Ferula latisecta gels for synthesis of zinc/silver binary nanoparticles: antibacterial effects against gram-negative and gram-positive bacteria and physicochemical characteristics.

This study explores the potential antibacterial applications of zinc oxide nanoparticles (ZnO NPs) enhanced with silver (Ag) using plant gel (ZnO-AgO NPs). The problem addressed is the increasing prevalence of pathogenic bacteria and the need for new, effective antimicrobial agents. ZnO NPs possess distinctive physicochemical properties that enable them to selectively target bacterial cells. Their small size and high surface area-to-volume ratio allow efficient cellular uptake and interaction with bacterial cells. In this study, the average size of the synthesized ZnO-Ag nanoparticles was 77.1 nm, with a significant standard deviation of 33.7 nm, indicating a wide size distribution. The nanoparticles demonstrated remarkable antibacterial efficacy against gram-negative and gram-positive bacteria, with inhibition zones of 14.33 mm for E. coli and 15.66 mm for B. subtilis at a concentration of 300 µg/ml. Minimum inhibitory concentrations (MIC) were determined to be 100 µg/ml for E. coli and 75 µg/ml for S. saprophyticus. Additionally, ZnO-Ag NPs exhibited excellent biocompatibility, making them appropriate for various pharmacological uses. This study utilizes Ferula latisecta gels, offering a sustainable and eco-friendly approach to nanoparticle synthesis. Incorporating of Ag into ZnO NPs significantly enhances their antimicrobial properties, with the combined results showing great inhibition effects on pathogenic microbes. The findings suggest that ZnO-Ag NPs could be a promising candidate for addressing the challenges posed by drug-resistant bacterial infections and enhancing antimicrobial treatments.

Deciphering the Metal-Support Interaction of Au/ZnO Catalyst Induced by H2 and O2 Pretreatment.

Metal-support interaction (MSI) provides great possibilities to tune the activity, selectivity, and stability of heterogeneous catalysts. Herein, the Au/ZnO catalyst is prepared by commercial ZnO and chloroauric acid, and the structure evolution of the catalyst pretreated by H2 and O2 gas at varied temperature is investigated to provide mechanistic insights of MSI. It is found that the H2 treatment at 300 °C and above can induce the formation of both the ZnOx overlayer and bulk Au-Zn alloy. In contrast, the O2 treatment can form the ZnOx overlayer at 500 °C and above without the formation of Au-Zn alloy. It is also revealed that the ZnOx overlayer is dynamically stable (permeable), which can provide access for reactant molecules during the reaction process. And, the Au-Zn alloy can recover to Au and ZnO under the CO oxidation reaction condition, which can be deemed as a re-activation process that endows H2 -treated samples with the superior activity and stability.

Vapor-Tailored Nanojunctions in Ultraporous ZnO Nanoparticle Networks for Superior UV Photodetection.

High quality nanojunctions are known to effectively improve the conductivity and structural robustness of ultraporous nanoparticle networks, surpassing the performance of natural van der Waals interfaces. Nevertheless, the traditional approach of forming these junctions by thermal annealing is incompatible with thermolabile polymers and slender metal electrodes found in modern wearable technologies. Herein, we present a low temperature, solvent vapor-based method to rapidly elicit high-quality metal-oxide nanojunctions in a fast, effortless, inexpensive, and easily scalable process; capable of generating necked interparticle interfaces in a matter of minutes. When applied to ultraporous-based ZnO Ultraviolet (UV) photodetectors, the vapor-tailoring process produces an incredible 128,000-fold improvement in responsivity (6.6 A.W-1) over untreated structures (51.2 µA.W-1), and a 5300-fold improvement in responsivity over thermally annealed structures; all while maintaining exceptionally low dark currents of 140 pA at a low bias voltage of 1 V. Most importantly, the exceptional performance enabled by room temperature synthesis suggests high potential adaptability of this process toward wearable UV sensors, shedding lights on the strategy of modifying weakly bonded porous nanostructures for improved physical properties.

On the Fate of Lithium Ions in Sol-Gel Derived Zinc Oxide Nanocrystals.

