Metallacyclobuta-(2,3)-diene: A Bidentate Ligand for Stream-line Synthesis of First Row Transition Metal Catalysts for Cyclic Polymerization of Phenylacetylene.

Described here is a direct entry to two examples of 3d transition metal catalysts that are active for the cyclic polymerization of phenylacetylene, namely, [(BDI)M{κ2 -C,C-(Me3 SiC3 SiMe3 )}] (2-M) (BDI=[ArNC(CH3 )]2 CH- , Ar=2,6-i Pr2 C6 H3 ; M=Ti, V). Catalysts are prepared in one step by the treatment of [(BDI)MCl2 ] (1-M, M=Ti, V) with 1,3-dilithioallene [Li2 (Me3 SiC3 SiMe3 )]. Complexes 2-M have been spectroscopically and structurally characterized and the polymers that are catalytically formed from phenylacetylene were verified to have a cyclic topology based on a combination of size-exclusion chromatography (SEC) and intrinsic viscosity studies. Two-electron oxidation of 2-V with nitrous oxide (N2 O) cleanly yields a [VV ] alkylidene-alkynyl oxo complex [(BDI)V(=O){κ1 -C-(=C(SiMe3 )CC(SiMe3 ))}] (3), which lends support for how this scaffold in 2-M might be operating in the polymerization of the terminal alkyne. This work demonstrates how alkylidynes can be circumvented using 1,3-dianionic allene as a segue into M-C multiple bonds.

Phosphorus-Atom Transfer from Phosphaethynolate to an Alkylidyne.

A low-spin and mononuclear vanadium complex, (Me nacnac)V(CO)(η2 -P≡Ct Bu) (2) (Me nacnac- =[ArNC(CH3 )]2 CH, Ar=2,6-i Pr2 C6 H3 ), was prepared upon treatment of the vanadium neopentylidyne complex (Me nacnac)V≡Ct Bu(OTf) (1) with Na(OCP)(diox)2.5 (diox=1,4-dioxane), while the isoelectronic ate-complex [Na(15-crown-5)]{([ArNC(CH2 )]CH[C(CH3 )NAr])V(CO)(η2 -P≡Ct Bu)} (4), was obtained via the reaction of Na(OCP)(diox)2.5 and ([ArNC(CH2 )]CH[C(CH3 )NAr])V≡Ct Bu(OEt2 ) (3) in the presence of crown-ether. Computational studies suggest that the P-atom transfer proceeds by [2+2]-cycloaddition of the P≡C bond across the V≡Ct Bu moiety, followed by a reductive decarbonylation to form the V-C≡O linkage. The nature of the electronic ground state in diamagnetic complexes, 2 and 4, was further investigated both theoretically and experimentally, using a combination of density functional theory (DFT) calculations, UV/Vis and NMR spectroscopies, cyclic voltammetry, X-ray absorption spectroscopy (XAS) measurements, and comparison of salient bond metrics derived from X-ray single-crystal structural characterization. In combination, these data are consistent with a low-valent vanadium ion in complexes 2 and 4. This study represents the first example of a metathesis reaction between the P-atom of [PCO]- and an alkylidyne ligand.

In Search of Fulminate Analogues: Ln M≡CP=NR.

The "CPNR" ligand may be viewed as being isolobal with fulminate, CNO; however, attempts to prepare a complex of such a ligand resulted instead in a range of novel imino and aminophosphinocarbyne complexes. Sequential treatment of [Mo(≡CBr)(CO)2 (Tp*)] (Tp*=hydrotris(dimethylpyrazolyl)borate) with nBuLi and ClP=NMes* (Mes*=C6 H2 tBu3 -2,4,6) afforded mixtures of the complexes [Mo(≡CPnBuNHMes*)(CO)2 (Tp*)] and traces of the bimetallic products [Mo2 {µ2 -C2 P2 O(NHMes)2 }(CO)4 (Tp*)2 ] and [Mo2 (µ2 -C2 PNHMes)(CO)4 (Tp*)2 ]. The reaction of [W(≡CBr)(CO)2 (Tp*)] with nBuLi and ClP=NMes* afforded predominantly the mononuclear carbyne [W{≡CP(=NMes*)nBu2 })(CO)2 (Tp*)] and traces of the binuclear complex [W2 (µ-C2 PNHMes)(CO)4 (Tp*)2 ] which is also obtained when tBuLi is used. Although not isolable, the intended complexes [M(≡CPNMes*)(CO)2 (Tp*)] could be generated in situ and spectroscopically characterized via the reactions of the stannyl carbynes [M(≡CSnnBu3 )(CO)2 (Tp*)] and ClP=NMes*. The preceding observations are mechanistically interpreted with reference to a computational interrogation of the model complex [Mo(≡CP=NCH3 )(CO)2 (Tp*)], the LUMO of which has considerable phosphorus character.

Well-Defined Alkyne Metathesis Catalysts: Developments and Recent Applications.

