Predicting the propene stereoselectivity on transition metal catalysts: A daunting task for density functional theory.

Thanks to recent developments in hardware and software, quantum chemical methods are increasingly used for interpreting the complex mechanisms underlying polymerization reaction by homogeneous catalysis. Unfortunately, the dimensions of even the smallest realistic models are too large to permit the use of state-of-the-art composite wave function methods. Under these circumstances, density functional theory still offers the best compromise between cost and accuracy. However, comprehensive benchmarks of different functionals are not yet available for this important research field. The main aim of the present paper is to fill this gap by performing an unbiased comparison of several density functionals and continuum solvent models for the stereo-control in the propylene polymerization on prototypical catalysts inducing different reaction mechanisms. While it was not possible to define a unique computational protocol providing the best results in all the situations, the B3PW91 functional in conjunction with D3 empirical dispersions and the solvent model density solvent model performs remarkably well for three out of the four investigated catalysts. Under such circumstances, it is recommended to compare the results delivered by different models when approaching additional classes of catalysts.

Converting Carbon Dioxide into Carbon Nanotubes by Reacting with Ethane.

The urgency to mitigate environmental impacts from anthropogenic CO2 emissions has propelled extensive research efforts on CO2 reduction. The current work reports a novel approach involving transforming CO2 and ethane into carbon nanotubes (CNTs) using earth-abundant metals (Fe, Co, Ni) at 750 °C. This route facilitates long-term carbon storage via generating high-value CNTs and produces valuable syngas with adjustable H2/CO ratios as byproducts. Without CO2, direct pyrolysis of ethane undergoes rapid deactivation. The participation of CO2 not only enhances the durability of the catalyst, but also contributes about 30 % of the CNTs production, presenting a viable solution to CO2 challenges. The CNT morphology depends on the catalyst used. Co- and Ni-based catalysts produce CNT with a 20 nm diameter and micrometer length, whereas Fe-based catalysts yield bamboo-like structures. This work represents a pioneering effort in utilizing CO2 and ethane for CNT production with potential environmental and economic benefits.

Transition-Metal-Catalyzed Denitrogenative Annulation to Access High-Valued N-Heterocycles.

Over the past few years, the development of efficient methods to construct high-valued N-heterocyclic molecules have received massive attention owing to their extensive application in the areas of medicinal chemistry, drug discovery, natural product synthesis and so on. To access those high-valued N-heterocycles, many methods have been developed. In this context, transition-metal-catalyzed denitrogenative annulation of 1,2,3-triazoles and 1,2,3,4-tetrazoles has appeared as a powerful synthetic tool because it offers a step- and atom-economical route for the preparation of the nitrogen-rich molecules. Compared with the denitrogenative annulation of various 1,2,3-triazole frameworks, annulation of 1,2,3,4-tetrazole remains more challenging due to the inertness of the tetrazole moiety. This Review summarizes the significant achievements made in the field of denitrogenative annulation of various 1,2,3-triazoles and 1,2,3,4-tetrazoles including some pioneering examples in this area of research. We anticipate that this denitrogenative annulation reaction will find broad applications in the pharmaceutical industry, drug discovery and other fields of medicinal chemistry.

Counting d-Orbital Vacancies of Transition-Metal Catalysts for the Sulfur Reduction Reaction.

The electrocatalytic sulfur reduction reaction (SRR) would allow the production of renewable high-capacity rechargeable lithium-sulfur (Li-S) batteries using sustainable and nontoxic elemental sulfur as a cathode material, but its slow reaction rate causes a serious shuttle effect and dramatically reduces the capacity. We found that a catalyst composed of Pd nanoparticles supported by ordered mesoporous carbon (Pd/OMC) had a high reaction rate in the SRR, and a Li-S battery assembled with this catalyst had a low shuttle constant of 0.031 h-1 and a high-rate performance with a specific capacity of 1527 mAh g-1 at 0.1 C which is close to the theoretical value. The high activity of Pd/OMC with a d-orbital vacancy of 0.87 e was predicted from a volcano relationship between the d charge for the metal and the adsorption activation entropy and reaction rate for the SRR by examining Pd, Au, Pt, Rh, and Ru transition-metal nanocatalysts. The strategy of using a single electronic structure descriptor to design high-efficiency SRR catalysts has suggested a way to produce practical Li-S batteries.

