Buccolingual inclination of posterior dentition in maxillary impacted canine patients using quadrant analysis - A cone-beam computed tomographic study.

BACKGROUND: To examine the buccolingual inclination of maxillary posterior teeth, curve of Wilson, and transversal dimensions in palatally impacted maxillary canine patients, compared to controls by cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Pre-treatment images of 22 bilateral, 32 unilateral impacted maxillary canine patients and 30 controls were included. All patients had palatally impacted canines, with no posterior cross-bite. Data were reclassified in quadrants according to the presence of impaction, as the impaction quadrant (right and left quadrants of 22 bilateral impacted cases, and quadrants presenting impaction of 32 unilateral cases, n = 76), unaffected quadrant (quadrant without impaction in 32 unilateral cases, n = 32) and the control quadrant (right and left quadrants of 30 controls, n = 60) to evaluate the buccolingual inclination angle, transversal width, and arch perimeter. Additionally, comparisons were made regarding curve of Wilson and total arch perimeter among bilateral and unilateral impaction groups with the control group. Statistical analysis was performed by one-way ANOVA and Kruskal Wallis tests. Tukey or Dunn tests were used for comparisons between groups in pairs. RESULTS: No significant difference was found for the buccolingual inclination of maxillary posterior teeth and curve of Wilson among groups. The buccolingual inclination of canines in the impaction quadrant was significantly lower than the other quadrants (p < 0.001). Basal bone width at the level of second premolars, and alveolar width at both premolars were significantly narrower in the impaction quadrant than in the unaffected quadrant (p < 0.05). Dental arch width at the level of first premolar was significantly decreased in the impaction quadrant compared to other quadrants (p < 0.05). Arch perimeter was significantly reduced in the impaction quadrant than in the unaffected quadrant (p < 0.05). CONCLUSION: The presence of bilateral or unilateral palatally impacted maxillary canines did not effect the buccolingual inclination of posterior teeth, and curve of Wilson. Transverse discrepancy was evident in the impaction quadrant even in the absence of posterior cross-bite. Quadrant analysis was particularly useful in evaluating asymmetry for basal bone and alveolar bone widths in the premolar region in patients with unilateral palatally impacted maxillary canine patients.

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification.

INTRODUCTION: Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification. METHODS: In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05). RESULTS: All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658). CONCLUSION: Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

Clinical and molecular heterogeneity of syndromic hypothalamic hamartoma.

Two children are presented who have a distinct syndrome of multiple buccolingual frenula, a stiff and short fifth finger with small nails, a hypothalamic hamartoma, mild to moderate neurological impairment, and mild endocrinological symptoms. No variant assessed to be pathogenic or likely pathogenic was detected in the GLI3 gene in either child. This syndrome appears to be distinct from the inherited Pallister-Hall syndrome associated with GLI3 variants, which is characterized by hypothalamic hamartoma, mesoaxial polydactyly, and other anomalies. In the individuals described here, manifestations outside of the central nervous system were milder and the mesoaxial polydactyly, which is common in individuals with Pallister-Hall syndrome, was absent. Instead, these children had multiple buccolingual frenula together with the unusual appearance of the fifth digit. It remains unclear whether these two individuals represent a separate nosologic entity or if they represent a milder manifestation of one of the more severe syndromes associated with a hypothalamic hamartoma.

Three-dimensional relationship between the degree of bilateral impacted mandibular third molars angulation and the mandibular dental arch parameters: a cross-sectional comparative study.

