[Determination of organophosphorus pesticide residues in milk of cows and sheep by ultra-high-performance liquid chromatography- tandem mass spectrometry combined with passing type purification method].

OBJECTIVE: A method for the rapid determination of dichlorvos, trichlorfon, fenthion, fenthion-sulfone, fenthion-sulfoxide, fenthion-oxon, fenthion-oxon-sulfone, fenthion-oxon-sulfoxide, phoxim, propetamphos, malathion, diazinon and coumaphos 13 common organophosphorus pesticides and their metabolites poison residues in milk of cows and sheep by ultra-high-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) with passing type solid phase extraction(SPE) purification was developed. METHODS: After centrifugation at 4 ℃, the milk was purified by passing type SPE with acetonitrile precipitating protein and determined by UPLC-MS/MS in electrospray positive ion mode(ESI+) and multi-reaction monitoring scanning(MRM), external standard method for quantitative analysis with matrix matching standard curve. RESULTS: The recoveries of 13 target compounds were between 81.5% and 107.5% and relative standard deviation was between 1.24% and 6.23% at three spiked levels of 5, 10, 20 µg/L. The detection limits of 13 target compounds were between 0.015 and 0.15 µg/L, and the quantitative limits were between 0.05 and 0.50 µg/L. No organophosphorus pesticide residues were detected in 20 samples of cows and sheep milk. CONCLUSION: The method has the advantages of good linear independence, low detection limit, high precision and accuracy, and can be used for daily monitoring of milk and related products.

[Simultaneous determination of 16 polycyclic aromatic hydrocarbons in source water and tap water by performance liquid chromatography with ultraviolet detector tandem fluorescence detector combined with solid phase extraction].

OBJECTIVE: To establish a rapid method for simultaneous determination of 16 polycyclic aromatic hydrocarbons(PAHs) in source water and tap water by performance liquid chromatography(HPLC) with ultraviolet detector(UV) tandem fluorescence detector(FLR). METHODS: Source water was filtered by GF/C glass fiber filters and tap water were added ascorbic acid of 60 mg per liter to remove the residual chlorine when sampling. 500 mL water sample were sampled and adjusted pH 2 with phosphoric acid, then 10 mL methanol were added. Then samples were concentrated by styrene stilbene polymer solid phase extraction column, after loading samples, 50 percent methanol aqueous solution adjust pH 2 were used for washing bottle and the washed solution were continuum loaded. Then 80 percent methanol aqueous solution was used for removing impurity interference and elution with dichloromethane. The eluent was nitrogen blow to near dry after adding 100 µL 10 percent tween-20 methanol solutions(m/V). Acetonitrile was used for reconstitution, and then separated by PAH chromatography column using acetonitrile and pure water at gradient elution, and detected by UV tandem FLR detector. RESULTS: The linear ranges of 16 PAHs were 0. 5 to 500 ng/mL and the correlation coefficients were greater than 0. 999. The method detection limit and limits of quantification were 0. 3 to 5. 0 ng/L and 1. 2 to 20. 0 ng/L, respectively. The recoveries were in the range of 67. 2%-114. 1% with the relative standard deviations ranging from 1. 5%-14. 0%(n=6). Then the established method was used for the determination of 17 water samples, 8 kinds, 6 kinds and 7 kinds of PAHs were detected in source water, tap water and pipe net tap water, respectively. CONCLUSION: The method is rapid, sensitive and selective, and has been successfully applied for determination of 16 PAHs in source water and tap water.

[Determination of 4 kinds of plant growth regulator in bean sprout by solid phase extraction column coupled with ultra-high performance liquid chromatography].

OBJECTIVE: A method for the determination of 6-benzylaminopurine( 6-BAP), isopentennyladenine( z-IP), 4-fluorophenoxyacetic acid( 4-FPA), 4-chlorophenoxyacetic acid( 4-CPA) in bean sprout was developed using solid phase extraction column with ultra-high performance liquid chromatography. METHODS: The sample was extracted by acetonitrile,dehydrated by salt,then centrifugation,and purified by PXC/PWA solid phase extraction column. The chromatographic analysis was carried out on C18 chromatographic column( 100 mm ×2. 1 mm,1. 8 µm),acetonitrile and sodium dihydrogen phosphate for gradient elution,diode array detector for detection,and quantified with external standard method. RESULTS: The calibration curves showed good linearity in the range of 0. 25-25 µg/mL( 6-BAP and z-IP) and 0. 50-50 µg/mL( 4-FPA and 4-CPA) with correlation coefficients greater than 0. 999. Three levels spiked recoveries were carried out using blank bean sprout extraction as substrate,the recoveries ranged from70. 0% to 96. 4%,and the relative standard deviations( RSDs) ranged from 2. 84% to12. 10%( n = 6). The qualitative limits of detections were 0. 0082-0. 075 mg/kg and the quantitative limits were 0. 027-0. 25 mg/kg for the 4 PGRs. CONCLUSION: The method is simple and easy to operate using solid phase extraction column coupled,simultaneous determination of 4 PGRs by ultra-high performance liquid chromatography,can ensure the corresponding accuracy,sensitivity and precision.

