S100a6 knockdown promotes the differentiation of dental epithelial cells toward the epidermal lineage instead of the odontogenic lineage.

Tooth development is a complex process involving various signaling pathways and genes. Recent findings suggest that ion channels and transporters, including the S100 family of calcium-binding proteins, may be involved in tooth formation. However, our knowledge in this regard is limited. Therefore, this study aimed to investigate the expression of S100 family members and their functions during tooth formation. Tooth germs were extracted from the embryonic and post-natal mice and the expression of S100a6 was examined. Additionally, the effects of S100a6 knockdown and calcium treatment on S100a6 expression and the proliferation of SF2 cells were examined. Microarrays and single-cell RNA-sequencing indicated that S100a6 was highly expressed in ameloblasts. Immunostaining of mouse tooth germs showed that S100a6 was expressed in ameloblasts but not in the undifferentiated dental epithelium. Additionally, S100a6 was localized to the calcification-forming side in enamel-forming ameloblasts. Moreover, siRNA-mediated S100a6 knockdown in ameloblasts reduced intracellular calcium concentration and the expression of ameloblast marker genes, indicating that S100a6 is associated with ameloblast differentiation. Furthermore, S100a6 knockdown inhibited the ERK/PI3K signaling pathway, suppressed ameloblast proliferation, and promoted the differentiation of the dental epithelium toward epidermal lineage. Conclusively, S100a6 knockdown in the dental epithelium suppresses cell proliferation via calcium and intracellular signaling and promotes differentiation of the dental epithelium toward the epidermal lineage.

Automated High-Throughput Biological Sex Identification from Archeological Human Dental Enamel Using Targeted Proteomics.

Biological sex is key information for archeological and forensic studies, which can be determined by proteomics. However, the lack of a standardized approach for fast and accurate sex identification currently limits the reach of proteomics applications. Here, we introduce a streamlined mass spectrometry (MS)-based workflow for the determination of biological sex using human dental enamel. Our approach builds on a minimally invasive sampling strategy by acid etching, a rapid online liquid chromatography (LC) gradient coupled to a high-resolution parallel reaction monitoring (PRM) assay allowing for a throughput of 200 samples per day (SPD) with high quantitative performance enabling confident identification of both males and females. Additionally, we developed a streamlined data analysis pipeline and integrated it into a Shiny interface for ease of use. The method was first developed and optimized using modern teeth and then validated in an independent set of deciduous teeth of known sex. Finally, the assay was successfully applied to archeological material, enabling the analysis of over 300 individuals. We demonstrate unprecedented performance and scalability, speeding up MS analysis by 10-fold compared to conventional proteomics-based sex identification methods. This work paves the way for large-scale archeological or forensic studies enabling the investigation of entire populations rather than focusing on individual high-profile specimens. Data are available via ProteomeXchange with the identifier PXD049326.

Developmental Defects of Enamel: A Bibliometric Analysis of the Top 100 Most-Cited Papers.

BACKGROUND: Developmental defects of enamel (DDE) are a result of disturbances during formation and maturation of the enamel. Evaluating the most-cited DDE papers can provide important tools that point to the gaps and strengths of this important topic in dentistry. SUMMARY: This bibliometric study analyzed the 100 most-cited papers on DDE. Using a combined keyword search strategy, the 100 most-cited papers were selected in the Web of Science Core Collection. Papers that addressed any type of DDE were included. The extracted data were title, number of citations, study theme, authorship, journal, type of DDE, type of dentition (primary or permanent), type of diagnosis, study design, year, and country of publication. The bibliometric networks were generated through VOSviewer software. The 100 papers had a range from 78 to 459 citations. The main themes of studies were etiopathogenesis (53%), prevalence and incidence (22%), and diagnosis (8%). The authors with the highest number of citations were Goodman AH and Rose JC (459 citations). Most articles were published in dental journals (47%). The most studied types of DDE were fluorosis and amelogenesis imperfecta in the permanent dentition (47%). Observational (24%) and non-systematic reviews (24%) were the most common study designs and ranged from 1977 to 2019. The country with the highest number of publications was the USA (41%). KEY MESSAGES: Most of the top 100 DDE papers were about fluorosis and amelogenesis imperfecta, with top papers from three continents with English as the native language. This topic is of great importance in dentistry, and the need for further studies is highlighted, especially regarding the diagnosis and treatment of some DDEs.

