Anisotropic Fracture of Two-Dimensional Ta2NiSe5.

Anisotropic two-dimensional materials present a diverse range of physical characteristics, making them well-suited for applications in photonics and optoelectronics. While mechanical properties play a crucial role in determining the reliability and efficacy of 2D material-based devices, the fracture behavior of anisotropic 2D crystals remains relatively unexplored. Toward this end, we herein present the first measurement of the anisotropic fracture toughness of 2D Ta2NiSe5 by microelectromechanical system-based tensile tests. Our findings reveal a significant in-plane anisotropic ratio (∼3.0), accounting for crystal orientation-dependent crack paths. As the thickness increases, we observe an intriguing intraplanar-to-interplanar transition of fracture along the a-axis, manifesting as stepwise crack features attributed to interlayer slippage. In contrast, ruptures along the c-axis surprisingly exhibit persistent straightness and smoothness regardless of thickness, owing to the robust interlayer shear resistance. Our work affords a promising avenue for the construction of future electronics based on nanoribbons with atomically sharp edges.

Extraordinary Structural Reconstruction of Nanolaminated Ta2FeC MAX Phase for Enhanced Oxygen Evolution Performance.

Renewable energy technologies, such as water splitting, heavily depend on the oxygen evolution reaction (OER). Nanolaminated ternary compounds, referred to as MAX phases, show great promise for creating efficient electrocatalysts for OER. However, their limited intrinsic oxidative resistance hinders the utilization of conductivity in Mn+1Xn layers, leading to reduced activity. In this study, a method is proposed to improve the poor inoxidizability of MAX phases by carefully adjusting the elemental composition between Mn+1Xn layers and single-atom-thick A layers. The resulting Ta2FeC catalyst demonstrates superior performance compared to conventional Fe/C-based catalysts with a remarkable record-low overpotential of 247 mV (@10 mA cm-2) and sustained activity for over 240 h. Notably, during OER processing, the single-atom-thick Fe layer undergoes self-reconstruction and enrichment from the interior of the Ta2FeC MAX phase toward its surface, forming a Ta2FeC@Ta2C@FeOOH heterostructure. Through density functional theory (DFT) calculations, this study has found that the incorporation of Ta2FeC@Ta2C not only enhances the conductivity of FeOOH but also reduces the covalency of Fe─O bonds, thus alleviating the oxidation of Fe3+ and O2-. This implies that the Ta2FeC@Ta2C@FeOOH heterostructure experiences less lattice oxygen loss during the OER process compared to pure FeOOH, leading to significantly improved stability. These results highlight promising avenues for further exploration of MAX phases by strategically engineering M- and A-site engineering through multi-metal substitution, to develop M2AX@M2X@AOOH-based catalysts for oxygen evolution.

2D Tantalum Disulfide Reduction Strategy Customized Ta2O5/rGO Heterointerface Aerogel Toward Boosting Electromagnetic Wave Absorption and Flame Retardancy.

The exceptional and substantial electron affinity, as well as the excellent chemical and thermal stability of transition metal oxides (TMOs), infuse infinite vitality into multifunctional applications, especially in the field of electromagnetic wave (EMW) absorption. Nonetheless, the suboptimal structural mechanical properties and absence of structural regulation continue to hinder the advancement of TMOs-based aerogels. Herein, a novel 2D tantalum disulfide (2H-TaS2) reduction strategy is demonstrated to synthesize Ta2O5/reduced graphene oxide (rGO) heterointerface aerogels with unique characters. As the prerequisite, the defects, interfaces, and configurations of aerogels are regulated by varying the concentration of 2H-TaS2 to ensure the Ta2O5/rGO heterointerface aerogels with appealing EMW absorption properties such as a minimum reflection loss (RLmin) of -61.93 dB and an effective absorption bandwidth (EAB) of 8.54 GHz (7.80-16.34 GHz). This strategy provides valuable insights for designing advanced EMW absorbers. Meanwhile, the aerogel exhibits favorable thermal insulation performance with a value of 36 mW m-1 K-1, outstanding fire resistance capability, and exceptional mechanical energy dissipation performance, making it promising for applications in the aerospace industry and consumer electronics devices.