OBJECTIVE: The purpose of this study was to three-dimensionally evaluate the relationship between the degree of bilateral impacted mandibular third molar (IM3M) angulation and the mandibular dental arch parameters in normal skeletal and dental malocclusion patients. MATERIALS AND METHODS: In this retrospective cross-sectional comparative study, 120 adult subjects' cone-beam computed tomography (CBCT) images were three-dimensionally analyzed. The sample included 120 adults aged 20-30 years, with a gender distribution of 51 male and 69 female participants. The sample was divided into 100 adults with bilateral IM3M (study group) and 20 adults with normal bilateral erupted M3M (control group). The study group was sub-divided into three groups according to the degree of IM3M buccolingual angulation (BL°): group A, < 12° on the center of the ridge (N = 30), group B, 12-24° off-center of the ridge (N = 40), group C, > 24° off-center of the ridge (N = 30). The study group was also sub-divided into two groups according to IM3M mesiodistal angulation (MD°): group 1 from 10 to 45° (N = 36), group 2 > 45° (N = 64). Comparison within and between groups was performed using one-way ANOVA followed by Tukey's post hoc test. The correlation between IM3M, BL, and MD angulation and the mandibular arch parameter was calculated using Pearson's correlation coefficient. RESULTS: Statistically significant differences (P < 0.001) were found between the IM3M BL° and anterior teeth inclination, arch length (AL), and inter-second molar width (inter 2nd MW) as well as between the IM3M MD° with anterior crowding and the arch length (P < 0.001). A significant positive correlation was found between IM3M BL° and anterior teeth inclination and between IM3M MD° and anterior teeth crowding and inter 2nd MW. A significant negative correlation was observed between IM3M BL° and inter 1st MW and 2nd MW. CONCLUSION: The degree of buccolingual and mesiodistal angulation of the impacted mandibular third molars was related with mandibular dentoalveolar changes. Increased buccolingual angulation is generally associated with increased anterior teeth inclination and decreased 1st and 2nd inter-molar width. The increase in mesiodistal angulations was generally related with increased anterior teeth crowding and 2nd inter-molar width. CLINICAL RELEVANCE: Assessment of the relationship between the impacted mandibular third molars and the degree of arch discrepancy, and the position of mandibular incisors in the three planes of space might help in the decision-making process for the extraction of the impacted third molars in adult patients.

Evaluation of safe areas for miniscrew use according to various skeletal anomalies with CBCT.

OBJECTIVES: We aimed to determine safe areas to apply miniscrews in the interradicular region of the maxilla and mandible in individuals with various sagittal skeletal malocclusions. MATERIALS AND METHODS: Cone beam-computed tomography images of 159 individuals were used. Individuals were divided into three groups: Class I, Class II, and Class III. In the sagittal plane, 3-6-9-mm apical sections were determined from the alveolar crest apex. The buccal cortical bone thickness, interradicular distance, and buccolingual bone distances were measured. RESULTS: In the buccal cortical bone thickness, we observed statistically significant differences between the classes except for the 1-1 region in the maxilla and all regions and sections in the mandible (p < 0.05). The differences in the buccolingual bone distance between classes were statistically significant, except for the 3-mm and 6-mm sections in the 3-4 and 4-5 regions of the maxilla, the 9-mm sections in the 1-2 and 2-3 regions, the 6-mm and 9-mm sections in the 3-4 region, and the 6-mm section in the 4-5 regions of the mandible (p < 0.05). The differences in the interradicular bone distance were statistically significant between the classes in all regions and sections of the mandible except the 6-mm sections in the 1-2 region and in all sections of the maxilla except the 6-mm sections in the 3-4 region (p < 0.05). CONCLUSIONS: We observed significant differences in the buccal cortical bone thickness, interradicular bone distance, and buccolingual bone distance among individuals. CLINICAL RELEVANCE: Understanding the anatomy of interradicular regions and preventing complications.

Factors affecting the maxillary and mandibular incisors' buccolingual inclinations and buccal and lingual cortical plate heights.

