Quenching singlet oxygen via intersystem crossing for a stable Li-O2 battery.

Aprotic Li-O2 batteries are a promising energy storage technology, however severe side reactions during cycles lead to their poor rechargeability. Herein, highly reactive singlet oxygen (1O2) is revealed to generate in both the discharging and charging processes and is deterimental to battery stability. Electron-rich triphenylamine (TPA) is demonstrated as an effective quencher in the electrolyte to mitigate 1O2 and its associated parasitic reactions, which has the tertiary amine and phenyl groups to manifest excellent electrochemical stability and chemical reversibility. It reacts with electrophilic 1O2 to form a singlet complex during cycles, and it then quickly transforms to a triplet complex through nonradiative intersystem crossing (ISC). This efficiently accelerates the conversion of 1O2 to the ground-state triplet oxygen to eliminate its derived side reactions, and the regeneration of TPA. These enable the Li-O2 battery with obviously reduced overvoltages and prolonged lifetime for over 310 cycles when coupled with a RuO2 catalyst. This work highlights the ISC mechanism to quench 1O2 in Li-O2 battery.

Design of Triphenylamine-based D-π-A Systems for Efficient Ternary WORM Memory Devices.

The impact of various substituent moieties on the molecular framework of a conjugated D-A system in resistive switching memory property has been scrutinized through an array of novel D-π-A molecules. The synthesized molecules with triphenylamine (TPA) as the electron donor and dicyanovinylindanone (IC) as the electron acceptor demonstrated substantial non-volatile WORM (Write-Once Read-Many) memory behaviour with appreciable ON/OFF current ratios up to 105 and a lowest recorded threshold voltage of -0.80 V. The well-balanced combination of these potent electron donating and accepting units culminated in exceptional intramolecular charge transfer interactions and minimal band gap values (1.82-2.31 eV) for the molecules, as demonstrated by photophysical and electrochemical investigations. These factors, coupled with the thin-film morphological studies, corroborated the superior performance of the fabricated devices. A longer retention time of 2000s and an endurance of 100 cycles mark the substantial stability of the memory devices. Moreover, conversion from binary to ternary WORM memory was achieved by the effective tuning of the electronic properties of the D-A systems by various substituent moieties. Molecular simulation studies revealed that the resistive switching phenomenon arises from a synergistic interplay of charge transfer and charge trapping processes within these D-A systems.

Construction of Multifunctional Covalent Organic Frameworks for Photocatalysis.

Covalent organic frameworks (COFs) have recently drawn intense attention due to their potential applications in photocatalysis. Herein, we report a multifunctional COF which consists of triphenylamine (TPA) and 2,2'-bipyridine (2, 2'-bipy) entities. The obtained TAPA-BPy-COF is a heterogeneous photocatalyst and can efficiently catalyze the oxidative coupling of thiols to disulfides. In addition, TAPA-BPy-COF can be further metalated by Pd(II) via 2,2'-bipy-metal coordination. The generated Pd@TAPA-BPy-COF can highly promote photocatalytic synthesis of 3-cyanopyridines via cascade addition/cyclization of arylboronic acids with γ-ketodinitriles in heterogeneous way. This work has demonstrated the way for the rational design and preparation of more efficient photoactive COFs for photocatalysis.

Investigating the Properties of Triangle Terthiophene and Triphenylamine Configured Propeller-like Photochromic Dye with Ethyne Bridge.

Synthesis-oriented design led us to the construction of a propeller-like dye, containing the triangle terthiophene and triphenylamine units. It reveals typical photochromic properties with alternated UV (390 nm) and visible light (˃ 440 nm) irradiation and the dye solution (in THF) color was also toggled between yellow-green and colorless. A new absorption band was observed in visible region (415-600 nm). Additionally, the photochromic dye was highly emissive with the absolute quantum yield being 0.27. After UV light irradiation, the emission was quenched significantly (Φ = 0.08) at photo-stationary state, and thus establishing a switchable emission "on-off" system by alternated UV/visible light irradiation cycle. Detailed structural analysis was carried out based on the optimized dye structure. Both the antiparallel conformation and the distance of reactive carbon atoms (< 4.2 Å) led to the smoothly photochromic behavior.

Synthesis and Photophysical Properties of Bipolar Compound: Triphenylamine/Diazafluorene-Carbazole.

