Divergent Synthesis of Pyrazoles via Manganese Pincer Complex Catalyzed Acceptorless Dehydrogenative Coupling Reactions.

This report detailed the synthesis of multi-substituted pyrazoles through the acceptorless dehydrogenative coupling (ADC) reaction catalyzed by a well-defined manganese(I)-pincer complex. Symmetrically substituted pyrazoles were synthesized by reacting 1,3-diols with hydrazines. Unsymmetrically substituted pyrazoles were selectively made via the ADC of primary alcohols with methyl hydrazones. Water and hydrogen are liberated as the green byproducts. The endurance of these methodologies has been presented by producing 30 substrates with varied functionalities. Model reactions were scaled up to demonstrate practicability. The reaction rate and order were measured to transparent the involvement of the reagents during catalysis. Control experiments elucidated the plausible reaction mechanisms.

Sustainable synthesis of bionanomaterials using non-native plant extracts for maintaining ecological balance: A computational bibliography analysis.

Biological approaches via biomolecular extracts of bacteria, fungi, or plants have recently been introduced as an alternative approach to synthesizing less or nontoxic nanomaterials, compared to conventional physical and chemical approaches. Among these biological methods, plant-mediated approaches (phytosynthesis) are reported to be highly beneficial for large-scale, nontoxic nanomaterial synthesis. However, plant-mediated synthesis of nanomaterials using native plant extract can lead to bioprospecting issues and deforestation challenges. On the other hand, non-native or invasive plants are non-indigenous to a particular geographic location that can grow and spread rapidly, ultimately disrupting the local and endogenous plant communities or ecosystems. Thus, controlling or eradicating these non-native plants before they damage the ecosystem is necessary. Even though mechanical, chemical, and biological approaches are available to control non-native plants, all these methods possess certain limitations, such as environmental toxicity, disturbance in the nutrient cycle, and loss of genetic integrity. Therefore, non-native plants were recently proposed as a novel sustainable source of phytochemicals for preparing nanomaterials via green chemistry, mainly metallic nanoparticles, as an alternative to native, agriculture-based, or medicinal plants. This work aims to cover a literature gap on plant-mediated bionanomaterial synthesis with an overview and bibliography analysis of non-native plants via novel data mining and advanced visualization tools. In addition, the potential of non-native plants as a sustainable, green chemistry-based alternative for bionanomaterial preparation for maintaining ecological balance, the mechanism of formation via phytochemicals, and their possible applications to promote their control and spread were also discussed. The bibliography analysis revealed that only an average of 4 articles have been published in the last 10 years (2013-2023) on non-native/invasive plants for nanomaterial synthesis, which shows the significance of this article.

The Synthesis of 2'-Hydroxychalcones under Ball Mill Conditions and Their Biological Activities.

Chalcones are polyphenols that belong to the flavonoids family, known for their broad pharmacological properties. They have thus attracted the attention of chemists for their obtention and potential activities. In our study, a library of compounds from 2'-hydroxychalcone's family was first synthesized. A one-step mechanochemical synthesis via Claisen-Schmidt condensation reaction under ball mill conditions was studied, first in a model reaction between a 5'-fluoro-2'-hydroxyacetophenone and 3,4-dimethoxybenzaldehyde. The reaction was optimized in terms of catalysts, ratio of reagents, reaction time, and influence of additives. Among all assays, we retained the best one, which gave the highest yield of 96% when operating in the presence of 1 + 1 eq. of substituted benzaldehyde and 2 eq. of KOH under two grinding cycles of 30 min. Thus, this protocol was adopted for the synthesis of the selected library of 2'-hydroxychalcones derivatives. The biological activities of 17 compounds were then assessed against Plasmodium falciparum, Leishmania donovani parasite development, as well as IGR-39 melanoma cell lines by inhibiting their viability and proliferation. Compounds 6 and 11 are the most potent against L. donovani, exhibiting IC50 values of 2.33 µM and 2.82 µM, respectively, better than the reference drug Miltefosine (3.66 µM). Compound 15 presented the most interesting antimalarial activity against the 3D7 strain, with IC50 = 3.21 µM. Finally, chalcone 12 gave the best result against IGR-39 melanoma cell lines, with an IC50 value of 12 µM better than the reference drug Dacarbazine (IC50 = 25 µM).

