Accelerated fragmentation of two thermoplastics (polylactic acid and polypropylene) into microplastics after UV radiation and seawater immersion.

To better understand the fate and assess the ingestible fraction of microplastics (by aquatic organisms), it is essential to quantify and characterize of their released from larger items under environmental realistic conditions. However, the current information on the fragmentation and size-based characteristics of released microplastics, for example from bio-based thermoplastics, is largely unknown. The goal of our work was to assess the fragmentation and release of microplastics, under ultraviolet (UV) radiation and in seawater, from polylactic acid (PLA) items, a bio-based polymer, and from polypropylene (PP) items, a petroleum-based polymer. To do so, we exposed pristine items of PLA and PP, immersed in filtered natural seawater, to accelerated UV radiation for 57 and 76 days, simulating 18 and 24 months of mean natural solar irradiance in Europe. Our results indicated that 76-day UV radiation induced the fragmentation of parent plastic items and the microplastics (50 - 5000 µm) formation from both PP and PLA items. The PP samples (48 ± 26 microplastics / cm2) released up to nine times more microplastics than PLA samples (5 ± 2 microplastics / cm2) after a 76-day UV exposure, implying that the PLA tested items had a lower fragmentation rate than PP. The particles' length of released microplastics was parameterized using a power law exponent (α), to assess their size distribution. The obtained α values were 3.04 ± 0.11 and 2.54 ± 0.06 (-) for 76-day UV weathered PP and PLA, respectively, meaning that PLA microplastics had a larger sized microplastics fraction than PP particles. With respect to their two-dimensional shape, PLA microplastics also had lower width-to-length ratio (0.51 ± 0.17) and greater fiber-shaped fractions (16%) than PP microplastics (0.57 ± 0.17% and 11%, respectively). Overall, the bio-based PLA items under study were more resistant to fragmentation and release of microplastics than the petroleum-based PP tested items, and the parameterized characteristics of released microplastics were polymer-dependent. Our work indicates that even though bio-based plastics may have a slower release of fragmented particles under UV radiation compared to conventional polymer types, they still have the potential to act as a source of microplastics in the marine environment, with particles being available to biota within ingestible size fractions, if not removed before major fragmentation processes.

Sustainability of biodegradable plastics: a review on social, economic, and environmental factors.

In line with the recent economic growth, especially in developing countries, human concern for the environment has increased over time. This paradigm shift has influenced many developing countries to pay more attention to the issues related to the use of synthetic plastics. Both industry and consumers are intrigued to discover the: economic characteristics, environmental consequences, and social attitudes to the benefits of biodegradable plastics. Biodegradable plastics are useful in packaging, agriculture, gastronomy, consumer electronics, and the automotive industry. This paper seeks to explain the prospects of biodegradable plastics regarding social, economic, and environmental sustainability and recognizes the latest advances in enzyme-based biodegradation of plastics in order to reduce plastics' negative effects and to make the environment safe. A multi-disciplinary strategy is a unique approach, with studies carried out across the triple bottom line (TBL) approach on three distinct sustainability concepts (economic characteristics, environmental consequences, and social attitudes). These three subjects were carefully chosen for their respective targets. This paper has used ATLAS.ti 9 software tools to thoroughly analyze the literature to save, identify, and assess this study's data. Therefore, the research showed that the environmental component was the most critical factor with the economic second and social third. We review bio-based and biodegradable polymers and highlight the value of biodegradable end-of-life management.

Biocatalysis and biomass conversion: enabling a circular economy.

This paper is based on a lecture presented to the Royal Society in London on 24 June 2019. Two of the grand societal and technological challenges of the twenty-first century are the 'greening' of chemicals manufacture and the ongoing transition to a sustainable, carbon neutral economy based on renewable biomass as the raw material, a so-called bio-based economy. These challenges are motivated by the need to eliminate environmental degradation and mitigate climate change. In a bio-based economy, ideally waste biomass, particularly agricultural and forestry residues and food supply chain waste, are converted to liquid fuels, commodity chemicals and biopolymers using clean, catalytic processes. Biocatalysis has the right credentials to achieve this goal. Enzymes are biocompatible, biodegradable and essentially non-hazardous. Additionally, they are derived from inexpensive renewable resources which are readily available and not subject to the large price fluctuations which undermine the long-term commercial viability of scarce precious metal catalysts. Thanks to spectacular advances in molecular biology the landscape of biocatalysis has dramatically changed in the last two decades. Developments in (meta)genomics in combination with 'big data' analysis have revolutionized new enzyme discovery and developments in protein engineering by directed evolution have enabled dramatic improvements in their performance. These developments have their confluence in the bio-based circular economy. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

Biodegradable and bio-based polymers: future prospects of eco-friendly plastics.