Carbazole and triphenylamine, are two well-known hole transporting units that are attached to electron transporting unit 4,5-diazafluorene in a fascinating way to bring out non-planar configuration of a molecule. The synthesized compound exhibits good thermal stability (Td > 515 °C) and high glass transition temperature (Tg, 191 °C). Optical bandgap (Egopt) obtained from solid state absorption spectra was calculated to be 2.93 eV. Solid state photoluminescence spectra displays the emission maxima at 473 nm. The emission characteristics of the compound observed in solvents of different polarity confirms the existence of intramolecular charge transfer in their excited state. Density functional theory studies reveal that HOMO and HOMO-1 localized on triphenylamine is spatially separated from LUMO of 4,5-diazafluorene, which manifest its bipolar character. The realization of long lived charge separated state upon photo-excitation from time resolved photoluminescence studies ascertains the charge transfer from triphenylamine to 4,5-diazafluorene. The experimental and theoretical analysis of the compound proved it to be a promising candidate for the fabrication of OLED devices.

New Butterfly-Shaped Naphthalimide-Based AIE Gens: Synthesis and Photophysical Properties.

Two novel naphthalimide derivatives PTZNI-Cz and PTZNI-TPA were successfully designed and synthesized, in which phenothiazine, triphenylamine and carbazole were used as electron donors and naphthalimide was used as the electron acceptor. Their photophysical, electrochemical, and thermal properties were investigated. These derivatives showed remarkable aggregation-induced emission (AIE) effect. Furthermore, the maximum emission peaks of PTZNI-Cz and PTZNI-TPA in the thin film state are at 610 nm and 623 nm respectively, which is typical of red fluorescent materials.

Selective and Sensitive Detection of Fe3+ Ions Using a Red-Emissive Fluorescent Probe Based on Triphenylamine and Perylene-Linked Conjugated Microporous Polymer.

The Expansion of modern industry underscores the urgent need to address heavy metal pollution, which is a threat to human-health and environment. Efforts are underwent to develop precise technologies for detecting heavy metal ions (M+-ion). One promising approach involves the use of Conjugated Microporous Polymers (CMPs) modified with Triphenylamine (TPA) anderylene (Peryl), known as TPA-Peryl-CMP, which emits strong refluorescence. Various analytical techniques, such as Brunauer-Emmett-Teller analysis, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA), are utilized to characterize the synthesized TPA-Peryl-CMP and understand its functional properties. In addition to its remarkable fluorescence behavior, TPA-Peryl-CMP shows promise as a sensor for Fe3+ ions using a turn-off strategy. Due to its exceptional stability and robust π-electron system, this platform demonstrates remarkable sensitivity and selectivity, significantly improving detection capabilities for specific analytes. Detailed procedures related to the mechanism for detecting Fe3+ ions are outlined for sensing Fe3+ ions, revealing a notably strong linear correlation within the concentration range of 0-3 µM, with a correlation coefficient of 0.9936 and the Limit of detection (LOD) 20 nM. It is anticipated that development of such a kind of TPA-Peryl-CMP will observe broader applications in detecting various analytes related to environmental and biological systems.

Bridged triphenylamine-based fluorescent probe for selective and direct detection of HSA in urine.

Human serum albumin (HSA) serves as a crucial indicator for therapeutic monitoring and biomedical diagnosis. In this study, a near infrared (NIR) fluorescent probe, termed BTPA, characterized a donor-π-acceptor (D-π-A) structure based on bridged triphenylamine (TPA) was developed. BTPA exhibited outstanding sensitivity and selectivity towards HSA among various analysts, with a remarkable 50-fold fluorescence enhancement with a significant Stokes shift (∼190 nm) and a wide linear detection range of 0-20 µM of HSA. Especially, BTPA displayed selectivity for discrimination of HSA from BSA. Job's Plot analysis suggested a 1:1 stoichiometry for the formation of the BTPA-HSA complex. Displacement assays and molecular docking demonstrated that BTPA binds to subdomain IB of HSA which could effectively avoid interference from most drugs. Besides, BTPA have good biocompatibility and could detect of exogenous HSA with a relatively low fluorescence background. For practical applications, BTPA was tested for detecting HSA levels in human urine without any pretreatment, showing detection capability in the range of 0-10 µM with a fast response (<30 s), a limit of detection (LOD) of 0.12 µM and good recoveries (81.7-92.9 %), highlighting the high performance of bridged triphenylamine-based probe BTPA.

A triphenylamine-based carbohydrazide hydrazone fluorescent probe for selective detection of hypochlorite and sensing acidic gases.