Metal-Free Electrochemical Reduction of Disulfides in an Undivided Cell under Mass Transfer Control.

Electroorganic synthesis is generally considered to be a green alternative to conventional redox reactions. Electrochemical reductions, however, are less advantageous in terms of sustainability, as sacrificial metal anodes are often employed. Divided cell operation avoids contact of the reduction products with the anode and allows for convenient solvent oxidation, enabling metal free greener electrochemical reductions. However, the ion exchange membranes required for divided cell operation on a commercial scale are not amenable to organic solvents, which hinders their applicability. Herein, we demonstrate that electrochemical reduction of oxidatively sensitive compounds can be carried out in an undivided cell without sacrificial metal anodes by controlling the mass transport to a small surface area electrode. The concept is showcased by an electrochemical method for the reductive cleavage of aryl disulfides. Fine tuning of the electrode surface area and current density has enabled the preparation of a wide variety of thiols without formation of any oxidation side products. This strategy is anticipated to encourage further research on greener, metal free electrochemical reductions.

Visible Light Induced Three-Component 1,2-Dicarbofunctionalization of Alkenes and Alkynes.

Harnessing visible-light in organic synthesis is one of the most effective methods that aligns with green and sustainable chemistry principles and hence skyrocketed in the last two decades. Similarly, three-component 1,2-dicarbofunctionalization of alkenes and alkynes has recently been a great choice to construct complex molecular systems in an easy and rapid manner. Therefore, light-induced reactions can be an excellent alternative to carry out 1,2-dicarbofunctionalization reactions, and very recently, organic chemists across the globe have fascinated us with their interesting articles. In this present review, we have summarized the recent advancements in the area of visible light induced three-component 1,2-dicarbofunctionalization of alkenes and alkynes till March 2023. We have categorized the discussion based on the catalysts used to carry out the transformations for better understanding and different important aspects of these transformations have also been covered.

Mechanochemical Studies on Coupling of Hydrazines and Hydrazine Amides with Phenolic and Furanyl Aldehydes-Hydrazones with Antileishmanial and Antibacterial Activities.

Hydrazone compounds represent an important area of research that includes, among others, synthetic approaches and biological studies. A series of 17 hydrazones have been synthesized by mechanochemical means. The fragments chosen were phenolic and furanyl aldehydes coupled with 12 heterocyclic hydrazines or hydrazinamides. All compounds can be obtained quantitatively when operating on a planetary ball mill and a maximum reaction time of 180 min (6 cycles of 30 min each). Complete spectroscopic analyses of hydrazones revealed eight compounds (3-5, 8-11, 16) present in one geometric form, six compounds (1, 2, 13-15) present in two isomeric forms, and three compounds (6, 7, 12) where one rotation is restricted giving rise to two different forms. The single crystal X-ray structure of one of the hydrazones bearing the isoniazid fragment (8) indicates a crystal lattice consisting of two symmetry-independent molecules with different geometries. All compounds obtained were tested for anti-infectious and antibacterial activities. Four compounds (1, 3, 5 and 8) showed good activity against Mycobacterium tuberculosis, and one (7) was very potent against Staphylococcus aureus. Most interesting, this series of compounds displayed very promising antileishmanial activity. Among all, compound 9 exhibited an IC50 value of 0.3 µM on the Leishmania donovani intramacrophage amastigote in vitro model and a good selectivity index, better than miltefosine, making it worth evaluating in vivo.

Green Synthesis of Aromatic Nitrogen-Containing Heterocycles by Catalytic and Non-Traditional Activation Methods.

Recent advances in the environmentally benign synthesis of aromatic N-heterocycles are reviewed, focusing primarily on the application of catalytic methods and non-traditional activation. This account features two main parts: the preparation of single ring N-heterocycles, and their condensed analogs. Both groups include compounds with one, two and more N-atoms. Due to the large number of protocols, this account focuses on providing representative examples to feature the available methods.

Green methodologies for the synthesis of 2-aminothiophene.

