Amine-functionalized porous silica production via ex- and in-situ method using silicate precursors as a selective adsorbent for CO2 capture applications.

A comparison of the amine-modified silica particle's characteristics via ex- and in-situ routes and their application as a CO2 gas adsorbent is reported. Modifying silica particles via ex-situ involves two separate steps: forming porous silica particles with sodium lauryl sulfate (SLS) as a template and impregnation using ultrasound assistance. In contrast to ex-situ modification, in-situ modification of silica particles is carried out in one step by mixing directly between the silica source and the modifying agent. Controlling the characteristics of modified silica particles via in-situ is carried out by adding an SLS template removed simultaneously with particle formation to increase the surface area and porosity. Increasing the SLS template concentration shows a linear relationship between increasing particle surface area and amine loading. However, two different modification routes exert a direct influence on aminopropyl distribution. Silanization via in-situ which involves a simultaneous condensation reaction produces a higher amine loading reaching 1.2845 mmol/g of silica than via ex-situ which is only 0.9610 mmol/g of silica. The amount of aminopropyl that can be grafted on the silica surface shows a linear relationship to the quantity of CO2 gas adsorption capacity. Amine-modified silica particles obtained the highest adsorption capability via the in-situ route with an SLS 3 CMC template of 2.32 mmol/g silica at an operating pressure of 6 bar.

Enhancing GFRP fatigue durability for chassis component applications through glass fiber coupling variation.

As the landscape of mobility trends continues to evolve, concerted efforts have been made to incorporate Carbon Fiber Reinforced Plastic (CFRP) into automotive components. However, the substantial increase in cost relative to the achieved weight reduction has limited its widespread adoption. Consequently, research endeavors have focused on exploring alternative composite materials, adapting fibers such as glass fibers, natural fibers, and recycled fibers, to reduce the cost of composite components. Of particular interest in the automotive industry is the utilization of Glass Fiber Reinforced Plastic (GFRP) in chassis components like leaf springs. Nevertheless, the development of GFRP leaf springs encounters a significant challenge related to the adhesive strength at the interface between epoxy resin and glass fibers, which is crucial for enhancing fatigue durability. While glass fibers were traditionally paired with unsaturated polyester or vinyl ester matrices, the pursuit of improved durability has led to the adoption of epoxy matrices. Regrettably, this transition has not consistently yielded the expected gains in interfacial adhesion. In light of these challenges, this study systematically compares the interfacial adhesion strength and fatigue endurance performance. For comparison, two coupling agents widely used commercially, amino silane and epoxy silane, were selected. Glass fibers treated with each coupling agent were purchased commercially, and glass fiber-reinforced plastic (GFRP) specimens were fabricated using the HP-RTM (High-Pressure Resin Transfer Molding) method. Static property evaluations and fatigue durability assessments were conducted using the fabricated specimens. The results showed that when epoxy silane was used as the coupling agent, the interlaminar shear strength (ILSS) increased by approximately 7 %. Furthermore, SEM(Scanning Electron Microscopes) analysis confirmed a significant enhancement in interfacial adhesion, providing support for the ILSS evaluation results. Consequently, the fatigue durability performance improved by approximately six-fold. This confirms that the improvement in interfacial adhesion due to the change in coupling agents led to enhanced fatigue durability performance.

Superhydrophilic Modification of Polycarbonate Substrate Surface by Organic Plasma Polymerization Film.

Superhydrophilicity performs well in anti-fog and self-cleaning applications. In this study, polycarbonate substrate was used as the modification object because of the low surface energy characteristics of plastics. Procedures that employ plasma bombardment, such as etching and high surface free energy coating, are applied to improve the hydrophilicity. An organic amino silane that contains terminal amine group is introduced as the monomer to perform plasma polymerization to ensure that hydrophilic radicals can be efficiently deposited on substrates. Different levels of hydrophilicity can be reached by modulating the parameters of plasma bombardment and polymerization, such as plasma current, voltage of the ion source, and bombardment time. The surface of a substrate that is subjected to plasma bombarding at 150 V, 4 A for 5 min remained superhydrophilic for 17 days. After 40 min of Ar/O2 plasma bombardment, which resulted in a substrate surface roughness of 51.6 nm, the plasma polymerization of organic amino silane was performed by tuning the anode voltage and operating time of the ion source, and a water contact angle < 10° and durability up to 34 days can be obtained.