Currently used plastics are mostly produced from petrochemical products, but there is a growing demand for eco-friendly plastics. The use of bio-based plastics, which are produced from renewable resources, and biodegradable plastics, which are degraded in the environment, will lead to a more sustainable society and help us solve global environmental and waste management problems.

Microplastics from agricultural mulch films: Biodegradation and ecotoxicity in freshwater systems.

The application of bio-based biodegradable mulch films in agriculture has raised environmental concerns regarding their potential impacts on adjacent freshwater ecosystems. This study investigated the biodegradation of microplastics derived from a bio-based biodegradable mulch (bio-MPs) and its acute and chronic ecotoxicity considering relevant scenarios (up to 200 and 250 mg/kg of sediment, using pristine and/or UV-aged particles), using the fungus Penicillium brevicompactum and the dipteran Chironomus riparius as model organisms, respectively, due to their ecological relevance in freshwater environments. Fourier-transform infrared spectroscopy analysis suggested changes in the fungus's carbohydrate reserves and bio-MP degradation through the appearance of low molecular weight esters throughout a 28 day biodegradation test. In a short-term exposure (48 h), C. riparius larvae exposed to pristine or UV-aged bio-MPs had up to 2 particles in their gut. Exposure to pristine bio-MPs decreased larval aerobic metabolism (<20 %) and increased neurotransmission (>15 %), whereas exposure to UV-aged bio-MPs activated larval aerobic metabolism (>20 %) and increased antioxidant defences (catalase activity by >30 % and glutathione-s-transferase by >20 %) and neurotransmission (>30 %). Longer-term (28-d) exposure to UV-aged bio-MPs did not affect larval survival and growth nor the dipteran's emergence but increased male numbers (>30 %) at higher concentrations. This study suggests that the selected agricultural bio-based mulch film is prone to biodegradation by a naturally occurring fungus. However, there is a potential for endocrine disruption in the case of prolonged exposures to UV-aged microplastics. This study emphasises the importance of further research to elucidate the potential ecological effects of these plastic products, to ensure effective management practices, and to establish new regulations governing their use.

Immunotoxic response of bio-based plastic on early life stage zebrafish (Danio rerio): A safe alternative to petroleum-based plastics?

Bio-based plastics are marketed as environmentally friendly alternatives to petroleum-based plastics, although they require specific composting conditions for degradation, which leads to their accumulation in the environment and potential risks to aquatic organisms. We hypothesized that the accumulation of bio-based plastics may induce immunotoxic responses in fish. Our research focused on the accumulation and immunotoxicity of 80 nm polylactic acid (PLA) and polystyrene (PS) (0.1-10 mg/L) on early life stage zebrafish (Danio rerio) exposed for 7 days. Compared to PS, there was a higher accumulation of PLA in larvae. Exposure to PLA resulted in a significant increase in neutrophils and macrophages, while immune protein levels such as Complement 3 (C3), Immunoglobulin M (IgM), and C-reactive protein (CRP) were significantly reduced. Furthermore, the mRNA expression of pro-inflammatory cytokines, including tnf-α and il-6, were significantly elevated in PLA treatments. Additionally, PLA-exposed zebrafish were more susceptible to infection by Vibrio parahaemolyticus. Interestingly, at the same concentration, exposures to PS did not induce significant changes in macrophages or immune protein levels, C3 and IgM. This suggests that PLA has a greater immunotoxic response relative to PS. Our research findings contradict the popular belief that bio-based plastics are non-toxic and harmless, which may have potential risk to aquatic organisms.

Microplastics in agroecosystems: Soil-plant dynamics and effective remediation approaches.