Pollution and the rising energy demand have prompted the design of new synthetic reactions that meet the principles of green chemistry. In particular, alternative synthesis of 2-aminothiophene have recently focused interest because 2-aminothiophene is a unique 5-membered S-heterocycle and a pharmacophore providing antiprotozoal, antiproliferative, antiviral, antibacterial or antifungal properties. Here, we review new synthetic routes to 2-aminothiophenes, including multicomponent reactions, homogeneously- or heterogeneously-catalyzed reactions, with focus on green pathways.

Heterogeneous Copper-Catalyzed Cross-Coupling for Sustainable Synthesis of Chiral Allenes: Application to the Synthesis of Allenic Natural Products.

Classical Crabbé type SN 2' substitutions of propargylic substrates has served as one of the standard methods for the synthesis of allenes. However, the stereospecific version of this transformation often requires either stoichiometric amounts of organocopper reagents or special functional groups on the substrates, and the chirality transfer efficiency is also capricious. Herein, we report a sustainable methodology for the synthesis of diverse 1,3-di and tri-substituted allenes by using a simple and cheap cellulose supported heterogeneous nanocopper catalyst (MCC-Amp-Cu(I/II)). This approach represents the first example of heterogeneous catalysis for the synthesis of chiral allenes. High yields and excellent enantiospecificity (up to 97 % yield, 99 % ee) were achieved for a wide range of di- and tri-substituted allenes bearing various functional groups. It is worth noting that the applied heterogeneous catalyst could be recycled at least 5 times without any reduced reactivity. To demonstrate the synthetic utility of the developed protocol, we have applied it to the total synthesis of several chiral allenic natural products.

Sustainable Synthesis of α-Hydroxycarboxylic Acids by Manganese Catalyzed Acceptorless Dehydrogenative Coupling of Ethylene Glycol and Primary Alcohols.

Herein, we report a straightforward synthesis of valuable α-hydroxycarboxylic acid molecules via an acceptorless dehydrogenative coupling of ethylene glycol and primary alcohols. A bench-stable manganese complex catalyzed the reaction, which is scalable, with the product being isolated with high yields and selectivities under mild conditions. The protocol is environmentally benign, producing water and hydrogen gas as the only byproducts. Methanol can also be used as a C1 source for producing the platform molecule lactic acid, with a high turnover of >104 . The methodology was also used to functionalize alcohols derived from natural products and fatty acids. Furthermore, it was applied for synthesizing α-amino acid, α-thiocarboxylic acid, and several drugs and bioactive molecules, including endogenous metabolites, Danshensu, Enalapril, Lisinopril, and Rosmarinic acid. Preliminary mechanistic studies were performed to shed light on the mechanism involved in the reaction.

A General Organophotoredox Strategy to Difluoroalkyl Bicycloalkane (CF2-BCA) Hybrid Bioisosteres.

Here, we report a general approach to the synthesis of the difluoroalkyl bicycloalkanes (CF2 -BCAs), as structural surrogates of aryl ketones and ethers. The chemistry is driven by a dihydrobenzoacridine photocatalyst, that engages in a catalytic electron-donor acceptor (EDA) complex, or directly reduces the fluorinated substrate. These two convergent manifolds lead to the generation of the R-CF2 radical, that reacts with the [1.1.1]- or [3.1.1.]-propellane. The method is extremely general, and extendable to complex bioactive molecules (30 examples, up to 87 % yield). The structural features of the CF2 -BCP hybrid bioisostere were investigated by single crystal X-ray. Finally, we synthesised a CF2 -BCP analogue of a Leukotriene A4 hydrolase inhibitor, replacing the original aryl ether motif. In silico docking studies indicated that this new analogue maintains the same arrangement within the enzyme pocket, profiling the use of the CF2 -BCA hybrid bioisostere in medicinal chemistry settings.

Recent developments in green approaches for sustainable synthesis of indole-derived scaffolds.

