A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity.

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Strong Interface Coupling Enables Stability of Amorphous Meta-Stable State in CoS/Ni3S2 for Efficient Oxygen Evolution.

Rational design of heterostructure catalysts through phase engineering strategy plays a critical role in heightening the electrocatalytic performance of catalysts. Herein, a novel amorphous/crystalline (a/c) heterostructure (a-CoS/Ni3S2) is manufactured by a facile hydrothermal sulfurization method. Strikingly, the interface coupling between amorphous phase (a-CoS) and crystalline phase (Ni3S2) in a-CoS/Ni3S2 is much stronger than that between crystalline phase (c-CoS) and crystalline phase (Ni3S2) in crystalline/crystalline (c/c) heterostructure (c-CoS/Ni3S2) as control sample, which makes the meta-stable amorphous structure more stable. Meanwhile, a-CoS/Ni3S2 has more S vacancies (Sv) than c-CoS/Ni3S2 because of the presence of an amorphous phase. Eventually, for the oxygen evolution reaction (OER), the a-CoS/Ni3S2 exhibits a significantly lower overpotential of 192 mV at 10 mA cm-2 compared to the c-CoS/Ni3S2 (242 mV). An exceptionally low cell voltage of 1.51 V is required to achieve a current density of 50 mA cm-2 for overall water splitting in the assembled cell (a-CoS/Ni3S2 || Pt/C). Theoretical calculations reveal that more charges transfer from a-CoS to Ni3S2 in a-CoS/Ni3S2 than in c-CoS/Ni3S2, which promotes the enhancement of OER activity. This work will bring into play a fabrication strategy of a/c catalysts and the understanding of the catalytic mechanism of a/c heterostructures.

Interfacial Electronic Interaction in Amorphous-Crystalline CeOx-Sn Heterostructures for Optimizing CO2 to Formate Conversion.

Formate, a crucial chemical raw material, holds significant promise for industrial applications in the context of CO2 electroreduction reaction (CO2RR). Despite its potential, challenges, such as poor selectivity and low formation rate at high current densities persist, primarily due to the competing hydrogen evolution reaction (HER) and high energy barriers associated with *OCHO intermediate generation. Herein, one-step chemical co-reduction strategy is employed to construct an amorphous-crystalline CeOx-Sn heterostructure, demonstrating remarkable catalytic performance in converting CO2 to formate. The optimized CeOx-Sn heterostructures reach a current density of 265.1 mA cm-2 and a formate Faraday efficiency of 95% at -1.07 V versus RHE. Especially, CeOx-Sn achieves a formate current density of 444.4 mA cm-2 and a formate production rate of 9211.8 µmol h-1 cm-2 at -1.67 V versus RHE, surpassing most previously reported materials. Experimental results, coupled with （density functional theory）DFT calculations confirm that robust interface interaction between CeOx and Sn active center induces electron transfer from crystalline Sn site to amorphous CeOx, some Ce4+of CeOx get electrons and convert to unsaturated Ce3+, optimizing the electronic structure of active Sn. This amorphous-crystalline heterostructure promotes electron transfer during CO2RR, reducing the energy barrier formed by *OCHO intermediates, and thus achieving efficient reduction of CO2 to formate.

Application of Amorphous-Crystalline Coupling Materials in Electrocatalysis.

Interface engineering has proven to be a highly efficient strategy for modulating the physicochemical properties of electrocatalysts and further enhancing their electrochemical performance in related energy applications. In this context, the newly proposed crystalline-amorphous (c-a) heterostructures with unusual atomic arrangements at interfaces show strong competitiveness. Nonetheless, few efforts have been made to reveal and summarize the structure-activity relationship at the two-phase interface and the corresponding electrocatalytic mechanism. This concept is devoted to comprehensively discussing the fundamental characteristics of crystalline-amorphous electrocatalysts and their application in the field of energy conversion with typical examples. In addition, the development prospects and opportunities of crystalline-amorphous heterostructure are summarized to provide potential development directions for other types of clean energy development.

Tailoring Metal-Oxygen Bonds Boosts Oxygen Reaction Kinetics for High-Performance Zinc-Air Batteries.