Increasing microplastic (MP) pollution, primarily from anthropogenic sources such as plastic film mulching, waste degradation, and agricultural practices, has emerged as a pressing global environmental concern. This review examines the direct and indirect effects of MPs on crops, both in isolation and in conjunction with other contaminants, to elucidate their combined toxicological impacts. Organic fertilizers predominantly contain 78.6% blue, 9.5% black, and 8.3% red MPs, while irrigation water in agroecosystems contains 66.2% white, 15.4% blue, and 8.1% black MPs, ranging from 0-1 mm to 4-5 mm in size. We elucidate five pivotal insights: Firstly, soil MPs exhibit affinity towards crop roots, seeds, and vascular systems, impeding water and nutrient uptake. Secondly, MPs induce oxidative stress in crops, disrupting vital metabolic processes. Thirdly, leachates from MPs elicit cytotoxic and genotoxic responses in crops. Fourthly, MPs disrupt soil biotic and abiotic dynamics, influencing water and nutrient availability for crops. Lastly, the cumulative effects of MPs and co-existing contaminants in agricultural soils detrimentally affect crop yield. Thus, we advocate agronomic interventions as practical remedies. These include biochar input, application of growth regulators, substitution of plastic mulch with crop residues, promotion of biological degradation, and encouragement of crop diversification. However, the efficacy of these measures varies based on MP type and dosage. As MP volumes increase, exploring alternative mitigation strategies such as bio-based plastics and environmentally friendly biotechnological solutions is imperative. Recognizing the persistence of plastics, policymakers should enact legislation favoring the mitigation and substitution of non-degradable materials with bio-derived or compostable alternatives. This review demonstrates the urgent need for collective efforts to alleviate MP pollution and emphasizes sustainable interventions for agricultural ecosystems.

Microplastics and biobased polymers to combat plastics waste.

Microplastics (MPs) have become the major global concern due to their adverse effects on the environment, human health, and hygiene. These complex molecules have numerous toxic impacts on human well-being. This review focuses on the methods for chemically quantifying and identifying MPs in real-time samples, as well as the detrimental effects resulting from exposure to them. Biopolymers offer promising solutions for reducing the environmental impact caused by persistent plastic pollution. The review also examines the significant progress achieved in the preparation and modification of various biobased polymers, including polylactic acid (PLA), poly(ε-caprolactone) (PCL), lignin-based polymers, poly-3-hydroxybutyrate (PHB), and poly(hydroxyalkanoates) (PHA), which hold promise for addressing the challenges associated with unplanned plastic waste disposal.

Effect of Innovative Bio-Based Plastics on Early Growth of Higher Plants.

Plastic particles are widespread in the environment including the terrestrial ecosystems. They may change the physicochemical properties of soil and subsequently affect plant growth. In recent decades, traditional, petroleum-derived plastics have been increasingly replaced by more environmentally friendly bio-based plastics. Due to the growing role of bio-based plastics it is necessary to thoroughly study their impact on the biotic part of ecosystems. This work aimed for the assessment of the effect of five innovative bio-based plastics of different chemical composition and application on the early growth of higher plants (sorghum, cress and mustard). Each bio-based plastic was tested individually. It was found that the early stages of growth of monocotyledonous plants were usually not affected by any of plastic materials studied. At the same time, the presence of some kinds of bio-based plastics contributed to the inhibition of root growth and stimulation of shoot growth of dicotyledonous plants. Two PLA-based plastics inhibited root growth of dicotyledonous plants more strongly than other plastic materials; however, the reduction of root length did not exceed 22% compared to the control runs. PBS-based plastic contributed to the stimulation of shoot growth of higher plants (sorghum, cress and mustard) at the concentrations from 0.02 to 0.095% w/w. In the case of cress shoots exposed to this plastic the hormetic effect was observed. Lepidium sativum turned out to be the most sensitive plant to the presence of bio-based plastic particles in the soil. Thus, it should be included in the assessment of the effect of bio-based plastics on plant growth.

[Synthesis, biodegradation and waste disposal of polylactic acid plastics: a review].

With the escalation of plastic bans and restrictions, bio-based plastics, represented by polylactic acid (PLA), have become a major alternative to traditional plastics in the current market and are unanimously regarded as having potential for development. However, there are still several misconceptions about bio-based plastics, whose complete degradation requires specific composting conditions. Bio-based plastics might be slow to degrade when it is released into the natural environment. They might also be harmful to humans, biodiversity and ecosystem function as traditional petroleum-based plastics do. In recent years, with the increasing production capacity and market size of PLA plastics in China, there is an urgent need to investigate and further strengthen the management of the life cycle of PLA and other bio-based plastics. In particular, the in-situ biodegradability and recycling of hard-to-recycle bio-based plastics in the ecological environment should be focused. This review introduces the characteristics, synthesis and commercialization of PLA plastics, summarizes the current research progress of microbial and enzymatic degradation of PLA plastics, and discusses their biodegradation mechanisms. Moreover, two bio-disposal methods against PLA plastic waste, including microbial in-situ treatment and enzymatic closed-loop recycling, are proposed. At last, the prospects and trends for the development of PLA plastics are presented.

