PI(4,5)P2 Clustering and Its Impact on Biological Functions.

Located at the inner leaflet of the plasma membrane (PM), phosphatidyl-inositol 4,5-bisphosphate [PI(4,5)P2] composes only 1-2 mol% of total PM lipids. With its synthesis and turnover both spatially and temporally regulated, PI(4,5)P2 recruits and interacts with hundreds of cellular proteins to support a broad spectrum of cellular functions. Several factors contribute to the versatile and dynamic distribution of PI(4,5)P2 in membranes. Physiological multivalent cations such as Ca2+ and Mg2+ can bridge between PI(4,5)P2 headgroups, forming nanoscopic PI(4,5)P2-cation clusters. The distinct lipid environment surrounding PI(4,5)P2 affects the degree of PI(4,5)P2 clustering. In addition, diverse cellular proteins interacting with PI(4,5)P2 can further regulate PI(4,5)P2 lateral distribution and accessibility. This review summarizes the current understanding of PI(4,5)P2 behavior in both cells and model membranes, with emphasis on both multivalent cation- and protein-induced PI(4,5)P2 clustering. Understanding the nature of spatially separated pools of PI(4,5)P2 is fundamental to cell biology.

Magnesium Flux Modulates Ribosomes to Increase Bacterial Survival.

Bacteria exhibit cell-to-cell variability in their resilience to stress, for example, following antibiotic exposure. Higher resilience is typically ascribed to "dormant" non-growing cellular states. Here, by measuring membrane potential dynamics of Bacillus subtilis cells, we show that actively growing bacteria can cope with ribosome-targeting antibiotics through an alternative mechanism based on ion flux modulation. Specifically, we observed two types of cellular behavior: growth-defective cells exhibited a mathematically predicted transient increase in membrane potential (hyperpolarization), followed by cell death, whereas growing cells lacked hyperpolarization events and showed elevated survival. Using structural perturbations of the ribosome and proteomic analysis, we uncovered that stress resilience arises from magnesium influx, which prevents hyperpolarization. Thus, ion flux modulation provides a distinct mechanism to cope with ribosomal stress. These results suggest new approaches to increase the effectiveness of ribosome-targeting antibiotics and reveal an intriguing connection between ribosomes and the membrane potential, two fundamental properties of cells.

Manipulating polydispersity of lens ß-crystallins using divalent cations demonstrates evidence of calcium regulation.

Crystallins comprise the protein-rich tissue of the eye lens. Of the three most common vertebrate subtypes, ß-crystallins exhibit the widest degree of polydispersity due to their complex multimerization properties in situ. While polydispersity enables precise packing densities across the concentration gradient of the lens for vision, it is unclear why there is such a high degree of structural complexity within the ß-crystallin subtype and what the role of this feature is in the lens. To investigate this, we first characterized ß-crystallin polydispersity and then established a method to dynamically disrupt it in a process that is dependent on isoform composition and the presence of divalent cationic salts (CaCl2 or MgCl2). We used size-exclusion chromatography together with dynamic light scattering and mass spectrometry to show how high concentrations of divalent cations dissociate ß-crystallin oligomers, reduce polydispersity, and shift the overall protein surface charge-properties that can be reversed when salts are removed. While the direct, physiological relevance of these divalent cations in the lens is still under investigation, our results support that specific isoforms of ß-crystallin modulate polydispersity through multiple chemical equilibria and that this native state is disrupted by cation binding. This dynamic process may be essential to facilitating the molecular packing and optical function of the lens.

A Water-in-Salt Electrolyte for Room-Temperature Fluoride-Ion Batteries Based on a Hydrophobic-Hydrophilic Salt.

