RESUMO
Biomolecular piezoelectric materials show great potential in the field of wearable and implantable biomedical devices. Here, a self-assemble approach is developed to fabricating flexible ß-glycine piezoelectric nanofibers with interfacial polarization locked aligned crystal domains induced by Nb2CTx nanosheets. Acted as an effective nucleating agent, Nb2CTx nanosheets can induce glycine to crystallize from edges toward flat surfaces on its 2D crystal plane and form a distinctive eutectic structure within the nanoconfined space. The interfacial polarization locking formed between O atom on glycine and Nb atom on Nb2CTx is essential to align the ß-glycine crystal domains with (001) crystal plane intensity extremely improved. This ß-phase glycine/Nb2CTx nanofibers (Gly-Nb2C-NFs) exhibit fabulous mechanical flexibility with Young's modulus of 10 MPa, and an enhanced piezoelectric coefficient of 5.0 pC N-1 or piezoelectric voltage coefficient of 129 × 10-3Vm N-1. The interface polarization locking greatly improves the thermostability of ß-glycine before melting (≈210°C). A piezoelectric sensor based on this Gly-Nb2C-NFs is used for micro-vibration sensing in vivo in mice and exhibits excellent sensing ability. This strategy provides an effective approach for the regular crystallization modulation for glycine crystals, opening a new avenue toward the design of piezoelectric biomolecular materials induced by 2D materials.
RESUMO
Coamorphous and cocrystal drug delivery systems provide attractive crystal engineering strategies for improving the solubilities, dissolution rates, and oral bioavailabilities of poorly water-soluble drugs. Polymeric additives have often been used to inhibit the unwanted crystallization of amorphous drugs. However, the transformation of a coamorphous phase to a cocrystal phase in the presence of polymers has not been fully elucidated. Herein, we investigated the effects of low concentrations of the polymeric excipients poly(ethylene oxide) (PEO) and poly(vinylpyrrolidone) (PVP) on the growth of carbamazepine-celecoxib (CBZ-CEL) cocrystals from the corresponding coamorphous phase. PEO accelerated the growth rate of the cocrystals by increasing the molecular mobility of the coamorphous system, while PVP had the opposite effect. The coamorphous CBZ-CEL system exhibited two anomalously fast crystal growth modes: glass-to-crystal (GC) growth in the bulk and accelerated crystal growth at the free surface. These two fast growth modes both disappeared after doping with PEO (1-3% w/w) but were retained in the presence of PVP, indicating a potential correlation between the two fast crystal growth modes. We propose that the different effects of PEO and PVP on the crystal growth modes arose from weaker effects of the polymers on cocrystallization at the surface than in the bulk. This work provides a deep understanding of the mechanisms by which polymers influence the cocrystallization kinetics of a multicomponent amorphous phase and highlights the importance of polymer selection in stabilizing coamorphous systems or preparing cocrystals via solid-based methods.
Assuntos
Carbamazepina , Cristalização , Polietilenoglicóis , Polímeros , Povidona , Solubilidade , Polímeros/química , Polietilenoglicóis/química , Carbamazepina/química , Povidona/química , Excipientes/química , Vidro/químicaRESUMO
One way to increase the slow dissolution rate and the associated low bioavailability of newly developed active pharmaceutical ingredients (APIs) is to dissolve the API in a polymer, leading to a so-called amorphous solid dispersion (ASD). However, APIs are often supersaturated in ASDs and thus tend to crystallize during storage. The kinetics of the crystallization process is determined by the amount of water the ASD absorbs during storage at relative humidity (RH), storage temperature, polymer type, and the drug load of the ASD. Here, the crystallization kinetics and shelf life of spray-dried ASDs were investigated for ASDs consisting of nifedipine (NIF) or celecoxib (CCX) as the APIs and of poly(vinylpyrrolidone-co-vinyl acetate) or hydroxypropyl methylcellulose acetate succinate as polymers. Samples were stored over 2 years at different RHs covering conditions above and below the glass transition of the wet ASDs. Crystallization kinetics and onset time of the crystallization were qualitatively studied by using powder X-ray diffraction and microscopic inspection and were quantitatively determined by using differential scanning calorimetry. It was found that the NIF ASDs crystallize much faster than CCX ASDs at the same drug load and at the same storage conditions due to both higher supersaturation and higher molecular mobility in the NIF ASDs. Experimental data on crystallization kinetics were correlated using the Johnson-Mehl-Avrami-Kolmogorov equation. A detailed thermodynamic and kinetic modeling will be performed in Part 2 of this paper series.
