Understanding the quality-of-life experiences of older or frail adults following a new dens fracture: Nonsurgical management in a hard collar versus early removal of collar.

INTRODUCTION: In the United Kingdom, fractures of the cervical dens process in older and/or frail patients are usually managed nonsurgically in a hard collar. However, hard collars can lead to complications and this management approach is now being questioned, with growing interest in maximising patients' short-term quality-of-life. It is vital that patients' perspectives are considered; yet, there is a dearth of literature examining the aspect. To help inform wider decision-making about use of collar/no collar management of dens fractures in older/frail people, we explored older/frail people's experience of the two management approaches and how they affected their perceived quality-of-life. METHODS: We interviewed older and/or frail adults with a recent dens fracture (aged ≥65 years or with a clinical frailty score of ≥5) or their caregiver. Participants were recruited from both arms of a clinical trial comparing management using a hard collar for 12 weeks (SM) with early removal of the collar (ERC) and were interviewed following randomisation and again, 12-16 weeks later. Data were analysed using a framework approach. RESULTS: Both participant groups (SM/ERC) reported substantial, negative quality-of-life (QoL) experiences, with the fall itself and lack of access to care services and information being frequent major contributory factors. Many negative experiences cut across both participant groups, including pain, fatigue, diminished autonomy and reduced involvement in personally meaningful activities. However, we identified some subtle, yet discernible, ways in which using SM/ERC reinforced or alleviated (negative) QoL impacts, with the perceived benefits/burdens to using SM/ERC varying between different individuals. CONCLUSION: Study findings can be used to support informed decision-making about SM/ERC management of dens fractures in older/frail patients. PATIENT OR PUBLIC CONTRIBUTION: Public and patient involvement contributors were involved in the study design, development of interview topic guides and interpretation of study findings.

Assessment of the results of occipito-cervical stabilization in cranio-vertebral damage.

Damage to the cranio-vertebral junction includes bone and ligament structures as well as the nervous system. Due to the unique structure of the occipital-atlanto-axial complex (C0-C1-C2) and biomechanical properties, they cause a surgical challenge. The aim of the surgery is to achieve bone fusion and stability of occipital-atlanto-axial complex. AIM: The aim of the study was to analyze the causes and effects of damage to the cranio-vertebral junction and the results of surgery with occipitocervical stabilization. MATERIALS AND METHODS: 43 patients who underwent occipital-cervical stabilization due to traumatic lesions in the C0-C1-C2 area were analyzed retrospectively in the 2000-2018 period in the Department of Neuroortopedia MCR STOCER. RESULTS: In 49%, the cause of trauma to the cranio-vertebral junction was a fall from a height, and it was in 37% a traffic accident. 70 % patients had C2 vertebra fracture with no stenosis of cervical canal and 14% had signs of C1-C2 instability. Politrauma was diagnosed in 9 patients and 23.3% of examined manifested neurological deficits. 70% of patients were in the 2nd group of risk according to the ASA scale. CONCLUSIONS: The analysis of damage to the cranio-vertebral junction showed that the main cause of injury was a fall. 21% patients presented tetraparesis. When qualifying patients after trauma to the craniovertebral junction for surgery, the degree of risk should be taken into account. Despite the high complication rate which was over 50 %, presented technique was effective because 95% patient achieved bone fusion and stability C0-C1-C2 complex.

Anatomy of the dens and its implications for fracture treatment: an anatomical and radiological study.

PURPOSE: The most common injuries to the upper cervical spine are fractures of the dens axis. Therefore, the purpose of our study was to answer three questions, namely (1) whether the size of the dens is adequate at all levels to accommodate two screws, (2) what the angle of the posterior tilt of the dens is in a healthy individual and (3) compare the measured variables between the sexes. METHODS: The cohort comprised 50 males and 50 females CT examination of the craniocervical junction. We measured the five diameters of the dens and posterior dens angulation angle (PDAA) and screw insertion angle (SIA). The same dimensions were measured in a control group, consisting of 40 non-pathological second cervical vertebrae specimens. RESULTS: On CT scans, the mean PDAA was 162.7 degrees in males and 160.26 degrees in females; the mean SIA was 62.0 degrees in males and 60.2 degrees in females. On specimens, the mean PDAA was 169.47 degrees in males and 166.95 degrees in females; the mean SIA was 65.42 degrees in males and 64.47 degrees in females. All obtained values were higher in males; regardless of their measuring on either CT scans or specimens, differences between males and females were statistically significant (p < 0.05) in a, c, d and e values. CONCLUSIONS: The values of our measurements correlate with the dimensions identified previously in other studies. Based on our clinical experience and measurements, we presume that two 3.5-mm screws can be inserted into the dens of all adult patients, except for those with pronounced anatomical anomalies. Posterior dens angulation angle is slightly larger than we expected. The dens is significantly larger in males almost in all measurement. These slides can be retrieved under Electronic Supplementary Material.