Among diverse chemical synthetic approaches to zinc oxide nanocrystals (ZnO NCs), ubiquitous inorganic sol-gel methodology proved crucial for advancements in ZnO-based nanoscience. Strikingly, unlike the exquisite level of control over morphology and size dispersity achieved in ZnO NC syntheses, the purity of the crystalline phase, as well as the understanding of the surface structure and the character of the inorganic-organic interface, have been limited to vague descriptors until very recently. Herein, ZnO NCs applying the standard sol-gel synthetic protocol are synthesized with zinc acetate and lithium hydroxide and tracked the integration of lithium (Li) cations into the interior and exterior of nanoparticles by combining various techniques, including advanced solid-state NMR methods. In contrast to common views, it is demonstrated that Li+ ions remain kinetically trapped in the inorganic core, enter into a shallow subsurface layer, and generate "swelling" of the surface and interface regions. Thus, this work enabled both the determination of the NCs' structural imperfections and an in-depth understanding of the unappreciated role of the Li+ ions in impacting the doping and the passivation of sol-gel-derived ZnO nanomaterials.

Fluorescent Conversion Agent Embedded in Zinc Oxide as an Electron-Transporting Layer for High-Performance Non-Fullerene Organic Solar Cells with Improved Photostability.

Zinc oxide (ZnO) is widely used as an electron transporting layer (ETL) for organic solar cells (OSCs). Here, a low-cost commercial water/alcohol-soluble fluorescent conversion agent, sodium 2,2'-([1,1'-biphenyl]-4,4'-diyldivinylene)-bis(benzenesulfonate) (CBS), is incorporated into ZnO to develop a novel organic-inorganic hybrid ETL for high-performance OSCs. The photoinduced charge transfer from CBS to ZnO significantly improves the charge transport properties of ZnO, resulting in faster electron extraction and reduced charge recombination in OSC devices with ZnO:CBS ETLs. ZnO:CBS-based devices exhibit higher power conversion efficiencies (PCEs) than their pure ZnO-based counterparts, especially in devices with a thicker ETL, which is more suitable for roll-to-roll and large-area module processing. Furthermore, the strong ultraviolet-light absorption capability of CBS inhibits the photodegradation of the active layer, improving the photostability of ZnO:CBS based OSC devices. Therefore, this work provides a simple and effective strategy for realizing high-performance OSCs with high PCE and good photostability, which can further facilitate the commercialization of OSCs.

A Zinc Oxide Nanowire-Modified Mineralized Collagen Scaffold Promotes Infectious Bone Regeneration.

Bone infection poses a major clinical challenge that can hinder patient recovery and exacerbate postoperative complications. This study has developed a bioactive composite scaffold through the co-assembly and intrafibrillar mineralization of collagen fibrils and zinc oxide (ZnO) nanowires (IMC/ZnO). The IMC/ZnO exhibits bone-like hierarchical structures and enhances capabilities for osteogenesis, antibacterial activity, and bacteria-infected bone healing. During co-cultivation with human bone marrow mesenchymal stem cells (BMMSCs), the IMC/ZnO improves BMMSC adhesion, proliferation, and osteogenic differentiation even under inflammatory conditions. Moreover, it suppresses the activity of Gram-negative Porphyromonas gingivalis and Gram-positive Streptococcus mutans by releasing zinc ions within the acidic infectious microenvironment. In vivo, the IMC/ZnO enables near-complete healing of infected bone defects within the intricate oral bacterial milieu, which is attributed to IMC/ZnO orchestrating M2 macrophage polarization, and fostering an osteogenic and anti-inflammatory microenvironment. Overall, these findings demonstrate the promise of the bioactive scaffold IMC/ZnO for treating bacteria-infected bone defects.

Oxygen Vacancy and Bandgap Simultaneous Modulation to Achieve High Lithiophilicity and Mechanical Strength of Lithium Metal Anodes.