Assuntos
Polímeros , Água , Cristalização , Água/química , Estabilidade de Medicamentos , Solubilidade , Polímeros/químicaRESUMO
The physical stability of amorphous solid dispersions (ASDs) is a major topic in the formulation research of oral dosage forms. To minimize the effort of investigating the long-term stability using cost- and time-consuming experiments, we developed a thermodynamic and kinetic modeling framework to predict and understand the crystallization kinetics of ASDs during long-term storage below the glass transition. Since crystallization of the active phrarmaceutical ingredients (APIs) in ASDs largely depends on the amount of water absorbed by the ASDs, water-sorption kinetics and API-crystallization kinetics were considered simultaneously. The developed modeling approach allows prediction of the time evolution of viscosity, supersaturation, and crystallinity as a function of drug load, relative humidity, and temperature. It was applied and evaluated against two-year-lasting crystallization experiments of ASDs containing nifedipine and copovidone or HPMCAS measured in part I of this work. We could show that the proposed modeling approach is able to describe the interplay between water sorption and API crystallization and to predict long-term stabilities of ASDs just based on short-term measurements. Most importantly, it enables explaining and understanding the reasons for different and sometimes even unexpected crystallization behaviors of ASDs.
Assuntos
Cristalização , Água , Cristalização/métodos , Água/química , Cinética , Estabilidade de Medicamentos , Nifedipino/química , Compostos de Vinila/química , Termodinâmica , Pirrolidinas/química , Viscosidade , Química Farmacêutica/métodos , Umidade , Temperatura , Solubilidade , Metilcelulose/química , Metilcelulose/análogos & derivadosRESUMO
Crystallization is a fundamental natural phenomenon and the ubiquitous physical process in materials science for the design of new materials. So far, experimental observations of the structural dynamics in crystallization have been mostly restricted to slow dynamics. We present here an exclusive way to explore the dynamics of crystallization in highly controlled conditions (i.e., in the absence of impurities acting as seeds of the crystallites) as it occurs in vacuum. We have measured the early formation stage of solid Xe nanoparticles nucleated in an expanding supercooled Xe jet by means of an X-ray diffraction experiment with 10-fs X-ray free-electron laser (XFEL) pulses. We found that the structure of Xe nanoparticles is not pure face-centered cubic (fcc), the expected stable phase, but a mixture of fcc and randomly stacked hexagonal close-packed (rhcp) structures. Furthermore, we identified the instantaneous coexistence of the comparably sized fcc and rhcp domains in single Xe nanoparticles. The observations are explained by the scenario of structural aging, in which the nanoparticles initially crystallize in the highly stacking-disordered rhcp phase and the structure later forms the stable fcc phase. The results are reminiscent of analogous observations in hard-sphere systems, indicating the universal role of the stacking-disordered phase in nucleation.
RESUMO
It is a valid path to realize the zero discharge of coal chemical wastewater by using the fractional crystallization method to recycle the miscellaneous salt in high-salinity wastewater. In this study, the thermodynamics and nucleation kinetics of sodium chloride (NaCl) and sodium sulfate (Na2SO4) crystallization in coal chemical wastewater were systematically studied. Through analyses of solubility, metastable zone width, and induction period, it was found that the impurity dimethoxymethane would increase the solid-liquid interface energy and critical crystal size during the nucleation of Na2SO4. Ternary phase diagrams of the pseudo-ternary Na2SO4-NaCl-H2O systems in simulated wastewater were plotted in the temperature range of 303.15 to 333.15 K, indicating that a co-ionization effect existed between NaCl and Na2SO4, and NaCl had a strong salting out effect on Na2SO4. Finally, the nucleation rate and growth rate of Na2SO4 crystals under simulated wastewater conditions were determined by the intermittent dynamic method, and the crystallization kinetic models of Na2SO4 were established. The crystallization nucleation of Na2SO4 crystals was found to be secondary nucleation controlled by surface reactions. The basic theoretical research of crystallization in this study is expected to fundamentally promote the application of fractional crystallization to realize the resource utilization of high-salinity wastewater in the coal chemical industry.
