy to convert fluctuating sensory signals to spike trains containing positive and negative pulses. Utilizing the neuromorphic platform for synaptic processing, physiological signals featuring bidirectional fluctuations, including electrocardiogram and breathing signals, can be classified with an accuracy of over 90%. The VIM device holds considerable promise as a solution for developing highly integrated neuromorphic hardware for healthcare and edge intelligence applications.

Liquid Metal Doping Induced Asymmetry in Two-Dimensional Metal Oxides.

The emergence of ferroelectricity in two-dimensional (2D) metal oxides is a topic of significant technological interest; however, many 2D metal oxides lack intrinsic ferroelectric properties. Therefore, introducing asymmetry provides access to a broader range of 2D materials within the ferroelectric family. Here, the generation of asymmetry in 2D SnO by doping the material with Hf0.5Zr0.5O2 (HZO) is demonstrated. A liquid metal process as a doping strategy for the preparation of 2D HZO-doped SnO with robust ferroelectric characteristics is implemented. This technology takes advantage of the selective interface enrichment of molten Sn with HZO crystallites. Molecular dynamics simulations indicate a strong tendency of Hf and Zr atoms to migrate toward the surface of liquid metal and embed themselves within the growing oxide layer in the form of HZO. Thus, the liquid metal-based harvesting/doping technique is a feasible approach devised for producing novel 2D metal oxides with induced ferroelectric properties, represents a significant development for the prospects of random-access memories.

Naphthalene Diimide-Modified SnO2 Enabling Low-Temperature Processing for Efficient ITO-Free Flexible Perovskite Solar Cells.

A low-cost and indium-tin-oxide (ITO)-free electrode-based flexible perovskite solar cell (PSC) that can be fabricated by roll-to-roll processing shall be developed for successful commercialization. High processing temperatures present a challenge for the PSC fabrication on flexible substrates. The most efficient planar n-i-p PSC structures, which utilize a metal oxide as an electron transport layer (ETL), necessitate high annealing temperatures. In addition, the device performance deteriorates owing to the migration of halogen ions, which causes the oxidation of the metal electrodes. These drawbacks conflict with the development of highly efficient flexible PSCs fabricated on ITO-free transparent electrodes. Herein, an efficient ETL material that enables low-temperature processing is presented. Tin dioxide (SnO2) is modified by (sulfobetaine-N,N-dimethylamino)propyl naphthalene diimide (NDI-B) and used as an ETL. The NDI-B effectively reduces the interfacial nonradiative recombination between the ETL and perovskite and suppresses the ion migration by passivating oxygen-vacancy defects in SnO2 and strongly interacting with halogen ions, respectively. Based on the NDI-B-blended SnO2 ETL, a record PCE of 17.48% is achieved in the ITO-free flexible PSC fabricated at low temperature.

Experimental and Computational Study Toward Identifying Active Sites of Supported SnOx Nanoparticles for Electrochemical CO2 Reduction Using Machine-Learned Interatomic Potentials.

SnOx has received great attention as an electrocatalyst for CO2 reduction reaction (CO2RR), however; it still suffers from low activity. Moreover, the atomic-level SnOx structure and the nature of the active sites are still ambiguous due to the dynamism of surface structure and difficulty in structure characterization under electrochemical conditions. Herein, CO2RR performance is enhanced by supporting SnO2 nanoparticles on two common supports, vulcan carbon and TiO2. Then, electrolysis of CO2 at various temperatures in a neutral electrolyte reveals that the application window for this catalyst is between 12 and 30 °C. Furthermore, this study introduces a machine learning interatomic potential method for the atomistic simulation to investigate SnO2 reduction and establish a correlation between SnOx structures and their CO2RR performance. In addition, selectivity is analyzed computationally with density functional theory simulations to identify the key differences between the binding energies of *H and *CO2 -, where both are correlated with the presence of oxygen on the nanoparticle surface. This study offers in-depth insights into the rational design and application of SnOx-based electrocatalysts for CO2RR.

Interfacial Accumulation and Stability Enhancement Effects Triggered by Built-in Electric Field of SnO2/LaOCl Nanofibers Boost Carbon Dioxide Electroreduction.