Controllable synthesis of uniform large-sized spherical covalent organic frameworks for facile sample pretreatment and as naked-eye indicator.

The successful application of covalent organic frameworks (COFs) depends on not only their unique chemical structures but also their morphology, size, and architecture. Spherical COFs (SCOFs) are attracted special attention due to the superiority of spherical materials in many applications. However, the synthesis of uniform large-sized SCOFs remains a challenge. Herein, by carefully optimizing the synthesis of a heteropore COF, we find that solvent type and catalyst concentration play important roles in determining the morphology and size of COFs, and eventually achieve the controllable synthesis of large SCOFs with uniform sizes ranging from 200 µm to 5 mm. The obtained SCOFs keep the dual-pore feature of the heteropore COF and show good stability and high crystallinity. To exhibit the superior application potential of SCOFs, the SCOFs with a size range of 200-300 µm were demonstrated to be promising solid-phase extraction (SPE) fillers. As-prepared SCOFs-packed SPE column could effectively remove ≥99% phytochrome matrix from 6 different vegetable samples in 10 s, accompanied by 72.56-112.37% recoveries of 33 chemical hazards with different physicochemical properties, thus showing greatly promising application prospects in sample pretreatment of nontargeted food safety analysis. By utilizing acid/base-adjusted reversible color change, millimeter-sized SCOFs were developed as an easy-to-operate and reusable naked-eye indicator of acids.

[Design and application of special solid phase extraction column for three cannabinol compounds in hemp].

Cannabidiol (CBD), cannabinol (CBN), and Δ9-tetrahydrocannabinol (THC) are the most important components of hemp, whose concentrations determine the properties and applications of hemp. Hemp contains a large number of impurities, which must be removed from the extracting solution before determining the cannabinol contents by ultra-high performance liquid chromatography (UHPLC). Neutral alumina, magnesium silicate, and graphitized carbon black have different surface characteristics when used as adsorbents. The removal rates of pigments, total sugar, total fatty acid glyceride, and metal ions as well as the recoveries of the three cannabinols in the extraction solution were evaluated. The amounts of neutral alumina, magnesium silicate, and graphitized carbon black were 1.80 g, 0.15 g, and 0.05 g, respectively. The three adsorbents were mixed well and packed into a polypropylene pipe to prepare a special 2 g/6 mL solid phase extraction (SPE) column for determining the three cannabinol compounds in hemp. The chemical components of the hemp flowers and leaves were extracted with an ethyl acetate/methanol (9∶1, v/v) mixture. After the extracting solution was allowed to pass through the SPE column, the recoveries of CBD, CBN, and Δ9-THC were 98.9%, 95.7%, and 99.2%, respectively. The removal rates of xanthophyll, chlorophyll a, and chlorophyll were 96.3%, 99.2%, and 95.5%, respectively. The removal rates of total sugar, total fatty glyceride, and metal ions were 98.5%, 96.9%, and 85.4%, respectively. In this study, the chromatographic conditions for analyzing the three cannabinol compounds were optimized. The cannabinol compounds were separated within 10 min on an Eclipse Plus C18 column (50 mm×2.1 mm, 1.8 µm) using a mobile phase consisting of 1% (v/v) acetic acid and acetonitrile (30∶70, v/v) at a flow rate of 0.5 mL/min. The detection wavelength was set at 210 nm with a diode array detector, and the sample injection volume was 1 µL. Good linear relationships were observed between the mass peak areas and mass concentrations of CBD, CBN, and Δ9-THC in the range of 0.5-50 mg/L. The corresponding correlation coefficients (R2) were 0.9983, 0.9995, and 0.9981, while the detection limits were 0.45 µg/L, 0.53 µg/L, and 0.38 µg/L. The recoveries of CBD, CBN, and Δ9-THC were 90.3%-96.9%, 93.7%-95.6%, and 90.8%-96.1%, with relative standard deviations (RSDs) of 2.2%-6.1%, 4.1%-8.0%, and 2.4%-4.8%, respectively. The results were satisfactory, demonstrating that the special SPE column made of neutral alumina, magnesium silicate, and graphitized carbon black was well suited for the determination of the three cannabinol compounds in hemp.