Anterior transarticular C1-C2 fixation with contralateral screw insertion: a report of two cases and technical note.

PURPOSE: Anterior transarticular fixation of the C1-C2 vertebrae is a well-known technique that involves screw insertion through the body of the C2 vertebra into the lateral masses of the atlas through an anterior transcervical approach. Meanwhile, contralateral screw insertion has been previously described only in anatomical studies. METHODS: We describe two case reports of the clinical application of this new technique. RESULTS: In Case 1, the patient was diagnosed with an unstable C1 fracture. The clinical features of the case did not allow for any type of posterior atlantoaxial fusion, Halo immobilization, or routine anterior fixation using the Reindl and Koller techniques. The possible manner of screw insertion into the anterior third of the right lateral mass was via a contralateral trajectory, which was performed in this case. Case 2 involved a patient with neglected posteriorly dislocated dens fracture who could not lie in the prone position due to concomitant cardiac pathology. Reduction of atlantoaxial dislocation was insufficient, even after scar tissue resection at the fracture, while transdental fusion was not possible. Considering the success of the previous case, atlantoaxial fixation was performed through the small approach, using the Reindl technique and contralateral screw insertion. CONCLUSIONS: These two cases demonstrate the potential of anterior transarticular fixation of C1-C2 vertebrae in cases where posterior atlantoaxial fusion is not achievable. This type of fixation can be performed through a single approach if one screw is inserted using the Reindl technique and another is inserted via a contralateral trajectory.

[Management and outcome of type II fractures of the odontoid process]. / Therapiekonzept und Outcome bei Typ-II-Frakturen des Dens axis.

BACKGROUND: The most effective treatment of type II dens fractures according to Anderson and D'Alonzo remains controversial as there is no guidance on the choice of conservative or surgical therapy and if the anterior or the posterior approach is more advantageous. In 1993 Eysel and Roosen showed that the consolidation rate of type II odontoid fractures mostly depends on the morphology of the fracture and established a classification with corresponding treatment recommendations. OBJECTIVE: The investigation aimed at clarifying the outcome of type II dens fractures treated according to the recommendations of Eysel and Roosen. MATERIAL AND METHODS: Data of dens fractures from 72 patients were analyzed and categorized according to the Eysel and Roosen classification. Furthermore, the treatment was analyzed and the outcome was evaluated retrospectively using radiographs acquired during follow-up. RESULTS: The mean age of the 72 patients was 70.7 years. Of the patients 19.4% suffered from type A, 75% from type B and 5.6% from type C fractures according to Eysel and Roosen. Out of the 72 patients 45 were assessed by computed tomography (CT) scan during follow-up. According to the recommendations of the authors 34 of the 41 patients with type A or type B fractures underwent anterior screw fixation of the dens and 3 out of the 4 patients with a type C fracture underwent a dorsal C1 and C2 fusion. After a mean follow-up of 7 months non-union was observed in 15.6% of the patients whereby 6 of the these patients were treated by surgery and 1 patient was managed conservatively. All of the patients who developed a non-union had a type B fracture. CONCLUSION: The simple clinical applicability together with the low rate of non-union development shows that the Eysel and Roosen classification appears to be a suitable guide for clinical use when deciding on the appropriate treatment regimen.

Development of a Predictive Model for Persistent Instability Following Conservative Management of Type II Odontoid Fractures.