Effect of bio-based microplastics on earthworms Eisenia andrei.

The contribution of bio-based plastics in the global market is gradually growing and diversifying. Therefore, it is necessary to assess their environmental impact including the biotic parts of ecosystems. Earthworms are regarded as functionally essential and useful bioindicators of ecological disturbances in the terrestrial ecosystems. The purpose of this study was to evaluate the impact of three innovative bio-based plastics on earthworms Eisenia andrei in the long-term experiments. It comprised the mortality, body mass and reproduction ability of earthworms as well as the oxidative stress response. Regarding the latter the activities of catalase (CAT) and superoxide dismutase (SOD) involved in the antioxidant system of earthworms were determined. Two out of three bio-based materials tested were polylactic acid-based (PLA-based) plastics, while one was poly(hydroxybutyrate-co-valerate)-based (PHBV-based) plastic. Neither mortality nor weight of adult earthworms was affected even at high concentration of the bio-based plastics up to 12.5 % w/w in the soil. Reproduction ability occurred to be more sensitive endpoint than mortality or body mass. At the concentration of 12.5 % w/w each of the studied bio-based plastics contributed to the decrease of the earthworm reproduction at statistically significant level. PLA-based plastics exerted stronger effect on earthworm reproduction ability than PHBV-based plastic did. CAT activity turned out to be a good indicator of the cellular response against oxidative stress induced by bio-based plastics in earthworms. The activity of this enzyme increased in the response to the exposure to the bio-based plastics compared to the level achieved in the control tests. It was from 16 % to about 84 % dependent on the material tested and its concentration in the soil. Finally, the reproduction ability and catalase activity are recommended to be used in the evaluation of the potential impacts of bio-based plastics on earthworms.

Degradation of bio-based film plastics in soil under natural conditions.

The degradation of bio-based plastic materials in field soil under natural conditions was investigated in this study. Three bio-based plastics materials, which contained polylactide (PLA) with polybutylene adipate terephthalate and additives (PLA_1), PLA-based polyester blend with mineral filler (PLA_2), and polybutylene succinate with mineral filler (PBS_1) in the form of the film, were subjected to soil burial biodegradation processes. The experiments were carried out in a climate with an average annual temperature of 9.4 °C, in winter and summer periods for one year. The degradation of the materials was evaluated by macro- and microscopic observations, weight loss, thermogravimetric analysis, and tensile test. Macroscopic observation indicated that changes in the color of film surface were visible for samples PBS_1 after 12 months of degradation. Using microscopic inspection the erosion of surface samples PLA_1 and PBS_1 after 12 months was observed. Mass loss of samples PLA_1 and PLA_2 after one year of degradation were below 0.6 %. Moreover, for PBS_1 sample, mass loss was equal to 4.3 %. Based on the obtained results of the mass loss, a description of the degradation kinetics was proposed, showing the changes in the thickness of the tested polymer over time. The thermal stability of the samples PLA_1 and PLA_2 decreased during the degradation process by 16.1 and 2.6 °C, respectively, and for PBS_1 increased by 1.7 °C. Tensile strength at break after 12 months of degradation decreased for sample PLA_1 and PLA_2 by 27.3 and 5.8 %, respectively, and increased for sample PBS_1 by 28.2 % compare to unexposed sample.

Opportunities and Challenges of Establishing a Regional Bio-based Polylactic Acid Supply Chain.

Polylactic acid (PLA) is the bioplastic with the highest market share. However, it is mainly produced from first-generation feedstock and there are various inconsistencies in the literature in terms of its production and recycling processes, carbon footprint, and prices. The aim of this study is to compile and contrast these aspects and investigate second-generation PLA production from technical, economic, and ecological perspectives simultaneously. The comprehensive analyses also show the chances and challenges of originating a PLA supply chain in a specific region. Herein, the German Federal State of North Rhine-Westphalia (NRW) has been chosen as a region of interest. In addition to highlighting the industrial capabilities and synergies, the study quantifies and illustrates the locations of different suitable second-generation feedstocks in the region. However, the identified potentials can be challenged by various obstacles such as the high demand of bioresources, feedstock quality, spatial aspects, and logistics. Furthermore, the substantial price gap between PLA and fossil-based plastics can also discourage the investors to include PLA on their portfolios. Thus, the study also provides recommendations to overcome these obstacles and promote the regional value chains of bioplastics which may serve as prototype for other regions.