Realizing room-temperature, efficient, and reversible fluoride-ion redox is critical to commercializing the fluoride-ion battery, a promising post-lithium-ion battery technology. However, this is challenging due to the absence of usable electrolytes, which usually suffer from insufficient ionic conductivity and poor (electro)chemical stability. Herein we report a water-in-salt (WIS) electrolyte based on the tetramethylammonium fluoride salt, an organic salt consisting of hydrophobic cations and hydrophilic anions. The new WIS electrolyte exhibits an electrochemical stability window of 2.47 V (2.08-4.55 V vs Li+/Li) with a room-temperature ionic conductivity of 30.6 mS/cm and a fluoride-ion transference number of 0.479, enabling reversible (de)fluoridation redox of lead and copper fluoride electrodes. The relationship between the salt property, the solvation structure, and the ionic transport behavior is jointly revealed by computational simulations and spectroscopic analysis.

Collagen IV of basement membranes: IV. Adaptive mechanism of collagen IV scaffold assembly in Drosophila.

Collagen IV is an essential structural protein in all metazoans. It provides a scaffold for the assembly of basement membranes, a specialized form of extracellular matrix, which anchors and signals cells and provides microscale tensile strength. Defective scaffolds cause basement membrane destabilization and tissue dysfunction. Scaffolds are composed of α-chains that coassemble into triple-helical protomers of distinct chain compositions, which in turn oligomerize into supramolecular scaffolds. Chloride ions mediate the oligomerization via NC1 trimeric domains, forming an NC1 hexamer at the protomer-protomer interface. The chloride concentration-"chloride pressure"-on the outside of cells is a primordial innovation that drives the assembly and dynamic stabilization of collagen IV scaffolds. However, a Cl-independent mechanism is operative in Ctenophora, Ecdysozoa, and Rotifera, which suggests evolutionary adaptations to environmental or tissue conditions. An understanding of these exceptions, such as the example of Drosophila, could shed light on the fundamentals of how NC1 trimers direct the oligomerization of protomers into scaffolds. Here, we investigated the NC1 assembly of Drosophila. We solved the crystal structure of the NC1 hexamer, determined the chain composition of protomers, and found that Drosophila adapted an evolutionarily unique mechanism of scaffold assembly that requires divalent cations. By studying the Drosophila case we highlighted the mechanistic role of chloride pressure for maintaining functionality of the NC1 domain in humans. Moreover, we discovered that the NC1 trimers encode information for homing protomers to distant tissue locations, providing clues for the development of protein replacement therapy for collagen IV genetic diseases.

Structural and biochemical analysis of the unique interactions of the Campylobacter jejuni CorA channel protein with divalent cations.

CorA is a Mg2+ channel that plays a key role in the homeostasis of intracellular Mg2+ in bacteria and archaea. CorA consists of a cytoplasmic domain and a transmembrane domain and generates a Mg2+ pathway by forming a pentamer in the cell membrane. CorA gating is regulated via negative feedback by Mg2+, which is accommodated by the pentamerization interface of the CorA cytoplasmic domain (CorACD). The Mg2+-binding sites of CorACD differ depending on the species, suggesting that the Mg2+-binding modes and Mg2+-mediated gating mechanisms of CorA vary across prokaryotes. To define the Mg2+-binding mechanism of CorA in the Campylobacter jejuni pathogen, we structurally and biochemically characterized C. jejuni CorACD (cjCorACD). cjCorACD adopts a three-layered α/ß/α structure as observed in other CorA orthologs. Interestingly, cjCorACD exhibited enhanced thermostability in the presence of Ca2+, Ni2+, Zn2+, or Mn2+ in addition to Mg2+, indicating that cjCorACD interacts with diverse divalent cations. This cjCorACD stabilization is mediated by divalent cation accommodation by negatively charged residues located at the bottom of the cjCorACD structure away from the pentamerization interface. Consistently, cjCorACD exists as a monomer irrespective of the presence of divalent cations. We concluded that cjCorACD binds divalent cations in a unique pentamerization-independent manner.

Synergy Between Dynamic Behavior of Hydrogen Defects and Non-Radiative Recombination in Metal-Halide Perovskites.