General synthesis of single-crystalline Ta2O5 nanorods towards enhanced photocatalytic H2 production activity.

As a potential candidate for photocatalytic H2 production from water splitting, Ta2O5 catalyst presents suitable conduction and valence band positions, but suffers from poor charge transfer ability, which seriously limits its photocatalytic performance enhancement. Here, a facile and eco-friendly hydrothermal method was developed for the fabrication of one-dimensional (1D) Ta2O5 nanorods using the freshly precipitated tantalic acids as the precursors. An oriented attachment mechanism was proposed for the growth of Ta2O5 nanorods. Moreover, the present synthetic approach was further extended to direct synthesis of nine kinds of alkaline tantalates and alkaline-earth tantalates nanostructures, suggesting its general applicability. A significant increase in activity in photocatalytic H2 production was revealed on 1D Ta2O5 nanorods. The improved photocatalytic H2 production activity of Ta2O5 nanorods was mainly attributed to its 1D nanorods structure with high crystallization and large specific surface areas as well as excellent charge transfer efficiency.

Photoelectrochemical determination of phloroglucinol based on a combination of a ceramic perovskite and bismuth vanadate.

Phloroglucinol (PL) or 1,3,5-trihydroxybenzene is a phenolic compound used therapeutically for its antispasmodic properties. However, an overdose or prolonged exposure to PL can have harmful effects on human health. This work describes for the first time the development of a photoelectrochemical (PEC) sensor to determine PL. The proposed sensor is based on a fluorine-doped tin oxide (FTO) substrate modified with bismuth calcium tantalate (CaBi2Ta2O9), a ceramic perovskite powder, and bismuth vanadate (BiVO4). Both materials were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The morphology of the BiVO4/CaBi2Ta2O9/FTO platform was evaluated using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The photoelectrochemical response of the platform was evaluated by exploiting with light from a 36 W LED lamp confined in a low-cost homemade box. The BiVO4/CaBi2Ta2O9/FTO sensor showed superior photocurrent response compared to the FTO modified by the individual components (BiVO4/FTO and CaBi2Ta2O9/FTO). Under optimized experimental conditions, the photoelectrochemical sensor showed two linear ranges for PL concentrations ranging from 1 up to 900 µmol L-1 and from 900 up to 2000 µmol L-1, respectively.  The BiVO4/CaBi2Ta2O9/FTO sensor exhibited excellent results regarding precision, accuracy, and selectivity for PL detection. PL determination was successfully performed in water and artificial urine samples, with recovery values between 100.1 and 102.2%.

Dielectric-Engineered High-Speed, Low-Power, Highly Reliable Charge Trap Flash-Based Synaptic Device for Neuromorphic Computing beyond Inference.

The coming of the big-data era brought a need for power-efficient computing that cannot be realized in the Von Neumann architecture. Neuromorphic computing which is motivated by the human brain can greatly reduce power consumption through matrix multiplication, and a device that mimics a human synapse plays an important role. However, many synaptic devices suffer from limited linearity and symmetry without using incremental step pulse programming (ISPP). In this work, we demonstrated a charge-trap flash (CTF)-based synaptic transistor using trap-level engineered Al2O3/Ta2O5/Al2O3 gate stack for successful neuromorphic computing. This novel gate stack provided precise control of the conductance with more than 6 bits. We chose the appropriate bias for highly linear and symmetric modulation of conductance and realized it with very short (25 ns) identical pulses at low voltage, resulting in low power consumption and high reliability. Finally, we achieved high learning accuracy in the training of 60000 MNIST images.

Ultra-sensitive specific detection of nucleic acids in pathogenic infections by Ta2C-MXene sensitization-based ultrafine plasmon spectroscopy combs.