INTRODUCTION: Orthodontics is closely related to periodontics. The buccolingual inclination (BLI) of the incisors and deficiencies in their buccal (BHd) and lingual (LHd) cortical plate heights may affect orthodontic outcomes. Identifying risk factors that can compromise buccal or lingual bone heights may have clinical value. The literature on BLI/BHd/LHd is not only scarce but also limited to one jaw. We aimed to examine, for the first time, factors affecting BLI/BHd/LHd not evaluated before as well as other factors with scarce literature about them. METHODS: In this two-phase epidemiological and analytical study, inclinations and cortical heights of 248 incisors (bilateral centrals and laterals) were evaluated blindly on 62 randomly selected high-resolution pretreatment cone-beam computed tomography volumes (30 maxillae [13 men, 17 women], 32 mandibles [13 men, 19 women]). The sample was balanced in terms of sexes, jaws, and ages. The BLI/BHd/LHd of bilateral incisors were measured (intraobserver agreement > 95%). The effects of jaws, sexes, age, sides, and incisor types on each of the anatomical variables (BLI/BHd/LHd) were analyzed using a Mixed-Model Multiple Linear Regression analysis. Correlations among continuous variables were assessed using a Pearson coefficient (α = 0.05). RESULTS: For the maxillary centrals, BLI, BHd, and LHd were 106.79 ± 5.06, 1.94 ± 0.95, and 1.50 ± 0.76, respectively. These parameters were '110.56 ± 5.97, 1.81 ± 0.83, 1.23 ± 0.69' for the maxillary laterals; '97.64 ± 8.26, 2.98 ± 1.48, 3.46 ± 1.45' for the mandibular centrals; and '95.98 ± 6.80, 3.29 ± 1.72, and 2.73 ± 1.15' for the mandibular laterals. BLI was greater in the maxilla compared to the mandible and in the lateral incisors compared to centrals (P < 0.05). BHd was greater (more deficient) in the mandible (P = 0.000). Age, sex, or side were not associated with BLI (P > 0.05). Age, sex, side, or incisor types were not associated with BHd (P > 0.05). LHd was greater in the mandible, older individuals, and centrals (P < 0.05). There were some significant but weak correlations between BLI with BHd and especially LHd (P < 0.05). CONCLUSION: In the maxilla, but not in the mandible, incisors' BLI may determine LHd. Maxillary incisors may have greater BLIs as well as greater buccal and lingual alveolar bone heights compared to mandibular incisors. BLI might be greater in the laterals compared to the centrals in both jaws combined.

Identifying cortical plate inclination as a parameter to re-assess transverse discrepancies in untreated adults with different vertical facial heights-A retrospective CBCT study.

OBJECTIVE: To determine the inclination angles of buccal, palatal cortical plates and assess its harmony with existing molar buccolingual inclination in adults with different vertical facial heights. The aim of this study was to identify the role of cortical plate inclination as a diagnostic tool for determining alveolar support in adults with transverse discrepancies. MATERIALS AND METHODS: One-hundred and fifty seven CBCTs (50-Hypo-divergent, 51-Normo-divergent and 56-Hyper-divergent growth patterns) of untreated adults were utilized. Cross-sectional slices with respect to the maxillary first molar were taken as orientation landmarks in defined reference planes. Inclination angles for the first molar, buccal and palatal cortical plate were determined with respect to the palatal plane. ANOVA and Post Hoc Tukey's HSD test were carried out to determine significant differences between groups. RESULTS: Molar inclination was significantly greater in hyper-divergent groups compared to normo-divergent and hypo-divergent groups (P < .05). Greater variation between molar inclination and cortical plate inclination (buccal and palatal) was seen in hyper-divergent groups (P < .05). Hypo-divergent and normo-divergent groups showed almost similar molar and cortical plate inclinations; however, there was a significant difference between the buccal and palatal cortical plates (P < .05). CONCLUSIONS: Cortical plate inclination is in agreement with molar inclination in hypo- and normo-divergent groups when compared to hyper-divergent groups. In adults with decreased/normal facial heights, greater balance and harmony is observed between the dental and alveolar substructures in the posterior region. In adults with increased facial heights, a greater amount of dentoalveolar compensation is seen with respect to the molar and its surrounding bone support.

Transverse differences between cleft lip and palate and non-cleft palate with skeletal Class III malocclusion using buccolingual inclination: a cone-beam computed tomography retrospective study.

BACKGROUND: The purpose of this study was to evaluate the differences between buccolingual inclination (BI) of maxillary posterior teeth in patients with cleft lip and palate (CLP) and non-cleft palate with skeletal Class III malocclusion. We propose a method of maxillary expansion which is more suitable for patients with CLP. METHODS: For this retrospective study, 40 patients with CLP and 21 patients with skeletal Class III malocclusion were selected. The CLP group was divided into the unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) groups. The BI of the maxillary first premolar (BI4), maxillary second premolar (BI5) and first molar (BI6) were measured using cone-beam computed tomography, and the differences between them were compared and analyzed by Student's t-test. RESULTS: There were significant differences between cleft side BI4 and non-cleft side BI4 in the UCLP group, BI5 in the BCLP group, BI4 and BI5 in all CLP groups and the skeletal Class III malocclusion group. BI6 was similar across all three groups. CONCLUSIONS: The premolars of patients with CLP do not exhibit the same regularity as those with Class III malocclusion; this may be related to surgical scarring of the cleft palate. Greater attention should be paid to the correction of BI in the maxillary expansion of patients with CLP.