In organic-inorganic hybrid perovskite solar cells (PSCs), hydrogen defects introduce deep-level trap states, significantly influencing non-radiative recombination processes. Those defects are primarily observed in MA-PSCs rather than FA-PSCs. As a result, MA-PSCs demonstrated a lower efficiency of 23.6% compared to 26.1% of FA-PSCs. In this work, both hydrogen vacancy (VH -) and hydrogen interstitial (Hi -) defects in MAPbI3 bulk and on surfaces, respectively are investigated. i) Bulk VH - defects have dramatic impact on non-radiative recombination, with lifetime varying from 67 to 8 ns, depending on whether deprotonated MA0 are ion-bonded or not. ii) Surface H-defects exhibited an inherent self-healing mechanism through a chemical bond between MA0 and Pb2+, indicating a self-passivation effect. iii) Both VH - and Hi - defects can be mitigated by alkali cation passivation; while large cations are preferable for VH - passivation, given strong binding energy of cation/perovskite, as well as, weak band edge non-adiabatic couplings; and small cations are suited for Hi - passivation, considering the steric hindrance effect. The dual passivation strategy addressed diverse experimental outcomes, particularly in enhancing performance associated with cation selections. The dynamic connection between hydrogen defects and non-radiative recombination is elucidated, providing insights into hydrogen defect passivation essential for high-performance PSCs fabrication.

Rational Design of the Alkali Metal Sn-Based Mixed Halides with Large Birefringence and Wide Transparent Range.

Birefringent materials are widely used in various advanced optical systems, owing to their vital role in creating and controlling polarized light. Currently, Sn2+-based compounds containing stereochemically active lone-pair (SCALP) cations are extensively investigated and considered as one class of promising birefringent materials. To solve the problem of relatively narrow bandgap of Sn2+-based compounds, alkali metals and multiple halogens are introduced to widen the bandgap during the research. Based on this strategy, four new Sn2+-based halides, A2Sn2F5Cl and ASnFCl2 (A = Rb and Cs), with large birefringence, short ultraviolet (UV) cutoff edge, and wide transparent range are successfully found. The birefringences of A2Sn2F5Cl (A = Rb and Cs) are 0.31 and 0.28 at 532 nm, respectively, which are among the largest in Sn-based halide family. Remarkably, A2Sn2F5Cl possess relatively shorter UV cutoff edge (<300 nm) and broad infrared (IR) transparent range (up to 16.6 µm), so they can become promising candidates as birefringent materials applied in both UV and IR regions. In addition, a comprehensive analysis on crystal structures and structure-property relationship of metal Sn2+-based halides is performed to fully understand this family. Therefore, this work provides insights into designing birefringent materials with balanced optical properties.

Band Structure Optimized by Electron-Acceptor Cations for Sensitive Perovskite Single Crystal Self-Powered Photodetectors.

Low-dimensional perovskites afford improved stability against moisture, heat, and ionic migration. However, the low dimensionality typically results in a wide bandgap and strong electron-phonon coupling, which is undesirable for optoelectronic applications. Herein, semiconducting A-site organic cation engineering by electron-acceptor bipyridine (bpy) cations (2,2'-bpy2+ and 4,4'-bpy2+) is employed to optimize band structure in low-dimensional perovskites. Benefiting from the merits of lower lowest unoccupied molecular orbital (LUMO) energy for 4,4'-bpy2+ cation, the corresponding (4,4'-bpy)PbI4 is endowed with a smaller bandgap (1.44 eV) than the (CH3NH3)PbI3 (1.57 eV) benchmark. Encouragingly, an intramolecular type II band alignment formation between inorganic Pb-I octahedron anions and bpy2+ cations favors photogenerated electron-hole pairs separation. In addition, a shortening distance between inorganic Pb-I octahedral chains in (4,4'-bpy)PbI4 single crystal (SC) can effectively promote carrier transfer. As a result, a self-powered photodetector based on (4,4'-bpy)PbI4 SC exhibits 131 folds higher on/off ratio (3807) than the counterpart of (2,2'-bpy)2Pb3I10 SC (29). The presented result provides an effective strategy for exporting novel organic cation-based low-dimensional perovskite SC for high-performance optoelectronic devices.