BACKGROUND: Odontoid fractures are common cervical spine fractures; however, significant controversy exists regarding their treatment. Risk factors for failure of conservative therapy have been identified, although no predictive risk score has been developed to aid in decision-making. METHODS: A retrospective review was conducted of all patients evaluated at a level 1 trauma center. Patients identified with type II odontoid fractures as classified by the D'Alonzo Classification system who were treated with external orthosis were included in analysis. Patients were considered to have failed conservative therapy if they were offered surgical intervention. A machine learning method (Risk-SLIM) was then utilized to create a risk stratification score based on risk factors to identify patients at high risk for requiring surgical intervention due to persistent instability. RESULTS: A total of 138 patients were identified as presenting with type II odontoid fractures that were treated conservatively; 38 patients were offered surgery for persistent instability. The Odontoid Fracture Predictive Model (OFPM) was created using a machine learning algorithm with a 5-fold cross validation area under the curve of 0.7389 (95% CI: 0.671 to 0.808). Predictive factors were found to include fracture displacement, displacement greater than 5 mm, comminution at the fracture base, and history of smoking. The probability of persistent instability was <5% with a score of 0 and 88% with a score of 5. CONCLUSIONS: The OFPM model is a unique, quick, and accurate tool to assist in clinical decision-making in patients with type II odontoid fractures. External validation is necessary to evaluate the validity of these findings.

Odontoid fractures above C2 to pelvis posterior instrumented fusions: a single center's 11-year experience.

PURPOSE: To define the prevalence, characteristics, and treatment approach for proximal junction failure secondary to odontoid fractures in patients with prior C2-pelvis posterior instrumented fusions (PSF). METHODS: A single institution's database was queried for multi-level fusions (6+ levels), including a cervical component. Posterior instrumentation from C2-pelvis and minimum 6-month follow-up was inclusion criteria. Patients who sustained dens fractures were identified; each fracture was subdivided based on Anderson & D'Alonzo and Grauer's classifications. Comparisons between the groups were performed using Chi-square and T tests. RESULTS: 80 patients (71.3% female; average age 68.1 ± 8.1 years; 45.0% osteoporosis) were included. Average follow-up was 59.8 ± 42.7 months. Six patients (7.5%) suffered an odontoid fracture post-operatively. Cause of fracture in all patients was a mechanical fall. Average time to fracture was 23 ± 23.1 months. Average follow-up after initiation of fracture management was 5.84 ± 4 years (minimum 1 year). Three patients sustained type IIA fractures one of which had a concomitant unilateral C2 pars fracture. Three patients sustained comminuted type III fractures with concomitant unilateral C2 pars fractures. Initial treatment included operative care in 2 patients, and an attempt at non-operative care in 4. Non-operative care failed in 75% of patients who ultimately required revision with proximal extension. All patients with a concomitant pars fracture had failure of non-operative care. Patients with an intact pars were more stable, but 50% required revision for pain. CONCLUSIONS: In this 11-year experience at a single institution, the prevalence of odontoid fractures above a C2-pelvis PSF was 7.5%. Fracture morphology varied, but 50% were complex, comminuted C2 body fractures with concomitant pars fractures. While nonoperative management may be suitable for type II fractures with simple patterns, more complex and unstable fractures likely benefit from upfront surgical intervention to prevent fracture displacement and neural compression. As all fractures occurred secondary to a mechanical fall, inpatient and community measures aimed to minimize risk and prevent mechanical falls would be beneficial in this high-risk group.

Short-term and long-term results of odontoid screw fixation in patients with Type II and rostral Type III dens fractures.

