A Regulable Polyporous Graphite/Melamine Foam for Heat Conduction, Sound Absorption and Electromagnetic Wave Absorption.

To reduce electromagnetic interference and noise pollution within communication base stations and servers, it is necessary for electromagnetic wave absorption (EWA) materials to transition from coating to multifunctional devices. Up to now, the stable and effective integration of multiple functions into one material by a simple method has remained a large challenge. Herein, a foam-type microwave absorption device assembled with multicomponent organic matter and graphite powder is synthesized by a universal combination process. Melamine and phenolic aldehyde amine work as the skeleton and cementing compound, respectively, in which graphite is embedded in the cementing compound interconnected into the mesoscopic 3D electric conductive and heat conductive network. Interestingly, the prepared flexible graphite/melamine foam (CMF) delivers a great EWA performance, with a great effective absorption bandwidth of 9.8 GHz, ultrathin thickness of 2.60 mm, and a strong absorption reflection loss of -41.7 dB. Moreover, the CMF possesses porosity and flexibility, endowing it with sound absorption ability. The CMF is unique in its integration of EWA, heat conduction, sound absorption, and mechanical robustness, as well as its cost-effective and scalable manufacturing. These attributes make CMF promising as a multifunctional device widely used in communication base stations, servers, and chips protection.

Broadband Sound Absorption and High Damage Resistance in a Turtle Shell-Inspired Multifunctional Lattice: Neural Network-Driven Design and Optimization.

Incorporating acoustic and mechanical properties into a single multifunctional structure has attracted considerable attention in engineering. However, effectively integrating these sound absorption properties and damage resistance to achieve multifunctional structural designs remains a great challenge due to imperfect design methods. In this study, the inherent mechanical properties of turtle shells by introducing dissipative pores are leveraged to present a lattice structure that possesses both excellent sound-absorbing and high damage-resistant characteristics. To achieve acoustic optimization design, a universal high-fidelity neural network correction model is proposed to address the impedance calculation challenge in complex structures. Building upon this foundation, a multi-cell combination design enables to achieve high absorption through optimization with a low thickness of 50 mm, resulting in average sound absorption coefficients reaching 0.88 and 0.93 within the frequency ranges of 300-600 Hz and 500-1000 Hz, respectively. It is also found that the optimized structures exhibit exceptional damage resistance under varying relative densities via the coupling effect of the shell thickness on the acoustic and mechanical properties. Overall, this work introduces a novel paradigm for designing intricate multifunctional structures with acoustic and mechanical properties while providing valuable inspiration for future research on multifunctional structure design.

Progress on the Sound Absorption of Viscoelastic Damping Porous Polymer Composites.

Porous polymer composites (PPC) have developed rapidly recently, which are widely used in various industrial fields. Viscoelastic damping is an important behavior of porous polymer composites, and it can determine the sound absorption for noise reduction applications. This review has mainly covered the viscoelastic damping and sound absorption of porous polymer composites. Different fabrication approaches of porous polymer composites are gathered. The mechanism of viscoelastic damping behavior is described, and also the sound absorption properties. Followed by the introduction of enhanced sound absorption of viscoelastic damping porous polymer composites, including the incorporation of fillers, microstructures modification, combination with nanofibrous materials, and multilayer configuration, etc. The incorporated fillers can effectively adjust the interfacial area in composites, and obtain desired bonding conditions. Microstructures modification is an effective tool to improve the morphologies of both polymer matrix and fillers, which can be achieved by chemical treatment and surface coating. The combination with lightweight nanofibrous layer can increase the low frequency absorption. The configuration of multilayer composites can improve both acoustical and mechanical properties for engineering applications. It is hoped that this comprehensive review is benefit for the promising development of porous polymer composites in related fields.

Recent Advances in Preparation and Structure of Polyurethane Porous Materials for Sound Absorbing Application.