Influence of using different toothpaste during bleaching with violet LED light (405 nm) on the colour and roughness of dental enamel: an in vitro study.

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

At-home bleaching with carbamide peroxide with concentrations below 10%: bleaching efficacy and permeability in the pulp chamber.

OBJECTIVES: To evaluate the bleaching efficacy and permeability of hydrogen peroxide (HP) in the pulp chamber of human teeth bleached with lower concentrations of carbamide peroxide gel (4%, 5% and 7% CP). MATERIALS AND METHODS: Bleaching gels with lower concentrations were formulated and a commercial standard gel, 10% CP, was used as a reference. Fifty-six human premolars were randomly divided into four groups. Applications of the bleaching gel were made for 3 h for 21 days. The bleaching efficacy was evaluated by digital spectrophotometry on 1, 7, 14 and 21 days, with analysis in the ∆Eab, ∆E00 and WID color spaces. The concentration of HP in the pulp chamber was measured in the same periods by UV-Vis spectrophotometry (µg/mL). Two-way repeated analysis of variance (ANOVA) examined bleaching efficacy and HP permeability, followed by Tukey's post-hoc test (α = 0.05). RESULTS: All groups showed significant color changes, with no statistical differences after the second and third week of bleaching (p > 0.05). The 'time' factor was statistically different (p < 0.05), increasing the bleaching efficacy throughout the treatment. The 4% CP group had lower HP levels in the pulp chamber (p < 0.05). CONCLUSIONS: The results seem promising, revealing that low concentration gels are as effective as 10% CP with the benefit of reducing the amount of HP in the pulp chamber. CLINICAL RELEVANCE: Low concentration 4% PC and 5% PC maintains bleaching efficacy, reduces the penetration of HP peroxide into the pulp chamber, and may reduce tooth sensitivity.

Whitening toothpastes with hydrogen peroxide concentrations vs. at-home bleaching.

OBJECTIVES: To evaluate the effect of whitening toothpastes with different hydrogen peroxide (HP) concentrations on HP permeability, color change, and physicochemical properties, compared to at-home bleaching treatment. MATERIALS AND METHODS: Forty-nine premolars were randomized into seven groups (n = 7): untreated (control); at-home bleaching with 10% carbamide peroxide gel (AH; 10% CP) with 14 and 28 applications of 180 min each (AH [14 × 180 min] and AH [28 × 180 min]); three whitening toothpastes (3% HP; 4% HP and 5% HP) and 10% CP brushed 28 times for 90 s each (TB [28 × 90 s]). HP permeability was measured using a UV-VIS spectrophotometer and color change by a digital spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through titration, digital pH meter, and rheometer, respectively. Statistical analysis included one-way ANOVA, Tukey's test, and Dunnett's test (α = 0.05). RESULTS: 4% HP group showed acidic pH, the lowest viscosity and the highest HP concentration into the pulp chamber (p < 0.05). The 10% CP groups had lower HP in the pulp chamber and greater color change than other groups (p < 0.05), except the 5% HP group in ΔEab and ΔE00. For ΔWID, the 10% CP AH groups showed greater whitening than other groups (p < 0.05). CONCLUSIONS: Whitening toothpaste with up to 5% HP resulted in higher HP permeability and less color change compared to 10% CP. Higher HP commercial concentrations in toothpaste increased whitening effect; however, acidic pH toothpastes exhibited greater HP permeability. CLINICAL RELEVANCE: Whitening toothpastes with high hydrogen peroxide concentrations were less effective than at-home bleaching, resulting in less color change and greater permeability of hydrogen peroxide, potentially increasing the risk of tooth sensitivity.

Cervical enamel projections from a periodontal perspective: A scoping review.

Cervical enamel projections (CEPs) represent a unique developmental and anatomical anomaly wherein the enamel structure extends apically beyond the cemento-enamel junction of the tooth. In this scoping review, the existing literature on CEPs was evaluated to delineate their characteristics, prevalence, predilection for specific teeth and surfaces, clinical significance, and management approaches. Searches were conducted on MEDLINE (PubMed), Cochrane Library, and Embase databases using the keywords "enamel projection(s)" or "ectopic enamel." In total, 24 studies meeting inclusion criteria were included in the review. The prevalence of CEPs varied widely (8.3%-85.1%), predominantly manifesting as grade I or grade III. Mandibular first and second molars exhibited a higher incidence of CEPs, with a notable predilection for buccal surfaces. The consensus in most studies was that CEPs are associated with localized periodontal diseases. Recommendations inclined toward the removal of ectopic enamel during periodontal surgery to enhance periodontal attachment formation. However, decision-making should involve careful consideration of the benefits and drawbacks based on individual circumstances.

