Stability of Erythrocyte-Derived Nanovesicles Assessed by Light Scattering and Electron Microscopy.

Extracellular vesicles (EVs) are gaining increasing amounts of attention due to their potential use in diagnostics and therapy, but the poor reproducibility of the studies that have been conducted on these structures hinders their breakthrough into routine practice. We believe that a better understanding of EVs stability and methods to control their integrity are the key to resolving this issue. In this work, erythrocyte EVs (hbEVs) were isolated by centrifugation from suspensions of human erythrocytes that had been aged in vitro. The isolate was characterised by scanning (SEM) and cryo-transmission electron microscopy (cryo-TEM), flow cytometry (FCM), dynamic/static light scattering (LS), protein electrophoresis, and UV-V spectrometry. The hbEVs were exposed to various conditions (pH (4-10), osmolarity (50-1000 mOsm/L), temperature (15-60 °C), and surfactant Triton X-100 (10-500 µM)). Their stability was evaluated by LS by considering the hydrodynamic radius (Rh), intensity of scattered light (I), and the shape parameter (ρ). The morphology of the hbEVs that had been stored in phosphate-buffered saline with citrate (PBS-citrate) at 4 °C remained consistent for more than 6 months. A change in the media properties (50-1000 mOsm/L, pH 4-10) had no significant effect on the Rh (=100-130 nm). At pH values below 6 and above 8, at temperatures above 45 °C, and in the presence of Triton X-100, hbEVs degradation was indicated by a decrease in I of more than 20%. Due to the simple preparation, homogeneous morphology, and stability of hbEVs under a wide range of conditions, they are considered to be a suitable option for EV reference material.

Fabrication of Microalgae Oil Vesicles for Drug Delivery Applications.

In this study, it is demonstrated that natural microalgae oils, which contain fatty acid components including docosahexaenoic acid (DHA), could be directly applied to fabricate vesicular structures in aqueous phase through a forced formation process. The microalgae oil vesicles had initial average diameters of 170- 230 nm with negative charges apparently caused by dissociation of the fatty acid components. The vesicles possessed excellent stability with lifetimes for at least 450 days. The formation of the vesicular structures with hydrophilic cores/regions was confirmed by the transmission electron microscopy (TEM) image and successful encapsulation of a hydrophilic material. For encapsulation of a hydrophobic material, lutein, the vesicle size was increased probably due to the insertion of lutein into the hydrophobic vesicular bilayer structures. The analysis of Fourier transform infrared (FTIR) spectroscopy suggested that the vesicular bilayer fluidity was decreased by encapsulating lutein. However, the lutein-encapsulating microalgae oil vesicles still possessed high stability and the vesicular structures could maintain intact even at an environmental temperature up to 60℃. Applicability of the microalgae oil vesicles as drug delivery carriers was also demonstrated by successful encapsulation of curcumin. However, when the loaded curcumin was increased to a certain amount, physical stability of the microalgae oil vesicles was significantly reduced. This is probably because the vesicular structures with only limited spaces for accommodating hydrophobic materials were strongly affected by encapsulating a large amount of curcumin. It is interesting to note that by adding egg L-α-phosphatidylcholine, the curcumin encapsulation-induced instability of the microalgae oil vesicles could be alleviated. The results indicated that vesicular structures could be fabricated from microalgae oils and the microalgae oil vesicles were capable of encapsulating hydrophilic or hydrophobic materials for drug delivery applications. The findings lay a background for further dosage form development of nutritional supplements encapsulated by natural microalgae oils.

Stable nanovesicles formed by intrinsically planar bilayers.

HYPOTHESIS: Quatsome nanovesicles, formed through the self-assembly of cholesterol (CHOL) and cetyltrimethylammonium bromide (CTAB) in water, have shown long-term stability in terms of size and morphology, while at the same time exhibiting high CHOL-CTAB intermolecular binding energies. We hypothesize that CHOL/CTAB quatsomes are indeed thermodynamically stable nanovesicles, and investigate the mechanism underlying their formation. EXPERIMENTS: A systematic study was performed to determine whether CHOL/CTAB quatsomes satisfy the experimental requisites of thermodynamically stable vesicles. Coarse-grain molecular dynamics simulations were used to investigate the molecular organization in the vesicle membrane, and the characteristics of the simulated vesicle were corroborated with experimental data obtained by cryo-electron microscopy, small- and wide-angle X-ray scattering, and multi-angle static light scattering. FINDINGS: CHOL/CTAB quatsomes fulfill the requisites of thermodynamically stable nanovesicles, but they do not exhibit the classical membrane curvature induced by a composition asymmetry between the bilayer leaflets, like catanionic nanovesicles. Instead, CHOL/CTAB quatsomes are formed through the association of intrinsically planar bilayers in a faceted vesicle with defects, indicating that distortions in the organization and orientation of molecules can play a major role in the formation of thermodynamically stable nanovesicles.