Various acoustic materials are developed to resolve noise pollution problem in many industries. Especially, materials with porous structure are broadly used to absorb sound energy in civil construction and transportation area. Polyurethane (PU) porous materials possess excellent damping properties, good toughness, and well-developed pore structures, which have a broad application prospect in sound absorption field. This work aims to summarize the recent progress of fabrication and structure for PU porous materials in sound absorption application. The sound absorption mechanisms of porous materials are introduced. Different kinds of structure for typical PU porous materials in sound absorption application are covered and highlighted, which include PU foam, modified PU porous materials, aerogel, templated PU, and special PU porous materials. Finally, the development direction and existing problems of PU material in sound absorption application are briefly prospected. It can be expected that porous PU with high sound absorption coefficient can be obtained by using some facile methods. The design and accurate regulation of porous structures or construction of multilayer sound absorption structure is favorably recommended to fulfill the high demand of industrial and commercial applications in the future work.

Fire-Resistant and Hierarchically Structured Elastic Ceramic Nanofibrous Aerogels for Efficient Low-Frequency Noise Reduction.

Traffic noise has been regarded as one of the most annoying pollutions that induce severe hazards to human health, both physiological and psychological. The commonly used fibrous noise absorption materials are limited by their large density, poor sound absorption ability at low frequencies, and unsatisfactory fire-resistant ability. Here, we develop hierarchically structured elastic ceramic electrospun nanofibrous aerogels, which possess lightweight properties (density of 13.29 mg cm-3) and superior low-frequency sound absorption ability (NRC value of 0.59). Specifically, the obtained ceramic electrospun nanofibrous aerogel is nonflammable on exposure to fire and can be compressed and quickly recover to its original height without any visible damage. Moreover, the resultant aerogels could be facilely and efficiently manufactured into designed shapes on a large scale, demonstrating their potential for industrialization. The successful design of such ceramic-based bulk materials may provide new insights for the further development of the next-generation high-efficiency sound-absorbing products.

[Analysis of noise reduction measures in a noise workshop handover control room].

Objective: To explore the sound insulation, sound absorption and other noise reduction transformation methods in a noise workshop handover control room. Methods: In December 2021, through the occupational health investigation and on-site testing of the handover control room of a noise workshop, the causes of excessive noise were analyzed, and the transformation design scheme to reduce noise was proposed and the effect was analyzed. Results: Before the transformation, the peak frequency band noise intensity of the noise workshop handover control room was 112.8 dB (A), and the peak frequency was 1000 Hz. After noise reduction, the theoretical calculated control value was 61.0 dB (A), and the measured noise intensity was 59.8 dB (A) . Conclusion: The noise intensity of the handover control room is reduced after noise reduction, which is in line with the contact limit requirements of the control room in GBZ 1-2010 "Hygienic Standards for the Design of Industrial Enterprises", and has reference significance for noise control engineering.

Less Is More: Hollow-Truss Microlattice Metamaterials with Dual Sound Dissipation Mechanisms and Enhanced Broadband Sound Absorption.

Being a lightweight material with high design freedoms, there are increasing research interests in microlattice metamaterials as sound absorbers. However, thus far, microlattices are limited to one sound dissipation mechanism, and this inhibits their broadband absorption capabilities. Herein, as opposed to improving performances via the addition of features, a dissipation mechanism is subtractively introduced by hollowing out the struts of the microlattice. Then, a class of hollow-truss metamaterial (HTM) that is capable of harnessing dual concurrent dissipation mechanisms from its complex truss interconnectivity and its hollow interior is presented. Experimental sound absorption measurements reveal superior and/or customizable absorption properties in the HTMs as compared to their constitutive solid-trusses. An optimal HTM displays a high average broadband coefficient of 0.72 at a low thickness of 24 mm. Numerically derived, a dissipation theorem based on the superimposed acoustic impedance of the critically coupled resistance and reactance of the outer-solid and inner-hollow phases, across different frequency bands, is proposed in the HTM. Complementary mechanical property studies also reveal improved compressive toughness in the HTMs. This work demonstrates the potential of hollow-trusses, where they gain the dissipation mechanism through the subtraction of the material and display excellent acoustic properties.

Finite Element Solution for Dynamic Mechanical Parameter Influence on Underwater Sound Absorption of Polyurethane-Based Composite.

