Binary and Ternary Deep Eutectic Solvents for Methylene Green Electropolymerization on Multiwalled Carbon Nanotubes: Optimization, Characterization and Application.

Choline chloride (ChCl) based binary and ternary deep eutectic solvents (DES) were evaluated for methylene green electropolymerization with oxalic acid (OA) and ethylene glycol (EG) as hydrogen bond donors. Binary DES ChCl : OA in molar ratios 1 : 1 and 2 : 1 and ChCl : EG 1 : 2 and ternary DES (tDES) in different molar ratios and percentages of water were evaluated. The highest polymer growth was in ChCl : OA : EG-tDES with 13% added water, that had a lower viscosity and higher ionic conductivity when associated with HCl as dopant. This enhanced the formation of more cation radicals and, consequently, more polymer formation. The PMG/MWCNT/GCE-tDES sensor was successfully applied to the simultaneous determination of 5-aminosalicylic acid (5-ASA) and acetaminophen (APAP) by differential pulse voltammetry in the concentration range 1 µM-200 µM, with detection limits of 0.37 µM and 0.49 µM for 5-ASA and APAP, respectively. The sensor demonstrated good repeatability, reproducibility and stability, and was successfully applied in pharmaceutical formulations.

Chitosan/Polyvinyl Alcohol-Based Biofilms Using Ternary Deep Eutectic Solvents towards Innovative Color-Stabilizing Systems for Anthocyanins.

Anthocyanins are amazing plant-derived colorants with highly valuable properties; however, their chemical and color instability issues limit their wide application in different food industry-related products such as active and intelligent packaging. In a previous study, it was demonstrated that anthocyanins could be stabilized into green plasticizers namely deep eutectic solvents (DESs). In this work, the fabrication of edible films by integrating anthocyanins along with DESs into biocompatible chitosan (CHT)-based formulations enriched with polyvinyl alcohol (PVA) and PVA nanoparticles was investigated. CHT/PVA-DES films' physical properties were characterized by scanning electron microscopy, water vapor permeability, swelling index, moisture sorption isotherm, and thermogravimetry analysis. Innovative red-to-blue formulation films were achieved for CHT/PVA nanoparticles (for 5 min of sonication) at a molar ratio 1:1, and with 10% of ternary DES (TDES)-containing malvidin-3-glucoside (0.1%) where the physical properties of films were enhanced. After immersion in solutions at different pH values, films submitted to pHs 5-8 were revealed to be more color stable and resistant with time than at acidic pH values.

Preparation of lignin nanoparticles via ultra-fast microwave-assisted fractionation of lignocellulose using ternary deep eutectic solvents.

Lignin separation from natural lignocellulose for the preparation of lignin nanoparticles (LNPs) is often challenging owing to the recalcitrant and complex structure of lignocellulose. This paper reports a strategy for the rapid synthesis of LNPs via microwave-assisted lignocellulose fractionation using ternary deep eutectic solvents (DESs). A novel ternary DES with strong hydrogen bonding was prepared using choline chloride, oxalic acid, and lactic acid in a 1:0.5:1 ratio. Efficient fractionation of rice straw (0.5 × 2.0 cm) (RS) was realized by the ternary DES under microwave irradiation (680 W) within only 4 min, and 63.4% of lignin could be separated from the RS to prepare LNPs with a high lignin purity (86.8%), an average particle size of 48-95 nm, and a narrow size distribution. The mechanism of lignin conversion was also investigated, which revealed that dissolved lignin aggregated into LNPs via π-π stacking interactions.

Natural thymol-based ternary deep eutectic solvents: Application in air-bubble assisted-dispersive liquid-liquid microextraction for the analysis of tetracyclines in water.