Accurate and rapid population-scale screening techniques based on SARS-CoV-2 RNA are essential in preventing and controlling the COVID-19 epidemic. However, the sensitivity and specificity of the assay signal are challenged by the problems of target dilution and sample contamination inherent in high-volume pooled testing. Here, we reported a collaborative system of high-loaded hybrid probes targeting N and OFR1a coupling with the novel Ta2C-M/Au/TFBG biosensor, providing high-intensity vector signals for detecting SARS-CoV-2. The method relies on a segmental modification approach to saturable modify multiple activation sites of SARS-CoV-2 on the high-performance Ta2C-M surface. The coupling of multi-site synergy with composite excited TFBG results in excellent signal transduction, detection limits (0.2 pg/mL), and hybridization efficiency. Without relying on amplification, the collaborative system achieved specific differentiation of 30 clinical samples in an average diagnostic time of 1.8 min. In addition, for the first time, a kinetic determination of dilution mixed samples was achieved and showed a high-intensity carrier signal and fantastic stability. Therefore, it can be used as a collaborative, integrated tool to play a massive role in the screening, prevention, and control of COVID-19 and other epidemics.

Fabrication and Performance of a Ta2O5 Thin Film pH Sensor Manufactured Using MEMS Processes.

In this work, a capacitive pH sensor consisting of Ta2O5 functional film is designed and fabricated by employing MEMS-based procedures. The Ta2O5 thin film has an amorphous microstructure, and its surface roughness is less than 3.17 nm. A signal processing circuit and a software filtering algorithm are also designed to measure the pH value, thus improving the detection accuracy and anti-interference ability. Good linearity (R2 = 0.99904) and sensitivity (63.12 mV/pH) are recorded for the proposed sensing element in the range of pH 2~12. In addition, the sensor's drift and hysteresis are equal to 5.1 mV and 5.8 mV, respectively. The enhanced sensing performance in combination with the facile miniaturization process, low fabrication cost, and suitability for mass production render the fabricated sensor attractive for applications where pH change measurements in a water environment are required.

Visible Near-Infrared Photodetection Based on Ta2NiSe5/WSe2 van der Waals Heterostructures.

The increasing interest in two-dimensional materials with unique crystal structures and novel band characteristics has provided numerous new strategies and paradigms in the field of photodetection. However, as the demand for wide-spectrum detection increases, the size of integrated systems and the limitations of mission modules pose significant challenges to existing devices. In this paper, we present a van der Waals heterostructure photodetector based on Ta2NiSe5/WSe2, leveraging the inherent characteristics of heterostructures. Our results demonstrate that this detector exhibits excellent broad-spectrum detection ability from the visible to the infrared bands at room temperature, achieving an extremely high on/off ratio, without the need for an external bias voltage. Furthermore, compared to a pure material detector, it exhibits a fast response and low dark currents (~3.6 pA), with rise and fall times of 278 µs and 283 µs for the response rate, respectively. Our findings provide a promising method for wide-spectrum detection and enrich the diversity of room-temperature photoelectric detection.

Nanomaterials Based on Collaboration with Multiple Partners: Zn3Nb2O8 Doped with Eu3+ and/or Amino Substituted Porphyrin Incorporated in Silica Matrices for the Discoloration of Methyl Red.

Designing appropriate materials destined for the removal of dyes from waste waters represents a great challenge for achieving a sustainable society. Three partnerships were set up to obtain novel adsorbents with tailored optoelectronic properties using silica matrices, Zn3Nb2O8 oxide doped with Eu3+, and a symmetrical amino-substituted porphyrin. The pseudo-binary oxide with the formula Zn3Nb2O8 was obtained by the solid-state method. The doping of Zn3Nb2O8 with Eu3+ ions was intended in order to amplify the optical properties of the mixed oxide that are highly influenced by the coordination environment of Eu3+ ions, as confirmed by density functional theory (DFT) calculations. The first proposed silica material, based solely on tetraethyl orthosilicate (TEOS) with high specific surface areas of 518-726 m2/g, offered better performance as an adsorbent than the second one, which also contained 3-aminopropyltrimethoxysilane (APTMOS). The contribution of amino-substituted porphyrin incorporated into silica matrices resides both in providing anchoring groups for the methyl red dye and in increasing the optical properties of the whole nanomaterial. Two different types of methyl red adsorption mechanisms can be reported: one based on surface absorbance and one based on the dye entering the pores of the adsorbents due to their open groove shape network.