OBJECTIVES: To evaluate both the short-term and long-term outcomes of odontoid screw fixation (OSF), identifying potential risk factors for implant-related complications in patients with odontoid fractures. METHODS: This is a retrospective observational cohort study. Inclusion criteria were as follows: 1) Type II fractures and rostral Type III fractures, according to the Anderson and D'Alonzo classification; 2) patients older than 15 years. Exclusion criteria were: 1) other Type III injuries; 2) osteoporosis confirmed by densitometry or a CT bone density score below 100 Hounsfield units; 3) odontoid fractures related to tumors or aneurysmal bone cysts. RESULTS: In total, 56 patients were considered for the analysis of short-term results, and 26 patients were evaluated for long-term outcomes. No significant differences were observed in the preoperative imaging data and intraoperative features of OSF between patients with Type II and rostral Type III fractures. The mean operative duration was 63.9 ± 20.9 min, and the mean intraoperative blood loss was 22.1 ± 22.9 ml. Screw cut-out was identified in four patients with rostral Type III fractures (p = 0.04). The rate of screw cut-out was found to correlate with the degree of dens fragment displacement. The bone fusion rate was 95.7%. CT scans identified stable pseudarthrosis in two cases. We observed C2-C3 ankylosis in all cases following partial disc resection. One third of patients with screws placed through the anterior lip of C2 showed no C2-C3 ankylosis. A strong trend towards lateral joint ankylosis formation in patients with a median lateral mass dislocation of 11.9 mm was observed. Most SF-36 scores either matched or exceeded the corresponding normal median values in the published reference database. CONCLUSIONS: OSF is a reliable treatment method of Type II and rostral Type III odontoid fractures with fragment displacement of 4 mm or less. The minimally invasive OSF through the anterior-inferior lip of C2, using monocortical screw placement and cannulated instruments, without rigid intraoperative head immobilization, is sufficient to achieve favorable clinical and fusion results. This technique reduces the risk of ankylosis in the C2-C3 segment. OSF restore the quality of life for patients with odontoid fractures to levels comparable to those of the general population norm.

Technique of Distraction, Compression, Extension, Reduction to Reduce and Realign Old Displaced Odontoid Fracture From Posterior Approach: A Novel Technique.

OBJECTIVE: Chronic 'displaced' displaced type II fractures, though uncommon, are difficult to manage. They usually require a transoral procedure followed by a posterior instrumented fusion. We describe here, a new method to reduce the fractured displaced odontoid using a posterior cervical approach only. METHODS: Prospective and observational, n = 14 had a 'displaced and irreducible' old fracture dens causing cord compression (type I, 1; type II, 13). They underwent a novel technique to reduce the fracture. The C1 arch was first drilled and removed. The C1 lateral masses on both sides were then drilled completely and a spacer was placed between the occiput and C2 facet. Following this, an intraoperative reducing maneuver was performed, utilizing the spacer as a fulcrum, and then achieving complete reduction and realignment. RESULTS: All patients improved clinically (mean Nurick preoperative score: 4.07 ± 0.8; the postoperative score was 1.3 ± 0.4). The mean correction in effective canal diameter was 74.3% ± 9.5% and the mean correction in actual canal diameter was 77% ± 8.7%. Solid bone fusion was demonstrated in 12 patients with at least 1-year follow-up (follow-up range, 12-35 months; mean, 21.8 ± 9.8 months). CONCLUSION: The new described modification of distraction, compression extension, and reduction seems to be effective for 'displaced' chronic fracture dens with cord compression. It avoids additional transoral surgery in these patients.

Outcomes following anterior odontoid screw versus posterior arthrodesis for odontoid fractures: a systematic review and meta-analysis.

OBJECTIVE: Odontoid fractures can be managed surgically when indicated. The most common approaches are anterior dens screw (ADS) fixation and posterior C1-C2 arthrodesis (PA). Each approach has theoretical advantages, but the optimal surgical approach remains controversial. The goal in this study was to systematically review the literature and synthesize outcomes including fusion rates, technical failures, reoperation, and 30-day mortality associated with ADS versus PA for odontoid fractures. METHODS: A systematic literature review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines by searching the PubMed, EMBASE, and Cochrane databases. A random-effects meta-analysis was performed and the I2 statistic was used to assess heterogeneity. RESULTS: In total, 22 studies comprising 963 patients (ADS 527, PA 436) were included. The average age of the patients ranged from 28 to 81.2 years across the included studies. The majority of the odontoid fractures were type II based on the Anderson-D'Alonzo classification. The ADS group was associated with statistically significantly lower odds to achieve bony fusion at last follow-up compared to the PA group (ADS 84.1%; PA 92.3%; OR 0.46; 95% CI 0.23-0.91; I2 42.6%). The ADS group was associated with statistically significantly higher odds of reoperation compared to the PA group (ADS 12.4%; PA 5.2%; OR 2.56; 95% CI 1.50-4.35; I2 0%). The rates of technical failure (ADS 2.3%; PA 1.1%; OR 1.11; 95% CI 0.52-2.37; I2 0%) and all-cause mortality (ADS 6%; PA 4.8%; OR 1.35; 95% CI 0.67-2.74; I2 0%) were similar between the two groups. In the subgroup analysis of patients > 60 years old, the ADS was associated with statistically significantly lower odds of fusion compared to the PA group (ADS 72.4%; PA 89.9%; OR 0.24; 95% CI 0.06-0.91; I2 58.7%). CONCLUSIONS: ADS fixation is associated with statistically significantly lower odds of fusion at last follow-up and higher odds of reoperation compared to PA. No differences were identified in the rates of technical failure and all-cause mortality. Patients receiving ADS fixation at > 60 years old had significantly higher and lower odds of reoperation and fusion, respectively, compared to the PA group. PA is preferred to ADS fixation for odontoid fractures, with a stronger effect size for patients > 60 years old.