Plastics in the environment as potential threat to life: an overview.

Plastics have become inevitable for human beings in their daily life. Million tons of plastic waste is entering in oceans, soil, freshwater, and sediments. Invasion of plastics in different ecosystems is causing severe problems to inhabitants. Wild animals such as seabirds, fishes, crustaceans, and other invertebrates are mostly effected by plastic entanglements and organic pollutants absorbed and carried by plastics/microplastics. Plastics can also be potentially harmful to human beings and other mammals. Keeping in view the possible harms of plastics, some mitigation strategies must be adopted which may include the use of bioplastics and some natural polymers such as squid-ring teeth protein. This review focuses on the possible sources of intrusion and fate of plastics in different ecosystems, their potential deleterious effects on wildlife, and the measures that can be taken to minimize and avoid the plastic use.

Application of a small scale-terrestrial model ecosystem (STME) for assessment of ecotoxicity of bio-based plastics.

In this work a small-scale terrestrial model ecosystem (STME) filled with 4 kg of soil mimicking the natural ecosystem was constructed, and then successfully applied to evaluate the effect of bio-based plastics on soil biota at the community level. It was inhabited by higher plants monocotyledonous (Sorghum saccharatum) and dicotyledonous (Lepidium sativum), and earthworms (Eisenia andrei). Two innovative bioplastics based on polylactic acid (PLA) were tested. This work is one of the first studies, in which potential impacts of bioplastic particles on soil organisms were determined at the community level. Owing to the application of the STME the ecotoxicity data for plants and earthworms were simultaneously collected and the mutual interactions might be taken into account. PLA-based plastics studied did not affect the percentage of seed germination of higher plants that was on average not lower than 88.9%. Neither the length nor fresh mass of shoots of cress were affected. One out of two PLA-based plastics (BPE-RP-PLA) inhibited sorghum growth so that it was statistically significant. PLA-based plastics did not cause to the mortality of earthworms as all ten organisms introduced to each STME survived each experiment. However, the presence of PLA-based plastic particles influenced the depth distribution of earthworms in the STMEs. Most of earthworms (60-70%) exposed to PLA-based plastics migrated downwards to the bottom soil zone, while 80% of the earthworms not exposed to PLA-based plastics lived in the top soil zone of the STME. This avoidance behaviour of earthworms known earlier for other contaminants (e.g. metals, pesticides) was for the first time reported with regard to bioplastic particles present in soil. It is a dangerous phenomenon not only for earthworms but also for the functioning and structure of terrestrial ecosystems. The STME proved to be an appropriate tool to detect it.

Diet preference of zebrafish (Danio rerio) for bio-based polylactic acid microplastics and induced intestinal damage and microbiota dysbiosis.

The ingestion of petroleum-based microplastics (MPs) by aquatic animals and their toxicological effects are of wide concern. However, the ecological risks of bio-based MPs to aquatic animals remain largely unknown. In the present study, zebrafish (Danio rerio) were exposed to MPs of polylactic acid (PLA), the most widely used bio-based plastic, and polyethylene terephthalate (PET), a high-production volume petroleum-based plastic. PLA MPs were more actively ingested by fish than PET MPs. The abundance of PLA MPs in fish intestines was approximately 170 times greater than that of PET MPs after one day of exposure. The ingestion of PLA MPs caused gastrointestinal damage in zebrafish. In addition, the ingestion of PLA MPs induced specific changes in the diversity of intestinal microbiota and promoted species closely linked with energy metabolism, cellular processes, and fish diseases. This might have been related to the depolymerization of PLA in the digestive tract, which decreased the intestinal pH and changed the carbon source structure. Overall, bio-based MPs may have different ecological effects on aquatic animals than traditional petroleum-based MPs.

Phytotoxicity assessment of biodegradable and non-biodegradable plastics using seed germination and early growth tests.