Biomineralization and remineralizing potential of toothpastes containing nanosized ß-calcium glycerophosphate: an in vitro study.

To evaluate the effect of 1100 ppm F toothpastes supplemented with micrometric or nanosized ß-CaGP (ß-CaGPm/ß-CaGPn) on artificial enamel remineralization, using a pH cycling model. Enamel blocks with artificial caries were randomly allocated into ten groups (n = 10), according to the toothpastes: without fluoride/ß-CaGPm/ß-CaGPn (negative control); 1100 ppm F (1100F); 1100F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. The blocks were treated 2×/day with slurries of toothpastes. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); integrated mineral loss (ΔIMR); fluoride (F), calcium (Ca), and phosphorus (P) concentrations in the enamel; polydispersity index (PdI); and zeta potential (Zp) were determined. The data were analyzed by ANOVA (p < 0.001). For Zp/PdI, no significance was observed when comparing the means (p > 0.001). The treatment with 1100F-0.25%ß-CaGPn led to %SHR ∼57 higher when compared to the 1100F group (p < 0.001). The lowest ΔKHN was observed for the 1100F-0.25%ß-CaGPn group (p < 0.001). The ΔIMR was lower (∼201%) for the 1100F-0.25%ß-CaGPn when compared to 1100F (p < 0.001). The association of ß-CaGPm and ß-CaGPn to 1100F did not influence its F concentration (p > 0.001). The highest increase in Ca and P was observed for 1100F-0.25%ß-CaGPn (p < 0.001). The addition of 0.25%ß-CaGPn to 1100F toothpaste was able to promote an additional remineralizing effect of artificial caries lesions.

Effect of multi-layer applications of self-etch universal bonding agents on the adhesion of resin composite to enamel.

To evaluate the effect of adhesive coats application on the enamel microtensile bond strength (µTBS) of universal adhesives, morphological etching pattern and their chemical interaction with hydroxyapatite (HA). Two universal adhesives were investigated: Scotchbond Universal (SBU, 3 M) and Prime&Bond Universal (PBU, Dentsply). The adhesives were applied in self-etching mode on bovine enamel (n = 8) in one (1L), two (2L) or three coats (3L) and light-cured as per manufacturers' instructions. As controls adhesives were applied to etched enamel (H3PO4-37% phosphoric acid). Bonded specimens were cut into sticks that were stored in deionized water for 24 h or 6 months prior to µTBS testing. Two-way ANOVA and Tukey's test were used for statistical analysis of bond strength with α = 5%. For morphological SEM analysis, enamel surfaces were treated as aforementioned and immediately rinsed with acetone. The intensity of monomer-calcium salt formation from each treatment was measured via infrared spectroscopy (ATR-FTIR). All treatments presented no significant reduction on µTBS after aging (p > 0.05). However, SBU attained highest µTBS when applied in 3L. PBU showed higher µTBS when applied to H3PO4 etched enamel than 1L or 2L. Etching pattern was enhanced by 3L application, particularly with PBU. Chemical interaction was notably higher for SBU than PBU, with no relevant differences with more layers or prior H3PO4-etching. The application of three adhesive coats of universal adhesives in self-etch mode using may enhance the bonding performance and etching pattern to enamel, surpassing the H3PO4-etched enamel bond for SBU. The chemical interaction with calcium from enamel is not affected by number of coats or prior phosphoric acid etching.

Effects of experimental in-office bleaching gels incorporated with co-doped titanium dioxide nanoparticles on dental enamel physical properties.