Constructing a built-in interfacial electric field (BIEF) is an effective approach to enhance the electrocatalysts performance, but it has been rarely demonstrated for electrochemical carbon dioxide reduction reaction (CO2RR) to date. Herein, for the first time, SnO2/LaOCl nanofibers (NFs) with BIEF is created by electrospinning, exhibiting a high Faradaic efficiency (FE) of 100% C1 product (CO and HCOOH) at -0.9--1.1 V versus reversible hydrogen electrode (RHE) and a maximum FEHCOOH of 90.1% at -1.2 VRHE in H-cell, superior to the commercial SnO2 nanoparticles (NPs) and LaOCl NFs. SnO2/LaOCl NFs also exhibit outstanding stability, maintaining negligible activity degradation even after 10 h of electrolysis. Moreover, their current density and FEHCOOH are almost 400 mA cm-2 at -2.31 V and 83.4% in flow-cell. The satisfactory CO2RR performance of SnO2/LaOCl NFs with BIEF can be ascribed to tight interface of coupling SnO2 NPs and LaOCl NFs, which can induce charge redistribution, rich active sites, enhanced CO2 adsorption, as well as optimized Gibbs free energy of *OCHO. The work reveals that the BIEF will trigger interfacial accumulation and stability enhancement effects in promoting CO2RR activity and stability of SnO2-based materials, providing a novel approach to develop stable and efficient CO2RR electrocatalysts.

Orientation Manipulation and Defect Passivation for Perovskite Solar Cells by a Natural Compound.

Different facets in perovskite crystals exhibit distinct atomic arrangements, influencing their electronic, physical, and chemical properties. Perovskite films incorporating tin oxide (SnO2) as the electron transport layer face challenges in facet regulation. This study reveals that tea saponin (TS), a natural compound serves as a SnO2 modifier, facilitates optimal growth of perovskite crystals on the (111) facet. The modification promotes preferential crystal orientation through hydrogen bond and Lewis coordination. TS forms a chelate with SnO2, resulting in a smoother film and n-type doping, leading to improved carrier extraction and reduced defects. The TS-modified perovskite solar cells achieve a champion efficiency of 24.2%, leveraging from an obvious enhancement of open-circuit voltage (Voc) of 1.18 V and fill factor (FF) of 82.8%. The devices also demonstrate enhanced humidity tolerance and storage stability, ensuring improved stability without encapsulation.

Controlled Synthesis of SnO2 Nanostructures as Alloy Anode via Restricted Potential Toward Building High-Performance Dual-Ion Batteries with Graphite Cathode.

Dual-ion batteries (DIBs) are considered one of the promising energy storage devices in which graphite serves as a bi-functional electrode, i.e., anode and cathode in the aprotic organic solvents. Unlike conventional lithium-ion batteries (LIBs), DIBs reversibly store the cations and anions in the anode and cathodes during redox reactions, respectively. The electrolyte is a source for both cations and anions, so the choice of electrolyte plays a vital role. In the present work, the synthesis of SnO2 nanostructures is reported as a possible alternative for graphite anode, and the Li-storage performance is optimized in half-cell (Li/SnO2 ) assembly with varying amounts of conductive additive (acetylene black) and limited working potential (1 V vs Li). Finally, a DIB using recovered graphite (RG) fabricated from spent LIB as a cathode and SnO2 nanostructures as an anode under balanced loading conditions. Prior to the fabrication, both electrodes are pre-cycled to eliminate irreversibility. An in-situ impedance study has been employed to validate the passivation layer formation during the charge-discharge process. The high-performance SnO2 /RG-based DIB delivered a maximum discharge capacity of 380 mAh g-1 . The electrochemical performance of DIB has been assessed by varying temperature conditions to evaluate their suitability in different climatic conditions.

Choline Derivative as a Multifunctional Interfacial Bridge through Synergistic Effects for Improving the Efficiency and Stability of Perovskite Solar Cells.