Spacer Engineering Enables Fine-Tuned Thin Film Microstructure and Efficient Charge Transport for Ultrasensitive 2D Perovskite-Based Heterojunction Phototransistors and Optoelectronic Synapses.

2D Ruddlesden-Popper phase layered perovskites (RPLPs) hold great promise for optoelectronic applications. In this study, a series of high-performance heterojunction phototransistors (HPTs) based on RPLPs with different organic spacer cations (namely butylammonium (BA+), cyclohexylammonium (CyHA+), phenethylammonium (PEA+), p-fluorophenylethylammonium (p-F-PEA+), and 2-thiophenethylammonium (2-ThEA+)) are fabricated successfully, in which high-mobility organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b]benzothiophene is adopted to form type II heterojunction channels with RPLPs. The 2-ThEA+-RPLP-based HPTs show the highest photosensitivity of 3.18 × 107 and the best detectivity of 9.00 × 1018 Jones, while the p-F-PEA+-RPLP-based ones exhibit the highest photoresponsivity of 5.51 × 106 A W-1 and external quantum efficiency of 1.32 × 109%, all of which are among the highest reported values to date. These heterojunction systems also mimicked several optically controllable fundamental characteristics of biological synapses, including excitatory postsynaptic current, paired-pulse facilitation, and the transition from short-term memory to long-term memory states. The device based on 2-ThEA+-RPLP film shows an ultra-high PPF index of 234%. Moreover, spacer engineering brought fine-tuned thin film microstructures and efficient charge transport/transfer, which contributes to the superior photodetection performance and synaptic functions of these RPLP-based HPTs. In-depth structure-property correlations between the organic spacer cations/RPLPs and thin film microstructure/device performance are systematically investigated.

Homogenizing The Low-Dimensional Phases for Stable 2D-3D Tin Perovskite Solar Cells.

2D-3D tin-based perovskites are considered as promising candidates for achieving efficient lead-free perovskite solar cells (PSCs). However, the existence of multiple low-dimensional phases formed during the film preparation hinders the efficient transport of charge carriers. In addition, the non-homogeneous distribution of low-dimensional phases leads to lattice distortion and increases the defect density, which are undesirable for the stability of tin-based PSCs. Here, mixed spacer cations [diethylamine (DEA+) and phenethylamine (PEA+)] are introduced into tin perovskite films to modulate the distribution of the 2D phases. It is found that compared to the film with only PEA+, the combination of DEA+ and PEA+ favors the formation of homogeneous low-dimensional perovskite phases with three octahedral monolayers (n = 3), especially near the bottom interface between perovskite and hole transport layer. The homogenization of 2D phases help improve the film quality with reduced lattice distortion and released strain. With these merits, the tin PSC shows significantly improved stability with 94% of its initial efficiency retained after storing in a nitrogen atmosphere for over 4600 h, and over 80% efficiency maintained after continuous illumination for 400 h.

Chiral-Achiral Cations Intercalation Induced Lead-Free Chiral-Polar Hybrid Perovskites Enable Self-Powered X-Ray and Ultraviolet-Visible-Near-Infrared Photo Detection.