RESUMO
Metal halide perovskites (MHPs) are considered ideal photovoltaic materials due to their variable crystal material composition and excellent photoelectric properties. However, this variability in composition leads to complex crystallization processes in the manufacturing of Metal halide perovskite (MHP) thin films, resulting in reduced crystallinity and subsequent performance loss in the final device. Thus, understanding and controlling the crystallization dynamics of perovskite materials are essential for improving the stability and performance of PSCs (Perovskite Solar Cells). To investigate the impact of crystallization characteristics on the properties of MHP films and identify corresponding modulation strategies, we primarily discuss the relevant aspects of MHP crystallization kinetics, systematically summarize theoretical methods, and outline modulation techniques for MHP crystallization, including solution engineering, additive engineering, and component engineering, which helps highlight the prospects and current challenges in perovskite crystallization kinetics.
RESUMO
Tin halide perovskites (THPs) have demonstrated exceptional potential for various applications owing to their low toxicity and excellent optoelectronic properties. However, the crystallization kinetics of THPs are less controllable than its lead counterpart because of the higher Lewis acidity of Sn2+, leading to THP films with poor morphology and rampant defects. Here, a colloidal zeta potential modulation approach is developed to improve the crystallization kinetics of THP films inspired by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. After adding 3-aminopyrrolidine dihydro iodate (APDI2) in the precursor solution to change the zeta potential of the pristine colloids, the total interaction potential energy between colloidal particles with APDI2 could be controllably reduced, resulting in a higher coagulation probability and a lower critical nuclei concentration. In situ laser light scattering measurements confirmed the increased nucleation rate of the THP colloids with APDI2. The resulting film with APDI2 shows a pinhole-free morphology with fewer defects, achieving an impressive efficiency of 15.13 %.
RESUMO
The power conversion efficiencies (PCEs) of perovskite solar cells have recently developed rapidly compared to crystalline silicon solar cells. To have an effective way to control the crystallization of perovskite thin films is the key for achieving good device performance. However, a paradox in perovskite crystallization is from the mismatch between nucleation and Oswald ripening. Usually, the large numbers of nucleation sites tend to weak Oswald ripening. Here, we proposed a new mechanism to promote the formation of nucleation sites by reducing surface energy from 44.9â mN/m to 36.1â mN/m, to spontaneously accelerate the later Oswald ripening process by improving the grain solubility through the elastic modulus regulation. The ripening rate is increased from 2.37â Åm â s-1 to 4.61â Åm â s-1 during annealing. Finally, the solar cells derived from the optimized films showed significantly improved PCE from 23.14 % to 25.32 %. The long-term stability tests show excellent thermal stability (the optimized device without encapsulation maintaining 82 % of its initial PCE after 800â h aging at 85 °C) and an improved light stability under illumination. This work provides a new method, the elastic modulus regulation, to enhance the ripening process.
RESUMO
Functional passivators are conventionally utilized in modifying the crystallization properties of perovskites to minimize the non-radiative recombination losses in perovskite light-emitting diodes (PeLEDs). However, the weak anchor ability of some commonly adopted molecules has limited passivation ability to perovskites and even may desorb from the passivated defects in a short period of time, which bring about plenty of challenges for further development of high-performance PeLEDs. Here, a multidentate molecule, formamidine sulfinic acid (FSA), is introduced as a novel passivator to perovskites. FSA has multifunctional groups (SâO, CâN and NH2 ) where the SâO and CâN groups enable coordination with the lead ions and the NH2 interacts with the bromide ions, thus providing the most effective chemical passivation for defects and in turn the formation of highly stable perovskite emitters. Moreover, the interaction between the FSA and octahedral [PbBr6 ]4- can inhibit the formation of unfavorable low-n domains to further minimize the inefficient energy transfer inside the perovskite emitters. Therefore, the FSA passivated green-emitting PeLED exhibits a high external quantum efficiency (EQE) of 26.5% with fourfold enhancement in operating lifetime as compared to the control device, consolidating that the multidentate molecule is a promising strategy to effectively and sustainably passivate the perovskites.