Hypochlorous acid and its hypochlorite are important reactive oxygen species in the body, and are involved in various physiological processes related to immunity; their rapid detection is of great significance. Here, we synthesized a fluorescent probe (TPAS) by condensation of 4-(diphenylamino)benzaldehyde, carbohydrazide, and salicylaldehyde, which can be used for the detection of ClO- in water and sensing of acidic gas in its solid state. The probe showed strong selective recognition of ClO- in acetonitrile and good tolerance to interference ions. There were good linear responses between the intensity of absorbance and fluorescence and the amount of ClO-. The TPAS solid and its paper strips can emit red fluorescence when exposed to volatile acidic vapours. After being treated with NH3, the red fluorescence can be restored to yellow. The response process of TPAS to ClO- and acid gases was characterized using nuclear magnetic resonance, electrospray ionisation mass spectrometry, transmission electron microscopy, and density functional theory calculations. Furthermore, it can be utilized in analyzing ClO- in commercially available bleaching products; the detection results were basically compatible with the labelled values. In addition, the probe is biocompatible and can be applied for imaging ClO- in zebrafish.

Manifesting the multi-stimuli-responsive behaviour of triazole-substituted triphenylamine.

The development of multi-stimuli-responsive (MSR) materials is a tempting yet intriguing challenge due to the absence of a defined design approach. In this study, we designed and synthesised two compounds based on triphenylamine, namely, TPA-Tz1 and TPA-Tz2. The photoluminescent investigations reveal the MSR behaviour of both compounds. TPA-Tz1 shows reversible mechanochromism with a blue-shifted emission due to changes in intermolecular interactions. Furthermore, both compounds exhibit solvatochromism in solvents of varying polarity. Detailed studies suggest that solvatochromism in TPA-Tz1 can be attributed to twisted intramolecular charge transfer (TICT), while in TPA-Tz2, it is due to intramolecular charge transfer (ICT). Additionally, both compounds display acidochromic properties in solution as well as in the solid state due to the protonation of the triazole ring. All changes in emissions are corroborated through theoretical calculations. The results provide insights into the intricate interplay of molecular interactions and structural rearrangements that contribute to the compound's multifaceted responsiveness.

Synthesis and Application of Salicylhydrazone Probes with High Selectivity for Rapid Detection of Cu2.

Using the aldehyde amine condensation procedure and the triphenylamine group as the skeleton structure, the new triphenylamine-aromatic aldehyde-succinylhydrazone probe molecule DHBYMH was created. A newly created acylhydrazone probe was structurally characterized by mass spectrometry (MS), NMR, and infrared spectroscopy (FTIR). Fluorescence and UV spectroscopy were used to examine DHBYMH's sensing capabilities for metal ions. Notably, DHBYMH achieved a detection limit of 1.62 × 10-7 M by demonstrating exceptional selectivity and sensitivity towards Cu2+ ions in an optimum sample solvent system (DMSO/H2O, (v/v = 7/3); pH = 7.0; cysteine (Cys) concentration: 1 × 10-4 M). NMR titration, high-resolution mass spectrometry analysis, and DFT computation were used to clarify the response mechanism. Ultimately, predicated on DHBYMH's reversible identification of Cu2+ ions in the presence of EDTA, a molecular logic gate was successfully designed.

Novel Star-Shaped Viologens Containing Phenyl and Triphenylamine Moieties for Electrochromic Applications.

The two star-shaped viologens containing 1,3,5-substituted phenyl (1) and triphenylamine (2) central cores and n-hexyl chains were synthesized and characterized. Both compounds exhibited promising optoelectronic properties and underwent multiple oxidation/reduction processes resulting in various colors. Four possible redox states of tripyridium salt containing a phenyl or triphenylamine core can occur depending on the applied potentials. The wide color range, from colorless through blue, azure to green-gray, was observed during the electrochemical reduction of compound 1. In the case of compound 2, the color change observed during spectroelectrochemical measurements was from yellow to colorless during the cathodic process and from yellow to green during the anodic process. The observed color change for both viologens was reversible. The triphenylamine-cored viologen (2) also exhibited emission in visible range and solvatochromism. It also exhibited luminescence in the solid state when excited with a UV lamp. These studies provide insights into the design of advanced materials for applications in displays.

Triphenylamine[3]arenes: Streamlining Synthesis of a Versatile Macrocyclic Platform for Supramolecular Architectures and Functionalities.