Global production of plastics remains at the high level despite the SARS-Cov-2 pandemic. These are primarily petroleum-derived plastics but the contribution of bio-based plastics estimated at the level of 1% in the plastic market in 2019 is expected to be increasing. Simultaneously, the significant part of plastic waste is still disposed improperly and pollutes the environment making a threat to all living organisms. In this work three plastic materials, two bio-based biodegradable: polylactide (PLA) and polyhydroxybutyrate (PHB), and one petroleum-derived non-biodegradable polypropylene (PP) were studied towards their effects on seed germination and early growth of higher plants. The following plants were used as bioindicators: monocotyledonous plant - Sorghum saccharatum and two dicotyledonous plants: Sinapsis alba and Lepidium sativum. Plastics did not affect seed germination of higher plants even at the highest concentration tested (11.9% w/w) but their presence in soil acted in various ways on growth of the plants. Either no or inhibitive or stimulation effects on growth of roots or stems were noticed. It depended on the concentration and chemical composition of the plastic tested, and plant species. PHB and PLA more often caused to the inhibition of root growth than PP did. This phenomenon was observed in particular with regard to the dicotyledonous plants. Moreover, in the tests with the dicotyledonous plants (S. alba and L. sativum) the dose-response relations were usually determined as statistically relevant. Among these plants cress (L. sativum) occurred to be more sensitive and allowed for obtaining the dose-response dependence for both root and stem length, and, what is important, it took place in the case of each of materials tested. Therefore, cress is recommended to be used as a bioindicator in the assessment of the effect of plastics (petroleum-derived and bio-based plastics) on the early stages of growth of higher plants.

Bioconversion of lignin-derived aromatics into the building block pyridine 2,4-dicarboxylic acid by engineering recombinant Pseudomonas putida strains.

2,4 pyridine dicarboxylic acid (2,4 PDCA) is an analogue of terephthalate, and hence a target chemical in the field of bio-based plastics. Here, Pseudomonas putida KT2440 strains were engineered to efficiently drive the metabolism of lignin-derived monoaromatics towards 2,4 PDCA in a resting cells-based bioprocess that alleviates growth-coupled limitations and allows biocatalysts recycling. Native ß-ketoadipate pathway was blocked by replacing protocatechuate 3,4-dioxygenase by the exogenous LigAB extradiol dioxygenase. Overexpression of pcaK encoding a transporter increased 8-fold 2,4 PDCA productivity from protocatechuate, reaching the highest value reported so far (0.58 g L-1h-1). Overexpression of the 4-hydroxybenzoate monooxygenase (pobA) speed up drastically the production of 2,4 PDCA from 4-hydroxybenzoate (0.056 g L-1h-1) or p-coumarate (0.012 g L-1h-1) achieving values 15-fold higher than those reported with Rhodococcus jostii biocatalysts. 2,4 PDCA was also bioproduced by using soda lignin as feedstock, paving the way for future polymeric lignin valorization approaches.

Poly(lactic acid)/thermoplastic cassava starch blends filled with duckweed biomass.

Duckweed (DW) is a highly small, free-floating aquatic plant. It grows and reproduces rapidly, comprises mainly protein and carbohydrate, and has substantial potential as a feedstock to produce bioplastics due to its renewability and having very little impact on the food chain. The aim of this work was to analyze the effect of DW biomass on the characteristics and properties of bio-based and biodegradable plastics based on a poly(lactic acid)/thermoplastic cassava starch (PLA/TPS) blend. Various amounts of DW biomass were compounded with PLA and TPS in a twin-screw extruder and then converted into dumbbell-shaped specimens using an injection molding machine. The obtained PLA/TPS blends filled with DW biomass exhibited a lower melt flow ability, higher moisture content, and increased surface hydrophilicity than the neat PLA/TPS blend. Incorporation of DW with low concentrations of 2.3 and 4.6 wt% increased the tensile strength, Young's modulus, and hardness of the PLA/TPS blend. Moisture and glycerol from DW and TPS played important roles in reducing the Tg, Tcc, Tm, and Td of PLA in the blends. The current work demonstrated that DW could be used as a biofiller for PLA/TPS blends, and the resulting PLA/TPS blends filled with DW biomass have potential in manufacturing injection-molded articles for sustainable, biodegradable, and short-term use.

Renewable polymers and plastics: Performance beyond the green.

Renewable bio-based polymers are one of the effective answers that the bioeconomy offers to solve the environmental emergency connected to plastics and more specifically fossil-based plastics. Previous studies have shown that more than 70 % of the natural capital cost associated with plastic derives from the extraction and processing of fossil raw materials and that the price of fossil plastic would be on average 44 % higher if such impact was fully paid by businesses. The disclosure of the hidden costs of plastics will contribute to dispelling the myth of the expensiveness of renewable polymers. Nevertheless, the adoption of bio-based plastics in the market must be motivated by their functional properties and not merely by their green credentials. This article highlights some successful examples of synergies between chemistry and biotechnology in achieving a new generation of bio-based monomers and polymers. Their success is justified by the combination of scientific advances with positive environmental and social fallouts.