RESUMO
The growth of high-quality halide perovskite single crystals is imperative to study their intrinsic physical properties and to realize high-performance optoelectronic devices. Here, a room-temperature solvent evaporation-induced crystallization (RTSEIC) method is reported based on Le Chatelier's principle, which provides a general strategy to grow halide perovskite single crystals including 3D, 2D, 1D, and 0D, and either hybrid or all-inorganic halide perovskites. Taking 2D n-BA2 PbBr4 (n-BA = butylammonium) as an example, the room-temperature crystallization kinetics is demonstrated. The centimeter-sized n-BA2 PbBr4 single crystals exhibit an extremely small full width at half maximum (FWHM) of 0.024° in (0 0 2) plane rocking curve and a small trap density of 2.74 × 1010 cm-3 . The superior crystalline quality endows the n-BA2 PbBr4 single crystal ultraviolet photodetectors with recorded performance among reported n-BA2 PbBr4 ultraviolet photodetectors, demonstrating a detectivity reaching 1.8 × 1013 Jones, a fast response time of 55 µs and a high on-off ratio of 104 . The low-cost, simple, general, and efficient RTSEIC method is anticipated to promote the blossoming of halide perovskites single crystals.
RESUMO
Preparation of lead halide perovskite polycrystalline films at a low annealing temperature is highly restricted by their intrinsically large crystallization activation energy, which hinders the conversion of the precursors/intermediates to perovskites and yields as-prepared polycrystals with tiny grain sizes and terrible crystal quality. Herein, we demonstrate through in-situ, real-time spectroscopic studies that both the nucleation and crystal growth kinetics can be improved without the need for a high annealing temperature by treating the film with thiourea, as accounted for by the reduced activation energy. As a consequence, the thiourea-treated perovskite polycrystalline film exhibits larger grain sizes and greater crystallinity than the untreated one. More importantly, owing to the synergistic effect of the promoted crystallization kinetics and the passivation of surface defects, the low-temperature prepared films treated with thiourea even present more prominent photophysical properties than those fabricated by using the conventional high-temperature method. The strategy of crystallization kinetics engineering proposed in this work paves the way for fabricating high-quality perovskite polycrystalline films in a low-temperature manner.
RESUMO
Two-dimensional (2D) CsPbI3 is developed to conquer the phase-stability problem of CsPbI3 by introducing bulky organic cations to produce a steric hindrance effect. However, organic cations also inevitably increase the formation energy and difficulty in crystallization kinetics regulation. Such poor crystallization process modulation of 2D CsPbI3 leads to disordered phase-arrangement, which impedes the transport of photo-generated carriers and worsens device performance. Herein, a type of C3 N quantum dots (QDs) with ordered carbon and nitrogen atoms to manipulate the crystallization process of 2D CsPbI3 for improving the crystallization pathway, phase-arrangement and morphology, is introduced. Combination analyses of theoretical simulation, morphology regulation and femtosecond transient absorption (fs-TA) characterization, show that the C3 N QDs induce the formation of electron-rich regions to adsorb bulky organic cations and provide nucleation sites to realize a bi-directional crystallization process. Meanwhile, the quality of 2D CsPbI3 film is improved with lower trap density, higher surface potential, and compact morphology. As a result, the power conversion efficiency (PCE) of the optimized device (n = 5) boosts to an ultra-high value of 15.63% with strengthened environmental stability. Moreover, the simple C3 N QDs insertion method shows good universality to other bulky organic cations of Ruddlesden-Popper and Dion-Jacobson, providing a good modulation strategy for other optoelectronic devices.