Can palatal depth influence the buccolingual inclination of molars? A cone beam computed tomography-based retrospective evaluation.

OBJECTIVE: To interpret a correlation between buccolingual inclination of molars and palatal depth in hyperdivergent patients and to identify importance of determining inclination of molars in assessing transverse discrepancies (as skeletal or dental). DESIGN: This was a retrospective cone beam computed tomography (CBCT) study. SETTING: The study was conducted in the Department of Orthodontics, Saveetha Dental College and Hospital, Tamil Nadu, India. METHODS: This was a retrospective CBCT study of 79 patients who underwent diagnostic CBCT for treatment purposes. The CBCT scans were evaluated systematically and the required parameters were accessed with suitable reference planes. Student's t-test (95% confidence interval) was performed to determine buccolingual inclination of first molars between the right and left sides. Only patients with a vertical growth pattern and skeletal class I relation were included and they were classified into three groups based on their palate depth. RESULTS: In patients with palatal depth > 22 mm, the mean inclination of molars was 7.4°; with palatal depth in the range of 19-22 mm, the mean inclination of molars was 5.23°; and with palatal depth < 19 mm, the mean inclination of molars was 2.9°. Results showed that there was a significant correlation between the buccolingual inclination of molars and the palate depth in vertical growers (P < 0.05). CONCLUSION: The buccolingual inclination of first molars is increased in patients with greater palatal depth. This parameter is helpful in classifying crossbites as skeletal or dental. The amount of compensation required to correct the cross bite can be adjusted using Korkhaus Index.

Relationship between CBCT and panoramic images of the morphology and angulation of the posterior mandibular jaw bone.

PURPOSE: We determined actual bucco-lingual angulation values and morphological variations of residual bone in the mandibular posterior edentulous region using cone-beam computed tomography (CBCT) and panoramic radiography. A second aim was to investigate whether it was possible to predict bone morphology from panoramic radiographs. METHODS: Data were collected from 77 consecutive patients referred for both CBCT and panoramic radiography in our department. Two-dimensional and three-dimensional images of the probable implant placement region were investigated. The bucco-lingual angulation values and crest type were determined directly from the cross-sectional images of the posterior edentulous region. The edentulous region was divided into three groups: second premolar, first molar, or second molar region. The observations were evaluated by the computer software, SPSS 22.0 (SPSS Inc. Chicago, USA). The crest type was classified into three groups: type U, type C, or type P. Kappa statistics, Kolmogorov-Smirnov tests, ANOVA, and Kruskal-Wallis tests were used in statistical analyses. The significance level was set at p < 0.05. RESULTS: Type C was more frequent in the second premolar region and the crest type had changed to type U in the second molar region. The predictability of the type U was highest in the second molar region. Moderate agreement was found in the predictability of type U in the molars (κ = 0.602). The mean value of bucco-lingual angulation was highest in the second molar region, followed by the first molar region. There were statistically significant differences between the bucco-lingual angulation of the crest types in the second premolar and first molar regions (p < 0.05). CONCLUSIONS: Bucco-lingual angulation values and morphology change through the posterior mandible. Type U was predicted at a higher rate in the second molar region from panoramic radiographs. These results demonstrate predicting high-risk areas in the posterior mandible for implant therapy from panoramic radiography.

Effect of orthodontic treatment with preadjusted edgewise appliances on the buccolingual inclination of mandibular canines: a CBCT study.