Case of pedicle lag screw fixation for oblique axis body and pars fractures with displacement.

Background: Multiple axis fractures with instability are rare and appropriate treatment modalities have not been established. Case Description: A 33-year-old male presented with severe neck pain, bilateral upper-extremity numbness, and brisk reflexes in both lower extremities of 14 days' duration after a car accident. The cervical CT revealed an oblique C2 body fracture and asymmetrical neural ring fractures, while the MRI showed a normal C2-3 disk. As traction failed to reduce the fracture, the patient underwent an anterior retropharyngeal approach to release the fracture fragments, followed by posteriorly passing bilateral C2 pedicle lag screws. Eight months later, the patient exhibited full range of motion across the C1-2 level with fusion of the previously noted fractures. Conclusion: A 33-year-old male with an unstable C2 body fracture and asymmetrical neural ring fractures successfully underwent an anterior retropharyngeal approach to release the fracture fragments, followed by posteriorly passing bilateral C2 pedicle lag screws to achieve stability/fusion.

Posterior Cervical Fusion of Occiput-T3 for Unstable Complex Odontoid Fracture in an 80-Year-Old Male With C2-Sacrum Synostosis From Ankylosing Spondylitis: A Case Report.

Ankylosing spondylitis (AS) is an autoimmune arthritic condition that presents with inflammation of the axial skeleton and oligoarthritis of the peripheral joints. While its pathophysiology is not fully understood, the condition can lead to kyphosis and spontaneous intervertebral synostosis of the spine. AS is managed through both non-operative and operative means, but fractures in patients with AS are more complicated in those with synostosis. We present a case of a patient who is a tribal elder and Salish language instructor, with kyphotic AS with synostosis of C2-sacrum, and mobility confined to occiput-C1 and C1-C2. The patient suffered a low-energy fall backward from bed and presented to the orthopedic clinic approximately a month after his injury complaining of torticollis and neck pain. He was diagnosed to have a dens fracture, a right C2 pars/facet fracture, and a right lateral mass fracture with C1-C2 stenosis and cervical myelopathy. After the failure of conservative management, the patient required a full occiput-T3 fusion due to the osteoporosis and fragile AS synostosis of the spine, to mitigate transitional zone stresses that can occur with a shorter fusion. The fusion was successful, and it minimized the pain, corrected the torticollis, and allowed the patient to resume his tribal roles.

Vertical Fracture of the Odontoid Process.

Fractures of the odontoid process of the axis usually occur transversely at the neck or base of the odontoid, are often displaced, and frequently require surgical fixation. Sagittal or coronal fractures are uncommon and can best be visualized on coronal or sagittal reconstruction of CT scans. Routine radiographs may not allow precise diagnosis. Vertical fractures, either sagittal or coronal, generally do not require operative treatment. This report describes an unusual fracture of the odontoid process sustained by a 56-year-old male after falling down a flight of stairs. He was neurologically intact, and the fracture healed with immobilization in a rigid cervical brace. Only 11 other case reports have been identified in a literature review. Both coronal and sagittal reconstructions should be obtained in suspected cases of odontoid fracture. Without instability on flexion/extension views or ligamentous injury on an MRI scan, a rigid brace or halo vest can be used to promote healing of the fracture, which may occur in 12 weeks.

