RESUMO
Time-resolved X-ray photoelectron spectroscopy (TR-XPS) is used in a simulation study to monitor the excited state intramolecular proton transfer between oxygen and nitrogen atoms in 2-(iminomethyl)phenol. Real-time monitoring of the chemical bond breaking and forming processes is obtained through the time evolution of excited-state chemical shifts. By employing individual atomic probes of the proton donor and acceptor atoms, we predict distinct signals with opposite chemical shifts of the donor and acceptor groups during proton transfer. Details of the ultrafast bond breaking and forming dynamics are revealed by extending the classical electron spectroscopy chemical analysis to real time. Through a comparison with simulated time-resolved photoelectron spectroscopy at the valence level, the distinct advantage of TR-XPS is demonstrated thanks to its atom specificity.
RESUMO
The bottom-up synthesis of carbon-based nanomaterials directly on semiconductor surfaces allows for the decoupling of their electronic and magnetic properties from the substrates. However, the typically reduced reactivity of such nonmetallic surfaces adversely affects the course of these reactions. Here, we achieve a high polymerization yield of halogenated polyphenyl molecular building blocks on the semiconducting TiO2(110) surface via concomitant surface decoration with cobalt atoms, which catalyze the Ullmann coupling reaction. Specifically, cobalt atoms trigger the debromination of 4,4â³-dibromo-p-terphenyl molecules on TiO2(110) and mediate the formation of an intermediate organometallic phase already at room temperature (RT). As the debromination temperature is drastically reduced, homocoupling and polymerization readily proceed, preventing presursor desorption from the substrate and entailing a drastic increase of the poly-para-phenylene polymerization yield. The general efficacy of this mechanism is shown with an iodinated terphenyl derivative, which exhibits similar dehalogenation and reaction yield.
RESUMO
The beamline optics and endstations at branch B of the Versatile Soft X-ray (VerSoX) beamline B07 at Diamond Light Source are described. B07-B provides medium-flux X-rays in the range 45-2200â eV from a bending magnet source, giving access to local electronic structure for atoms of all elements from Li to Y. It has an endstation for high-throughput X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) measurements under ultrahigh-vacuum (UHV) conditions. B07-B has a second endstation dedicated to NEXAFS at pressures from UHV to ambient pressure (1â atm). The combination of these endstations permits studies of a wide range of interfaces and materials. The beamline and endstation designs are discussed in detail, as well as their performance and the commissioning process.
RESUMO
Aerosol science is of utmost importance for both climate and public health research, and in recent years X-ray techniques have proven effective tools for aerosol-particle characterization. To date, such methods have often involved the study of particles collected onto a substrate, but a high photon flux may cause radiation damage to such deposited particles and volatile components can potentially react with the surrounding environment after sampling. These and many other factors make studies on collected aerosol particles challenging. Therefore, a new aerosol sample-delivery system dedicated to X-ray photoelectron spectroscopy studies of aerosol particles and gas molecules in-flight has been developed at the MAX IV Laboratory. The aerosol particles are brought from atmospheric pressure to vacuum in a continuous flow, ensuring that the sample is constantly renewed, thus avoiding radiation damage, and allowing measurements on the true unsupported aerosol. At the same time, available gas molecules can be used for energy calibration and to study gas-particle partitioning. The design features of the aerosol sample-delivery system and important information on the operation procedures are described in detail here. Furthermore, to demonstrate the experimental range of the aerosol sample-delivery system, results from aerosol particles of different shape, size and composition are presented, including inorganic atmospheric aerosols, secondary organic aerosols and engineered nanoparticles.
RESUMO
Monolayer vanadium oxide films grown on Pt(111) can be reversibly switched between an oxygen-poor and an oxygen-rich composition, equivalent to V2O3 and V2O5, respectively. While the overall oxygen storage capacity of the film is quantified by X-ray photoelectron spectroscopy, the atomic binding sites of the extra O species are determined by low-temperature scanning tunneling microscopy and electron diffraction. In the O-poor phase, the oxide takes the form of a honeycomb lattice that gets partially covered with vanadyl (V=O) groups at higher O exposure. Upon transition to the O-rich phase, isolated V6O12 rings emerge in the film first, which then evolves towards a disordered O-V-O trilayer on the Pt(111) surface. Our works thus unravels the microscopic nature of reversible oxygen storage in a model system for heterogeneous catalysis.