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization.

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (Fn ; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (Mw =8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (Mw =20-50 kDa).

Transition Metal-Catalyzed C-H Oxidation of Saturated Hydrocarbons with Molecular Oxygen.

The C-H oxidation of saturated hydrocarbons to the corresponding alcohols and ketones can be performed efficiently at room temperature with molecular oxygen (1 atm) in the presence of acetaldehyde and catalysts such as Fe, Cu(OH)2 , and CuCl2 -18-crown-6 complex. Moreover, extremely high turnover numbers (>27,000) have been obtained for the C-H oxidation of saturated hydrocarbons with molecular oxygen (1 atm) using a combination of Cu(OAc)2 and acetonitrile at 70 °C. Related oxidation reactions such as epoxidation, Baeyer-Villiger reaction, acetoxylation of ß-lactams with molecular oxygen and a suitable aldehyde at room temperature are described.

Catalytic Cleavage of Amide C-N Bond: Scandium, Manganese, and Zinc Catalysts for Esterification of Amides.

Amide C-N bonds are thermodynamically stable and their fission, such as by hydrolysis and alcoholysis, is considered a long-challenging organic reaction. In general, stoichiometric chemical transformations of amides into the corresponding esters and acids require harsh conditions, such as strong acids/bases at a high reaction temperature. Accordingly, the development of catalytic reactions that cleave not only primary and secondary amides, but also tertiary amides in mild conditions, is in high demand. Herein, we surveyed typical stoichiometric transformations of amides, and highlight our recent achievements in the catalytic esterification of amides using scandium, manganese, and zinc catalysts, together with some recent catalyst systems using late-transition metal reported by other groups.

Recent Advances in Transition Metal-Catalyzed Functionalization of gem-Difluoroalkenes.

gem-Difluorinated alkenes are readily accessible building blocks that can undergo functionalization to provide a broad spectrum of fluorinated and non-fluorinated products. Herein, we review recent (since 2017) transition metal-catalyzed transformations of these specialized alkenes and summarize general reactivity patterns of these reactions. Many transition metal-catalyzed reactions undergo net C-F bond functionalization reactions to deliver monofluorinated products. These reactions typically proceed through ß-fluoro alkylmetal intermediates that readily eliminate a ß-fluoride to deliver monofluoroalkene products. A second series of reactions exploit coinage metal fluorides to add F- to the gem-difluorinated alkene, and further functionalization delivers trifluoromethyl-containing products. In stark contrast, few transition metal-catalyzed reactions proceed in net "fluorine-retentive processes" to deliver difluoromethylene-based products.

Homocoupling Reactions of Azoles and Their Applications in Coordination Chemistry.

Pyrazole, a member of the structural class of azoles, exhibits molecular properties of interest in pharmaceuticals and materials chemistry, owing to the two adjacent nitrogen atoms in the five-membered ring system. The weakly basic nitrogen atoms of deprotonated pyrazoles have been applied in coordination chemistry, particularly to access coordination polymers and metal-organic frameworks, and homocoupling reactions can in principle provide facile access to bipyrazole ligands. In this context, we summarize recent advances in homocoupling reactions of pyrazoles and other types of azoles (imidazoles, triazoles and tetrazoles) to highlight the utility of homocoupling reactions in synthesizing symmetric bi-heteroaryl systems compared with traditional synthesis. Metal-free reactions and transition-metal catalyzed homocoupling reactions are discussed with reaction mechanisms in detail.