Metal oxides with conversion and alloying mechanisms are more competitive in suppressing lithium dendrites. However, it is difficult to simultaneously regulate the conversion and alloying reactions. Herein, conversion and alloying reactions are regulated by modulation of the zinc oxide bandgap and oxygen vacancies. State-of-the-art advanced characterization techniques from a microcosmic to a macrocosmic viewpoint, including neutron diffraction, synchrotron X-ray absorption spectroscopy, synchrotron X-ray microtomography, nanoindentation, and ultrasonic C-scan demonstrated the electrochemical gain benefit from plentiful oxygen vacancies and low bandgaps due to doping strategies. In addition, high mechanical strength 3D morphology and abundant mesopores assist in the uniform distribution of lithium ions. Consequently, the best-performed ZnO-2 offers impressive electrochemical properties, including symmetric Li cells with 2000 h and full cells with 81% capacity retention after 600 cycles. In addition to providing a promising strategy for improving the lithiophilicity and mechanical strength of metal oxide anodes, this work also sheds light on lithium metal batteries for practical applications.

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles.

This research addresses challenges with silver nanowires (Ag NWs) as transparent conductive electrodes (TCEs) and heaters in commercial devices. Here, zinc oxide nanoparticles (ZnO NPs) are first reported as a protective layer for Ag NWs. Multi-physics simulations confirm enhanced thermal stability due to improved heat dissipation, temperature distribution, and thermal conductivity from ZnO. When Ag NWs are surrounded by air, heat transfers mainly through convection and radiation because of air's low conduction coefficient. Encasing Ag NWs in ZnO enhances heat transfer to the ZnO surface, accelerating cooling and dissipating more heat into the atmosphere via convection. The results show composite's efficiency in the Joule effect, maintaining a consistent temperature of 78 °C for 700 s after 500 bending cycles, a significant improvement over Ag NWs operating for only 5 s at 80 °C. Additionally, the composite film exhibited exceptional performance, including a sheet resistance of 9.8 Ω sq-1 and an optical transmittance of 96.96 %, outperforming Ag NWs, which have a sheet resistance of 12 Ω sq-1 and a transmittance of 94.11%. The combination of enhanced electrical, thermal, and mechanical stability, along with impressive optical properties, makes Ag NWs/ZnO NPs a promising candidate for transparent conductive electrode materials in various applications.

Low-dose zinc oxide nanoparticles trigger the growth and biofilm formation of Pseudomonas aeruginosa: a hormetic response.

INTRODUCTION: Hormesis describes an inverse dose-response relationship, whereby a high dose of a toxic compound is inhibitory, and a low dose is stimulatory. This study explores the hormetic response of low concentrations of zinc oxide nanoparticles (ZnO NPs) toward Pseudomonas aeruginosa. METHOD: Samples of P. aeruginosa, i.e. the reference strain, ATCC 27,853, together with six strains recovered from patients with cystic fibrosis, were exposed to ten decreasing ZnO NPs doses (0.78-400 µg/mL). The ZnO NPs were manufactured from Peganum harmala using a chemical green synthesis approach, and their properties were verified utilizing X-ray diffraction and scanning electron microscopy. A microtiter plate technique was employed to investigate the impact of ZnO NPs on the growth, biofilm formation and metabolic activity of P. aeruginosa. Real-time polymerase chain reactions were performed to determine the effect of ZnO NPs on the expression of seven biofilm-encoding genes. RESULT: The ZnO NPs demonstrated concentration-dependent bactericidal and antibiofilm efficiency at concentrations of 100-400 µg/mL. However, growth was significantly stimulated at ZnO NPs concentration of 25 µg/mL (ATCC 27853, Pa 3 and Pa 4) and at 12.5 µg/mL and 6.25 µg/mL (ATCC 27853, Pa 2, Pa 4 and Pa 5). No significant positive growth was detected at dilutions < 6.25 µg/mL. similarly, biofilm formation was stimulated at concentration of 12.5 µg/mL (ATCC 27853 and Pa 1) and at 6.25 µg/mL (Pa 4). At concentration of 12.5 µg/mL, ZnO NPs upregulated the expression of LasB ( ATCC 27853, Pa 1 and Pa 4) and LasR and LasI (ATCC 27853 and Pa 1) as well as RhII expression (ATCC 27853, Pa 2 and Pa 4). CONCLUSION: When exposed to low ZnO NPs concentrations, P. aeruginosa behaves in a hormetic manner, undergoing positive growth and biofilm formation. These results highlight the importance of understanding the response of P. aeruginosa following exposure to low ZnO NPs concentrations.