Metal-oxygen bonds significantly affect the oxygen reaction kinetics of metal oxide-based catalysts but still face the bottlenecks of limited cognition and insufficient regulation. Herein, we develop a unique strategy to accurately tailor metal-oxygen bond structure via amorphous/crystalline heterojunction realized by ion-exchange. Compared with pristine amorphous CoSnO3-y, iron ion-exchange induced amorphous/crystalline structure strengthens the Sn-O bond, weakens the Co-O bond strength, and introduces additional Fe-O bond, accompanied by abundant cobalt defects and optimal oxygen defects with larger pore structure and specific surface area. The optimization of metal-oxygen bond structure is dominated by the introduction of crystal structure and further promoted by the introduction of Fe-O bond and rich Co defect. Remarkably, the Fe doped amorphous/crystalline catalyst (Co1-xSnO3-y-Fe0.021-A/C) demonstrates excellent oxygen evolution reaction and oxygen reduction reaction activities with a smaller potential gap (ΔE = 0.687 V), and the Zn-air battery based with Co1-xSnO3-y-Fe0.021-A/C exhibits excellent output power density, cycle performance, and flexibility.

Amorphous FeSnOx Nanosheets with Hierarchical Vacancies for Room-Temperature Sodium-Sulfur Batteries.

Room-temperature sodium-sulfur (RT Na-S) batteries, noted for their low material costs and high energy density, are emerging as a promising alternative to lithium-ion batteries (LIBs) in various applications including power grids and standalone renewable energy systems. These batteries are commonly assembled with glass fiber membranes, which face significant challenges like the dissolution of polysulfides, sluggish sulfur conversion kinetics, and the growth of Na dendrites. Here, we develop an amorphous two-dimensional (2D) iron tin oxide (A-FeSnOx) nanosheet with hierarchical vacancies, including abundant oxygen vacancies (Ovs) and nano-sized perforations, that can be assembled into a multifunctional layer overlaying commercial separators for RT Na-S batteries. The Ovs offer strong adsorption and abundant catalytic sites for polysulfides, while the defect concentration is finely tuned to elucidate the polysulfides conversion mechanisms. The nano-sized perforations aid in regulating Na ions transport, resulting in uniform Na deposition. Moreover, the strategic addition of trace amounts of Ti3C2 (MXene) forms an amorphous/crystalline (A/C) interface that significantly improves the mechanical properties of the separator and suppresses dendrite growth. As a result, the task-specific layer achieves ultra-light (~0.1 mg cm-2), ultra-thin (~200 nm), and ultra-robust (modulus=4.9 GPa) characteristics. Consequently, the RT Na-S battery maintained a high capacity of 610.3 mAh g-1 and an average Coulombic efficiency of 99.9 % after 400 cycles at 0.5 C.

Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications.

Interface engineering of heterostructures has proven a promising strategy to effectively modulate their physicochemical properties and further improve the electrochemical performance for various applications. In this context related research of the newly proposed amorphous-crystalline heterostructures have lately surged since they combine the superior advantages of amorphous- and crystalline-phase structures, showing unusual atomic arrangements in heterointerfaces. Nonetheless, there has been much less efforts in systematic analysis and summary of the amorphous-crystalline heterostructures to examine their complicated interfacial interactions and elusory active sites. The critical structure-activity correlation and electrocatalytic mechanism remain rather elusive. In this review, the recent advances of amorphous-crystalline heterostructures in electrochemical energy conversion and storage fields are amply discussed and presented, along with remarks on the challenges and perspectives. Initially, the fundamental characteristics of amorphous-crystalline heterostructures are introduced to provide scientific viewpoints for structural understanding. Subsequently, the superiorities and current achievements of amorphous-crystalline heterostructures as highly efficient electrocatalysts/electrodes for hydrogen evolution reaction, oxygen evolution reaction, supercapacitor, lithium-ion battery, and lithium-sulfur battery applications are elaborated. At the end of this review, future outlooks and opportunities on amorphous-crystalline heterostructures are also put forward to promote their further development and application in the field of clean energy.

Amorphous-Crystalline Interfaces on Hollow Nanocubes Derived from Ir-Doped Ni-Fe-Zn Prussian Blue Analog Enables High Capability of Alkaline/Acidic/Saline Water Oxidations.