OBJECTIVES: To assess the effects of treatment with preadjusted edgewise appliances on the buccolingual inclination of mandibular canines and the intercanine distance. SETTING AND SAMPLE POPULATION: The Division of Orthodontics at the University of Minnesota. Thirty patients whose treatment included extraction of mandibular first premolars and 30 patients whose treatment did not include extractions. MATERIAL AND METHODS: The buccolingual inclination of mandibular canines and their linear distance were measured on cone beam computed tomograms before and after treatment in both patient groups. Differences between extraction and non-extraction groups and between pre- and post-treatment measurements were tested for statistical significance, and the correlation between the buccolingual inclination and the intercanine distance was computed. RESULTS: Post-treatment, the buccolingual inclination of mandibular canines was significantly greater in the non-extraction group than in the extraction group. In both groups, the canines became more lingually inclined with treatment (non-extraction group: -2.1°; extraction group: -4.1°). The intercanine distance increased significantly in the extraction group (+1.2 mm) but not in the non-extraction group (-0.5 mm). While there was a significant positive correlation between the buccolingual inclination and the mandibular intercanine distance in both groups before treatment, after treatment this correlation was significant only in the non-extraction group. CONCLUSION: Orthodontic treatment with preadjusted edgewise appliances results in more lingually inclined mandibular canines together with an increased intercanine distance, especially in patients whose treatment involves the extraction of mandibular first premolars.

Relationship of buccolingual inclination between the alveolar bone and first molar in different vertical facial types: A CBCT study.

BACKGROUND: This study aimed to investigate the differences in the buccolingual inclination and transverse width of maxillary and mandibular first molars among different vertical facial types. METHODS: In all, 78 samples were divided into three groups based on the GoGn-SN angle: the low-angle group (n = 26, mean age=24.21±5.11), average-angle group (n = 26, mean age=22.66±3.72), and high-angle group (n = 26, mean age=22.23±2.43). Cone beam computed tomography (CBCT) measurements were used to assess the buccolingual inclination of the axis of the maxillary and mandibular first molars, as well as the buccolingual inclination of the alveolar bone, the dental arch width, and the basal bone width. One-way ANOVA, the LSD test, and Pearson correlation analysis were performed. RESULTS: The high-angle group showed significantly greater lingual inclination of the maxillary alveolar bone than the low-angle group and average-angle group (p < 0.001; p < 0.05). The difference in buccolingual inclination of the axis of the maxillary first molar and the alveolar bone was significantly greater in the high-angle group than in the low-angle group (p < 0.05). Both the maxillary and mandibular dental arch were significantly narrower in the high-angle group than in the other two groups. The mandibular basal bone was also significantly narrower in the high-angle group than in the low-angle group and average-angle group (p < 0.001; p < 0.01). CONCLUSIONS: The alveolar bone of maxillary first molar in the high-angle group was more palatal inclined than that the low-angle group and the average-angle group, which suggests that orthodontists should pay more attention to the root-bone relationship in the high-angle group during expansion treatment to prevent bone fenestration and dehiscense.

Enhancing Anterior Esthetic Zone Implant Placement Through Bone Manipulation Techniques: A Case Series.

Replacement of missing teeth using dental implants has become the most frequently performed procedure. Following tooth loss, buccolingual bone width decreases significantly compromising the successful placement of dental implants. Various treatment modalities have been advocated in scenarios with insufficient buccolingual bone width like narrow diameter implant placement, horizontal guided bone regeneration, ridge splitting technique, and osseodensification. Maxillary anterior tooth loss is of prime esthetic concern, which needs immediate attention. Guided bone regeneration is the gold standard for patients presenting for rehabilitation in the anterior maxilla with inadequate buccolingual bone width. However, bone grafting techniques require longer treatment time; hence, various other techniques like lateral bone expansion, osseodensification, or socket shield technique are sought. This case series presents successful rehabilitation of the maxillary anterior esthetic zone with dental implants using various bone manipulation techniques, including lateral bone condensation, socket shield technique, and osseodensification.

Estimation of Sex From the Buccolingual Dimension of Tooth Among the North Indian Population.