RESUMO
The kinetics of coupling reactions on surfaces can be quantitatively studied in real time by X-ray Photoelectron Spectroscopy (XPS). From fitting experimental data, kinetic reaction parameters such as the rate constant's pre-exponential and activation energy can be deduced and compared to quantum chemical simulations. To elucidate the possibilities and limitations of this approach, we propose studies in which experimental data are first simulated and subsequently fitted. Knowing the exact kinetic parameters used in the simulation allows one to evaluate the accuracy of the fit result. Here, several experimental influences, such as the data point density and the addition of noise, are explored for a model reaction with first-order kinetics. The proposed procedure sheds light on the accuracy with which kinetic parameters can be derived and may also help in the design of future experiments.
RESUMO
The paper describes an investigation of phase decomposition of apatite lattice doped with rare earth ions (cerium, samarium, and holmium) at temperatures ranging from 25-1200 °C. The rare-earth ion-doped apatite minerals were synthesized using the sol-gel method. In situ high-temperature powder X-ray diffraction (XRD) was used to observe the phase changes and the lattice parameters were analyzed to ascertain the crystallographic transformations. The expansion coefficient of the compounds was determined, and it was found that the c-axis was the most expandable due to relatively weak chemical bonds along the c-crystallographic axis. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to examine the decomposition properties of the materials. Due to rare earth ion doping, the produced materials had slightly variable decomposition behaviour. The cerium and samarium ions were present in multiple oxidation states (Ce3+, Ce4+, Sm3+, Sm2+), whereas only Ho3+ ions were observed. Rare earth ion substitution affects tri-calcium phosphate proportion during decomposition by regulating concentrations of vacancies. X-ray photoelectron spectroscopy (XPS) analysis indicated that cerium and samarium ion-doped apatite yielded only 25 % tricalcium phosphate during decomposition. This finding advances our understanding of apatite structures, with implications for various high-temperature processes like calcination, sintering, hydrothermal processing, and plasma spraying.
RESUMO
In the framework of the design, synthesis and testing of a library of copper complexes and nanostructured assemblies potentially endowed with antitumor and antiviral activity and useful for several applications, from drugs and related delivery systems to the development of biocidal nanomaterials, we present the detailed spectroscopic investigation of the molecular and electronic structure of copper-based coordination compounds and of a new conjugated system obtained by grafting Cu(I) complexes to gold nanorods. More in detail, the electronic and molecular structures of two Cu complexes and one AuNRs/Cu-complex adduct were investigated by X-ray photoelectron spectroscopy (XPS), synchrotron-induced XPS (SR-XPS) and near edge X-ray absorption spectroscopy (NEXAFS) in solid state, and the local structure around copper ion was assessed by X-ray absorption spectroscopy (XAS) both in solid state and water solution for the AuNRs/Cu-complex nanoparticles. The proposed multi-technique approach allowed to properly define the coordination geometry around the copper ion, as well as to ascertain the molecular structures of the coordination compounds, their stability and modifications upon interaction with gold nanoparticles, by comparing solid state and liquid phase data.
RESUMO
In this perspective we discuss the progress made in the mechanistic studies of the surface chemistry associated with the atomic layer deposition (ALD) of metal films and the usefulness of that knowledge for the optimization of existing film growth processes and for the design of new ones. Our focus is on the deposition of late transition metals. We start by introducing some of the main surface-sensitive techniques and approaches used in this research. We comment on the general nature of the metallorganic complexes used as precursors for these depositions, and the uniqueness that solid surfaces and the absence of liquid solvents bring to the ALD chemistry and differentiate it from what is known from metalorganic chemistry in solution. We then delve into the adsorption and thermal chemistry of those precursors, highlighting the complex and stepwise nature of the decomposition of the organic ligands that usually ensued upon their thermal activation. We discuss the criteria relevant for the selection of co-reactants to be used on the second half of the ALD cycle, with emphasis on the redox chemistry often associated with the growth of metallic films starting from complexes with metal cations. Additional considerations include the nature of the substrate and the final structural and chemical properties of the growing films, which we indicate rarely retain the homogeneous 2D structure often aimed for. We end with some general conclusions and personal thoughts about the future of this field.