Triphenylamine[3]arenes (TPA[3]s), featuring [16]paracyclophane backbone with alternating carbon and nitrogen bridging atoms, were synthesized through a BF3 ⋅ Et2O-catalyzed cyclization reaction using triphenylamine derivatized monomers and paraformaldehyde. This molecular design yielded a series of TPA[3] macrocycles with high efficiency, with their facile derivatizations also successfully demonstrated. On account of the strong electron-donating properties of the TPA moieties, these TPA[3]s exhibit remarkable delayed fluorescence, and possess a significant affinity for iodine. Furthermore, their inherent three-fold symmetry rendered TPA[3]s as novel building blocks for the construction of extended frameworks and molecular cages. This advancement expands the versatility of discrete macrocycles into complex architectures, enhancing their applicability across a broad spectrum of applications.

Novel Pyrimidine-Based Iridium Complexes with Bulky Charge-Carrier Groups as Dopants for Highly Efficient Green Polymer Light-Emitting Diodes.

Two new pyrimidine-based iridium complexes with triphenylamine and tetraphenylsilane, namely (TPAPr)2 IrAcac and (TPSPr)2 IrAcac, were fully synthesized and characterized. Both of the targeted iridium complexes exhibit excellent thermal stability and high photoluminescence quantum yields. Compared to (TPAPr)2 IrAcac, (TPSPr)2 IrAcac achieved its highest PLQY and current efficiency (CE) at higher dopant concentration probably because of its bulky tetraphenylsilane group, which can effectively suppress the concentration quenching. However, according to DFT studies, (TPSPr)2 IrAcac shows faster non-radiative transitions due to the presence of more excited-state distortions than (TPAPr)2 IrAcac. As a result, Green phosphorescent polymer light-emitting diodes (PLEDs) containing (TPAPr)2 IrAcac and (TPSPr)2 IrAcac as dopants exhibit exceptional device performance with peak CE values of 38.24 and 36.06 cd A-1 , respectively. (TPAPr)2 IrAcac exhibited a superior efficiency than (TPSPr)2 IrAcac because of its high Φp , low RMSD value, and efficient energy transfer from the host to the guest. More importantly, the PLEDs based on (TPAPr)2 IrAcac and (TPSPr)2 IrAcac show stable phosphorescent emission with Commission Internationale de L'Eclairage (CIE) coordinates of (0.313, 0.497) and (0.299, 0.483), respectively. This work points out a viable method for creating phosphorescent iridium complexes based on pyrimidine for high-efficiency organic light-emitting diodes (OLEDs).

Modulating the G-Quadruplex and Duplex DNA Binding by Controlling the Charge of Fluorescent Molecules.

Two fluorescent and non-toxic spirobifluorene molecules bearing either positive (Spiro-NMe3) or negative (Spiro-SO3) charged moieties attached to the same aromatic structure have been investigated as binders for DNA. The novel Spiro-NMe3 containing four alkylammonium substituents interacts with G-quadruplex (G4) DNA structures and shows preference for G4s over duplex by means of FRET melting and fluorescence experiments. The interaction is governed by the charged substituents of the ligands as deduced from the lower binding of the sulfonate analogue (Spiro-SO3). On the contrary, Spiro-SO3 exhibits higher binding affinity to duplex DNA structure than to G4. Both molecules show a moderate quenching of the fluorescence upon DNA binding. The confocal microscopy evaluation shows the internalization of both molecules in HeLa cells and their lysosomal accumulation.

Cinnamyl Chalcone Based AIE Fluorescent Probes for Sensitive Detection of Hydrazine and its Application in Living Cells.

Widely utilized in the chemical industry and agriculture, hydrazine is easily absorbed by living things and can cause physical harm when in touch for an extended period of time. As a result, a novel cinnamaldehyde chalcone C5 was produced by Friedel Crafts process and aldol condensation reaction. Triphenylamine was used as the raw material for hydrazine determination in both reactions. Chalcone C5 exhibits significant AIE behavior in a mixed mixture of ethanol and water in addition to having great selectivity and a low detection limit (0.119 nm) for hydrazine. The solvent effect test revealed a linear relationship between the Stokes shift of C5 in the solvent and the rise in solvent orientation polarization. It is important to note that C5 is not harmful to MCF-7 cells, mouse kidney cells, or pig kidney cells. Furthermore, research on cell imaging has demonstrated that probe C5 may be utilized to image the fluorescence of hydrazine in active MCF-7 cells.

Acylhydrazone Functionalized Triphenylamine-Based Fluorescent Probe for Cu2+: Tunable Structures of Conjugated Bridge and Its Practical Application.