Enhancing oral delivery of plant-derived vesicles for colitis.

Plant-derived vesicles (PDVs) are attractive for therapeutic applications, including as potential nanocarriers. However, a concern with oral delivery of PDVs is whether they would remain intact in the gastrointestinal tract. We found that 82% of cabbage PDVs were destroyed under conditions mimicking the upper digestive tract. To overcome this limitation, we developed a delivery method whereby lyophilized Eudragit S100-coated cabbage PDVs were packaged into a capsule (Cap-cPDVs). Lyophilization and suspension of PDVs did not have an appreciable impact on PDV structure, number, or therapeutic effect. Additionally, packaging the lyophilized Eudragit S100-coated PDVs into capsules allowed them to pass through the upper gastrointestinal tract for delivery into the colon better than did suspension of PDVs in phosphate-buffered saline. Cap-cPDVs showed robust therapeutic effect in a dextran sulfate sodium-induced colitis mouse model. These findings could have broad implications for the use of PDVs as orally delivered nanocarriers of natural therapeutic plant compounds or other therapeutics.

Effect of ß-sitosterol on the curcumin-loaded liposomes: Vesicle characteristics, physicochemical stability, in vitro release and bioavailability.

In this work, the effect of ß-sitosterol (Sito) on vesicle characteristics, physicochemical stability as well as the in vitro release and bioavailability of curcumin-loaded liposomes (Cur-LP) was studied. When 20-33 mol% of Sito was incorporated, encapsulation efficiency of curcumin was improved due to the high amount of liquid-ordered domains in membranes. At 50 mol% Sito a lower encapsulation efficiency was observed possibly due to membrane defects. The physical, thermal and photo stability of curcumin in liposomes were markedly improved with increasing the amount of Sito. First-order kinetics fitted best the curcumin release dynamics of Sito containing liposomes, clearly showing that sustained release improved with increasing amounts of Sito in liposomes. Simulated digestion studies suggested that Sito concentration of about 20-33 mol% improved the bioavailability of curcumin in liposomes. These study shows that Sito is an applicable and potential route in forming healthier cholesterol-free curcumin-loaded liposomes for functional supplements.

Enhanced Physical Stability of Mixed Ion Pair Amphiphile/Double-chained Cationic Surfactant Vesicles in the Presence of Cholesterol.

In this study, a pseudodouble-chained ion pair amphiphile (IPA), hexadecyltrimethylammoniumdodecylsulfate (HTMA-DS), and dialkyldimethylammonium bromide (DXDAB) with different chain lengths were used as the main materials to fabricate positively charged catanionic vesicles with various mole fractions of cholesterol. The effects of cholesterol and DXDAB alkyl chain length on physical stability of the catanionic vesicles were then investigated by size, zeta potential, and Fourier transform infrared analyses. With the presence of cholesterol in the mixed HTMA-DS/DXDAB vesicles or with increasing the DXDAB content in the presence of a proper amount of cholesterol, the physical stability of the catanionic vesicles could be enhanced. The spacing effect of cholesterol would reduce the counterion binding tendency at the charged vesicle surfaces, resulting in a more pronounced charge character of the catanionic vesicles. Furthermore, cholesterol-induced disordered structure contributed to the flexibility of the vesicular bilayers. Thus the physical stability of the vesicles was improved by adding cholesterol. With increasing the hydrocarbon chain length of DXDAB, cholesterol located toward the middle of the bilayers, enhancing the effects of cholesterol on charge and molecular packing characteristics of the vesicles. This led to a more pronounced stability enhancement effect on the vesicles with a longer alkyl chain length of DXDAB. The results suggested that the presence of cholesterol in the HTMA-DS/DXDAB catanionic vesicles could enhance vesicle stability through adjusting intra-vesicle and/or inter-vesicle interactions. In addition, the stability enhancement effect was more pronounced in the systems with a long DXDAB alkyl chain. The findings will be useful for developing new formulas of catanionic vesicles as drug delivery carriers.