To evaluate the physical properties of enamel submitted to hydrogen peroxide (HP) incorporated with titanium dioxide nanoparticles (NP) co-doped with nitrogen and fluorine and irradiated with violet LED light (LT). Enamel-dentin disks were randomly allocated (T0) into groups, according to HP (HP6, HP15, or HP35) and NP (no NP, 5NP, or 10NP) concentrations, and irradiated or not with LT. A negative control (NC) group was set. After three bleaching sessions (T1, T2, and T3), specimens were stored in saliva for 14 days (T4). Enamel surface microhardness number (KHN), surface roughness (Ra), cross-sectional microhardness (ΔS), energy-dispersive spectroscopy (EDS), scanning electron (SEM), and polarized light (PLM) microscopies were performed. Surface KHN was significantly influenced by NP over time, independently of LT irradiation. At T3 and T4, gels with 5NP and 10NP exhibited no KHN differences compared to NC and baseline values, which were not observed under the absence of NP. NP incorporation did not statistically interfere with the ΔS and Ra. PLM images exhibited surface/subsurface darkening areas suggestive of demineralizing regions. SEM demonstrated some intraprismatic affection in the groups without NP. EDS reported a higher enamel calcium to phosphorus ratio following 10NP gels applications. Gels with NP maintained the enamel surface microhardness levels and seemed to control surface morphology, upholding the mineral content. None of the proposed experimental protocols have negatively influenced the enamel surface roughness and the cross-sectional microhardness.

Effect of incorporation of calcium polyphosphate sub-microparticles in low-concentration bleaching gels on physical properties of dental enamel.

AIM: To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs). METHODS: A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test. RESULTS: The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05). CONCLUSION: The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.

Diagnostic accuracy of clinical signs to detect erosive tooth wear in its early phase.

BACKGROUND: Agreement exists about most of the clinical features of erosive tooth wear, though no evidence supports their validity in diagnosing the condition. OBJECTIVE: This study aimed to determine the accuracy of clinical signs for diagnosing erosive tooth wear in a young adult general population. METHODS: We conducted a cross-sectional study of dental students. In the first session, two examiners independently determined the presence of erosive tooth wear based on glazed enamel surfaces, morphological changes on non-occlusal surfaces, flattening of convex areas, or any type of concavity. In the second session, one examiner recorded the presence of clinical signs according to the Tooth Wear Evaluation System. The diagnostic accuracy of each clinical sign, both alone and combined, was assessed by calculating their sensitivity and specificity for detecting erosive tooth wear and performing multivariate logistic regression models. RESULTS: Of the 147 participants (78 women and 69 men; median age, 22 years) we included, 76.2% had erosive tooth wear. The single clinical signs with greatest balance between the sensitivity and specificity were 'convex areas flatten' (63% and 71%, respectively) and 'dull surface' (47% and 89%, respectively). Multivariate logistic regression revealed that 'preservation of the enamel cuff' (odds ratio, 22) and the combination of 'smooth silky shining, silky glazed appearance, and dull surface' (odds ratio, 68) had the best predictive values. CONCLUSIONS: The most accurate clinical signs for detecting early erosive tooth wear were dull surface, flattened convex areas and preservation of the enamel cuff.

Development of toothpaste formulations containing mineral clays as abrasive agents and their effects on the physical properties of dental enamel.

To assess the physical properties and topographical aspect of dental enamel's surface microhardness (KHN), surface roughness (Ra), and color parameters CIELAB (∆Eab*), CIEDE 2000 (∆E00), and whiteness index for dentistry (∆WID) after toothbrushing with experimental toothpaste formulations with the following mineral clay types: kaolin, Sparclay SGY, and Tersil CGY used as abrasive component. Scanning electron microscopy (SEM) was performed for topographical analyses purposes. A total of 96 bovine incisors were used in the experiment. They were divided into eight experimental groups (n = 12), namely: NC-negative control (no treatment), CT12-Colgate Total 12®, CMP-Colgate® Máxima Proteção Anticáries, K-kaolin experimental toothpaste, SGY-Sparclay SGY experimental toothpaste; CGY-Tersil CGY experimental toothpaste, SD-SiO2 experimental toothpaste, and CC-CaCO3 experimental toothpaste. All samples were subjected to mechanical brushing protocol with 5000 cycles and kept in artificial saliva with daily exchanges. KHN was analyzed through the mixed linear model for repeated measures over time. Ra was analyzed through nonparametric Kruskal Wallis and Dunn tests to compare the groups. Paired Wilcoxon test was run to compare experimental times. ∆WID, ∆Eab*, and ∆E00 were analyzed through Kruskal Wallis and Dunn tests. All analyses were performed in R* software, at 5% significance level. EXP_SGY recorded higher KHN than EXP_SiO2 and EXP_CaCO3, whereas EXP_K showed increased Ra in comparison to CMP (p = 0.0229). ∆Eab and ∆E00 were significantly higher in the CT12, EXP_SiO2, and EXP_CaCO3 groups than in the NC and EXP_K (p < 0.0001). There were no significant changes in ∆WID (p = 0.0852). According to SEM results, toothbrushing with experimental toothpastes added with mineral clay types did not have significant impact on enamel's polishing and smoothness. CLINICAL RELEVANCE: Mineral clays have a broad application in the cosmetic industry, and recently, they have been used in the formulation of vegan toothpaste.