Development of highly efficient and robust electrocatalysts for oxygen evolution reaction (OER) under specific electrolyte is a key to actualize commercial low-temperature water electrolyzers. Herein, a rational catalyst design strategy is first reported based on amorphous-crystalline (a-c) interfacial engineering to achieve high catalytic activity and durability under diverse electrolytes that can be used for all types of low-temperature water electrolysis. Abundant a-c interface (ACI) is implemented into a hollow nanocubic (pre)-electrocatalyst which is derived from Ir-doped Ni-Fe-Zn Prussian blue analogues (PBA). The implemented c-a interface is well maintained during prolonged OER in alkaline, alkalized saline, and acidic electrolytes demonstrating its diverse functionality for water electrolysis. Notably, the final catalyst exhibits superior catalytic activity with excellent durability for OER compared to that of benchmark IrO2 catalyst, regardless of chemical environment of electrolytes. Hence, this work can be an instructive guidance for developing the ACI engineered electroctalyst which can be diversely used for different types of low-temperature electrolyzers.

A Facile Molecular Approach to Amorphous Nickel Pnictides and Their Reconstruction to Crystalline Potassium-Intercalated γ-NiOOHx Enabling High-Performance Electrocatalytic Water Oxidation and Selective Oxidation of 5-Hydroxymethylfurfural.

The low-temperature molecular precursor approach can be beneficial to conventional solid-state methods, which require high temperatures and lead to relatively large crystalline particles. Herein, a novel, single-step, room-temperature preparation of amorphous nickel pnictide (NiE; EP, As) nanomaterials is reported, starting from NaOCE(dioxane)n and NiBr2 (thf)1.5 . During application for the oxygen evolution reaction (OER), the pnictide anions leach, and both materials fully reconstruct into nickel(III/IV) oxide phases (similar to γ-NiOOH) comprising edge-sharing (NiO6 ) layers with intercalated potassium ions and a d-spacing of 7.27 Å. Remarkably, the intercalated γ-NiOOHx phases are nanocrystalline, unlike the amorphous nickel pnictide precatalysts. This unconventional reconstruction is fast and complete, which is ascribed to the amorphous nature of the nanostructured NiE precatalysts. The obtained γ-NiOOHx can effectively catalyse the OER for 100 h at a high current density (400 mA cm-2 ) and achieves outstandingly high current densities (>600 mA cm-2 ) for the selective, value-added oxidation of 5-hydroxymethylfurfural (HMF). The NiP-derived γ-NiOOHx shows a higher activity for both processes due to more available active sites. It is anticipated that the herein developed, effective, room-temperature molecular synthesis of amorphous nickel pnictide nanomaterials can be applied to other functional transition-metal pnictides.

Sulfur-Induced Low Crystallization of Ultrathin Pd Nanosheet Arrays for Sulfur Ion Degradation-Assisted Energy-Efficient H2 Production.

The utilization of thermodynamically favorable sulfur oxidation reaction (SOR) as an alternative to sluggish oxygen evolution reaction is a promising technology for low-energy H2 production while degrading the sulfur source from wastewater. Herein, amorphous/crystalline S-doped Pd nanosheet arrays on nickel foam (a/c S-Pd NSA/NF) is prepared by S-doping crystalline Pd NSA/NF.  Owing to the ultrathin amorphous nanosheet structure and the incorporation of S atoms, the a/c S-Pd NSA/NF provides a large number of active sitesand the optimized electronic structure, while exhibiting outstanding electrocatalytic activity in hydrogen evolution reaction (HER) and SOR. Therefore, the coupling system consisting of SOR-assisted HER can reach a current density of 100 mA cm-2 at 0.642 V lower than conventional electrolytic water by 1.257 V, greatly reducing energy consumption. In addition, a/c S-Pd NSA/NF can generate H2 over a long period of time while degrading S2- in water to the value-added sulfur powder, thus further reducing the cost of H2 production. This work proposes an attractive strategy for the construction of an advanced electrocatalyst for H2 production and utilization of toxic sulfide wastewater by combining S-doping induced partial amorphization and ultrathin metal nanosheet arrays.

A General Synthesis of Crystal Phase Controllable Aerogels for Efficient Hydrogen Evolution.

Amorphous/crystalline (a/c) hetero-phase structures are considered as a class of efficient electrocatalysts for hydrogen evolution reaction (HER), but it remains a substantial challenge to obtain the specific phase by phase-selective synthesis. In this work, a general route for the preparation of various heterogeneous aerogels (RuB, PtB, PdB, and RhB) consisting of amorphous and crystalline phases is presented through a controlled NaBH4 reduction method. The prepared a/c-RuB aerogel exhibits better HER performance due to their desirable compositional and structural advantages such as more exposed active sites, optimized electronic structure, and interfacial synergistic effects. It requires only a low overpotential of 39 mV to reach a density of 10 mA cm-2 and also exhibits excellent stability. This work provides a new phase-selective synthesis strategy for the design and development of advanced hetero-phase electrocatalysts.