Four new thymol-based ternary deep eutectic solvents were prepared and evaluated as the extractive phase in air-bubbles assisted dispersive liquid-liquid microextraction for extraction of tetracycline, doxycycline, and oxytetracycline from the water before high-performance liquid chromatography. The maximum extraction efficiencies were obtained using 400 µL of [choline chloride]:[thymol]:[nonanoic acid] in the molar ratio of 1:2:2 at pH = 5. The solvent was characterized by FTIR and NMR spectroscopy. The hydrophobicity of the deep eutectic solvent and its effect on the pH of water samples after mixing was also studied. Besides, the extraction efficiency of the ternary deep eutectic solvent was compared with that of two binary thymol-based deep eutectic solvents, including [choline chloride]:[thymol] and [thymol]:[nonanoic acid] at the same conditions. Under optimal conditions, limits of detection and quantification were 1.2-8.0 and 3.8-26.6 µg/L, respectively. The linear ranges were 18.2-500 µg/L for oxytetracycline, 26.6-500 µg/L for tetracycline, and 3.8-500 µg/L for doxycycline with the determination coefficients > 0.9912. Intra- and inter-day relative standard deviations were 1.2-3.8 and 7.7-11.2%, respectively. The developed method was applied to the analysis of tetracyclines in unspiked and spiked environmental water samples, and the obtained recoveries were 74.5-95.4% with relative standard deviations of 1.2-4.0%.

Synthesis of green magnetic molecularly imprinted polymers for selective extraction of rifaximin in milk samples.

In this study, a new analytical method was developed using magnetic molecularly imprinted polymers (MMIPs) by employing eco-friendly supramolecular ternary deep eutectic solvents to synthesize these MMIPs for selective extraction of rifaximin. The characterization analysis and adsorption affinity investigation were conducted. The results showed fast adsorption (15 min) with high adsorption capacity (43.20 mg g-1) and selectivity for rifaximin. Various extraction parameters were optimized, achieving recoveries ranging from 86.67% to 99.47% in spiked milk samples using high-performance liquid chromatography (HPLC). The detection and quantification limits were 0.01 mg L-1 and 0.03 mg L-1, respectively. The method exhibited low RSDs (<4.70%) and excellent selectivity, with MMIPs reusable up to seven times with only a 10% performance loss. This study proposes a convenient and reliable method for trace-level rifaximin extraction from milk using eco-friendly MMIPs.

Lignin extraction from acacia wood: Crafting deep eutectic solvents with a systematic D-optimal mixture-process experimental design.

Lignin is a complex biopolymer whose efficient extraction from biomass is crucial for various applications. Deep eutectic solvents (DES), particularly natural-origin DES (NADES), have emerged as promising systems for lignin fractionation and separation from other biomass components. While ternary DES offer enhanced fractionation performance, the role of each component in these mixtures remains unclear. In this study, the effects of adding tartaric acid (Tart) or citric acid (Cit) to a common binary DES mixture composed of lactic acid (Lact) and choline chloride (ChCl) were investigated for lignin extraction from acacia wood. Ternary Cit-based DES showed superior performance compared to Tart-based DES. Using a combined mixture-process D-Optimal experimental design, the Lact:Cit:ChCl DES composition and extraction temperature were optimized targeting maximum lignin yield and purity. The optimal conditions (i.e., Lact:Cit:ChCl, 0.6:0.3:0.1 molar ratio, 140 °C) resulted in a lignin extraction yield of 99.63 ± 1.24 % and a lignin purity of 91.45 ± 1.03 %. Furthermore, this DES exhibited feasible recyclability and reusability without sacrificing efficiency.

Preparation of fatty acid-based ternary deep eutectic solvents: Application for determination of tetracycline residue in water, honey and milk samples by using vortex-assisted microextraction.