Improved Conductivity and in Situ Formed Heterojunction via Zinc Doping in CuBi2O4 for Photoelectrochemical Water Splitting.

As a photocathode with a band gap of about 1.8 eV, copper bismuthate (CuBi2O4) is a promising material for photoelectrochemical (PEC) water splitting. However, weak charge transfer capability and severe carrier recombination suppress the PEC performance of CuBi2O4. In this paper, the conductivity and carriers transport of CuBi2O4 are improved via introducing Zn2+ into the synthesis precursor of CuBi2O4, driving a beneficial 110 mV positive shift of onset potential in photocurrent. Detailed investigations demonstrate that the introduction of an appropriate amount of zinc leads to in situ segregation of ZnO which serves as an electron transport channel on the surface of CuBi2O4, forming heterojunctions. The synergistic effect of heterojunctions and doping simultaneously promotes the charge transfer and the carrier concentration. OCP experiment proves that ZnO/Zn-CuBi2O4 possesses better charge separation; the Mott-Schottky curve shows that the doping of Zn significantly enhances the carrier concentration; carrier lifetime calculated from time-resolved photoluminescence confirms faster extraction of carriers.

Application of nano-ZnO in the food preservation industry: antibacterial mechanisms, influencing factors, intelligent packaging, preservation film and safety.

In recent years, how to improve the functional performance of food packaging materials has received increasing attention. One common inorganic material, nanometer zinc oxide (ZnO-NPs), has garnered significant attention due to its excellent antibacterial properties and sensitivity. Consequently, ZnO-NP-based functional packaging materials are rapidly developing in the food industry. However, there is currently a lack of comprehensive and systematic reviews on the use of ZnO-NPs as functional fillers in food packaging. In this review, we introduced the characteristics and antibacterial mechanism of ZnO-NPs, and paid attention to the factors affecting the antibacterial activity of ZnO-NPs. Furthermore, we systematically analyzed the application of intelligent packaging and antibacterial packaging containing ZnO-NPs in the food industry. At the same time, this paper also thoroughly investigated the impact of ZnO-NPs on various properties including thickness, moisture resistance, water vapor barrier, mechanical properties, optical properties, thermal properties and microstructure of food packaging materials. Finally, we discussed the migration and safety of ZnO-NPs in packaging materials. ZnO-NPs are safe and have negligible migration rates, simultaneously their sensitivity and antibacterial properties can be used to detect the quality changes of food during storage and extend its shelf life.

Density-controlled electrochemical synthesis of ZnO nanowire arrays using nanotextured cathode.

Zinc oxide (ZnO) nanowires fabricated via wet chemical synthesis on flexible polymer substrates are inherently unstable against mechanical bending stress because of their high density and weak adhesion to the substrate. We introduce a novel method for controlling the density of such ZnO nanowire arrays using a three-dimensional corrugated metal substrate. These metal substrates, featuring extruded and recessed patterns fabricated via nanoimprint lithography, were employed as cathodes during the electrochemical deposition of ZnO nanowire arrays. The ZnO nanowire arrays synthesized on the patterned metal thin film exhibited smaller diameters and lower densities compared to those on non-patterned metal films. This reduction in density can be attributed to aligned nucleation and limited growth on the patterned metal surface. Crucially, ZnO nanowires synthesized on patterned metal substrates displayed remarkable mechanical robustness against external forces, a direct consequence of their reduced density. In contrast, nanowires synthesized on non-patterned metal substrates were broken under mechanical bending. Detailed morphological analyses performed after mechanical bending tests confirm that ZnO nanowires synthesized on nanoimprinted metal electrodes exhibited enhanced mechanical characteristics compared to those on non-patterned metal electrodes. These findings clearly demonstrate the promise of utilizing density-controlled ZnO nanowires in piezoelectric devices.