Enriched Fe Doped on Amorphous Shell Enable Crystalline@Amorphous Core-Shell Nanorod Highly Efficient Electrochemical Water Oxidation.

The rational design of efficient and cost-effective electrocatalysts for oxygen evolution reaction (OER) with sluggish kinetics, is imperative to diverse clean energy technologies. The performance of electrocatalyst is usually governed by the number of active sites on the surface. Crystalline/amorphous heterostructure has exhibited unique properties and opens new paradigms toward designing electrocatalysts with abundant active sites for improved performance. Hence, Fe doped Ni-Co phosphite (Fe-NiCoHPi) electrocatalyst with cauliflower-like structure, comprising crystalline@amorphous core-shell nanorod, is reported. The experiments uncover that Fe is enriched in the amorphous shell due to the flexibility of the amorphous component. Further density functional theory calculations indicate that the strong electronic interaction between the enriched Fe in the amorphous shell and crystalline core host at the core-shell interface, leads to balanced binding energies of OER intermediates, which is the origin of the catalyst-activity. Eventually, the Fe-NiCoHPi exhibits remarkable activity, with low overpotentials of only 206 and 257 mV at current density of 15 and 100 mA cm-2 . Unceasing durability over 90 h is achieved, which is superior to the effective phosphate electrocatalysts. Although the applications at high current remain challenges , this work provides an approach for designing advanced OER electrocatalysts for sustainable energy devices.

Synthesis of Amorphous/Crystalline Hetero-Phase Nanozymes With Peroxidase-Like Activity by Coordination-Driven Self-Assembly for Biosensors.

Nanozymes and amorphous nanomaterials attract great attention owing to their extraordinary properties. However, the requirements for special synthesis conditions become the bottleneck of their development. Herein, a new strategy involving the DNA-based coordination-driven self-assembly is reported for the synthesis of a novel amorphous/crystalline hetero-phase nanozyme (Fe-DNA). For the synthesis of both nanozymes and amorphous materials, this strategy is simple and controllable, avoiding the traditionally employed harsh conditions. Benefitting from the amorphous structure and the superior physicochemical properties, the synthesized Fe-DNA nanozyme is subsequently found to exhibit a smaller Michaelis constant value for hydrogen peroxide (H2 O2 ) (0.81 mm) than that of horseradish peroxidase (HRP) (3.70 mm), demonstrating the stronger affinity of the Fe-DNA nanozyme toward H2 O2 . The Fe-DNA nanozyme also shows significant peroxidase-like activity but only negligible oxidase-like activity, a characteristic which releases the corresponding assay system from oxygen interference, thereby improving the performance of the nanozyme-based sensing platform. In addition, compared with other nanozymes, the novel Fe-DNA nanozyme is degradable via phosphate; thus, mitigating potential environmental threat. This work provides novel amorphous/crystalline hetero-phase nanozymes and opens a new avenue for the design of amorphous nanomaterials and nanozymes.

Ultra-Low Pt Doping and Pt-Ni Pair Sites in Amorphous/Crystalline Interfacial Electrocatalyst Enable Efficient Alkaline Hydrogen Evolution.

Noble metal doping can achieve an increase in mass activity (MA) without sacrificing catalysis efficiency and stability, so that alkaline hydrogen evolution reaction (HER) performance of the catalyst can be optimized to the maximum degree. However, its excessively large ionic radius makes it difficult to achieve either interstitial doping or substitutional doping under mild conditions. Herein, a hierarchical nanostructured electrocatalyst with enriched amorphous/crystalline interfaces for high-efficiency alkaline HER is reported, which is composed of amorphous/crystalline (Co, Ni)11 (HPO3 )8 (OH)6 homogeneous hierarchical structure with an ultra-low doped Pt (Pt-a/c-NiHPi). Benefiting from the structural flexibility of the amorphous component, extremely low Pt (0.21 wt.%, totally 3.31 µg Pt on 1 cm-2 NF) are stably doped on it via a simple two-phase hydrothermal method. The DFT calculations show that due to the strongly electron transfer between the crystalline/amorphous components at the interfaces, electrons finally concentrate toward Pt and Ni in the amorphous components, thus the electrocatalyst has near-optimal energy barriers and adsorption energy for H2 O* and H* . With the above benefits, the obtained catalyst exhibits an exceptionally high MA (39.1 mA µg-1 Pt ) at 70 mV, which is almost the highest level among the reported Pt-based electrocatalysts for alkaline HER.