A possible novel technique for intraoperative imaging of the vertebral artery during arthrodesis of the upper cervical spine.

In elderly, the fractures in C1-C2 are a common entity. Poor bone quality and wide range of motion hamper the natural bone fusion, thus making surgery often the only possible way to deal with the underlying pathology. The proximity to important neurovascular structures represents the stabilization in this segment a challenge to the surgical team. There are two major techniques, which are used to achieve a dorsal fusion in the C1-C2 Segment: Goel/Harms and Magerl techniques. The reported risk for damaging the vertebral artery in both techniques lies between 8% and 9,5% using a C-Arm. In Goel/Harms technique lateral mass screws in C1 and pedicle screws in C2 are placed. A transarticular screw is placed on both sides C1-C2 in Magerl technique in order to achieve stabilization of the C1-C2 Segment. By using the new navigational methods for a better imaging of the bony structures (O-Arm), this risk could be reduced further down. The risk for injury of the vertebral artery using the O-Arm navigation depends on the pathology, which is operated, ranging from 0, 3% to 2%. A further problem represents the anatomical variations of the vertebral artery, of which the high-riding vertebral artery being the most important one, reported between 10 and 14,5% of the cases according to the literature review. The novel technique for intraoperative imaging of the vertebral artery represents a fusion between an intraoperative O-Arm and intraoperative application of contrast, thus intraoperatively seeing the exact way of the vertebral artery. Also, after the insertion of the screws, a second CT scan with the O-Arm could be performed, yet again with contrast, to see whether the perfusion of both vertebral arteries is preserved. The significance of this method could bring the injuries of the vertebral artery to 0% independently on the technique, which has been used. This method could be used not only for craniocervical stabilization but also for removal of complex tumors in craniocervical junctions, whereas the vertebral artery is encompassed.

[One stage temporary atlantoaxial segmental fixation and reduction for Grauer type IIB dens fractures in teenagers].

OBJECTIVE: To assess the clinical results of one stage temporary atlantoaxial segmental fixation and reduction for Grauer type IIB dens fractures in teenagers. METHODS: From February 2009 to April 2015, 19 teenagers with Grauer type IIB dens fractures not amenable to anteiror screw fixation were enrolled and treated using one stage temporary atlantoaxial segmental fixation and reduction without fusion. There were 14 males and 5 females, aged from 14 to 32 years with an average of (24.6±5.0 ) years. The internal fixation was removed after bone healing confirmed by CT scan. At the last follow-up (at least 1 year after internal fixation removal), dynamic CT was used to assess the atlantoaxial rotation activity. Visual analogue scale (VAS) was recorded before the first operation, before the second operation (removal of internal fixation) and at the last follow-up. Neck Disability Index(NDI) was used to evaluate the efficacy before the second operation (removal of internal fixation) and the last follow-up. RESULTS: After operation, 2 patients developed the symptoms of occipital nerve stimulation such as numbness and pain in the occipitocervical region, and were treated with drugs such as dehydration and neurotrophic drugs, and the symptoms were relieved after 1 to 2 months. All the internal fixations were removed and all the patients were followed up more than 1 year, with time ranging from 18 to 25 months and an average of (21.47±2.41) months. The time of bone fusion after operation was 6 to 10 months with the mean of(8.21±1.27) months. Secondary surgical removal of internal fixation were performed immediately after fracture healing without internal fixation failure. The symptoms of neck pain improved significantly after operation, VAS score decreased from 6.74±0.65 before operation to 0.42±0.51 at the last follow-up after the second operation (removal of internal fixation), with statistically significant differences(P<0.01). The NDI value decreased from (10.58±2.04)% before the second operation (removal of internal fixation) to (3.79±2.23)% at the last follow-up after the second operation (removal of internal fixation), with statistically significant difference(P<0.01). At the last follow-up after the second operation (removal of internal fixation), dynamic CT showed that the unilateral rotation of the atlantoaxial spine reached (15.73±5.57)° to the left, (15.55±5.78)° to the right, and the overall rotation of the atlantoaxial spine was (31.28±10.71)°. CONCLUSIONS: One stage temporary atlantoaxial segmental fixation and reduction for the treatment of Grauer type IIB dens fractures not amenable to anteiror screw fixation in teenagers can avoid the loss of atlantoaxial rotation function caused by atlantoaxial fusion, and to some extent retain the rotation activity of atlanto-axial joint.