RESUMO
Understanding the supersaturation and precipitation behavior of poorly water-soluble compounds in vivo and the impact on oral absorption is critical to design consistently performing products with optimized bioavailability. Weakly basic compounds are of particular importance in this context since they have an inherent tendency to undergo supersaturation in vivo upon exit from the stomach and entry into the small intestine because of their pH-dependent solubility. To understand and probe potential in vivo variability of supersaturating systems, rigorous understanding of compound physical properties and phase behavior landscape is essential. Herein, we extensively characterize the solution phase behavior of a model, poorly soluble and weakly basic compound, posaconazole. Phase boundaries for crystal-solution and amorphous-solution were established as a function of pH, allowing possible phase transformations, namely, crystallization or liquid-liquid phase separation, to be mapped for different initial doses and fluid volumes. Endogenous surfactants including sodium taurocholate, lecithin, glycerol monooleate, and sodium oleate in biorelevant media significantly extended the phase boundaries due to solubilization, to an extent that was dependent on the concentration of the surface-active agents. The nucleation induction time of posaconazole was much shorter in biorelevant media in comparison to the corresponding buffer solution, with two distinct regions observed in all media that could be attributed to a change in the nucleation mechanism at high and low supersaturation. The presence of undissolved nanocrystals accelerated the desupersaturation. This work enhances our understanding of biorelevant factors impacting precipitation kinetics, which might affect absorption in vivo. It is expected that findings from this study with posaconazole could be broadly applicable to other weakly basic compounds, after taking into consideration differences in pKa, solubility, and molecular structure.
Assuntos
Tensoativos , Água , Cristalização , Cinética , SolubilidadeRESUMO
Amorphous formulations, increasingly employed to deliver poorly soluble drugs, generally contain surfactants to improve wetting and dissolution. These surfactants are often liquids and can potentially increase the mobility of the drug and reduce its stability, but little is known about this effect. Here we investigate the effect of four common nonionic surfactants (Tween 80, Span 80, Triton X-100, and Poloxamer 407) on the crystallization of amorphous nifedipine (NIF). We find that the surfactants significantly enhance the rates of crystal nucleation and growth even at low concentrations, by up to 2 orders of magnitude at 10 wt %. The surfactants tested show similar enhancement effects independent of their structural details and hydrophilic-lipophilic balance (HLB), suggesting that surfactant adsorption at solid/liquid interfaces does not play a major role in crystal nucleation and growth. Importantly, the surfactants accelerate crystal nucleation and growth by a similar factor. This result mirrors the previous finding that a polymer dopant in a molecular glass-former causes similar slowdown of nucleation and growth. These results indicate that nucleation and growth in a deeply supercooled liquid are both mobility-limited, and a dopant mainly functions as a mobility modifier (enhancer or suppressor depending on the dopant). The common surfactants tested are all mobility enhancers and destabilize the amorphous drug, and this negative effect must be managed using stabilizers such as polymers. The effect of surfactants on nucleation can be predicted from the effect on crystal growth and the crystallization kinetics of the pure system, using the same principle previously established for drug-polymer systems. We show how the independently measured nucleation and growth rates enable predictions of the overall crystallization rates.
Assuntos
Nifedipino , Tensoativos , Cristalização , Interações Hidrofóbicas e Hidrofílicas , Nifedipino/química , Polímeros/química , Solubilidade , Tensoativos/químicaRESUMO
Amorphous solid dispersions (ASDs), where an active pharmaceutical ingredient (API) is dissolved in a polymer, are a favored formulation technique to achieve sufficient bioavailability of poorly water-soluble APIs. The shelf life of such ASDs is often limited by API crystallization. Crystallization depends strongly on the storage conditions (relative humidity and temperature) and the polymer selected for generating the ASD. Determining the crystallization kinetics of ASDs under various conditions requires suitable analytical methods. In this work, two different analytical methods were compared and cross-validated: The first builds on water-sorption measurements combined with thermodynamic predictions ( Eur. J. Pharm. Biopharm. 2018, 127, 183-193, DOI: 10.1016/j.toxrep.2018.11.002), whereas the second applies Raman spectroscopy. Using the two independent methods, factors influencing the crystallization kinetics of ASDs containing the API griseofulvin were investigated quantitatively. It was found that crystallization kinetics increases with increasing temperature and relative humidity. Additionally, the influence of different polymers (poly(vinylpyrrolidone-co-vinyl acetate) and Soluplus) on crystallization kinetics were investigated. The experimentally obtained crystallization kinetics were described using the Johnson-Mehl-Avrami-Kolmogorov model and are the basis for future shelf life predictions at desired storage conditions.