INTRODUCTION: Identification is an important aspect of forensic medicine. Identification plays an imperative role, especially in highly decomposed bodies, mutilated bodies, and undisclosed and fragmentary human remains. The estimation of sex is an essential parameter of human identification. In forensic anthropometry, sex determination is related to morphometric characteristics of skeletal bones, such as the skull and mandible, clavicle, sternum, scapula, humerus, pelvic bone, sternum, and femur. Since teeth are decay-resistant, conscientious analysis of teeth can accredit reliable sex estimation of an individual, especially when other determinants are fragmented or destroyed. AIM: The aim of the study was to explore the association between sex and buccolingual crown dimensions of teeth. MATERIALS AND METHODS: The study sample consists of 100 volunteer subjects (50 male subjects and 50 female subjects) aged between 20 and 35 years. Alginate was used to take impressions of the teeth and the cast was prepared using pouring by dental stone. Measurements of buccolingual parameters of all the teeth (except the third molars) of both jaws were done on dental casts by using a digital caliper. RESULTS: Collected data were analyzed using SPSS software (IBM Corp., Armonk, NY) and were outlined as mean and standard deviation (SD). The male and female groups were compared using an independent Student's t-test or unpaired test. The results of this study revealed that 16 out of 28 odontometric parameters (except third molar) of the two groups (male and female) were higher in the male group as compared to the female group (p < 0.05). CONCLUSION: Buccolingual odontometric parameters can be used for sex estimation in the North Indian population.

Prosthetic Rehabilitation of Narrow Mandibular Ridge by Two-Stage Split Technique: A Case Report.

Subsequent to dental extraction, residual ridge resorption manifests as an inherent biological process unfolding over an approximate duration of one year. This intrinsic phenomenon entails a substantial diminution, occasionally reaching 50%, in the initial bucco-lingual dimensions of the mandibular bone. To address this issue, a dental procedure known as the two-stage ridge split intervention is employed. This process involves two distinct stages: ridge splitting and extension. In the first stage, the dentist splits the alveolar crest to create a widening gap. This allows for the subsequent placement of dental implants. The splitting process is carefully executed to ensure that there's enough space for the implants to be securely embedded, and in the second stage, the widened gap generated through the split and extension of the alveolar crest is replenished with a suitable material. Two common options are hydroxyapatite, a synthetic bone-like substance that promotes bone regeneration, or autogenous bone grafts, which are harvested from the patient's bone, often from another site within the mouth. Following this two-stage procedure, the next step is to place dental implants. However, there's typically a waiting period of eight to 12 weeks. This interval allows for proper healing and integration of the grafted or filled material with the existing bone before the implants are installed. In this case report, a specific patient's experience with the two-stage ridge split procedure in the mandibular region is mentioned. Such case studies are valuable in assessing the success and viability of this dental intervention in narrow mandibular-width cases.

Evaluation of Buccolingual Inclinations of First Molars Among Different Vertical Facial Patterns in Class II Division I Subjects.

Background Knowing the characteristics of vertical patterns is crucial to provide the best orthodontic treatment. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating true buccolingual inclinations. The current study investigates the buccolingual inclination of first molars in adult subjects with different vertical facial patterns. Methods CBCT scans of 66 adult patients (31 males, 35 females) with a mean age of 31.6 years (SD: 6.4 years) exhibiting skeletal class II division I maxillomandibular relationships were employed. Participants were categorized into three groups based on linear and angular measurements: normodivergent group (n=22), hypodivergent group (n=22), and hyperdivergent group (n=22). The independent samples t-test and Mann-Whitney U-test were conducted to investigate statistical differences in terms of buccolingual inclination between the three vertical patterns. Results Statistically significant differences were observed in the buccolingual inclinations of both maxillary and mandibular first molars in the hypodivergent group compared to the other groups (p<0.05). Conclusions In patients with class II division I sagittal relationships, the buccolingual inclinations of the first molars exhibit similarities between normodivergent and hyperdivergent groups. However, these inclinations differ significantly in hypodivergent adult subjects.

Assessment of Cervical Abrasion, Dentin Hypersensitivity, and Its Treatment Needs Using the Cervical Abrasion Index of Treatment Needs Probe.