Reliability of radiological measurements of type 2 odontoid fracture.

BACKGROUND CONTEXT: It is recognized that radiological parameters of type 2 dens fractures, including displacement and angulation, are predictive of treatment outcomes and are used to guide surgical decision-making. The reproducibility of such measurements, therefore, is of critical importance. Past literature has shown poor interobserver reliability for both displacement and angulation measurements of type 2 dens fractures. Since such studies however, various advancements of radiological review systems and measurement tools have evolved to potentially improve such measurements. PURPOSE: To re-examine the inter-rater reliability of measuring displacement and angulation of type 2 dens fractures using modern radiological review systems. Besides quantitative measurements, the reliability of raters in identifying diagnostic classifications based on translational and angulational displacement was also examined. STUDY DESIGN: Radiographic measurement reliability and agreement study. PATIENT SAMPLE: Thirty-seven patients seen at a single institution between 2002 and 2017 with primary diagnosis of acute type 2 dens fracture with complete computed tomography (CT) imaging. OUTCOME MEASURES: Radiological measurements included displacement and angulation. Diagnostic classifications based on consensus-based clinical cutoff points were also recorded. METHODS: Measurements were performed by five surgeons with varying years of experience in spine surgery using the hospital's electronic medical record radiological measuring tools. The radiological measurements included displacement and angulation. Diagnostic classifications based on consensus-based clinical cutoff points were also recorded. Each rater received a graphic demonstration of the measurement methods, but had the autonomy to select a best cut from the sagittal CT to measure. All raters were blinded to patient information. RESULTS: Measurements for displacement and angulation among the five raters demonstrated "excellent" reliability. Intra-rater reliability was also "excellent" in measuring displacement and angulation. The reliability of diagnostic classification of displacement (above vs. below 5 mm), was found to be "very good" among the raters. The reliability of diagnostic classification of angulation (above vs. below 11°) demonstrated "good" reliability. CONCLUSIONS: Advancement of radiological review systems, including review tools and embedded image processing software, has facilitated more reliable measurements for type 2 odontoid fractures.

Incidence of dysphagia after odontoid screw fixation of type II odontoid fracture in the elderly.

BACKGROUND: Although surgery may reduce mortality rates from type II odontoid fractures in the elderly population, post-operative dysphagia resulting from screw fixation remains a serious complication. METHODS: We retrospectively performed a chart review of patients over 65 years of age who underwent odontoid screw placement for type II odontoid fractures (2009-2014) and sustained post-operative dysphagia. The severity of dysphagia was determined based on the requirements for modified diets, PEG tubes, and prolonged length of stay (LOS), while costs were based upon discharge disposition (e.g. home vs. rehabilitation facilities) and total hospital costs. RESULTS: The incidence of postoperative dysphagia was 80%; 33% required feeding tubes, and 35% warranted PEG placement. The mean LOS for patients with dysphagia was 5 days longer and the total hospital costs averaged $50,000 higher. CONCLUSIONS: Age over 65 is a significant predictor of post-operative dysphagia in patients undergoing type II odontoid screw fixation. Notably, with each additional year above 65, the likelihood of post-operative dysphagia increased by 12%. Furthermore, postoperative dysphagia statistically increased the LOS and total costs.

Clinical and radiological union rate evaluation of type 2 odontoid fractures: A comparison between anterior screw fixation and halo vest in elderly patients.