1H NMR-based metabolomic analysis coupled with reversed-phase solid-phase extraction for sample preparation of Saposhnikovia roots and related crude drugs.

1H NMR-based metabolomics has been applied in research on food, herbal medicine, and natural products. Although excellent results were reported, samples were directly extracted with a deuterated solvent (e.g., methanol-d4 or D2O) in most reports. As primary metabolites account for most of the results, data for secondary metabolites are partially reflected. Consequently, secondary metabolites tend to be excluded from factor loading analysis, serving as a significant unfavorable feature of 1H NMR-based metabolomics when investigating biologically active or functional components in natural products and health foods. Reversed-phase solid-phase extraction column (RP-SPEC) was applied for sample preparation in 1H NMR-based metabolomics to overcome this feature. The methanol extract from Saposhnikoviae radix (SR), an important crude drug, was fractionated with RP-SPEC into 5% methanol-eluting fractions, and the remaining fraction was collected. Each fraction was subjected to 1H NMR-based metabolomics and compared to results from conventional 1H NMR-based metabolomics. Based on principal component analysis (PCA) and partial least squares projections to latent structures discriminant analysis (PLS-DA), the 5% methanol fraction and conventional method reflected the amount of saccharides such as sucrose on the PC1/PLS1 axes, and wild and cultivated samples were discriminated along those axes. The remaining fraction clearly distinguished SR from Peucedanum ledebourielloides root. The compounds responsible for this discrimination were deemed falcarindiol derivatives and other unidentified secondary metabolites from the s-plot on PLS-DA. The secondary metabolites from original plants were, therefore, presumed to be concentrated in the remaining fraction by RP-SPEC treatment and strongly reflected the species differences. The developed series is considered effective to perform quality evaluation of crude drugs and natural products.

[Determination of sedative and ß-receptor hormone residues in feed by ultra high performance liquid chromatography-tandem mass spectrometry].

An analysis and detection method for eight sedatives and fifteen ß-receptor hormones in feed was established by ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The sample was extracted with acetonitrile-1% (v/v) trichloroacetic acid aqueous solution (7:3, v/v), and purified by cationic solid phase extraction column. The extracts were separated on an Agilent Zorbax Eclipse Plus C18 chromatographic column (100 mm×3.0 mm, 1.8 µm) and then quantified via internal standard method. The results showed that the linear relationships of the 23 targets were good in the range of 2.0-200.0 µg/L (r2> 0.99). The average recoveries of the targets spiked in the matrix of feed samples were within 75.1%-102.4% in three spiked levels of 5.0, 10, 50 µg/kg, and the relative standard deviations (RSDs) were within 4.3%-14.3% (n=6). This method with high purification efficiency and extensive scope of application can be applied to screening and detecting sedatives and ß -receptor hormones in feed.

Combining Pickering Emulsion Polymerization with Molecular Imprinting to Prepare Polymer Microspheres for Selective Solid-Phase Extraction of Malachite Green.

Malachite green (MG) is currently posing a carcinogenic threat to the safety of human lives; therefore, it is highly desirable to develop an effective method for fast trace detection of MG. Herein, for the first time, this paper presents a systematic study on polymer microspheres, being prepared by combined Pickering emulsion polymerization and molecular imprinting, to detect and purify MG. The microspheres, molecularly imprinted with MG, show enhanced adsorption selectivity to MG, despite a somewhat lowered adsorption capacity, as compared to the counterpart without molecular imprinting. Structural features and adsorption performance of these microspheres are elucidated by different characterizations and kinetic and thermodynamic analyses. The surface of the molecularly imprinted polymer microspheres (M-PMs) exhibits regular pores of uniform pore size distribution, endowing M-PMs with impressive adsorption selectivity to MG. In contrast, the microspheres without molecular imprinting show a larger average particle diameter and an uneven porous surface (with roughness and a large pore size), causing a lower adsorption selectivity to MG despite a higher adsorption capacity. Various adsorption conditions are investigated, such as pH and initial concentration of the solution with MG, for optimizing the adsorption performance of M-PMs in selectively tackling MG. The adsorption kinetics and thermodynamics are deeply discussed and analyzed, so as to provide a full picture of the adsorption behaviors of the polymer microspheres with and without the molecular imprinting. Significantly, M-PMs show promising solid-phase extraction column applications for recovering MG in a continuous extraction manner.