Underwater noise pollution, mainly emitted by shipping and ocean infrastructure development of human activities, has produced severe environmental impacts on marine species and seabed habitats. In recent years, a polyurethane-based (PU-based) composite with excellent damping performance has been increasingly utilized as underwater sound absorption material by attaching it to equipment surfaces. As one of the key parameters of damping materials, dynamic mechanical parameters are of vital importance to evaluating the viscoelastic damping property and thus influencing the sound absorption performance. Nevertheless, lots of researchers have not checked thoroughly the relationship and the mechanism of the material dynamic mechanical parameters and its sound absorption performance. In this work, a finite element model was fabricated and verified effectively using acoustic pulse tube tests to investigate the aforementioned issues. The influence of the dynamic mechanical parameters on underwater sound absorption performance was systematically studied with the frequency domain to reveal the mechanism and the relationship between damping properties and the sound absorption of the PU-based composite. The results indicate that the internal friction of the molecular segments and the structure stiffness were the two main contributors of the PU-based composite's consumption of sound energy, and the sound absorption peak and the sound absorption coefficient could be clearly changed by adjusting the dynamic mechanical parameters of the composite. This study will provide helpful guidance to develop the fabrication and engineering applications of the PU-based composite with outstanding underwater sound absorption performance.

Microlattice Metamaterials with Simultaneous Superior Acoustic and Mechanical Energy Absorption.

The advent of 3D printing brought about the possibilities of microlattice metamaterials as advanced materials with the potentials to surpass the functionalities of traditional materials. Sound absorbing materials which are also tough and lightweight are of particular importance as practical engineering materials. There are however a lack of attempts on the study of metamaterials multifunctional for both purposes. Herein, we present four types of face-centered cubic based plate and truss microlattices as novel metamaterials with simultaneous excellent sound and mechanical energy absorption performance. High sound absorption coefficients nearing 1 and high specific energy absorption of 50.3 J g-1 have been measured. Sound absorption mechanisms of microlattices are proposed to be based on a "cascading resonant cells theory", an extension of the Helmholtz resonance principle that we have conceptualized herein. Characteristics of absorption coefficients are found to be essentially geometry limited by the pore and cavity morphologies. The excellent mechanical properties in turn derive from both the approximate membrane stress state of the plate architecture and the excellent ductility and strength of the base material. Overall, this work presents a new concept on the specific structural design and materials selection for architectured metamaterials with dual sound and mechanical energy absorption capabilities.

Circular reutilization of coffee waste for sound absorbing panels: A perspective on material recycling.

The increase in coffee consumption has led to increased production of coffee waste. Methods to recycle coffee waste are constantly being researched. Coffee powder is a porous material that can effectively be used to absorb sound. In this study, sound-absorbing panels were developed using coffee waste combined with resin. A sound absorption characterization of the new material was performed. Then, the noise reduction potential using coffee-waste sound absorbers was investigated in cafés. A café has several noise sources, such as coffee machines, music, and the voices of people. The noise reduction effect was evaluated using the ODEON simulation software together with the improvement in both the clarity and reverberation time in a case study café. In the investigated room, the acoustic definition (D50) increased up to 0.8, while the reverberation time (RT) reduced to 0.6 s. The results of this study demonstrate that the noise generated in the café was reduced by recycling the coffee waste produced as a by-product in the same building. Finally, this study presents a new construction material manufactured through coffee waste that is in turn applied to cafés where the coffee waste itself is produced.

[Acoustic conditions in open plan office - Application of technical measures in a typical room]. / Warunki akustyczne w pomieszczeniach biurowych open space ­ zastosowanie srodków technicznych w typowym pomieszczeniu.