RESUMO
Today a lot of attention is paid to the formation of thermosensitive systems for biomedical and industrial applications. The development of new methods for synthesis of such systems is a dynamically developing direction in chemistry and materials science. In this regard, this paper presents results of the studies of a new synthesized supramolecular polymer system based on polyethylene glycol and tetrafluoroethylene telomers. The films formed from the polymer substance have the property of switching wettability depending on temperature after heating activation. It has been established that the wettability changes at 60 °C. The contact angle of activated hydrophobic polymer film reaches 143°. Additionally, the system exhibits its properties regardless of the pH of the environment. Based on data obtained by the methods of infrared and x-ray photoelectron spectroscopy, differential thermal analysis and thermal analysis in conjunction with wettability and morphology, a model of the behavior of molecules in a polymer system was built that ensures switching of the hydrophilic/hydrophobic surface state. The resulting polymer system, as well as films based on it, can be used in targeted drug delivery, implantation surgery, as sensors, etc.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Polietilenoglicóis , Molhabilidade , Polietilenoglicóis/química , Polímeros/química , Temperatura , Espectroscopia FotoeletrônicaRESUMO
The present study employs X-ray photoelectron spectroscopy (XPS) to analyze plastic samples subjected to degradation processes with the aim to gain insight on the relevant chemical processes and disclose fragmentation mechanisms. Two model plastics, namely polystyrene (PS) and polyethylene (PE), are selected and analyzed before and after artificial UV radiation-triggered weathering, under simulated environmental hydrodynamic conditions, in fresh and marine water for different time intervals. The object of the study is to identify and quantify chemical groups possibly evidencing the occurrence of hydrolysis and oxidation reactions, which are the basis of degradation processes in the environment, determining macroplastic fragmentation. Artificially weathered plastic samples are analyzed also by Raman and FT-IR spectroscopy. Changes in surface chemistry with weathering are revealed by XPS, involving the increase in chemical moieties (hydroxyl, carbonyl, and carboxyl functionalities) which can be correlated with the degradation processes responsible for macroplastic fragmentation. On the other hand, the absence of significant modifications upon plastics weathering evidenced by Raman and FT-IR spectroscopy confirms the importance of investigating plastics surface, which represents the very first part of the materials exposed to degradation agents, thus revealing the power of XPS studies for this purpose. The XPS data on experimentally weathered particles are compared with ones obtained on microplastics collected from real marine environment for investigating the occurring degradation processes.
Assuntos
Espectroscopia Fotoeletrônica , Plásticos , Polietileno , Espectroscopia Fotoeletrônica/métodos , Plásticos/química , Polietileno/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral Raman/métodos , Poliestirenos/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Água do Mar/química , Microplásticos/química , OxirreduçãoRESUMO
MXenes are two-dimensional (2D) materials with a great potential for sensor applications due to their high aspect ratio and fully functionalized surface that can be tuned for specific gas adsorption. Here, we demonstrate that the Nb2CTz-based sensor exhibits high performance towards alcohol vapors at temperatures up to 300-350 °C, with the best sensitivity towards ethanol. We attribute the observed remarkable chemiresistive effect of this material to the formation of quasi-2D Nb2O5 sheets as the result of the oxidation of Nb-based MXenes. These findings are supported by synchrotron X-ray photoelectron spectroscopy studies together with X-ray diffraction and electron microscopy observations. For analyte selectivity, we employ a multisensor approach where the gas recognition is achieved by linear discriminant analysis of the vector response of the on-chip sensor array. The reported protocol demonstrates that MXene layers are efficient precursors for the derivation of 2D oxide architectures, which are suitable for developing gas sensors and sensor arrays.
RESUMO
For the past two and a half decades, anomalous heating of trapped ions from nearby electrode surfaces has continued to demonstrate unexpected results. Caused by electric-field noise, this heating of the ions' motional modes remains an obstacle for scalable quantum computation with trapped ions. One of the anomalous features of this electric-field noise is the reported nonmonotonic behavior in the heating rate when a trap is incrementally cleaned by ion bombardment. Motivated by this result, the present work reports on a surface analysis of a sample ion-trap electrode treated similarly with incremental doses of Ar+ ion bombardment. Kelvin probe force microscopy and x-ray photoelectron spectroscopy were used to investigate how the work functions on the electrode surface vary depending on the residual contaminant coverage between each treatment. It is shown that the as-fabricated Au electrode is covered with a hydrocarbon film that is modified after the first treatment, resulting in work functions and core-level binding energies that resemble that of atomic-like carbon on Au. Changes in the spatial distribution of work functions with each treatment, combined with a suggested phenomenological coverage and surface-potential roughness dependence to the heating, appear to be related to the nonmonotonic behavior previously reported.