In vitro evaluation of the effect of different bleaching varnishes: Hydrogen peroxide penetration into the pulp chamber and color change.

OBJECTIVE: To evaluate the penetration of hydrogen peroxide (HP) into the pulp chamber and the color change of different bleaching varnishes in low concentrations used for at-home bleaching. MATERIALS AND METHODS: Ninety healthy premolars were used, randomly distributed into nine groups (n = 10) according to bleaching varnish (PL, PolaLuminate; VS, VivaStyle Paint On Plus; CA, Cavex Bite&White whitening pen and; AW AlignerWhite) and time (10 and 30 min), and a control group (no bleaching). The penetration of HP was evaluated by UV-Vis spectroscopy. To evaluate the color change (ΔEab , ΔE00 , ΔWID ) a digital spectrophotometer was used (α = 0.05). RESULTS: The AW group in 10 min and the control group showed similar and lower HP penetration in the pulp chamber when compared to the other groups (p = 0.003). Increasing the application time to 30 minutes elevated the amount of HP inside the pulp chamber for all groups (p = 0.003), except for PL (p > 0.05). When applied for 30 min all bleaching varnishes showed higher color change (ΔWID ) when compared to 10 min (p = 0.04). CONCLUSIONS: For all bleaching varnishes evaluated, PolaLuminate applied for 30 min showed lower penetration into the pulp chamber and higher bleaching effects. CLINICAL SIGNIFICANCE: The use of bleaching varnishes seems promising for teeth bleaching, but it varies according to user product and protocol.

Evaluation of hydrogen peroxide permeability, color change, and physical-chemical properties on the in-office dental bleaching with different mixing tip.

OBJECTIVE: This study aims to assess hydrogen peroxide (HP) penetration into the pulp chamber, color change (CC), physical-chemical properties, and material wastage (MW) and material used (MU) in mixing tips when using in-office bleaching gels with two different mixing tips. MATERIALS AND METHODS: Forty teeth were divided into five groups (n = 8) based on the bleaching gels used (Pola Office +37.5% [PO+] and Whiteness HP Automixx Plus 35% [AM+]) and the mixing tip types (T-Mixer and Helical). A negative control group was treated with ultra-purified water. HP concentration was measured using UV-Vis, and CC was evaluated with a digital spectrophotometer. Initial concentration, pH, and viscosity were measured through Titration, a Digital pH meter, and Rheometer, respectively. MW and MU were measured using a precise analytical balance. Statistical analysis included two-way ANOVA, Tukey's, and Dunnett's test (α = 0.05). RESULTS: A higher HP concentration was observed with PO+ with the Helical mixing tip in comparison with AM+ (p = 0.01). No significant differences in CC or MU were found for different mixing tips (p = 0.001). The T-mixer mixing tip resulted in significantly less MW (p < 0.00001) and improved mixture homogeneity and viscosity. CONCLUSIONS: Utilizing a T-mixer with self-mixing bleaching gels achieves comparable CC while reducing MW. Moreover, it decreases HP penetration when using PO+. CLINICAL SIGNIFICANCE: For the application of a self-mixing in-office bleaching gel, a T-mixer mixing tip should be recommended, as it reduces the penetration of hydrogen peroxide into the pulp chamber when using PO+, while also minimizing gel wastage.

The capacity of conservative preparations for lithium disilicate glass-ceramic laminates luted with different resin cements to mask different substrate shades: A minimally invasive esthetic approach.