Turn "Waste" Into Wealth: MoO2 @coal Gangue Electrocatalyst with Amorphous/Crystalline Heterostructure for Efficient Li-O2 Batteries.

Unreasonable accumulation of coal gangue in mining area has become the major source of global pollution. Probing the high-valued utilization of coal gangue has become a key approach to address the problem. Herein, a promising catalyst of MoO2 @coal gangue with amorphous/crystalline heterostructure derived from mine solid waste, which acts as an efficient cathode for Li-O2 batteries is first reported. Impressively, the as-prepared catalyst exhibits a favorable initial discharge capacity of 9748 mAh g-1 and promising long-term cyclic stability over 2200 h. Experimental results coupled with density functional theory (DFT) analysis reveal that the synergistic interaction between high-activity MoO2 and stable SiO2 , unique amorphous/crystalline heterostructure and the modified interfacial adsorption of LiO2 intermediate are critical factors in promoting the electrochemical performance. This work provides a new insight to design marked electrocatalysts by mine solid waste for Li-O2 batteries.

Oxygen Vacancies and Interface Engineering on Amorphous/Crystalline CrOx -Ni3 N Heterostructures toward High-Durability and Kinetically Accelerated Water Splitting.

Manipulating catalytic active sites and reaction kinetics in alkaline media is crucial for rationally designing mighty water-splitting electrocatalysts with high efficiency. Herein, the coupling between oxygen vacancies and interface engineering is highlighted to fabricate a novel amorphous/crystalline CrOx -Ni3 N heterostructure grown on Ni foam for accelerating the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Density functional theory (DFT) calculations reveal that the electron transfer from amorphous CrOx to Ni3 N at the interfaces, and the optimized Gibbs free energies of H2 O dissociation (ΔGH-OH ) and H adsorption (ΔGH ) in the amorphous/crystalline CrOx -Ni3 N heterostructure are conducive to the superior and stable HER activity. Experimental data confirm that numerous oxygen vacancies and amorphous/crystalline interfaces in the CrOx -Ni3 N catalysts are favorable for abundant accessible active sites and enhanced intrinsic activity, resulting in excellent catalytic performances for HER and OER. Additionally, the in situ reconstruction of CrOx -Ni3 N into highly active Ni3 N/Ni(OH)2 is responsible for the optimized OER performance in a long-term stability test. Eventually, an alkaline electrolyzer using CrOx -Ni3 N as both cathode and anode has a low cell voltage of 1.53 V at 10 mA cm-2 , together with extraordinary durability for 500 h, revealing its potential in industrial applications.

An Amorphous-Crystalline Nanosheet Arrays Structure for Ultrahigh Electrochemical Performance Supercapattery.

Hybrid supercapacitors (HSCs), also called supercapattery, which can substitute for low power density batteries have attracted extensive interest. However, when HSCs comes to commercial applications, there is still space for improvement in energy density. It seems that designing of electrode with high capacity is an effective measure. Herein, amorphous-crystalline MoO3 -Ni3 S2 /NF-0.5 nanosheet arrays are developed as battery-type electrodes. Specifically, the sheet-like structure of crystalline Ni3 S2 can achieve rich structural nanocrystallization, improving the redox reaction efficiency. Meanwhile, the disordered structure and irregular surface of the amorphous MoO3 are conducive to maximize the contact between the electrode and electrolyte, slowing down the volume change caused by the continuous charge-discharge process. As a result, it displays an ultrahigh areal specific capacity of 8.52 C cm-2 at 5 mA cm-2 , and superior lifespan up to 7500 cycles with 90.0% retention. Further, when assembled into HSCs, the specific capacity reaches 1.47 C cm-2 , corresponding to an energy density of 4.18 mWh cm-2 at a power density of 0.34 mW cm-2 . Totally, the design of the unique structure displays a valuable measure for rational development of high energy density hybrid energy storage devices that are not limited to supercapacitors.

Repurposing Melt Degradation for the Evaluation of Mixed Amorphous-Crystalline Blends.