Sub-10-nm-sized Au@AuxIr1-x metal-core/alloy-shell nanoparticles as highly durable catalysts for acidic water splitting.

The absence of efficient and durable catalysts for oxygen evolution reaction (OER) is the main obstacle to hydrogen production through water splitting in an acidic electrolyte. Here, we report a controllable synthesis method of surface IrOx with changing Au/Ir compositions by constructing a range of sub-10-nm-sized core-shell nanocatalysts composed of an Au core and AuxIr1-x alloy shell. In particular, Au@Au0.43Ir0.57 exhibits 4.5 times higher intrinsic OER activity than that of the commercial Ir/C. Synchrotron X-ray-based spectroscopies, electron microscopy and density functional theory calculations revealed a balanced binding of reaction intermediates with enhanced activity. The water-splitting cell using a load of 0.02 mgIr/cm2 of Au@Au0.43Ir0.57 as both anode and cathode can reach 10 mA/cm2 at 1.52 V and maintain activity for at least 194 h, which is better than the cell using the commercial couple Ir/C‖Pt/C (1.63 V, 0.2 h).

Tandem aldehyde-alkyne-amine coupling/cycloisomerization: A new synthesis of coumarins.

Cu-catalyzed A(3) coupling of ethoxyacetylene, pyrrolidine and salicylaldehydes led to a concomitant cycloisomerization followed by hydrolysis of the resultant vinyl ether to afford coumarins in a cascade process. The reaction proceeded through exclusive 6-endo-dig cyclization and is compatible with halo and keto groups giving coumarins in good to moderate yields.

Protein-supported transition metal catalysts: Preparation, catalytic applications, and prospects.

The immobilization of transition metal catalysts onto supports enables their easier recycling and improves catalytic performance. Protein supports not only support and stabilize transition metal catalysts but also enable the incorporation of biocompatibility and enzymatic catalysis into these catalysts. Consequently, the engineering of protein-supported transition metal catalysts (PTMCs) has emerged as an effective approach to improving their catalytic performance and widening their catalytic applications. Here, we review the recent development of the preparation and applications of PTMCs. The preparation of PTMCs will be summarized and discussed in terms of the types of protein supports, including proteins, protein assemblies, protein-polymer conjugates, and cross-linked proteins. Then, their catalytic applications including organic synthesis, photocatalysis, polymerization, and biomedicine, will be surveyed and compared. Meanwhile, the established catalytic structures-function relationships will be summarized. Lastly, the remaining issues and prospects will be discussed. By surveying a wide range of PTMCs, we believe that this review will attract a broad readership and stimulate the development of PTMCs.

Biodegradable Antibacterial Bioorthogonal Polymeric Nanocatalysts Prepared by Flash Nanoprecipitation.

Bioorthogonal activation of pro-dyes and prodrugs using transition-metal catalysts (TMCs) provides a promising strategy for imaging and therapeutic applications. TMCs can be loaded into polymeric nanoparticles through hydrophobic encapsulation to generate polymeric nanocatalysts with enhanced solubility and stability. However, biomedical use of these nanostructures faces challenges due to unwanted tissue accumulation of nonbiodegradable nanomaterials and cytotoxicity of heavy-metal catalysts. We report here the creation of fully biodegradable nanocatalysts based on an engineered FDA-approved polymer and the naturally existing catalyst hemin. Stable nanocatalysts were generated through kinetic stabilization using flash nanoprecipitation. The therapeutic potential of these nanocatalysts was demonstrated through effective treatment of bacterial biofilms through the bioorthogonal activation of a pro-antibiotic.

NiCo layered double hydroxides/NiFe layered double hydroxides composite (NiCo-LDH/NiFe-LDH) towards efficient oxygen evolution in different water matrices.