OBJECTIVE: Demonstrate the ability of 0.5 mm thickness lithium disilicate laminates associated with resin cement to mask different substrate saturations. METHODS: 60 specimens (n = 5) were prepared with CAD/CAM lithium disilicate glass-ceramic IPS e.max CAD, 0.5 mm thick, in three degrees of translucency (HT, MT and LT); cemented by Variolink Esthetic LC Light+ (L) and Neutral (N) on composite resin substrates A1 and A4 shades. Color measurements were performed by a spectrophotometer (CM-3700d -Konica Minolta). The L*, a*, b* parameters of the tri-layer structure (laminate/ resin cement/ substrate) were used to calculate color difference ( ∆ E 00 ) by CIEDE2000 formula and Translucency Parameter ( TP 00 ). This study adopted ∆ E 00 = 0.8, as perceptibility threshold (PT), and ∆ E 00 = 1.8, as acceptability threshold (AT). Statistical analyses were performed by one-way ANOVA and Tukey tests (a = 0.05). RESULTS: Color difference between resin cement shades showed statistical differences (p < 0.0001) and ∆ E 00 > 1.8 for all groups. Color difference between substrates saturations showed a significant statistical difference (p < 0.0001) and ∆ E 00 values above AT for all groups. The TP 00 demonstrated significant statistical differences (p < 0.0001). The LTL combination, the opaquest set, showed the smallest ∆ E 00 values between substrate shades differences, however, above AT. CONCLUSION: The translucency of the lithium disilicate, the substrate saturation and the resin cement opacity influenced final color of restoration. The ceramic translucency impact on final color was reduced by opaque resin cement. Furthermore, the LT lithium disilicate and the Light+ resin cement reduced the translucency of the restoration, contributing to mask saturated substrate. CLINICAL RELEVANCE: This study shows the influence of conservative lithium disilicate laminates with different degrees of translucency associated with resin cement on final color of saturated substrate restorations. A minimally invasive esthetic protocol for masking substrates is demonstrated by associating low translucency ceramic laminates and opaque resin cement.

Evaluation of Enamel Surface Properties Submitted to Bleaching With 35% Hydrogen Peroxide Associated With Titanium Tetrafluoride (TiF4).

OBJECTIVE: This study evaluated the color change, surface roughness, mineral content and morphology of enamel bleached with 35% hydrogen peroxide (HP) combined with an experimental gel containing 1% titanium tetrafluoride (TiF4). MATERIALS AND METHODS: Bovine enamel blocks were treated with (n = 12): (TiF) experimental gel containing 1% TiF4, (HP) 35% HP, (HPT) 35% HP + 1% TiF4 and (CT) control. Bleaching with HP was performed in 3 sessions (3 × 15 min/applications). pH, colorimetric parameters, surface roughness, mineral content and enamel morphology were determined. The pH was evaluated for 45 min. The color parameters were determined before bleaching (T0), and 14 days elapsed from the last bleaching session (T4). Surface roughness was analyzed at T0 and immediately after last bleaching session (T3). Enamel mineral content and morphology were verified at T4. Data were statistically analyzed by one-way, two-way ANOVA and Kruskal-Wallis (α = 0.05). RESULTS: TiF increased surface roughness, and no differences between HP and HPT in terms of color and CO 3 2 - $$ {\mathrm{CO}}_3^{2-} $$ - PO 4 3 - $$ {\mathrm{PO}}_4^{3-} $$ mineral content. Ti was detected only on TiF, and slight surface morphology changes were observed in bleached enamel. CONCLUSIONS: The combination of TiF4 and 35% HP did not interfere with the enamel bleaching effect, controlled surface roughness, and kept mineral content but promoted a minor surface morphology alteration. CLINICAL SIGNIFICANCE: Due to the adverse effects of bleaching, titanium tetrafluoride (TiF4) has gained attention for its therapeutic properties, including the ability to reverse mineral loss and neutralize remineralization of mineral structures. Therefore, TiF4's remineralizing capacity may be a good alternative for incorporation into hydrogen peroxide bleaching agents.

Evaluating color change and hydrogen peroxide penetration in human and bovine teeth through in-office bleaching procedures.