Dark-Light Tandem Catalytic Oxidation of Formaldehyde over SrBi2Ta2O9 Nanosheets.

Formaldehyde (HCHO), as one of the main indoor toxic pollutions, presents a great threat to human health. Hence, it is imperative to efficiently remove HCHO and create a good indoor living environment for people. Herein, a layered perovskite material SrBi2Ta2O9 (SBT), was studied for the first time and exhibited superior photocatalytic efficiency and stability compared to commercial TiO2 (P25). Furthermore, a unique dark-light tandem catalytic mechanism was constructed. In the dark reaction stage, HCHO (Lewis base) site was adsorbed on the terminal (Bi2O2)2+ layer (Lewis acid) site of SBT in the form of Lewis acid-base complexation and was gradually oxidized to CO32- intermediate (HCHO → DOM (dioxymethylene) → HCOO- → CO32-). Then, in the light reaction stage, CO32- was completely converted into CO2 and H2O (CO32- → CO2). Our study contributes to a thorough comprehension of the photocatalytic oxidation of HCHO and points out its potential for day-night continuous work applications in a natural environment.

Improved analog switching characteristics of Ta2O5-based memristor using indium tin oxide buffer layer for neuromorphic computing.

A memristor is defined as a non-volatile memory switching two-terminal resistor, and a memristor with digital switching characteristics is widely studied as a next-generation non-volatile memory because of its simple structure, high integration density, and low power consumption. Recently, analog memristors with gradual resistance switching (RS) characteristics have garnered great attention because of their potential to implement artificial synapses that can emulate the brain functions. Transition metal oxides are thought to be strong candidate materials for the RS. In particular, tantalum oxide (TaOx)-based memristive devices provide stable and durable switching characteristics. TaOx-based memristors utilize analog switching characteristics and have excellent durability and reliability, so they can be applied as artificial synaptic device. In this study, the characteristics of analog RS using Ta2O5-based memristive devices were investigated. The current level of the Pt/Ta2O5/Pt memristors was improved by adjusting the thickness of Ta2O5. In particular, when an indium-tin-oxide (ITO) buffer layer was added to Ta2O5forming a Pt/ITO/Ta2O5/Pt heterostructured double-layer device, it showed more symmetrical potentiation and depression characteristics under both polarities than a single-layer device without ITO layer. The symmetrical and linear potentiation and depression characteristics are essential for the development of efficient memristor-based neuromorphic systems. Insertion of the ITO buffer layer improves linearity, symmetry, and stability of the analog RS properties of Ta2O5-based memristors to artificial synapses.

Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study.

A Ta2O5-anchored-piperidine-4-carboxylic acid (PPCA) nanoparticle has been synthesized and characterized. It was then used as a highly effective nanocatalyst for the synthesis of quinolin-2(1H)-one derivatives through CO bond functionalization. The special advantage of this heterogeneous solid catalyst is the reusability of the catalyst for up to five cycles without any noticeable reduction in product yields. In comparison, healthy reaction profiles, wide substrate scope, excellent yields and easy workup conditions are the notable highlights of this approach. All the compounds were tested for their anticancer activity against MCF-7 (human breast), HepG2 (human liver), HCT116 (human colorectal), and PC-3 (human prostate) cancer cell lines with the MTT assay. All the compounds were shown to have moderate to good inhibitory effects on tested cancer cell lines. Besides, compounds 5b, 5c and 5d showed good selectivity against epidermal growth factor receptor-tyrosine kinase (EGFR-TK). Molecular docking results showed that active compounds showed a good affinity towards EGFR kinase (PDB ID: 6V6O) by forming two hydrogen bonds with Cys-797 and Tyr-801. All the compounds were screened for computational ADMET and Lipinski analysis.