BACKGROUND: Noise in open plan offices should not exceed acceptable levels for the hearing protection. Its major negative effects on employees are nuisance and impediment in execution of work. Specific technical solutions should be introduced to provide proper acoustic conditions for work performance. MATERIAL AND METHODS: Acoustic evaluation of a typical open plan office was presented in the article published in "Medycyna Pracy" 5/2016. None of the rooms meets all the criteria, therefore, in this article one of the rooms was chosen to apply different technical solutions to check the possibility of reaching proper acoustic conditions. Acoustic effectiveness of those solutions was verified by means of digital simulation. The model was checked by comparing the results of measurements and calculations before using simulation. RESULTS: The analyzis revealed that open plan offices supplemented with signals for masking speech signals can meet all the required criteria. It is relatively easy to reach proper reverberation time (i.e., sound absorption). It is more difficult to reach proper values of evaluation parameters determined from A-weighted sound pressure level (SPLA) of speech. The most difficult is to provide proper values of evaluation parameters determined from speech transmission index (STI). Finally, it is necessary (besides acoustic treatment) to use devices for speech masking. The study proved that it is technically possible to reach proper acoustic condition. CONCLUSIONS: Main causes of employees complaints in open plan office are inadequate acoustic work conditions. Therefore, it is necessary to apply specific technical solutions - not only sound absorbing suspended ceiling and high acoustic barriers, but also devices for speech masking. Med Pr 2018;69(2):153-165.

Prediction of sound absorption by a circular orifice termination in a turbulent pipe flow using the Lattice-Boltzmann method.

The Lattice Boltzmann method was used to perform numerical simulations of the sound and turbulent flow inside a standing wave tube terminated by a circular orifice in presence of a forced mean flow. The computational domain comprised a standard virtual impedance tube apparatus in which sound waves were produced by periodic pressure oscillations imposed at one end. An orifice plate was located between the driver and the tube termination. All waves transmitted through the orifice were effectively dissipated by a passively non-reflecting (i.e. anechoic) boundary at the tube termination. A turbulent jet was formed at the discharge of the orifice by the forced mean flow inside the tube. The acoustic impedance and sound absorption coefficient of the orifice plate were calculated from a wave decomposition of the sound field upstream of the orifice. Simulations were carried out for different excitation frequencies, and orifice Mach numbers. Results and trends were in good quantitative agreement with available analytical solutions and experimental data. The Lattice Boltzmann method was found to be an efficient numerical scheme for prediction of sound absorption by realistic three dimensional orifice configurations.

Structural and acoustical performances of oil palm trunk waste - Elastomeric thermoplastic polyurethane composite.

In this report, naturally available materials have been utilized in the development of acoustic absorbers. This work presents the study of the effect of oil palm trunks dust (OPTD) loading to the mechanical and acoustical properties of elastomeric thermoplastic polyurethane (TPU). Four composite sheets of 3-mm thickness were prepared by varying the OPTD loadings with 10-40% wt into the polyurethane. Density, modulus elasticity, sound absorption coefficient and sound transmission loss of the samples were measured according to corresponding standards. The OPTD is found to reduce the density of the elastomeric polyurethane and at the same time, it increases the Young's modulus up to 215 MPa. The composite material can be applied as sound absorber panel installed in front of a rigid wall with an air gap. Increasing the air gap, thus lowering the air stiffness, shifts the absorption peak to a lower frequency. With OPTD loadings, the formation of micro-pores in the inner structure helps to improve the peak of sound absorption of the panel at the resonant frequency which can reach above 0.9. As the OPTD loading has effect on density, the effect on the sound transmission loss at the mass-controlled region is also apparent.

Analysis of Acoustic Absorption Coefficients and Characterization of Epoxy Adhesive Compositions Based on the Reaction Product of Bisphenol A with Epichlorohydrin Modified with Fillers.