OBJECTIVE: Assess color alteration and hydrogen peroxide (HP) penetration in human and bovine teeth using various in-office bleaching protocols with different application times. MATERIALS AND METHODS: Thirty healthy human premolars and 30 healthy bovine incisors were divided into five groups and subjected to different bleaching protocols: 2 × 15 min, 1 × 30 min, 2 × 20 min, or 1 × 40 min, with a control group for each tooth type. All teeth were treated with 35% HP gel. Color alteration was measured using digital spectrophotometry before and 1 week after bleaching. HP concentration within the pulp was determined via UV-Vis spectrophotometry. Statistical analysis included one-way ANOVA, Tukey's, and Dunnett's tests (α = 0.05). RESULTS: All groups exhibited significant color alteration, with no statistically differences among them (p > 0.05). However, significant differences were observed when compared with their respective control groups (p < 0.05). HP penetration into the pulp was evident in all bleached teeth compared to the control groups (p < 0.05), with the 2 × 20 group showing the highest HP levels within the pulp cavity, irrespective of tooth type (p < 0.05). CONCLUSION: A simplified 1 × 30-min protocol can be recommended as it effectively maintains color alteration and HP penetration, irrespective of whether human or bovine teeth. CLINICAL SIGNIFICANCE: This study suggests that an in-office dental bleaching protocol using a 1 × 30-min session is recommended, as it ensures both effective color change and no increase in the amount of HP penetration.

AMELX Mutations and Genotype-Phenotype Correlation in X-Linked Amelogenesis Imperfecta.

AMELX mutations cause X-linked amelogenesis imperfecta (AI), known as AI types IE, IIB, and IIC in Witkop's classification, characterized by hypoplastic (reduced thickness) and/or hypomaturation (reduced hardness) enamel defects. In this study, we conducted whole exome analyses to unravel the disease-causing mutations for six AI families. Splicing assays, immunoblotting, and quantitative RT-PCR were conducted to investigate the molecular and cellular effects of the mutations. Four AMELX pathogenic variants (NM_182680.1:c.2T>C; c.29T>C; c.77del; c.145-1G>A) and a whole gene deletion (NG_012494.2:g.307534_403773del) were identified. The affected individuals exhibited enamel malformations, ranging from thin, poorly mineralized enamel with a "snow-capped" appearance to severe hypoplastic defects with minimal enamel. The c.145-1G>A mutation caused a -1 frameshift (NP_001133.1:p.Val35Cysfs*5). Overexpression of c.2T>C and c.29T>C AMELX demonstrated that mutant amelogenin proteins failed to be secreted, causing elevated endoplasmic reticulum stress and potential cell apoptosis. This study reveals a genotype-phenotype relationship for AMELX-associated AI: While amorphic mutations, including large deletions and 5' truncations, of AMELX cause hypoplastic-hypomaturation enamel with snow-capped teeth (AI types IIB and IIC) due to a complete loss of gene function, neomorphic variants, including signal peptide defects and 3' truncations, lead to severe hypoplastic/aplastic enamel (AI type IE) probably caused by "toxic" cellular effects of the mutant proteins.

Association between molar hypomineralization, genes involved in enamel development, and medication in early childhood: A preliminary study.

BACKGROUND: Molar hypomineralization (MH) is defined as a multifactorial condition, and thus, its presence may be defined by interactions between environmental and genetic factors. AIM: To evaluate the association between MH, genes involved in enamel development, and the use of medication during pregnancy in early childhood. DESIGN: One hundred and eighteen children, 54 with and 64 without MH, were studied. The data collected included demographics, socioeconomic data, and the medical history of mothers and children. Genomic DNA was collected from saliva. Genetic polymorphisms in ameloblastin (AMBN; rs4694075), enamelin (ENAM; rs3796704, rs7664896), and kallikrein (KLK4; rs2235091) were evaluated. These genes were analyzed by real-time polymerase chain reaction using TaqMan chemistry. The software PLINK was used to compare allele and genotype distributions of the groups and to assess the interaction between environmental variables and genotypes (p < .05). RESULTS: The variant allele KLK4 rs2235091 was associated with MH in some children (odds ratio [OR]: 3.75; 95% confidence interval [CI] = 1.65-7.81; p = .001). Taking medications in the first 4 years of life was also associated with MH (OR: 2.94; 95% CI = 1.02-6.04; p = .041) and specifically in association with polymorphisms in ENAM, AMBN, and KLK4 (p < .05). The use of medications during pregnancy was not associated with MH (OR: 1.37; 95% CI = 0.593-3.18; p = .458). CONCLUSION: The results of this study suggest that taking medication in the postnatal period appears to contribute to the etiology of MH in some evaluated children. There may be a possible genetic influence of polymorphisms in the KLK4 gene with this condition.