Photocatalytic activity enhancement of nanostructured metal-oxides photocatalyst: a review.

Nanostructured metal oxide semiconductors have emerged as promising nanoscale photocatalysts due to their excellent photosensitivity, chemical stability, non-toxicity, and biocompatibility. Enhancing the photocatalytic activity of metal oxide is critical in improving their efficiency in radical ion production upon optical exposure for various applications. Therefore, this review paper provides an in-depth analysis of the photocatalytic activity of nanostructured metal oxides, including the photocatalytic mechanism, factors affecting the photocatalytic efficiency, and approaches taken to boost the photocatalytic performance through structure or material modifications. This paper also highlights an overview of the recent applications and discusses the recent advancement of ZnO-based nanocomposite as a promising photocatalytic material for environmental remediation, energy conversion, and biomedical applications.

Self-powered, wide spectral UV response out-of-plane photodetector based on ZnO/porous silicon heterostructure.

The photoresponse of the ZnO/porous silicon (p-Si) heterojunction is studied in an out-of-plane contact configuration. p-Si substrate is fabricated by anodic etching followed by the electrochemical deposition of ZnO NR film, forming ZnO/p-Si heterojunction. XRD study is done to understand the effect of the substrate on ZnO film growth in terms of strain and crystal size. UV-vis absorbance spectrum shows a broad absorption for wavelengths from 230 to 380 nm. The PL emission shows two narrow and prominent electron transition peaks at 263 and 383 nm and a peak of ∼550 nm corresponding to defects. The 263 nm wavelength responsivity of the photodetector from UV-vis and PL data suggests the presence of a defective SiOxas an intermediate layer between ZnO and p-Si. The photodetector is measured for its spectral selectivity and responsivity for both 266 and 370 nm. Under self-powered conditions, the device shows a low dark current of a few nA and enhancement of ∼100 nA and ∼1.37µA for both wavelengths. A responsivity of 527 mA W-1and 10.5µA W-1and detectivity of 2.5 × 1010and 2.9 × 107Jones at 1 V bias under 266 and 370 nm UV illumination are observed. The fast rise/decay time of 67/65 ms and 29/18 ms is observed for the self-powered condition of the device under both wavelengths respectively. The photoresponse of the modified ZnO/SiOx/p-Si heterojunction for both wavelengths is analyzed for the electron transfer mechanism using the heterojunction band bending model. The short circuit current and open circuit voltage of the photodetector is estimated to be 293 nA, 56.33 mV, and 13.63µA, 124.8 mV for 266 and 370 nm, respectively. It is concluded that the 266 nm responsivity comes from the defects in SiOxintermediate layer, and the photocurrent generated in the device is due to tunneling across the junction.

Metal nanoparticles to improve the heat resilience in wheat (Triticum aestivumL.).

This study evaluated the efficacy of phytogenic silver and zinc nanoparticles in improving heat resilience in various wheat varieties. The silver and zinc nanoparticles were synthesized using plant leaf extract and characterized using various techniques. Four wheat varieties (DBW187, Black Wheat, DBW 50, and PBW 621) were subjected to field trials. The random block design was used, and nanoparticles in different concentrations were applied at various growth stages and morphologically, and yield parameters were recorded. UV-vis spectroscopy spectral analysis showed peaks for Ag nanoparticles at 420 nm wavelength and Zn nanoparticles at 240 and 350 nm wavelength, depicting the preliminary confirmation of nanoparticle synthesis. Electron microscopic analysis (TEM and SEM) provided morphological insights and confirmed synthesis of fine-sized particle mostly in a range between 10 and 60 nm. Energy dispersive x-ray analysis confirmed the elemental composition of the synthesized nanoparticles, with Ag and Zn elements detected in their respective samples. It also confirmed the oxide nature of synthesized ZnNPs. Dynamic light scattering analysis provided size distribution profiles, indicating average sizes of approximately 61.8 nm for Ag nanoparticles and 46.5 nm for Zn nanoparticles. The concentrations of Ag and Zn nanoparticles in the samples were found to be 196.3 ppm and 115.14 ppm, respectively, through atomic absorption spectroscopic analysis. Fourier transform infrared spectroscopy analysis revealed characteristic functional groups present in the nanoparticles. The results of field experiments established that Ag nanoparticles at 75 ppm concentration exhibited the most significant enhancements in plant growth. Conversely, Zn nanoparticles at a 100 ppm concentration demonstrated the most substantial improvements in the growth and yield of heat-stressed wheat varieties. The study concludes that optimized concentrations of silver and zinc nanoparticles can effectively improve heat stress resilience in wheat. These findings are promising to enhance abiotic stress resilience in crops.