Simple, rapid, low cost, selective, and sensitive analytical method was developed using fatty acid-based ternary deep eutectic solvents (TDESs) for extraction and determination of tetracycline in honey, milk and water samples by vortex assisted (VA) microextraction and UV-vis spectrophotometer. Four different TDES were prepared by combination of nonanoic acid, dodecanoic acid, decanoic, hexanoic acid, octanoic acid. Analytical parameters such as pH, TDES types and its molar ratio, dispersive solvent types and solvent volume and salt effect were optimized. VA-TDES method was good recovery of tetracycline in the samples from 94 to 99%. The LOD and LOQ values were found 1.0 and 3.3 µg L-1, respectively. The linear range of calibration graph was 3.3 -450 µg L-1. Intra-day and inter-day precision was found 2.8-4.1% and 3.6-5.2%. Enhancement factor was found 109. The factorial design was drawn to evaluate the significant level of factors and effects of variables on the recovery of tetracycline. Standard addition method was used for the validation and accuracy of the method. Present VA-TDES method was successfully applied to real samples.

Greener approach for synthesis of N,N,N-trimethyl chitosan (TMC) using ternary deep eutectic solvents (TDESs).

N,N,N-trimethyl chitosan (TMC), quaternized hydrophilic derivative of chitosan, has been projected to have wide applications in the pharmaceutical industry owing to its improved solubility at physiological conditions. However, the conventional synthesis of TMC involves toxic organic agents, which complicates its use for biological applications. Moreover, these reactions result into unwanted O-methylation and scission of the parent polymer. In the present study we have addressed these limitations by employing a green approach to synthesize TMC, by using lipase as the biocatalyst and dimethyl carbonate (DMC) as the green methylating agent, in a reaction medium comprising of ternary deep eutectic solvents (TDESs). Synthesis of TMC was carried out by using two different lipases from Burkholderia cepacia and Candida rugosa. The resulting TMC was characterized by using FTIR, 1H NMR, DSC, XRD. Methylation was confirmed by FTIR analysis (-CH at 1666 cm-1) and 1H NMR (?? = 3.3 ppm). DSC study revealed a lower thermal stability of TMC as compared to chitosan. These results indicated the possibility of using DMC as a green methylating agent, along with TDESs as green and sustainable solvents, for lipase catalyzed reactions. TMC was successfully synthesized and exhibited a degree of quaternization of about 12.5%, 15.69%, when synthesized used lipases from Burkholderia cepacia and Candida rugosa, respectively.

A green air assisted-dispersive liquid-liquid microextraction based on solidification of a novel low viscous ternary deep eutectic solvent for the enrichment of endocrine disrupting compounds from water.

A green air-assisted dispersive liquid-liquid microextraction based on floating organic droplet solidification (DLLME-SFOD) was introduced for the enrichment of five endocrine disrupting compounds (EDCs) from water using a ternary deep eutectic solvent (TDES) as an extracting solvent prior to their determination by HPLC-PDA. The eutectic solvents were synthesized by combining various fatty acids which can concurrently act as both hydrogen bond acceptors (HBA) and hydrogen bond donors (HBD). Adding a third component to classical two-component eutectic solvents allows to purposefully control density, melting point, and viscosity of the synthesized solvents. Ternary and binary eutectic solvents with C9 acid provided excellent extraction efficiency in comparison with other eutectic solvents with C8 acid, while ternary solvents provided superior extraction efficiency to binary ones. Different variables that could influence the microextraction efficiency were optimized applying central composite face-centered design (CCF). At the optimum conditions, the method had low detection limits ranging from 0.96-2.30 µg/L with a preconcentration up to 134-folds. The method showed good linearity from the linear regression with an excellent correlation coefficient (r2 > 0.999). A good inter- and intraday precision (%RSD < 7%) and%recovery > 90% were achieved proving the method high precision and accuracy. Furthermore, the potential of using the TDES for determining the EDCs from five real water samples was proved through the higher extraction efficiency of the EDCs (90.06-104.43%) with results uncertainty < 20% for most of the compounds. Finally, the method greenness was evaluated by Raynie pictogram, analytical eco-scale, and Green Analytical Procedure Index (GAPI) approaches which confirm the superior eco-friendship of our method in comparison with other reported methods.