Objective This study was intended to compare the mean buccolingual measurement of abraded teeth with/without sensitivity. The hypothesis was that the suggested treatment approaches would be in agreement with that of the treatment needs (TN) elicited using the Cervical Abrasion Index of Treatment Needs (CAITN) probe and aid in the development of a prospective CAITN index for clinical/community studies of effective therapeutic measures. Materials and methods  A cross-sectional study was carried out on 30 individuals with a mean age of 48.4±12.54 years, comprising 840 teeth with/without cervical abrasion. The buccolingual measurement of each tooth was recorded using the CAITN probe. The response to air-blast was assessed by a short blast of one-second duration at a distance of 1 cm for each tooth. An endodontist was also asked to indicate the treatment methods used by him for the treatment of abrasions. His opinions regarding the TN were later compared with the data collected by an investigator. Results The mean buccolingual measurements of all the teeth were compared with the dentinal sensitivity using the independent t-test and were statistically highly significant. Furthermore, one-way analysis of variance disclosed that there was a statistically highly significant difference found for all the TN (p<0.01) such as none, preventive, basic, and advanced restorative TN followed by Tukey honestly significant difference post hoc tests for multiple pair-wise comparisons. The running receiver operator characteristic curve discloses the best cut-off value of the buccolingual measurement to predict the various categories of TN of each tooth. As the area under the curve is more close to 1 (noticed in the majority of the teeth in the sample), the model predicts the TN more precisely based on the buccolingual measurements. Conclusion The present study enables a correct diagnosis of cervical abrasions and determines the various TN with the most appropriate restorative material. These baseline data help to design clinical studies that test relevant treatment and diagnostic strategies.

Evaluation of First Molar Buccolingual Angulations and Dental Arch Parameters in Adolescents with Bilateral Posterior Crossbite.

Objective: This study aimed to compare the maxillary and mandibular transverse dental arch widths and buccolingual inclinations of the molar teeth in patients with and without bilateral posterior crossbite (BPC) divided into different age groups. Methods: The study included dental models from 120 patients (age: 12-18 years), including 60 with BPC (32 boys and 28 girls) and 60 without BPC (controls; 30 boys and 30 girls), who were divided into three age groups (12-14, 14-16, and 16-18 years). The centroid and lingual transverse arch widths, dental arch perimeters, dental arch depths, and buccolingual angulation of the molar teeth in the maxillary and mandibular regions were evaluated using scanned three-dimensional dental models. Results: Dental arch parameters and buccolingual molar angulation did not significantly differ between the different age groups in either the patients with BPC or the controls (p>0.05). However, several dental arch width parameters differed significantly between sexes in both groups, with higher values in boys than in girls (p<0.05). The difference in the upper and lower molar buccolingual angulation between patients with BPC and controls was greater at the age of 16-18 years than the age of 12-14 years (p<0.05). Conclusion: Patients with BPC have smaller maxillary dental arch widths and larger mandibular intermolar widths than those without BPC. The difference in the molar buccolingual angulation between them increases with advancing age.

The Cervical Abrasion Index of Treatment Needs (CAITN) Procedure for Population Groups and Individuals.

Because of their complex epidemiology and etiology, cervical abrasions usually manifest with concealing symptoms. The buccolingual dimension of the sore is considered the most important metric to rank the damage and evaluate its long-term prognosis. In this piece, we will break this down and offer the Cervical Abrasion Index of Treatment Needs (CAITN), a simple grouping structure based on the clinical presentation of the sore that may be used to establish a basic, useful, treatment-based order. CAITN is the practical approach to routine screening and recording cervical abrasion lesions. The index provides epidemiologists, public health professionals, and practitioners with a practical means of assessing the treatment needs (TN) of cervical abrasion.

Non-Surgical Transversal Dentoalveolar Compensation with Completely Customized Lingual Appliances versus Surgically Assisted Rapid Palatal Expansion in Adults-Tipping or Translation in Posterior Crossbite Correction?

The aim of this study was to investigate buccolingual tooth movements (tipping/translation) in surgical and nonsurgical posterior crossbite correction. A total of 43 patients (f/m 19/24; mean age 27.6 ± 9.5 years) treated with surgically assisted rapid palatal expansion (SARPE) and 38 patients (f/m 25/13; mean age 30.4 ± 12.9 years) treated with dentoalveolar compensation using completely customized lingual appliances (DC-CCLA) were retrospectively included. Inclination was measured on digital models at canines (C), second premolars (P2), first molars (M1), and second molars (M2) before (T0) and after (T1) crossbite correction. There was no statistically significant difference (p > 0.05) in absolute buccolingual inclination change between both groups, except for the upper C (p < 0.05), which were more tipped in the surgical group. Translation, i.e., bodily tooth movements that cannot be explained by pure uncontrolled tipping, could be observed with SARPE in the maxilla and with DC-CCLA in both jaws. Dentoalveolar transversal compensation with completely customized lingual appliances does not cause greater buccolingual tipping compared to SARPE.