Although alkyne metathesis has been known for 50 years, rapid progress in this field has mostly occurred during the last two decades. In this article, the development of several highly efficient and thoroughly studied alkyne metathesis catalysts is reviewed, which includes novel well-defined, in situ formed and heterogeneous systems. Various alkyne metathesis methodologies, including alkyne cross-metathesis (ACM), ring-closing alkyne metathesis (RCAM), cyclooligomerization, acyclic diyne metathesis polymerization (ADIMET), and ring-opening alkyne metathesis polymerization (ROAMP), are presented, and their application in natural product synthesis, materials science as well as supramolecular and polymer chemistry is discussed. Recent progress in the metathesis of diynes is also summarized, which gave rise to new methods such as ring-closing diyne metathesis (RCDM) and diyne cross-metathesis (DYCM).

Molybdenum Alkylidyne Complexes with Tripodal Silanolate Ligands: The Next Generation of Alkyne Metathesis Catalysts.

A new type of molybdenum alkylidyne catalysts for alkyne metathesis is described, which is distinguished by an unconventional podand topology. These structurally well-defined complexes are easy to make on scale and proved to be tolerant toward numerous functional groups; even certain protic substituents were found to be compatible. The new catalysts were characterized by X-ray crystallography and by spectroscopic means, including 95 Mo NMR.

Unraveling the Mechanism of 1,3-Diyne Cross-Metathesis Catalyzed by Silanolate-Supported Tungsten Alkylidyne Complexes.

The benzylidyne complex [PhC≡W{OSi(OtBu)3 }3 ] (1) catalyzed the cross-metathesis between 1,4-bis(trimethylsilyl)-1,3-butadiyne (2) and symmetrical 1,3-diynes (3) efficiently, which gave access to TMS-capped 1,3-diynes RC≡C-C≡CSiMe3 (4). Diyne cross-metathesis (DYCM) studies with 13 C-labeled diyne PhC≡13 C-13 C≡CPh (3*) revealed that this reaction proceeds through reversible carbon-carbon triple-bond cleavage and formation according to the conventional mechanism of alkyne metathesis. The reaction between 1 and 3* afforded the 3-phenylpropynylidyne complex PhC≡13 C-13 C≡W{OSi(OtBu)3 }3 ] (5*), indicating that alkynylalkylidyne complexes are likely to act as catalytically active species. Attempts to isolate 5* from mixtures of 1 and 3* afforded crystals of the ditungsten 2-butyne-1,4-diylidyne complex [(tBuO)3 SiO}3 W≡13 C-13 C≡13 C-13 C≡W{OSi(OtBu)3 }3 ] (6*), which was additionally characterized by X-ray diffraction analysis. Depolymerization-macrocyclization of a carbazole-butadiyne polymer, obtained from 3,6-diethynyl-9-dodecylcarbazole (7) under copper-catalyzed Hay coupling conditions, was also efficiently catalyzed by 1 and afforded a mixture of mono-, diyne- and triyne-containing tetrameric macrocycles, revealing that diyne disproportionation into monoynes and triynes occurs as a slow side reaction that interferes with a high diyne metathesis selectivity. Potential catalytic pathways were studied by means of quantum-chemical calculations, and kinetic studies were performed to substantiate an α,α-mechanism for the catalytic diyne metathesis reaction, which involves intermediate alkynylalkylidyne and α,α'-dialkynylmetallacyclobutadiene intermediates.

Efficient catalytic alkyne metathesis with a fluoroalkoxy-supported ditungsten(III) complex.

The molybdenum and tungsten complexes M2(OR)6 (Mo2F6, M = Mo, R = C(CF3)2Me; W2F3, M = W, R = OC(CF3)Me2) were synthesized as bimetallic congeners of the highly active alkyne metathesis catalysts [MesC≡M{OC(CF3) n Me3- n }] (MoF6, M = Mo, n = 2; WF3, M = W, n = 1; Mes = 2,4,6-trimethylphenyl). The corresponding benzylidyne complex [PhC≡W{OC(CF3)Me2}] (W Ph F3) was prepared by cleaving the W≡W bond in W2F3 with 1-phenyl-1-propyne. The catalytic alkyne metathesis activity of these metal complexes was determined in the self-metathesis, ring-closing alkyne metathesis and cross-metathesis of internal and terminal alkynes, revealing an almost equally high metathesis activity for the bimetallic tungsten complex W2F3 and the alkylidyne complex W Ph F3. In contrast, Mo2F6 displayed no significant activity in alkyne metathesis.

Highly Active Multidentate Ligand-Based Alkyne Metathesis Catalysts.

Alkyne metathesis catalysts composed of molybdenum(VI) propylidyne and multidentate tris(2-hydroxylbenzyl)methane ligands have been developed, which exhibit excellent stability (remains active in solution for months at room temperature), high activity, and broad functional-group tolerance. The homodimerization and cyclooligomerization of monopropynyl or dipropynyl substrates, including challenging heterocycle substrates (e.g., pyridine), proceed efficiently at 40-55 °C in a closed system. The ligand structure and catalytic activity relationship has been investigated, which shows that the ortho groups of the multidentate phenol ligands are critical to the stability and activity of such a catalyst system.

Ring-Closing Metathesis of Functionalized Acetylene Derivatives: A New Entry into Cycloalkynes.

A tungsten alkylidyne catalyst is the key to achieving ring-closing metatheses of diynes to form functionalized macrocycles [Eq. (a)]. Partial reduction of the cycloalkynes provides stereoselective Z-configured cycloalkenes, which are currently inaccessible by conventional alkene metathesis.