Lithography Processable Ta2O5 Barrier-Layered Chitosan Electric Double Layer Synaptic Transistors.

We proposed a synaptic transistor gated using a Ta2O5 barrier-layered organic chitosan electric double layer (EDL) applicable to a micro-neural architecture system. In most of the previous studies, a single layer of chitosan electrolyte was unable to perform lithography processes due to poor mechanical/chemical resistance. To overcome this limitation, we laminated a high-k Ta2O5 thin film on chitosan electrolyte to ensure high mechanical/chemical stability to perform a lithographic process for micropattern formation. Artificial synaptic behaviors were realized by protonic mobile ion polarization in chitosan electrolytes. In addition, neuroplasticity modulation in the amorphous In-Ga-Zn-oxide (a-IGZO) channel was implemented by presynaptic stimulation. We also demonstrated synaptic weight changes through proton polarization, excitatory postsynaptic current modulations, and paired-pulse facilitation. According to the presynaptic stimulations, the magnitude of mobile proton polarization and the amount of weight change were quantified. Subsequently, the stable conductance modulation through repetitive potential and depression pulse was confirmed. Finally, we consider that proposed synaptic transistor is suitable for advanced micro-neural architecture because it overcomes the instability caused when using a single organic chitosan layer.

Ta2O5 Nanocrystals Strengthened Mechanical, Magnetic, and Radiation Shielding Properties of Heavy Metal Oxide Glass.

In this study, for the first time, diamagnetic 5d0 Ta5+ ions and Ta2O5 nanocrystals were utilized to enhance the structural, mechanical, magnetic, and radiation shielding of heavy metal oxide glasses. Transparent Ta2O5 nanocrystal-doped heavy metal oxide glasses were obtained, and the embedded Ta2O5 nanocrystals had sizes ranging from 20 to 30 nm. The structural analysis of the Ta2O5 nanocrystal displays the transformation from hexagonal to orthorhombic Ta2O5. Structures of doped glasses were studied through X-ray diffraction and infrared and Raman spectra, which reveal that Ta2O5 exists in highly doped glass as TaO6 octahedral units, acting as a network modifier. Ta5+ ions strengthened the network connectivity of 1-5% Ta2O5-doped glasses, but Ta5+ acted as a network modifier in a 10% doped sample and changed the frame coordination units of the glass. All Ta2O5-doped glasses exhibited improved Vicker's hardness, magnetization (9.53 × 10-6 emu/mol), and radiation shielding behaviors (RPE% = 96-98.8%, MAC = 32.012 cm2/g, MFP = 5.02 cm, HVL = 0.0035-3.322 cm, and Zeff = 30.5) due to the increase in density and polarizability of the Ta2O5 nanocrystals.

Surface plasmon resonance based fiber-optic nanosensor for the pesticide fenitrothion utilizing Ta2O5 nanostructures sequestered onto a reduced graphene oxide matrix.

A surface plasmon resonance study was carried out for the identification and determination of the organophosphate pesticide fenitrothion via an optical fiber sensor. A thin layer of silver was deposited on the unclad core of silica optical fiber for plasmon generation. This was followed by the deposition of a sensing surface comprising a layer of tantalum(V) oxide nanoparticles sequestered in a nano-scaled matrix of reduced graphene oxide. The sensing mechanism is due to the interaction of fenitrothion with the silver film which leads to a change in refractive index.. Characterized by a wavelength interrogation scheme, the fiber-optic sensor exhibited a red shift equalling 56 nm corresponding to fenitrothion concentration in the range 0.25-4 µM including the blank solution. The spectral sensitivity is 24 nm µM-1, the limit of detection is 38 nM, and the response time is as short as 23 s. The sensor is selective, repeatable and works at ambient temperature. Graphical abstractSchematic representation of the sensing mechanism of an SPR based fiber-optic fenitrothion sensor utilizing modification in refractive index of sensing surface comprising of tantalum(V) oxide (Ta2O5) nanoparticles embedded in reduced graphene oxide (rGO) caused by interaction with fenitrothion entities.