The interfacial carrier non-radiative recombination caused by buried defects in electron transport layer (ETL) material and the energy barrier severely hinders further improvement in efficiency and stability of perovskite solar cells (PSCs). In this study, the effect of the SnO2 ETL doped with choline chloride (CC), acetylcholine chloride (AC), and phosphocholine chloride sodium salt (PCSS) are investigated. These dopants modify the interface between SnO2 ETL and perovskite layer, acting as a bridge through synergistic effects to form uniform ETL films, enhance the interface contact, and passivate defects. Ultimately, compared with CC (which with ─OH) and AC (which with C═O), the PCSS with P═O and sodium ions groups is more beneficial for improving performance. The device based on PCSS-doped SnO2 ETL achieves an efficiency of 23.06% with a high VOC of 1.2 V, which is considerably higher than the control device (20.55%). Moreover, after aging for 500 h at a temperature of 25 °C and relative humidity (RH) of 30-40%, the unsealed device based on SnO2-PCSS ETL maintains 94% of its initial efficiency, while the control device only 80%. This study provides a meaningful reference for the design and selection of ideal pre-buried additive molecules.

An Efficient MnO2 Photocathode with an Excellent SnO2 Electron Transport Layer for Photo-Accelerated Zinc Ion Batteries.

Photo-accelerated rechargeable batteries play a crucial role in fully utilizing solar energy, but it is still a challenge to fabricate dual-functional photoelectrodes with simultaneous high solar energy harvesting and storage. This work reports an innovative photo-accelerated zinc-ion battery (PAZIB) featuring a photocathode with a SnO2@MnO2 heterojunction. The design ingeniously combines the excellent electronic conductivity of SnO2 with the high energy storage and light absorption capacities of MnO2. The capacity of the SnO2@MnO2-based PAZIB is ≈598 mAh g-1 with a high photo-conversion efficiency of 1.2% under illumination at 0.1 A g-1, which is superior to that of most reported MnO2-based ZIB. The boosting performance is attributed to the synergistic effect of enhanced photogenerated carrier separation efficiency, improved conductivity, and promoted charge transfer by the SnO2@MnO2 heterojunction, which is confirmed by systematic experiments and theoretical simulations. This work provides valuable insights into the development of dual-function photocathodes for effective solar energy utilization.

Thermoelectric Performance of Hybrid Inorganic/Organic Composites Based on PEDOT:PSS/Tin(II) Oxide.

PEDOT: PSS(poly(3,4-ethylenedioxylthiophene):poly(styrenesulfonate))-based composites often exhibit remarkable characteristics regarding high electrical conductivity and great processability, being a suitable candidate for thermoelectric (TE) applications. To increase its performance, PEDOT:PSS is commonly blended with scarce and toxic inorganic compounds based on Se, Te or Bi. In this work we propose the use of one p-type metal oxide semiconductor (MOs): tin(II) oxide (SnO), motivated by its abundance and low toxicity. Hybrid PEDOT:PSS/SnO composites were obtained by firstly blending Ethylene glycol (EG) with PEDOT:PSS and then by adding p-type SnO, previously synthesized by a chemical route. The mixture was deposited via spin-coating onto glass substrates. The Power Factor (PF) of the composites increased by a factor of 300 with the combined EG/SnO composition.

In Situ Fabrication of SnO2 Nanowalls for Robust Acetylene Sensing at Low Temperature.

Acetylene (C2 H2 ) monitoring in real time and online is essential for erasing transformer risks and guaranteeing normal equipment operation and operator safety. This study examines the direct fabrication of ultrathin SnO2 nanowalls on Ag-Pd substrates using a simple solvothermal method that doesn't demand the use of any additional motivators or templates. The thickness and shape of the nanowalls can be controlled by varying the cetyl trimethyl ammonium bromide (CTAB) concentration in the solvent. As observed, the gas sensor (SnO2 -3) fabricated by 2.4 g CTAB exhibits superior gas-sensing features. This is primarily due to the hollow structure constructed by the arrangement of nanowalls, which delivers not only enough gas diffusion pathways but also enough reaction sites during the gas sensing processes. The findings suggest that low-cost SnO2 nanowalls created using a straightforward procedure could be taken into consideration as prospective candidates for use in industrial C2 H2 sensing applications.