Medicine regulators require the melting points for crystalline drugs, as they are a test for chemical and physical quality. Many drugs, especially salt-forms, suffer concomitant degradation during melting; thus, it would be useful to know if the endotherm associated with melt degradation may be used for characterising the crystallinity of a powder blend. Therefore, the aim of this study was to investigate whether melt-degradation transitions can detect amorphous content in a blend of crystalline and amorphous salbutamol sulphate. Salbutamol sulphate was rendered amorphous by freeze and spray-drying and blended with crystalline drug, forming standards with a range of amorphous content. Crystalline salbutamol sulphate was observed to have a melt-degradation onset of 198.2±0.2°C, while anhydrous amorphous salbutamol sulphate prepared by either method showed similar glass transition temperatures of 119.4±0.7°C combined. Without the energy barrier provided by the ordered crystal lattice, the degradation endotherm for amorphous salbutamol sulphate occurred 50°C below the melting point, with an onset of 143.6±0.2°C. The enthalpies for this degradation transition showed no significant difference between freeze- and spray-dried samples (p>0.05). Distinct from convention, partial integration of the crystalline melt-degradation endotherm was applied to the region 193-221°C which had no contribution from the degradation of amorphous salbutamol sulphate. The linear correlation of these partial areas with amorphous content, R2=0.994, yielded limits of detection and quantification of 0.13% and 0.44% respectively, independent of drying technique. Melt-degradation transitions may be re-purposed for the measurement of amorphous content in powder blends, and they have potential for evaluating disorder more generally.

Two-dimensional confined topotactic transformation to produce Co-Pi/Co3O4 hybrid porous nanosheets for promoted water oxidation.

Exploring advanced electrocatalyst for the oxygen evolution reaction (OER) is of great importance in pursuing efficient and sustainable hydrogen production via electrolytic water splitting. Considering the structure-activity-stability relationship for designing advanced OER catalysts, two-dimensional (2D) porous catalyst with single crystallinity is deemed to be an ideal platform which could simultaneously endow enriched active sites, facile mass and charge transport ability as well as robust structural stability. Herein, we proposed a facile 2D confined topotactic phase transformation approach, which realizes the fabrication of highly porous single-crystalline Co3O4 nanosheets with in-situ surface modification of amorphous Co-Pi active species. Benefitted from the highly exposed undercoordinated cobalt sites, facilitated mass transport and facile 2D charge transfer pathway, the Co-Pi/Co3O4 hybrid porous nanosheets display enhanced OER activity with obvious pre-oxidation-induced activation. In addition, the operational stability was significantly improved owing to the strengthened structural stability which effectively buffers the internal strains and avoids the structural collapse during the electrochemical process. This work proposed a facile and mild method for the synthesis of amorphous/single-crystalline hybrid porous materials, and the achievement of synergistic modulation of active site density and charge transfer ability via targeted microstructural construction will shed light on catalyst design in the future.

Surface reconstruction in amorphous CoFe-based hydroxides/crystalline phosphide heterostructure for accelerated saline water electrolysis.

Developing electrocatalysts with high activity and robust performance for large-scale seawater electrolysis to produce hydrogen holds immense significance. Herein, a highly active bifunctional electrode composed of amorphous cobalt-iron layered double hydroxides (CoFeLDH) and crystalline nickel phosphide (Ni2P) (denoted as CoFeLDH@Ni2P), is employed to boost hydrogen production through seawater electrolysis. The strong interface coupling effectively modifies the electronic structure at active sites, thereby accelerating the catalytic reaction kinetics. Impressively, in situ Raman and post-stability analyses demonstrate a unique reconstruction behavior on the CoFeLDH@Ni2P electrode. Bimetal co-incorporated NiOOH (CoFe-NiOOH) and Ni(OH)2 species are formed during the oxygen evolution reaction (OER), while CoFeLDH@Ni2P can transform into Ni(OH)2 species during the hydrogen evolution reaction (HER) process. Furthermore, the highly negatively charged surface selectively rejects Cl- ions by formed PO43-, endowing CoFeLDH@Ni2P with excellent tolerance and promising durability in saline electrolytes. Consequently, the CoFeLDH@Ni2P electrode exhibits an overpotential of 106 mV for HER at 10 mA cm-2 and 308 mV for OER to achieve 100 mA cm-2 in 1.0 M KOH solution. Additionally, the CoFeLDH@Ni2P(+,-) electrolyzer requires a low cell voltage of 1.56 V to deliver 10 mA cm-2 in 1.0 M KOH + Seasalt. This work presents an appealing strategy for the rational design of advanced electrocatalysts with amorphous-crystalline interfaces, which reveals the source of the activity of transition-metal phosphating compounds in saline water electrolysis.