Novel fluorescent probes were constructed for the convenient and rapid analysis of Cu2+ ions, taking advantages of the the triphenylamine backbone as chromophore and acylhydrazone group as the Cu2+ recognition site. Especially, probe T2 could act as a dual-channel probe towards Cu2+ through both fluorescent and colorimetric method. Through the fluorescent method, the detection limit of probe T2 was calculated to be as low as 90 nmol/L and there was a good linear relationship between the intensity change and the concentration of Cu2+ ions. By virtue of the two-phase liquid-liquid extraction method, probe T2 could be successfully applied in practical extraction and separation of Cu2+. Furthermore, by applying a "turn-off-turn-on" circle, compound T2 could act as a sensitive probe towards S2- anions through the indirect approach and the detection limit of complex T2-Cu2+ for S2- anion was found to be 110 nmol/L.

Polymersomes with Red/Near-Infrared Emission and Reactive Oxygen Species Generation.

In photodynamic therapy (PDT), the uses of nanoparticles bearing photosensitizers (PSs) can overcome some of the drawbacks of using a PS alone (e.g., poor water solubility and low tumor selectivity). However, numerous nano-formulations are developed by physical encapsulation of PSs through Van der Waals interactions, which have not only a limited load efficiency but also some in vivo biodistribution problems caused by leakage or burst release. Herein, polymersomes made from an amphiphilic block copolymer, in which a PS with aggregation-induced emission (AIE-PS) is covalently attached to its hydrophobic poly(amino acid) block, are reported. These AIE-PS polymersomes dispersed in aqueous solution have a high AIE-PS load efficiency (up to 46% as a mass fraction), a hydrodynamic diameter of 86 nm that is suitable for in vivo applications, and an excellent colloidal stability for at least 1 month. They exhibit a red/near-infrared photoluminescence and ability to generate reactive oxygen species (ROS) under visible light. They are non-cytotoxic in the dark as tested on Hela cells up to concentration of 100 µm. Benefiting from colloidal stability, AIE property and ROS generation capability, such a family of polymersomes can be great candidates for image-guided PDT.

Rational Design of Bifunctional Microporous Organic Polymers Containing Anthracene and Triphenylamine Units for Energy Storage and Biological Applications.

In this study, we synthesized two conjugated microporous polymers (CMPs), An-Ph-TPA and An-Ph-Py CMPs, using the Suzuki cross-coupling reaction. These CMPs are organic polymers with p-conjugated skeletons and persistent micro-porosity and contain anthracene (An) moieties linked to triphenylamine (TPA) and pyrene (Py) units. We characterized the chemical structures, porosities, thermal stabilities, and morphologies of the newly synthesized An-CMPs using spectroscopic, microscopic, and N2 adsorption/desorption isotherm techniques. Our results from thermogravimetric analysis (TGA) showed that the An-Ph-TPA CMP displayed better thermal stability with Td10 = 467 °C and char yield of 57 wt% compared to the An-Ph-Py CMP with Td10 = 355 °C and char yield of 54 wt%. Furthermore, we evaluated the electrochemical performance of the An-linked CMPs and found that the An-Ph-TPA CMP had a higher capacitance of 116 F g-1 and better capacitance stability of 97% over 5000 cycles at 10 A g-1. In addition, we assessed the biocompatibility and cytotoxicity of An-linked CMPs using the MTT assay and a live/dead cell viability assay and observed that they were non-toxic and biocompatible with high cell viability values after 24 or 48 h of incubation. These findings suggest that the An-based CMPs synthesized in this study have potential applications in electrochemical testing and the biological field.

A Novel Fluorescence Sensor for Iodide Detection Based on the 1,3-Diaryl Pyrazole Unit with AIE and Mechanochromic Fluorescence Behavior.

A D-A type of luminophore, TPA-CDP, was designed and synthesized by using triphenylamine (TPA) as D (electron donor), 1,3-diaryl pyrazole with cyano groups (CDP) as A (electron acceptor) and employing a cyanovinyl segment as a recognition group. Firstly, TPA-CDP demonstrates effective fluorescence quenching as a sensor for I- by the nucleophilic addition reaction of the cyanovinyl segment with a high level of sensitivity, selectivity and a low determination limit of 4.43 µM. Interestingly, TPA-CDP exhibited an AIE phenomenon with the fw value reaching 50%. In addition, TPA-CDP displayed distinct mechanochromic fluorescence behavior with 70 nm red shift, which was observed over four repeated cycles. Furthermore, the mechanochromic fluorescence behavior of TPA-CDP, as observed in powder XRD experiments, was found to be associated with the morphological transition from a crystalline state to an amorphous state. These results confirm the significant potential of CDP as a powerful electron-deficient component in the creation of D-A-type mechanochromic fluorescence materials and biosensors for detecting I-.