SnO2/SnS heterojunction anchoring on CMK-3 mesoporous network improves the reversibility of conversion reaction for lithium/sodium ions storage.

Tin oxide-based (SnO2) materials show high theoretical capacity for lithium and sodium storage benefiting from a double-reaction mechanism of conversion and alloying reactions. However, due to the limitation of the reaction thermodynamics and kinetics, the conversion reaction process of SnO2usually shows irreversibility, resulting in serious capacity decay and hindering the further application of the SnO2anode. Herein, SnO2/SnS heterojunction was anchored on the surface and inside of CMK-3 byinsitusynthesis method, forming a stable 3D structural material (SnO2/SnS@CMK-3). The electrochemical properties of SnO2/SnS@CMK-3 composite show high capacity and reversible conversion reaction, which was attributed to the synergistic effect of CMK-3 and SnO2/SnS heterojunction. To further investigate the influence of the heterojunction on the reversibility of the conversion reaction, the Gibbs free energy (ΔG) was calculated using density functional theory. The results show that SnO2/SnS heterojunction has a closer to zero ΔGfor lithium/sodium ion batteries compared to SnO2, indicating that the heterojunction enhances the reversibility of the conversion reaction in chemical reaction thermodynamics. Our work provides insights into the reversibility of the conversion reaction of SnO2-based materials, which is essential for improving their electrochemical performance.

Doped SnO2thin films fabricated at low temperature by atomic layer deposition with a precise incorporation of niobium atoms.

Nb-doped SnO2(NTO) thin films were synthesized by atomic layer deposition technique at low temperature (100 °C). For an efficient incorporation of the Nb atoms, i.e. fine control of their amount and distribution, various supercycle ratios and precursor pulse sequences were explored. The thin film growth process studied byin-situQCM revealed that the Nb incorporation is highly impacted by the surface nature as well as the amount of species available at the surface. This was confirmed by the actual concentration of the Nb atom incorporated inside the thin film as determined by XPS. Highly transparent thin films which transmit more than 95% of the AM1.5 global solar irradiance over a wide spectral range (300-1000 nm) were obtained. In addition, the Nb atoms influenced the optical band gap, conduction band, and valence band levels. While SnO2thin film were too resistive, films tuned to conductive nature upon Nb incorporation with controlled concentration. Optimal incorporation level was found to be ⩽1 at.% of Nb, and carrier concentration reached up 2.5 × 1018cm-3for the as-deposited thin films. As a result, the high optical transparency accompanied with tuned electrical property of NTO thin films fabricated by ALD at low temperature paves the way for their integration into temperature-sensitive, nanostructured optoelectrical devices.

Chemical bath deposition of SnO2films on PEN/ITO substrates for efficient flexible perovskite solar cells.

Flexible perovskite solar cells (f-PSCs) have achieved significant success. However, high-quality tin dioxide (SnO2) electron transport layers (ETLs) fabricated via chemical bath deposition (CBD) have not been achieved on flexible PEN/ITO substrates. This limitation is primarily due to the corrosion of the poor-quality ITO layer by the strongly acidic CBD solution. Here, we analyzed the reasons for the poor corrosion resistance of ITO films on PEN substrate from multiple perspectives, such as element composition, microstructure, and crystallinity. Then, we proposed a modified CBD method for SnO2films suitable for flexible PEN/ITO substrates. We employed SnCl2·2H2O as the tin source and regulated the pH of the CBD solution by NH3·H2O, which effectively avoided the corrosion of the ITO layer by the CBD solution and achieved high-quality SnO2films on the ITO layers. Compared to the commercial SnO2dispersion, the SnO2films prepared by this method have smaller grains and higher transmittance. As a result, we achieved an unprecedented power conversion efficiency (PCE) of 20.71% for f-PSCs fabricated on PEN/ITO substrates with SnO2ETLs by CBD method. This breakthrough facilitates the development of high-performance f-PSCs by a low-cost and large-scale chemical bath deposition of high-quality ETLs on flexible substrates.