Performance Degradations of MISFET-Based Hydrogen Sensors with a Pd-Ta2O5-SiO2-Si Structure During Long-Term Operation.

We present the generalized experimental results of performance degradation of hydrogen sensors based on metal-insulator-semiconductor field effect transistor (MISFET)with the structure Pd-Ta2O5-SiO2-Si. The n-channel MISFET elements were fabricated on silicon single chips together with temperature sensors and heater-resistors by means of conventional -technology. Two hundred cycles of responses to different hydrogen concentrations were measured during eight weeks using special measuring and temperature stabilization circuitries with a feedback loop based on the chip's thermo-sensor and heater. We show how the response parameters change during long-term tests of sensors under repeated hydrogen impacts. There were two stages of time-dependent response instability, the degradation of which depends on operating conditions, hydrogen concentrations, and time. To interpret results, we proposed the models, parameters of which were calculated using experimental data. These models can be used to predict performances of MISFET-based gas analysis devices for long-term operation.

K-means Data Clustering with Memristor Networks.

Memristor-based neuromorphic networks have been actively studied as a promising candidate to overcome the von-Neumann bottleneck in future computing applications. Several recent studies have demonstrated memristor network's capability to perform supervised as well as unsupervised learning, where features inherent in the input are identified and analyzed by comparing with features stored in the memristor network. However, even though in some cases the stored feature vectors can be normalized so that the winning neurons can be directly found by the (input) vector-(stored) vector dot-products, in many other cases, normalization of the feature vectors is not trivial or practically feasible, and calculation of the actual Euclidean distance between the input vector and the stored vector is required. Here we report experimental implementation of memristor crossbar hardware systems that can allow direct comparison of the Euclidean distances without normalizing the weights. The experimental system enables unsupervised K-means clustering algorithm through online learning, and produces high classification accuracy (93.3%) for the standard IRIS data set. The approaches and devices can be used in other unsupervised learning systems, and significantly broaden the range of problems a memristor-based network can solve.

Determination of the Optimal Sensing Temperature in Pt/Ta2O5/MoO3 Schottky Contacted Nanobelt Straddling Heterojunction.

Nanostructured Schottky barrier gas sensors have emerged as novel semiconductor devices with large surface areas and unique electronic characteristics. Although it is widely known that operating these gas sensors requires heating to an optimal temperature for the highest sensitivity, the fundamental mechanism that governs the temperature-dependent sensitivity has yet been well understood. In this work, we present new evidence to support that thermionic field emission (TFE) is the dominant transport mechanism for Schottky contacted nanostructured heterojunction gas sensors at their optimal sensing temperature. Through the fabrication and characterization of Pt/MoO3 Schottky contacts, and Pt/Ta2O5/MoO3 heterojunctions, we found a previously unreported connection between TFE transport and optimal gas sensing temperature. This connection enables the description of Schottky barrier gas sensing performance using transport theory, which is a major step towards systematic engineering of gas sensors with nanostructured high-k oxide layers.

Direct Observation of Dual-Filament Switching Behaviors in Ta2 O5 -Based Memristors.

The Forming phenomenon is observed via in situ transmission electron microscopy in the Ag/Ta2 O5 /Pt system. The device is switched to a low-resistance state as the dual filament is connected to the electrodes. The results of energy dispersive spectrometer and electron energy loss spectroscopy analyses demonstrate that the filament is composed by a stack of oxygen vacancies and Ag metal.