Amelioratedin vitroanti-cancer efficacy of methotrexate loaded zinc oxide nanoparticles in breast cancer cell lines MCF-7 & MDA-MB-231 and its acute toxicity study.

Traditional therapies often struggle with specificity and resistance in case of cancer treatments. It is therefore important to investigate new approaches for cancer treatment based on nanotechnology. Zinc oxide nanoparticles (ZnONPs) are known to exhibit anti-cancer properties by inducing oxidative stress, apoptosis, and cell cycle arrest. Methotrexate (MTX) a known anti-folate shows specificity to folate receptors and interrupts healthy functioning of cells. This study proposes the use of previously characterized biocompatible Methotrexate loaded Zinc oxide nanoparticles (MTX-ZnONPs) as a dual action therapeutic strategy against breast cancer cell lines, MCF-7 (MTX-sensitive) and MDA-MB-231 (MTX-resistant). To elucidate the cytotoxicity mechanism of MTX-ZnONPs an in depthIn vitrostudy was carried out.In vitroassays, including cell cycle analysis, apoptosis assay, and western blot analysis to study the protein expression were performed. Results of these assays, further supported the anti-cancer activity of MTX-ZnONPs showing apoptotic and necrotic activity in MCF-7 and MDA-MB-231 cell line respectively.In vivoacute oral toxicity study to identify the LD50in animals revealed no signs of toxicity and mortality up to 550 mg kg-1body weight of animal, significantly higher LD50values than anticipated therapeutic levels and safety of the synthesized nanosystem. The study concludes that MTX-ZnONPs exhibit anti-cancer potential against breast cancer cells offering a promising strategy for overcoming resistance.

Sonochemical synthesis of bioinspired graphene oxide-zinc oxide hydrogel for antibacterial painting on biodegradable polylactide film.

Graphene oxide nanosheet (GO) is a multifunctional platform for binding with nanoparticles and stacking with two dimensional substrates. In this study, GO nanosheets were sonochemically decorated with zinc oxide nanoparticles (ZnO) and self-assembled into a hydrogel of GO-ZnO nanocomposite. The GO-ZnO hydrogel structure is a bioinspired approach for preserving graphene-based nanosheets from van der Waals stacking. X-ray diffraction analysis (XRD) showed that the sonochemical synthesis led to the formation of ZnO crystals on GO platforms. High water content (97.2%) of GO-ZnO hydrogel provided good property of ultrasonic dispersibility in water. Ultraviolet-visible spectroscopic analysis (UV-vis) revealed that optical band gap energy of ZnO nanoparticles (∼3.2 eV) GO-ZnO nanosheets (∼2.83 eV). Agar well diffusion tests presented effective antibacterial activities of GO-ZnO hydrogel against gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). Especially, GO-ZnO hydrogel was directly used for brush painting on biodegradable polylactide (PLA) thin films. Graphene-based nanosheets with large surface area are key to van der Waals stacking and adhesion of GO-ZnO coating to the PLA substrate. The GO-ZnO/PLA films were characterized using photography, light transmittance spectroscopy, coating stability, scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopic mapping (EDS), antibacterial test and mechanical tensile measurement. Specifically, GO-ZnO coating on PLA substrate exhibited stability in aqueous food simulants for packaging application. GO-ZnO coating inhibited the infectious growth ofE. colibiofilm. GO-ZnO/PLA films had strong tensile strength and elastic modulus. As a result, the investigation of antibacterial GO-ZnO hydrogel and GO-ZnO coating on PLA film is fundamental for sustainable development of packaging and biomedical applications.