Assuntos
Química Farmacêutica , Excipientes , Química Farmacêutica/métodos , Cristalização , Composição de Medicamentos/métodos , Estabilidade de Medicamentos , Excipientes/química , Cinética , Polímeros/química , Solubilidade , Água/químicaRESUMO
In this contribution, we study the effect of trifluoro ethylene (TrFE) comonomer content (samples with 80/20, 75/25, and 70/30 VDF/TrFE molar ratios were used) on the crystallization in P(VDF-co-TrFE) in comparison with a PVDF (Poly(vinylidene fluoride)) homopolymer. Employing Polarized Light Optical Microscopy (PLOM), the growth rates of spherulites or axialites were determined. Differential Scanning Calorimetry (DSC) was used to determine overall crystallization rates, self-nucleation, and Successive Self-nucleation and Annealing (SSA) thermal fractionation. The ferroelectric character of the samples was explored by polarization measurements. The results indicate that TrFE inclusion can limit the overall crystallization of the copolymer samples, especially for the ones with 20 and 25% TrFE. Self-nucleation measurements in PVDF indicate that the homopolymer can be self-nucleated, exhibiting the classic three Domains. However, the increased nucleation capacity in the copolymers provokes the absence of the self-nucleation Domain II. The PVDF displays a monomodal distribution of thermal fractions after SSA, but the P(VDF-co-TrFE) copolymers do not experience thermal fractionation, apparently due to TrFE incorporation in the PVDF crystals. Finally, the maximum and remnant polarization increases with increasing TrFE content up to a maximum of 25% TrFE content, after which it starts to decrease due to the lower dipole moment of the TrFE defect inclusion within the PVDF crystals.
Assuntos
Etilenos , Polivinil , Cristalização , Polímeros de Fluorcarboneto , Polivinil/químicaRESUMO
Amorphous solid dispersions (ASDs), which consist of a drug dispersed in a polymeric matrix, are increasingly being applied to improve the in vivo performance of poorly water-soluble drugs delivered orally. The polymer is a critical component, playing several roles including facilitating drug release from the ASD, as well as delaying crystallization from the supersaturated solution generated upon dissolution. Certain ASD formulations dissolve to produce amorphous drug-rich nanodroplets. The interaction of the polymer with these nanodroplets is poorly understood but is thought to be important for inhibiting crystallization in these systems. In this study, the impact of ionic polymers on the crystallization kinetics of enzalutamide from supersaturated solutions containing different amounts of amorphous nanodroplets was evaluated by determination of nucleation induction times. The amount of the polymer associated with the drug nanodroplets was also determined. When comparing two polymers, hydroxypropylmethyl cellulose acetate succinate (HPMCAS) and Eudragit E PO, it was found that the crystallization tendency and physical properties of the drug nanodroplets varied in the presence of these two polymers. Both polymers distributed between the aqueous phase and the drug-rich nanodroplets. A greater amount of Eudragit E PO was associated with the drug-rich nanodroplets. Despite this, Eudragit E PO was a less-effective crystallization inhibitor than HPMCAS in systems containing nanodroplets. In conclusion, in supersaturated solutions containing amorphous nanodroplets, the extent of association of a polymer with the drug nanodroplet does not solely predict crystallization inhibition.