Engineering robust non-noble metal electrocatalysts towards efficient impure water (e.g., seawater, wastewater) oxidation is a prospective approach to achieve carbon neutrality via accelerating green hydrogen energy development. Herein, a NiCo layered double hydroxides (LDH)/NiFe LDH composite (NiCo-LDH/NiFe-LDH) was developed for oxygen evolution reaction (OER) via a hydrothermal process-electrodeposition method. The optimal NiCo-LDH/NiFe-LDH-30 composite only needed an overpotential (η) of 240 mV to drive 100 mA/cm2 in alkalized freshwater, with a low Tafel slope of 16.6 mV/dec and good stability for over 90 h. Further analyses suggested that the strong interface interaction between NiCo-LDH and NiFe-LDH accelerated the oxygen gas bubble evolution and boosted interfacial charge transfer, and the formed built-in electric field and higher oxidation state species (metal oxyhydroxides) contributed to the high intrinsic catalytic activity. The NiCo-LDH/NiFe-LDH-30 composite also held excellent OER activities in different impure water environments, including alkaline 0.5 M NaCl solution (η100 = 333 mV), alkaline lake water (η100 = 345 mV), and alkaline wastewater treatment plant (WWTP) effluent (η100 = 320 mV). More importantly, the potential effects of Cl- and CO32- in impure water were revealed during the OER process. This work elaborates on the role of built-in electric field and the strong coupling interaction in composite catalysts, which pave the way for the design of cost-effective catalysts with excellent adaptability in different water environments.

Preparation of graphene-based catalysts and combined DBD reactor for VOC degradation.

The objective of this study was to compare the transformation of by-products between single dielectric barrier discharge (SDBD) and double dielectric barrier discharge (DDBD), to optimize the preparation of graphene-based catalysts and apply them in combination with DBD for volatile organic compound degradation. We compared the degradation performance of SDBD and DDBD, prepared, and characterized graphene-based catalysts. SEM, BET, XRD, and FTIR analyses showed that the morphologies and internal structures of the three catalysts were the best when 0.25 mL of [BMIM]PF6 was added. When MnOx/rGO, FeOx/rGO, and TiOx/rGO were used in combination with DDBD, the degradation rates of benzene were found to be 83.5%, 77.2%, and 63.8%, respectively, whereas the O3 transformation rates were 60%, 79%, and 40%, respectively. Moreover, the NO2 transformation rates were 70%, 55%, and 42.5%, respectively, whereas the NO transformation rates were 69%, 39%, and 33.5%, respectively. The CO2 selectivity was 62%, 51%, and 49%, respectively. MnOx/rGO exhibited superior performance in the degradation of benzene series, NO transformation, NO2 transformation, CO2 selectivity, and energy efficiency. On the other hand, FeOx/rGO exhibited superior performance for O3 transformation. Based upon the XPS analysis, it was found that Mn3O4 and Fe3O4 played a leading role in promoting the degradation of benzene series and the transformation of by-products.

Computational analysis of the formation mechanisms of carbazoles.

Gold-, platinum-, and silver-catalyzed formation mechanisms of carbazole alkaloids were investigated computationally. The structural properties of the reactants were studied in various solvents and with different functionals. The hybrid functionals B3LYP and M06-2X in density functional theory were used to determine and discuss the energetics of the compounds. The electronic properties of groups attached to the terminal alkyne played an essential role in the formation of carbazoles. The stereo- and chemoselectivity of the mechanism were investigated and the natural bond orbitals of the reactants were determined. Furthermore, this theoretical study has suggested a gold-catalyzed alternative mechanism for the synthesis of 1,4-dihydrocyclopenta[b]indole derivative.

Engineered Polymer-Supported Biorthogonal Nanocatalysts Using Flash Nanoprecipitation.