PURPOSE: Odontoid fracture is a very common cervical injury, especially in elderly patients. Despite the high frequency, the appropriate management is still debated. The aim of this study is to evaluate clinical and radiological outcomes after anterior screw fixation or halo vest (HV) in type II odontoid fracture in elderly patients. MATERIALS AND METHODS: Between January 2013 and December 2015, 135 consecutive patients affected by odontoid process were found. According to inclusion and exclusion criteria, 57 patients were included in the study. Patients were evaluated with visual analog scale (VAS), Smiley-Webster Scale (SWS), Italian Version of the Neck Disability Index (NDI), and patient satisfaction during follow-up. Furthermore, radiological data were evaluated for bone healing. Student's t-test or Fisher's exact test was used between groups, analyzing radiological and clinical results, and level of statistical significance was set at P < 0.05. RESULTS: Seventeen patients were female and 40 were male. Twenty-seven patients were included in surgical group (SG) while 30 were included in HV group with a mean follow-up of 37.74 ± 10.52 months. A significant difference (P < 0.05) between groups was found for pseudoarthrosis, with a lower rate for SG. No significant differences in term of VAS, NDI, and SWS were found between groups (P > 0.05); SG reached higher satisfaction than HV group (P = 0.0271). CONCLUSIONS: Both treatments are equivalent in terms of clinical outcomes, and they are a valuable choice in the management of type II odontoid fracture. However, it must be considered that patients could slightly tolerate HV and may need a change of treatment.

A Cohort Study of the Natural History of Odontoid Pseudoarthrosis Managed Nonoperatively in Elderly Patients.

OBJECTIVE: Although the primary goal of treatment of type II odontoid fracture is bony union, some advocate continued nonsurgical management of minimally symptomatic older patients who have fibrous union or minimal fracture motion. The risk of this strategy is unknown. We reviewed our long-term outcomes after dens nonunion to define the natural history of Type II odontoid fractures in elderly patients managed nonoperatively. METHODS: A retrospective chart review of 50 consecutive adults aged 65 or older with Type II odontoid fracture initially managed nonsurgically from 1998 to 2012 at a single tertiary care institution was conducted. Particular attention was paid to patients who had orthosis removal despite absent bony fusion. Patients were contacted prospectively by telephone and followed until death, surgical intervention, or last known contact. RESULTS: Fifty patients initially were managed nonsurgically; of these, 21 (42.0%) proceeded to bony fusion, 3 (6%) underwent delayed surgery for persistent instability, and 26 (52%) had orthosis removal despite the lack of solid arthrodesis on imaging. The last group had a median follow-up of 25 months (range 4-158 months), with 20 of 26 (76.9%) followed until death. Of these patients, 1 patient developed progressive quadriplegia and dysphagia 11 months after initial injury. Compared with patients with spontaneous union, patients with nonunion had shorter life expectancy, despite no significant differences between the groups with respect to age, sex, injury mechanism, radiographic variables, or follow-up duration. CONCLUSIONS: Orthosis removal despite fracture nonunion may be reasonable in elderly patients with Type II dens fractures.

Short-Term Complications of Anterior Fixation of Odontoid Fractures.

STUDY DESIGN: Retrospective study. OBJECTIVE: Anterior fixation of odontoid fracture has been associated with high morbidity and mortality in small, single institution series. Identifying risk factors may improve risk stratification and highlight factors that could be optimized preoperatively. The objective of this study was to determine the 30-day complication rate following anterior fixation of odontoid fractures and to identify associated risk factors among patients in a large national database. METHODS: Patients who underwent anterior fixation were identified in the American College of Surgeons National Quality Improvement Program database (ACS NSQIP) from 2007 to 2012. Patient demographics, medical comorbidities, perioperative complications, and postoperative complications up to 30 days were analyzed by univariate and multivariate analysis. RESULTS: Overall, 103 patients met criteria for the study. The average age was 73.9 years and patients were predominantly white (85.4%). Cardiac comorbidity was common (66.0%), as were dependent functional status (14.6%) and bleeding disorders (13.6%). Complications occurred in 37.9% of patients, and mortality was high (6.8%). Age, white race, and history of bleeding disorders were independently predictive of complications in the multivariate analysis. The postoperative hospital stay was >5 days for 45.6% of patients. CONCLUSION: In a large, multicenter database study, anterior fixation of odontoid fracture was associated with high morbidity and mortality. Although advanced age was associated with increased risk of complications, patients undergoing anterior fixation were older, on average, than in prior studies. Bleeding disorder was a potentially modifiable risk factor for complications that could be optimized prior to surgery.