An important issue to discover biological structures is the design of sustainable, safe, clean, cost-effective, excellent efficient synthetic reactions, and minimal energy consumption to provide structural diversity compounds with interesting biological properties. Among five-membered nitrogen-containing heterocyclic compounds, indole-containing scaffolds are heterocyclic structures found in abundance in natural products and various synthetic compounds, which have received remarkable attention in recent years due to their therapeutic and pharmaceutical properties and valuable role in the process of drug discovery. Indoles can be synthesized by various procedures although most of these procedures have their own restrictions and drawbacks such as performing the reaction in a toxic solvent, need of transition-metal catalysts, and amount of waste solvents. Due to the medicinal importance of indole and the need for green methods of drug synthesis, this review highlights the latest green synthetic methods leading to the formation of indole-containing compounds focusing on the past 4 years with typical examples. This review is divided into two sections: green solvents and green techniques that lead to the synthesis of indole-derived scaffolds.

Selective One-Pot Multicomponent Synthesis of N-Substituted 2,3,5-Functionalized 3-Cyanopyrroles via the Reaction between α-Hydroxyketones, Oxoacetonitriles, and Primary Amines.

A one-step, three-component reaction between α-hydroxyketones, oxoacetonitriles, and primary amines gives N-substituted 2,3,5-functionalized 3-cyanopyrroles with complete selectivity in up to 90% isolated yields. The reaction worked on a wide substrate scope under mild reaction conditions (AcOH as a catalyst, EtOH, 70 °C, 3 h). The reaction proceeded with very high atom efficiency as water is the only molecule lost during the reaction. The practicality of the reaction was demonstrated on a large gram scale. The structures of the 3-cyanopyrroles were confirmed by single-crystal X-ray diffraction and NMR; this work provides a general and practical entry to pyrrole scaffolds suitably decorated for the synthesis of various bioactive pyrroles in a concise manner.

Inhibitory Effect of Curcumin-Inspired Derivatives on Tyrosinase Activity and Melanogenesis.

Tyrosinase is a well-known copper-containing metalloenzyme typically involved in the synthesis of melanin. Recently, curcumin and several synthetic derivatives have been recognized as tyrosinase inhibitors with interesting anti-melanogenic therapeutic activity. In this study, three curcumin-inspired compounds 1, 6 and 7 were prepared in yields ranging from 60 to 88 % and spectrophotometric, electrochemical, in vitro and in silico analyses were carried out. The viability of PC12 cells, a rat pheochromocytoma derived-cell line, with compounds 1, 6 and 7, showed values around 80% at 5 µM concentration. In cell proliferation assays, compounds 1, 6 and 7 did not show significant toxicity on fibroblasts nor melanoma cells up to 10 µM with viability values over 90%. The inhibition of tyrosinase activity was evaluated both by a UV-Vis spectroscopic method at two different concentrations, 0.2 and 2.0 µM, and by amperometric assay with IC50 for compounds 1, 6 and 7 ranging from 11 to 24 nM. Melanin content assays on human melanoma cells were performed to test the capability of compounds to inhibit melanin biosynthesis. All compounds exerted a decrease in melanin content, with compound 7 being the most effective by showing a melanogenesis inhibition up to four times greater than arbutin at 100 µM. Moreover, the antioxidant activity of the selected inhibitors was evaluated against H2O2 in amperometric experiments, whereby compound 7 was about three times more effective compared to compounds 1 and 6. The tyrosinase X-ray structure of Bacterium megaterium crystal was used to carry out molecular docking studies in the presence of compounds 1, 6 and 7 in comparison with that of kojic acid and arbutin, two conventional tyrosinase inhibitors. Molecular docking of compounds 6 and 7 confirmed the high affinity of these compounds to tyrosinase protein.

Brønsted Acid-Catalysed Dehydrative Substitution Reactions of Alcohols.

The direct, catalytic dehydrative substitution of alcohols is a challenging, yet highly desirable process in the development of more sustainable approaches to organic chemistry. This review outlines recent advances in Brønsted acid-catalysed dehydrative substitution reactions for C-C, C-O, C-N and C-S bond formation. The wide range of processes that are now accessible using simple alcohols as the formal electrophile are highlighted, while current limitations and therefore possible future directions for research are also discussed.

A paper-based polystyrene/nylon Janus platform for the microextraction of UV filters in water samples as proof-of-concept.