Material development in acoustic engineering plays a significant role in various applications, such as industrial noise control. It is important and relevant to consider alternative materials capable of reducing noise levels in different frequency ranges. One commonly used material in engineering structures is epoxy adhesive compositions. Favoring the use of adhesive compositions are their main characteristics, including weight reduction in structures, corrosion resistance, relatively low manufacturing costs, and high mechanical strength. This paper aims to discuss the relationship between the mechanical properties of modified epoxy adhesives, their structure, and sound absorption efficiency. The subjects of this study were specimens of an epoxy composition in the cured state. Acoustic absorption coefficients were evaluated using a dual-microphone impedance tube, and tensile, compressive, and bending strength properties were determined using a testing machine. The impact strength of the compositions was also investigated. An analysis of the structure of the adhesives in the cured state was carried out using a scanning electron microscope. The test specimens were made from Epidian 5 epoxy resin cured with a polyamide PAC curing agent. Nanobent ZR2 aluminosilicate in an amount of 1%, CaCO3 calcium carbonate in an amount of 5%, and CWZ-22 activated carbon in an amount of 20% were used as modifiers. The conducted studies revealed that the highest tensile strength was obtained for the adhesive composition with the addition of ZR2 filler. The highest compressive strength was exhibited by the adhesive composition with the addition of CWZ-22 filler. The highest flexural strength was demonstrated by the unmodified composition. For all the tested adhesive compositions, low sound absorption values were achieved, with a maximum of approximately 0.18. From the perspective of the reduction index R, it was observed that these samples performed better in reduction than in absorption. The best values were achieved in the compositions modified with CaCO3.

The Influence of Diatomite on the Sound Absorption Ability of Composites.

Diatomites are well-known mineral materials formed thousands of years ago from the skeletons of diatoms. They are found in many places around the world and have a wide range of applications. This article presents innovative research related to the possibility of using diatomite as a filler in composites to improve their sound absorption properties. The results of the study of the effect of diatomite processing (calcination) and its degree of fineness on the sound absorption coefficient of thermoplastic composites are presented. Three fractions of diatomite (0 ÷ 0.063 mm; 0.5 ÷ 3 mm; 2 ÷ 5 mm) and its variable mass proportion (0, 25, and 50 wt.%) were used. The composites were made with flax fibers as a reinforcement, polylactide as a matrix, and diatomite as an additional filler. This paper also presents the results of oxide chemical composition, diatomite mineral phase composition, morphology, and thermal conductivity coefficient of all diatomite fractions studied. In addition, the average particle size for diatomite powder was also determined. The most important of the studies was the determination of the acoustic properties of the aforementioned composites. As a result of the tests, it was found that the smallest fraction of diatomite particles and a variant without thermal treatment give the best effect in terms of sound absorption.

Improving the acoustic performance of flexible polyurethane foam using biochar modified by (3-aminopropyl)trimethoxysilane coupling agent.

This study aims to investigate the potential of integrating natural biochar (BC) derived from eggshell waste into flexible polyurethane (FPU) foam to enhance its mechanical and acoustic performance. The study explores the impact of incorporating BC at various weight ratios (0.1, 0.3, 0.5, and 0.7 wt. %) on the properties of the FPU foam. Additionally, the effects of modifying the BC with (3-aminopropyl)trimethoxysilane (APTMS) at different ratios (10, 20, and 30 wt. %) and the influence of diverse particle sizes of BC on the thermal, mechanical, and acoustic characteristics of the FPU composite are investigated. The functional groups, morphology, and elemental composition of the developed FPU composites are analyzed using Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray (EDX) techniques. Characteristics such as density, gel fraction, and porosity were also assessed. The results reveal that the density of FPU foam increased by 4.32% and 7.83% while the porosity decreased to 50.22% and 47.05% with the addition of 0.1 wt. % of unmodified BC and modified BC with 20 wt. % APTMS, respectively, compared to unfilled FPU. Additionally, the gel fraction of the FPU matrix increases by 1.91% and 3.55% with the inclusion of 0.1 wt. % unmodified BC and modified BC with 20 wt. % APTMS, respectively. Furthermore, TGA analysis revealed that all FPU composites demonstrate improved thermal stability compared to unfilled FPU, reaching a peak value of 312.17°C for the FPU sample incorporating BC modified with 20 wt. % APTMS. Compression strength increased with 0.1 wt. % untreated BC but decreased at higher concentrations. Modifying BC with 20% APTMS resulted in an 8.23% increase in compressive strength compared to unfilled FPU. Acoustic analysis showed that the addition of BC improved absorption, and modified BC enhanced absorption characteristics of FPU, reaching Class D with a 20 mm thickness. BC modified with APTMS further improved acoustic properties compared to the unfilled FPU sample (Class E), with 20% modification showing the best results. These composites present promising materials for sound absorption applications and address environmental issues related to eggshell waste.

Down-film as a new non-frame porous material for sound absorption.