RESUMO
World-class borate deposits often form from As-rich waters, this study addresses the understudied association of arsenic (As) species with evaporite borates, focusing on the Puna region's borate deposits (Central Andes of Argentina). The research aims to characterize the association between borate minerals and high As concentrations in brines and thermal waters. To achieve this, five borate samples were collected from the Olaroz salt flat nucleus and thermal springs, alongside associated water samples. Comprehensive analytical techniques, including ICP-MS, ICP-OES, synchrotron-based micro-XRF, XRPD, Rietveld analysis, micro-FT-IR, and XPS, were employed to determine bulk and surface chemical compositions, mineral identification, and solid speciation of As and boron. The study reveals that under oxidizing conditions and in absence of organic matter, aqueous arsenic species interact with ulexite through a stepwise process involving charge neutralization, cationic bridge formation, and surface complex formation with polyborate and As(V) oxyanions. However, in environments associated with microbial mats or organic-rich sediments, the dissolved As(V) is reduced to As(III), which forms complexes with functional groups of organic matter. The coexistence of As(III) and As(V) in specific layers suggests potential remediation strategies targeting organic matter for the removal of the more toxic As(III) in similar geological settings.
RESUMO
This study investigates the influence of surface nitridation of Ta metal foil substrates on the growth of GaN nanorods using the laser molecular beam epitaxy (LMBE) technique and the field emission characteristics of the grown GaN nanorod ensemble. Surface morphology examinations underscore the pivotal role of Ta foil nitridation in shaping the dimensions and densities of GaN nanorods. Bare Ta foil fosters the formation of high-density, vertically self-aligned GaN nanorods at a growth temperature of 700 °C. Furthermore, the density of these nanorods is directly related to the duration of Ta foil nitridation, with increased duration leading to a reduced nanorod density. X-ray Photoelectron Spectroscopy (XPS) studies reveal that the transition of the Ta foil surface from tantalum oxide to tantalum nitride during nitridation emerges as a crucial factor influencing GaN nanorod growth. Photoluminescence (PL) spectroscopy at ambient temperature reveals a strong near-band-edge (NBE) emission peak with negligible defect-related peaks, displaying the high optical quality of the GaN nanorods. The highly dense vertically aligned GaN nanorod ensemble growth without Ta prenitridation exhibits the most favorable field emission performance, featuring a turn-on field of 2.1 V/µm, a field enhancement factor of 2480, and a stable long-term operation at the emission current density of 2.26 mA/cm2. This study advances the understanding of the role of the surface chemistry of metal foil in determining GaN nanorod growth and opens up exciting possibilities for tailoring advanced optoelectronic devices for specific application requirements.
RESUMO
In an effort to reconcile the various interpretations for the cation components of the 2p3/2observed in x-ray photoelectron spectroscopy (XPS) of several spinel oxide materials, the XPS spectra of both spinel alloy nanoparticles and crystalline thin films are compared. We observed that different components of the 2p3/2core level XPS spectra, of these inverse spinel thin films, are distinctly surface and bulk weighted, indicating surface-to-bulk core level shifts in the binding energies. Surface-to-bulk core level shifts in binding energies of Ni and Fe 2p3/2core levels of NiFe2O4thin film are observed in angle-resolved XPS. The ratio between surface-weighted components and bulk-weighted components of the Ni and Fe core levels shows appreciable dependency on photoemission angle, with respect to surface normal. XPS showed that the ferrite nanoparticles NixCo1-xFe2O4(x= 0.2, 0.5, 0.8, 1) resemble the surface of the NiFe2O4thin film. Surface-to-bulk core level shifts are also observed in CoFe2O4and NiCo2O4thin films but not as significantly as in NiFe2O4thin film. Estimates of surface stoichiometry of some spinel oxide nanoparticles and thin films suggested that the apportionment between cationic species present could be farther from expectations for thin films as compared to what is seen with nanoparticles.
RESUMO
High-efficiency and low-cost catalysts for oxygen evolution reaction (OER) are critical for electrochemical water splitting to generate hydrogen, which is a clean fuel for sustainable energy conversion and storage. Among the emerging OER catalysts, transition metal dichalcogenides have exhibited superior activity compared to commercial standards such as RuO2, but inferior stability due to uncontrolled restructuring with OER. In this study, we create bimetallic sulfide catalysts by adapting the atomic ratio of Ni and Co in CoxNi1-xSy electrocatalysts to investigate the intricate restructuring processes. Surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive X-ray absorption spectroscopy confirmed the favorable restructuring of transition metal sulfide material following OER processes. Our results indicate that a small amount of Ni substitution can reshape the Co local electronic structure, which regulates the restructuring process to optimize the balance between OER activity and stability. This work represents a significant advancement in the development of efficient and noble metal-free OER electrocatalysts through a doping-regulated restructuring approach.