Assuntos
Nanopartículas/química , Polímeros/química , Água/química , Cristalização/métodos , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos/efeitos dos fármacos , Derivados da Hipromelose/química , Metilcelulose/análogos & derivados , Metilcelulose/química , Solubilidade/efeitos dos fármacosRESUMO
Cold crystallization of amorphous pharmaceuticals is an important aspect in the search to stabilize amorphous or glassy compounds used as amorphous pharmaceutical ingredients (APIs). In the present work, we report results for the isothermal crystallization of the compound GDC-0276 based on differential scanning calorimetric and rheometric measurements. The kinetics of isothermal crystallization from the induction time to the completion of crystallization can be described by the classic Johnson-Mehl-Avrami (JMA) equation. The time-temperature-transformation (TTT) diagrams were constructed for two time points-that of induction and that of completion of crystallization. The results show that the rheological measurement for GDC-0276 has a better overall sensitivity in detection of the early stage nucleation and, consequently, detects the onset of crystallization sooner than does the differential scanning calorimetry. Rheological measurements were also used to obtain the temperature dependence of the viscosity of GDC-0276 and the relevant parameters were used in a modified form of the JMA model to describe the temperature dependence of the crystal induction and completion times, that is, the TTT diagram for the material. In the modification, we assumed that the kinetics followed the viscosity to the 0.75 power as suggested by the recent work of Huang et al. (Huang, C., et al., J. Chem. Phys.2018,149, 054503). The relationship and the possible impact on crystallization kinetics of the break-down of the Stokes-Einstein relation in glass-forming liquids are discussed. From the crystallization kinetics modeling, the solid-liquid interfacial surface tension σSL was obtained for GDC-0276 and was compared with that obtained from the melting point depression measurements of the material confined in nanoporous glasses. The differences between the values from the two methods are discussed.
Assuntos
Azetidinas/química , Benzamidas/química , Varredura Diferencial de Calorimetria/métodos , Cristalização/métodos , Vidro/química , Cinética , Reologia/métodos , Temperatura , Termodinâmica , Temperatura de TransiçãoRESUMO
Chemical derivatization and amorphization are two possible strategies to improve the solubility and bioavailability of drugs, which is a key issue for the pharmaceutical industry. In this contribution, we explore whether both strategies can be combined by studying how small differences in the molecular structure of three related pharmaceutical compounds affect their crystalline structure and melting point (Tm), the relaxation dynamics in the amorphous phase, and the glass transition temperature (Tg), as well as the tendency toward recrystallization. Three benzodiazepine derivatives of almost same molecular mass and structure (Diazepam, Nordazepam and Tetrazepam) were chosen as model compounds. Nordazepam is the only one that displays N-H···O hydrogen bonds both in crystalline and amorphous phases, which leads to a significantly higher Tm (by 70-80 K) and Tg (by 30-40 K) compared to those of Tetrazepam and Diazepam (which display similar values of characteristic temperatures). The relaxation dynamics in the amorphous phase, as determined experimentally using broadband dielectric spectroscopy, is dominated by a structural relaxation and a Johari-Goldstein secondary relaxation, both of which scale with the reduced temperature T/Tg. The kinetic fragility index is very low and virtually the same (mp ≈ 32) in all three compounds. Two more secondary relaxations are observed in the glass state: the slower of the two has virtually the same relaxation time and activation energy in all three compounds, and is assigned to the inter-enantiomer conversion dynamics of the flexible diazepine heterocycle between isoenergetic P and M conformations. We tentatively assign the fastest secondary relaxation, present only in Diazepam and Tetrazepam, to the rigid rotation of the fused diazepine-benzene double ring relative to the six-membered carbon ring. Such motion appears to be largely hindered in glassy Nordazepam, possibly due to the presence of the hydrogen bonds. Supercooled liquid Tetrazepam and Nordazepam are observed to crystallize into their stable crystalline form with an Avrami exponent close to unity indicating unidimensional growth with only sporadic nucleation, which allows a direct assessment of the crystal growth rate. Despite the very similar growth mode, the two derivatives exhibit very different kinetics for a fixed value of the reduced temperature and thus of the structural relaxation time, with Nordazepam displaying slower growth kinetics. Diazepam does not instead display any tendency toward recrystallization over short periods of time (even close to Tm). Both these observations in three very similar diazepine derivatives provide direct evidence that the kinetics of recrystallization of amorphous pharmaceuticals is not a universal function, at least in the supercooled liquid phase, of the structural or the conformational relaxation dynamics, and it is not simply correlated with related parameters such as the kinetic fragility or activation barrier of the structural relaxation. Only the crystal growth rate, and not the nucleation rate, shows a correlation with the presence or absence of hydrogen bonding.