Wetting behavior of stainless-steel surface with zinc oxide nanorod coatings: modulations in nanorod alignment through atomic layer deposition.

This study investigated the hydrophobic-hydrophilic characteristics of zinc oxide (ZnO) nanorod coatings for potential biomedical applications. We examined the effects of different alignments of ZnO nanorods on the wetting and mechanical characteristics of the coatings. ZnO seed layers were prepared on stainless-steel plates using atomic layer deposition (ALD) at five different temperatures ranging from 50 to 250 °C. The ZnO nanorod coatings were then deposited on these seed layers through chemical bath deposition. The polycrystalline structure of the seed layers and the morphology of the nanorods were analyzed using grazing incidence angle x-ray diffraction, transmission electron microscopy, and scanning electron microscopy. Mechanical and wetting properties of the nanorod coatings were examined using nanoindentation and water-droplet tests. The seed layers produced at 50 and 250 °C showed stronger (0 0 2) peaks than the other layers. ZnO nanorods on these seed layers exhibited greater vertical orientation and lower water contact angles indicating a more hydrophilic surface. Additionally, vertically oriented nanorod coatings demonstrated greater elastic modulus and hardness than those of oblique nanorods. Our findings indicate that ALD technology can be used to control the spatial arrangement of ZnO nanorods and optimize the hydrophobic-hydrophilic and mechanical properties of coating surfaces.

Atomistic modeling of electromechanical properties of piezoelectric zinc oxide nanowires.

Currently, numerous articles are devoted to examining the influence of geometry and charge distribution on the mechanical properties and structural stability of piezoelectric nanowires (NWs). The varied modeling techniques adopted in earlier molecular dynamics (MD) works dictated the outcome of the different efforts. In this article, comprehensive MD studies are conducted to determine the influence of varied interatomic potentials (partially charged rigid ion model, [PCRIM] ReaxFF, charged optimized many-body [COMB], and Buckingham), geometrical parameters (cross-section geometry, wire diameter, and length), and charge distribution (uniform full charges versus partially charged surface atoms) on the resulting mechanical properties and structural stability of zinc oxide (ZnO) NWs. Our optimized parameters for the Buckingham interatomic potential are in good agreement with the existing experimental results. Furthermore, we found that the incorrect selection of interatomic potentials could lead to excessive overestimate (61%) of the elastic modulus of the NW. While NW length was found to dictate the strain distribution along the wire, impacting its predicted properties, the cross-section shape did not play a major role. Assigning uniform charges for both the core and surface atoms of ZnO NWs leads to a drastic decrease in fracture properties.

Reducing Gut Dissolution of Zinc Oxide Nanoparticles by Secondary Microplastics with Consequent Impacts on Barnacle Larvae.

The environmental impact of sunscreen is a growing concern, yet the combined effects of its components on marine animals are poorly understood. In this study, we investigated the combined effects of sunscreen-extracted zinc oxide nanoparticles (nZnO) and microplastics (MPs) on the development of barnacle larvae, focusing on the different roles played by primary microplastics (PMPs) and secondary microplastics (SMPs) generated through the phototransformation of PMPs. Our findings revealed that a lower concentration of nZnO (50 µg/L) enhanced molting and eye development in barnacle larvae, while a higher concentration (500 µg/L) inhibited larval growth. Co-exposure to PMPs had no significant effect on larval development, whereas SMPs mitigated the impact of nZnO by restricting the in vivo transformation to ionic Zn. Accumulated SMPs reduced gut dissolution of nZnO by up to 40%, lowering gut acidity by 85% and buffering the in vivo dissolution of nZnO. We further identified a rough-surfaced Si-5 fragment in SMPs that damaged larval guts, resulting in decreased acidity. Another Si-32 resisted phototransformation and had no discernible effects. Our study presented compelling evidence of the impacts of SMPs on the bioeffect of nZnO, highlighting the complex interactions between sunscreen components and their combined effects on marine organisms.