Down-polyethylene film material has been introduced for the first time as an excellent non-frame sound absorber, showing a distinctively outstanding performance. It contains down fiber adjacent to each other without firm connection in between, forming a structure of elastic fiber network. The unique structure has broadband response to sound wave, showing non-synchronous vibration in low and middle frequency and synchronous vibration in middle and high frequency. The broadband resonance in middle and high frequency allows the structure to achieve complete sound absorption in resonance frequency band. Moreover, down-polyethylene film material possesses forced vibration, corresponding sound absorption coefficient has been obtained based on vibration theory. The down-film sound absorption material has the characteristics of light weight, soft, environment-friendly, and has excellent broadband sound absorption performance.

Exploring the acoustic potential of 3D printed micro-perforated panels: A comparative analysis.

In the present study, the sound absorption performance of inhomogeneous Micro-Perforated Panels (MPPs) with multiple cavities is investigated. Two models, a three-cavity system and a four-cavity system, are proposed and a numerical study is performed using MATLAB. The models are validated through experimental analysis in an impedance tube. The study meticulously varies the geometrical parameters, including pore diameter, thickness of the MPP, perforation ratio, and back-cavity length. It is found that MPPs with a greater number of sub-cavities have a better sound absorption coefficient than two-cavity systems. The results suggest that the back air cavity is predominantly responsible for multiple peaks, ensuring wideband sound absorption. It is also found that smaller perforation ratios for sub-cavities with larger pore diameters improve sound absorption performance in the lower frequency region. The study indicates that a pore diameter of less than 0.5 mm should be used for better sound absorption above the range of 800-850 Hz, and back cavity length has greater control than pore diameter between 850 Hz and 2000 Hz to make the curve smooth with less fluctuation. The findings have significant implications for the design of MPPs for real-world applications.

3D-Printed Lattice Structures for Sound Absorption: Current Progress, Mechanisms and Models, Structural-Property Relationships, and Future Outlook.

The reduction of noises, achieved through absorption, is of paramount importance to the well-being of both humans and machines. Lattice structures, defined as architectured porous solids arranged in repeating patterns, are emerging as advanced sound-absorbing materials. Their immense design freedom allows for customizable pore morphology and interconnectivity, enabling the design of specific absorption properties. Thus far, the sound absorption performance of various types of lattice structures are studied and they demonstrated favorable properties compared to conventional materials. Herein, this review gives a thorough overview on the current research status, and characterizations for lattice structures in terms of acoustics is proposed. Till date, there are four main sound absorption mechanisms associated with lattice structures. Despite their complexity, lattice structures can be accurately modelled using acoustical impedance models that focus on critical acoustical geometries. Four defining features: morphology, relative density, cell size, and number of cells, have significant influences on the acoustical geometries and hence sound wave dissipation within the lattice. Drawing upon their structural-property relationships, a classification of lattice structures into three distinct types in terms of acoustics is proposed. It is proposed that future attentions can be placed on new design concepts, advanced materials selections, and multifunctionalities.

Strong, highly porous and sustainable nanocellulose foam made using bioderived hyperbranched crosslinker for thermal insulation and sound absorption.

This paper reports an environment-friendly biobased foam made with cellulose nanofiber (CNF) and a biobased hyperbranched crosslinker, glycerol succinic anhydride (GSA). As a biobased hyperbranched crosslinker, carboxyl-terminated GSA is synthesized through a straightforward esterification process involving glycerol and succinic anhydride. The GSA-crosslinked CNF (GSA/CNF) foam is prepared using a facile, sustainable, cost-effective, and efficient solvent-exchange method. The resulting foam exhibits notable characteristics, including improved dimensional stability, remarkably low density (13.41 mg/cm3) with high porosity (>99 %), and exceptional compressive strength (494 kPa) and modulus (452 kPa). Further, the foam offers outstanding sound absorption capabilities with a coefficient of 0.986 at 2 kHz and remarkably low thermal conductivity (30.18 mW/mK), significantly lower than commonly used and reported porous materials, indicating its potential as an efficient, environmentally friendly sound absorption and thermal insulation material.