Transition-metal catalysts (TMCs) effect bioorthogonal transformations that enable the generation of therapeutic agents in situ, minimizing off-target effects. The encapsulation of insoluble TMCs into polymeric nanoparticles to generate "polyzymes" has vastly expanded their applicability in biological environments by enhancing catalyst solubility and stability. However, commonly used precipitation approaches provide limited encapsulation efficiency in polyzyme fabrication and result in a low catalytic activity. Herein, we report the creation of polyzymes with increased catalyst loading and optimized turnover efficiency using flash nanoprecipitation (FNP). Polyzymes with controlled size and catalyst loading were fabricated by tuning the process conditions of FNP. The biological applicability of polyzymes was demonstrated by efficiently transforming a non-toxic prodrug into the active drug within cancer cells.

Graphene oxide wrapped Mix-valent cobalt phosphate hollow nanotubes as oxygen evolution catalyst with low overpotential.

Development of an efficient, stable and inexpensive catalyst for oxygen evolution reaction (OER) is critical to electrochemical water splitting. In this regard, a precious-metal free electrocatalyst has been synthesized employing a hydrothermal route. The prepared graphene oxide wrapped cobalt phosphate nanotubes deposited on Ni foam electrode shows a low overpotential of 234 mV at a current density of 10 mA/cm2 for OER in 1(M) KOH, lower than a benchmarking electrocatalyst IrO2 at the same current density. The performance figures clearly defy the volcano limitations. The mixed-valency induced delocalization of charge satisfies Sabatier Principle for ideal catalysts and graphene oxide ensures improved charge transfer. Moreover, the designed electrocatalyst performs efficiently even on prolonged use under mass transfer limitation conditions.

Boosting CO2 methanation on ceria supported transition metal catalysts via chelation coupled wetness impregnation.

The incipient wetness impregnation (IWI) method is widely used in the preparation of supported transition metal catalysts for its high throughput and cost-effective synthesis, yet suffers from poor metal-support interaction, restricting its further application at an industrial scale. Herein, a universal strategy of chelation coupled impregnation (CCI) is presented. The as-prepared Ni/CeO2(CCI) showed superior catalytic performance for CO2 conversion (84.3%) and CH4 selectivity (100%) under the experimental conditions (WGHSV = 24,000 mL g-1 h-1 and H2/CO2 = 4:1) even at low temperatures (T = 275 °C). The surface characterization results confirmed that the agglomeration of metal active sites in Ni/CeO2(CCI) was restricted and more surface oxygen vacancies were generated on CeO2. Further, the in-situ diffuse reflectance infrared Fourier transform spectroscopy (in-situ DRIFTS) analysis suggested that the surface oxygen vacancies that served as active sites could facilitate the direct dissociation of CO2 more favorably than the associative route, thus significantly promoting CO2 methanation activity.

Oxidation of organic micropollutant surrogate functional groups with peracetic acid activated by aqueous Co(II), Cu(II), or Ag(I) and geopolymer-supported Co(II).

Peracetic acid (PAA) in combination with transition metals has recently gained increasing attention for organic micropollutant abatement. In this study, aqueous Co(II), Cu(II), and Ag(I) were compared for their capacity to activate PAA. Co(II) outperformed Cu(II) or Ag(I) and the optimum conditions were 0.05 mM of Co(II), 0.4 mM of PAA, and pH 3. However, due to a wider applicability in water treatment, pH 7 (i.e., bicarbonate buffer) was selected for detailed investigations. The abatement of different micropollutant surrogates could be described with a second-order rate equation (observed second-order rate constants, kobs were in the range of 42-132 M-1 s-1). For the para-substituted phenols, there was a correlation between the observed second-order rate constants of the corresponding phenolates and the Hammett constants (R2 = 0.949). In all oxidation experiments, the reaction rate decreased significantly after 1-2 min, which coincided with the depletion of PAA but also with the deactivation of the Co(II) catalyst by oxidation to Co(III) and subsequent precipitation. It was demonstrated that Co(II) immobilized on a geopolymer-foam performed approximately similarly as aqueous Co(II) but without deactivation due to Co(III) precipitation. This provides a potential option for the further development of heterogeneous catalytic Co(II)/PAA advanced oxidation processes utilizing geopolymers as a catalyst support material.