Lead halide hybrid perovskites have made great progress in direct X-ray detection and broadband photodetection, but the existence of toxic Pb and the demand for external operating voltage have severely limited their further applications and operational stability improvements. Therefore, exploring "green" lead-free hybrid perovskite that can both achieve X-ray detection and broadband photodetection without external voltage is of great importance, but remains severely challenging. Herein, using centrosymmetric (BZA)3BiI6 (1, BZA = benzylamine) as a template, a pair of chiral-polar lead-free perovskites, (BZA)2(R/S-PPA)BiI6 (2-R/S, R/S-PPA = (R/S)-1-Phenylpropylamine) are successfully obtained by introducing chiral aryl cations of (R/S)-1-Phenylpropylamine. Compared to 1, chiral-polar 2-R presents a significant irradiation-responsive bulk photovoltaic effect (BPVE) with an open circuit photovoltage of 0.4 V, which enables it with self-powered X-ray, UV-vis-NIR broadband photodetection. Specifically, 2-R device exhibits an ultralow detection limit of 18.5 nGy s-1 and excellent operational stability. Furthermore, 2-R as the first lead-free perovskite achieves significant broad-spectrum (377-940 nm) photodetection via light-induced pyroelectric effect. This work sheds light on the rational crystal reconstruction engineering and design of "green" hybrid perovskite toward high-demanded self-powered radiation detection and broadband photodetection.

Probing gas phase catalysis by atomic metal cations with flow tube mass spectrometry.

The evolution and applications of flow tube mass spectrometry in the study of catalysis promoted by atomic metal ions are tracked from the pioneering days in Boulder, Colorado, to the construction and application of the ICP/SIFT/QqQ and ESI/qQ/SIFT/QqQ instruments at York University and the VISTA-SIFT instrument at the Air Force Research Laboratory. The physical separation of various sources of atomic metal ions from the flow tube in the latter instruments facilitates the spatial resolution of redox reactions and allows the separate measurement of the kinetics of both legs of a two-step catalytic cycle, while also allowing a view of the catalytic cycle in progress downstream in the reaction region of the flow tube. We focus on measurements on O-atom transfer and bond activation catalysis as first identified in Boulder and emphasize fundamental aspects such as the thermodynamic window of opportunity for catalysis, catalytic efficiency, and computed energy landscapes for atomic metal cation catalysis. Gas-phase applications include: the catalytic oxidation of CO to CO2 , of H2 to H2 O, and of C2 H4 to CH3 CHO all with N2 O as the source of oxygen; the catalytic oxidation of CH4 to CH3 OH with O3 ; the catalytic oxidation of C6 H6 with O2 . We also address the environmentally important catalytic reduction of NO2 and NO to N2 with CO and H2 by catalytic coupling of two-step catalytic cycles in a multistep cycle. Overall, the power of atomic metal cations in catalysis, and the use of flow tube mass spectrometry in revealing this power, is clearly demonstrated.

An N-terminal acidic ß-sheet domain is responsible for the metal-accumulation properties of amyloid-ß protofibrils: a molecular dynamics study.

The influence of metal ions on the structure of amyloid- ß (Aß) protofibril models was studied through molecular dynamics to explore the molecular mechanisms underlying metal-induced Aß aggregation relevant in Alzheimer's disease (AD). The models included 36-, 48-, and 188-mers of the Aß42 sequence and two disease-modifying variants. Primary structural effects were observed at the N-terminal domain, as it became susceptible to the presence of cations. Specially when ß-sheets predominate, this motif orients N-terminal acidic residues toward one single face of the ß-sheet, resulting in the formation of an acidic region that attracts cations from the media and promotes the folding of the N-terminal region, with implications in amyloid aggregation. The molecular phenotype of the protofibril models based on Aß variants shows that the AD-causative D7N mutation promotes the formation of N-terminal ß-sheets and accumulates more Zn2+, in contrast to the non-amyloidogenic rodent sequence that hinders the ß-sheets and is more selective for Na+ over Zn2+ cations. It is proposed that forming an acidic ß-sheet domain and accumulating cations is a plausible molecular mechanism connecting the elevated affinity and concentration of metals in Aß fibrils to their high content of ß-sheet structure at the N-terminal sequence.