New Insights into Amino-Functionalization of Magnetic Nanoplatelets with Silanes and Phosphonates.

Magnetic nanoplatelets (NPLs) based on barium hexaferrite (BaFe12O19) are suitable for many applications because of their uniaxial magneto-crystalline anisotropy. Novel materials, such as ferroic liquids, magneto-optic composites, and contrast agents for medical diagnostics, were developed by specific surface functionalization of the barium hexaferrite NPLs. Our aim was to amino-functionalize the NPLs' surfaces towards new materials and applications. The amino-functionalization of oxide surfaces is challenging and has not yet been reported for barium hexaferrite NPLs. We selected two amine ligands with two different anchoring groups: an amino-silane and an amino-phosphonate. We studied the effect of the anchoring group, backbone structure, and processing conditions on the formation of the respective surface coatings. The core and coated NPLs were examined with transmission electron microscopy, and their room-temperature magnetic properties were measured. The formation of coatings was followed by electrokinetic measurements, infrared and mass spectroscopies, and thermogravimetric analysis. The most efficient amino-functionalization was enabled by (i) amino-silanization of the NPLs precoated with amorphous silica with (3-aminopropyl)triethoxysilane and (ii) slow addition of amino-phosphonate (i.e., sodium alendronate) to the acidified NPL suspension at 80 °C.

Most suitable amino silane molecules for surface functionalization of graphene oxide toward hexavalent chromium adsorption.

Adsorption is a simple and effective method for the removal of hexavalent chromium (Cr(VI)) from contaminated water. Several amino silane-graphene oxide (GO) composites with different species of amino groups (pN-GO, psN-GO, and pssN-GO; p: primary, s: secondary, N: amine) were evaluated to investigate their adsorption capacity and the effects of primary and secondary amines on Cr(VI) adsorption. We conducted a quantitative analysis to reveal the difference between primary and secondary amines in terms of Cr(VI) removal efficiency. A synergic effect was observed between the neighboring secondary amines in pssN-GO. From the Langmuir model prediction, we found that the composite with pssN-GO exhibited the highest maximum adsorption capacity (260.74 mg/g), followed by those with psN-GO (208.22 mg/g) and pN-GO (189.47 mg/g). Monolayer adsorption was more dominant when using pssN-GO, with the pseudo-second-order model best fitting the kinetic experiment results, whereas multilayer adsorption was dominant when using psN-GO and pN-GO.

One minute synthesis of amino-silane functionalized superparamagnetic iron oxide nanoparticles by sonochemical method.

Superparamagnetic iron oxide nanoparticles (SPION) are material of interest for biomedical research and related applications. Recently, several works have reported facile sonochemical method of functionalizing nanoparticles with organic coupling agents. Herein, we present the influence of ultrasonic irradiation on the rate of functionalization of 3-amino propyl triethoxyl silane (APTES) on SPION. The effect of sonication on the process is investigated by varying the sonication period between 1 and 20min. Grafting of the organo-metallic molecules on SPION is demonstrated through FTIR and XPS. The results show that in one minute, organo-silane compound can be functionalized onto SPION through unique conditions generated from ultrasonic irradiation. The XPS survey spectra of the as-synthesized APTES-SPION at different sonication periods revealed that absorbed energy due to silanization reactions in all the samples appeared at same peaks. The percentage atomic concentrations of all the elements present in the as-synthesized APTES-SPION are determined by the software CASAXPS. The result demonstrated that highest percentage atomic concentration is observed at the one minute sonication period.