A new mix-mode cellulose-based sorptive phase is described that combines two different polymeric domains (i.e., nylon and polystyrene), thus providing simultaneous hydrophilic and hydrophobic features as a result. By analogy with Janus materials, the new paper-based sorptive phase has been named paper-based polystyrene/nylon Janus-platform (P-Ps/Ny-JP). The main advantages of the proposed P-Ps/Ny-JP are the sustainability, simplicity in synthesis, and low cost of this extraction device. The main parameters affecting the synthesis (i.e., coating procedure and polymers proportion) have been studied, and the resulting material has been characterized via scanning electron microscopy and infrared spectroscopy. As a proof-of-concept, the simultaneous extraction of fourteen UV filters of a wide range of polarity, with log P values ranging from - 0.234 to 16.129, from water samples and their determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been performed. The proposed methodology enables the determination of these chemicals with limits of detection from 12 to 71 ng L-1, and the precision, expressed as a relative standard deviation, was below 15%. The extraction device was applied to the analysis of real water samples likely to contain UV filters (i.e., two private swimming pool water and one seawater) and the recovery values were in the range 73-121%.

Novel Methodologies for Chemical Activation in Organic Synthesis under Solvent-Free Reaction Conditions.

One central challenge for XXI century chemists is the development of sustainable processes that do not represent a risk either to humanity or to the environment. In this regard, the search for more efficient and clean alternatives to achieve the chemical activation of molecules involved in chemical transformations has played a prominent role in recent years. The use of microwave or UV-Vis light irradiation, and mechanochemical activation is already widespread in many laboratories. Nevertheless, an additional condition to achieve "green" processes comes from the point of view of so-called atom economy. The removal of solvents from chemical reactions generally leads to cleaner, more efficient and more economical processes. This review presents several illustrative applications of the use of sustainable protocols in the synthesis of organic compounds under solvent-free reaction conditions.

Green synthesis, biomedical and biotechnological applications of carbon and graphene quantum dots. A review.

Carbon and graphene quantum dots are prepared using top-down and bottom-up methods. Sustainable synthesis of quantum dots has several advantages such as the use of low-cost and non-toxic raw materials, simple operations, expeditious reactions, renewable resources and straightforward post-processing steps. These nanomaterials are promising for clinical and biomedical sciences, especially in bioimaging, diagnosis, bioanalytical assays and biosensors. Here we review green methods for the fabrication of quantum dots, and biomedical and biotechnological applications.

When metal-catalyzed C-H functionalization meets visible-light photocatalysis.

While aiming at sustainable organic synthesis, over the last decade particular attention has been focused on two modern fields, C-H bond activation, and visible-light-induced photocatalysis. Couplings through C-H bond activation involve the use of non-prefunctionalized substrates that are directly converted into more complex molecules, without the need of a previous functionalization, thus considerably reduce waste generation and a number of synthetic steps. In parallel, transformations involving photoredox catalysis promote radical reactions in the absence of radical initiators. They are conducted under particularly mild conditions while using the visible light as a cheap and economic energy source. In this way, these strategies follow the requirements of environment-friendly chemistry. Regarding intrinsic advantages as well as the complementary mode of action of the two catalytic transformations previously introduced, their merging in a synergistic dual catalytic system is extremely appealing. In that perspective, the scope of this review aims to present innovative reactions combining C-H activation and visible-light induced photocatalysis.

Sustainable Synthesis of Pure Silica Zeolites from a Combined Strategy of Zeolite Seeding and Alcohol Filling.

Currently, the synthesis of pure silica zeolites always requires the presence of organic structure-directing agents (OSDAs), which direct the assembly pathway and ultimately fill the pore space. A sustainable route is now reported for synthesizing pure silica zeolites in the absence of OSDAs from a combined strategy of zeolite seeding and alcohol filling, where the zeolite seeds direct crystallization of zeolite crystals from amorphous silica, while the alcohol is served as pore filling in the zeolites. Very importantly, the alcohol could be fully washed out from zeolite pores by water at room temperature, which completely avoids calcination at high temperature for removal of OSDAs in the synthesis of pure silica zeolites.