Thermochromic Hydrogels with Opaque-Transparent Gradient Transition for Switchable Window and Temperature Monitor.

In recent years, the thermochromic hydrogel was acted as suitable sandwiching material to adjust light transmission. However, to accurately control the thermochromic temperature in a wide range still was a significant challenge. Here, a simple method was explored to prepare hydrogels with gradient opaque-transparent transition thermochromic temperature from 5 °C to 53 °C, which was regulated by the aggregation state of sodium dodecyl sulfate micelles by adding potassium tartrate hemihydrate and cations. Using Li+ , Na+ , and K+ as cations, the accuracy was controlled at 1 °C. Moreover, the transmittance of the hydrogel was not changed when the thermochromic temperature was adjusted. As a result, an intelligent window was fabricated by utilizing thermochromic hydrogel as a sandwiching layer into the outer glass layers, which could effectively and stably regulate the visible and infrared light. The temperature monitors/detectors were also designed, which showed excellent temperature monitoring/detecting ability. Therefore, this low-cost, high-efficient, large-scale prepared thermochromic hydrogel provided more potential for intelligent temperature devices.

Cation-Stacking Approach Enabling Interconversion between Bis(xanthylium) and its Reduced Species.

Cyclophane-type dications with two units of xanthylium were designed, with the expectation that intramolecular interaction between cation units could induce changes in absorption and redox behavior. The desired dications were synthesized via the macrocyclic diketone as a key intermediate, which was efficiently obtained by a stepwise etherification. X-ray and UV/Vis measurements revealed that the cyclophane-type dications adopt a stacking structure in both the crystal and solution. Due to the intramolecular interaction caused by π-π stacking of the xanthylium units, a considerable blue shift compared to the corresponding monocations and a two-stage one-electron reduction process were observed in the dications. Furthermore, upon electrochemical reduction of dications, the formation of biradicals via radical cation species was demonstrated by UV/Vis spectroscopy with several isosbestic points at both stages. Therefore, the cation-stacking approach is a promising way to provide novel properties due to perturbation of their molecular orbitals and to stabilize the reduced species even though they have open-shell characters.

Thermal Equilibrium Between Quinoid/Biradical Forms Enhancing Electrochemical Amphotericity.

Upon dibenzo annulation on Thiele's hydrocarbon (tetraphenyl-p-quinodimethane), the quinoid form and the biradical form adopt quite different geometries, and thus are no longer resonance structures. When these two forms can interconvert rapidly due to the small energy barrier (ΔG≠), the equilibrated mixture contains both forms in a ratio that is determined by the energy difference (ΔGo) between the two forms. For a series of tetrakis[5-(4-methoxyphenyl)-2-thienyl]-substituted derivatives, the more stable quinoid form and the metastable biradical form coexist in solution as an equilibrated mixture due to small ΔG≠ (<15 kcal mol-1) and ΔGo (1-4 kcal mol-1), in which the proportion of the two forms can be regulated by temperature. Since the biradical form can undergo easy two-electron (2e) oxidation to the corresponding dications as well as easy 2e-reduction to the dianions, it exhibits very high electrochemical amphotericity. This character with a record-small span for not only the first oxidation and reduction potentials but also the second those, [E1 sum≈E2 sum=E2 ox-E2 red=ca. 1.4 V], is attained through thermally enhanced conversion to the biradical form from the corresponding quinoid form, the latter of which is less amphoteric due to higher Eox and lower Ered values.

From the Iron Pentacarbonyl Cation to Heteroleptic η6-arene Carbonyls and bis-η6-arene Cations.