RESUMO
Adsorption and desorption of ethylene on BaO-terminated (001) barium titanate are investigated by X-ray photoelectron spectroscopy. Carbon is found in an oxidized state, at a binding energy similar to that resulting from CO adsorption on BaTiO3(001). The amount of carbon adsorbed on the surface is also similar to the case of CO/BaTiO3(001). Upon heating the substrate up to the loss of its ferroelectric polarization, the C 1s signal from the oxidized spectral region vanishes. At the same time, there was no noticeable oxygen depletion of the surface after repeated C2H4 adsorption and desorption. The substrate remains stable after repeated oxidative adsorption and desorption of ethylene. Desorption occurs at different temperatures, depending on the adsorption temperature, which suggests different adsorption geometries: non-dissociated adsorption at high temperature with ethylene bond on two surface oxygen atoms, and locally dissociated adsorption at lower temperatures, in "formaldehyde-like" local configurations.
RESUMO
The green synthesis of copper oxide nanoparticles (CuO) mediated by crude ethanolic extract and the n-butanol fraction of Adiantum venustum represents a groundbreaking approach in nanotechnology, combining ecological sustainability with advanced functionality. This innovative method leverages the natural bioactive compounds present in A. venustum to produce CuO nanoparticles, which exhibit remarkable antioxidant, anti-inflammatory, antimicrobial, and anti-proliferative properties. The green synthesized nanoparticles were characterized using a variety of techniques, as XRD confirmed the crystalline nature of the CuO nanoparticles, with a crystallite size of 14.65 nm for CuO-C and 18.73 nm for CuO-B. The grain sizes of CuO-C (14.09 ± 0.17 nm) and CuO-B (67.88 ± 2.08 nm) were determined using transmission electron microscopy micrographs. Furthermore, the synthesized nanomaterial and the crude ethanolic extract, n-butanol fraction, were examined for their biological potentials namely antioxidant, anti-inflammatory, antimicrobial, and anti-proliferative activity against HeLa cancer cells. Among the synthesized nanomaterials, copper oxide nanoparticles synthesized by utilizing the n-butanol fraction have appeared as a potential biomedical agent. CuO-B has arisen as an antioxidant agent with IC50 values of 44.63 ± 0.49 µg/mL, 48.49 ± 0.17 µg/mL, and 35.39 ± 0.61 µg/mL for DPPH, FRAP, and reducing power assay, respectively. Furthermore, the significant antibacterial potential of CuO-B against gram-positive (S. aureus MIC 46.88 µg/mL) and gram-negative (K. pneumonia MIC 23.48 µg/mL) bacterial strains cannot be neglected either. Along with this, the IC50 value (138.07 µg/mL) of CuO-B against HeLa cells proved it to be a potential anticancerous agent. Hence, this novel approach emphasized that these synthesized nanoparticles have tremendous biological potential and can be applied to various fields of agriculture and biomedicine.
RESUMO
A key technology to ensure the safety and accuracy of autonomous driving for future transportation is the cleanliness of the sensor surfaces for accurate signal reading. This study focuses on hydrophobic coatings with self-cleaning performances and UV durability, their possible degradation mechanism of static water contact angle (sWCA), and the effect of the hydrophobic surface on camera image quality. The UV-durable hydrophobic coatings are applied by a spray process followed by a thermal curing. The UV-durable hydrophobic coatings are evaluated on a vision camera under lab-simulated weathering conditions such as rain, mud, fog, and bugs, on samples as-prepared and after various hours of Weather-Ometer® weathering. The results indicate that the sWCA degradation of the UV-durable hydrophobic coatings during accelerated weathering is corresponding to the loss of fluorine (F) atomic percentage in the coatings, and the vision camera imaging quality improves significantly with the UV-durable hydrophobic coatings in comparison to an uncoated surface. The self-cleaning performances of the UV-durable hydrophobic coatings, as measured by two metrics using signal-to-noise ratio and modulation transfer function 50 loss (MTF50loss), linearly correlate with sWCA of the coatings. The UV-durable hydrophobic coatings on the sensor surface will significantly benefit autonomous driving specifically for accurate signal reading under inclement weather.