Partial ligand substitution at the iron pentacarbonyl radical cation generates novel half-sandwich complexes of the type [Fe(η6-arene)(CO)2]⋅+ (arene=1,3,5-tri-tert-butylbenzene, 1,3,5-trimethylbenzene, benzene and fluorobenzene). Of those, the bulkier 1,3,5-tri-tert-butylbenzene (mes*) derivative [Fe(mes*)(CO)2]⋅+ was fully characterized by XRD analysis, IR, NMR, cw-EPR, Mössbauer spectroscopy and cyclic voltammetry as the [Al(ORF)4]- (RF=C(CF3)3) salt. Chemical electronation, i. e., the single electron reduction, with decamethylferrocene generates neutral [Fe(mes*)(CO)2], whereas further deelectronation under CO-pressure leads to a dicationic three-legged [Fe(mes*)(CO)3]2+ salt with [Al(ORF)4]- counterion. The full substitution of the carbonyl ligands in [Fe(CO)5]⋅+[Al(ORF)4]- mainly resulted in disproportionation reactions, giving solid Fe(0) and the dicationic bis-arene salts [Fe(η6-arene)2]2+([Al(ORF)4]-)2 (arene=1,3,5-trimethylbenzene, benzene and fluorobenzene). Only by employing the very large fluoride bridged anion [F-{Al(ORF)3}2]-, it was possible to isolate an open shell bis-arene cation salt [Fe(C6H6)2]⋅+[F-{Al(ORF)3}2]-. The highly reactive cation was characterized by XRD analysis, cw-EPR, Mössbauer spectroscopy and cyclic voltammetry. The disproportionation of [Fe(C6H6)2]⋅+ salts to give solid Fe(0) and [Fe(C6H6)2]2+ salts was analyzed by a suitable cycle, revealing that the thermodynamic driving force for the disproportionation is a function of the size of the anion used and the polarity of the solvent.

Electrochemical Oxidation Enables Radical Dearomative Spiroannulation to 2H-Spiro[benzofuran-3,9'-fluoren]-2-one.

Developing pragmatic strategies for accessing functional benzofuran-2-ones from 3-([1,1'-biphenyl]-2-yl)benzofuran remains an enduring challenge. Herein, we have achieved a highly discriminating electrochemical oxidative dearomative spiroannulation of 3-([1,1'-biphenyl]-2-yl)benzofuran, culminating in the synthesis of 2H-spiro[benzofuran-3,9'-fluoren]-2-one derivatives. By harnessing the electrophilic intermediates of benzofuryl radical cations supported by DFT calculations, we attain exceptional regioselectivity while eliminating the need for stoichiometric oxidants. Mechanistic investigations reveal a sequence of events involving the benzofuran radical cation, encompassing the capture of H2O, nucleophilic arene attack, and subsequent deprotonation, ultimately yielding the final benzofuran-2-ones.

Suppressing Cis/Trans 'Ring-Flipping' in Organoaluminium(III)-2-Pyridyl Dimers-Design Strategies Towards Lewis Acid Catalysts for Alkene Oligomerisation.

Owing to its high natural abundance compared to the commonly used transition (precious) metals, as well as its high Lewis acidity and ability to change oxidation state, aluminium has recently been explored as the basis for a range of single-site catalysts. This paper aims to establish the ground rules for the development of a new type of cationic alkene oligomerisation catalyst containing two Al(III) ions, with the potential to act co-operatively in stereoselective assembly. Five new dimers of the type [R2Al(2-py')]2 (R=Me, iBu; py'=substituted pyridyl group) with different substituents on the Al atoms and pyridyl rings have been synthesised. The formation of the undesired cis isomers can be suppressed by the presence of substituents on the 6-position of the pyridyl ring due to steric congestion, with DFT calculations showing that the selection of the trans isomer is thermodynamically controlled. Calculations show that demethylation of the dimers [Me2Al(2-py')]2 with Ph3C+ to the cations [{MeAl(2-py')}2(µ-Me)]+ is highly favourable and that the desired trans disposition of the 2-pyridyl ring units is influenced by steric effects. Preliminary experimental studies confirm that demethylation of [Me2Al(6-MeO-2-py)]2 can be achieved using [Ph3C][B(C6F5)4].