Detection and severity assessment of obstructive sleep apnea according to deep learning of single-lead electrocardiogram signals.

Developing a convenient detection method is important for diagnosing and treating obstructive sleep apnea. Considering availability and medical reliability, we established a deep-learning model that uses single-lead electrocardiogram signals for obstructive sleep apnea detection and severity assessment. The detection model consisted of signal preprocessing, feature extraction, time-frequency domain information fusion, and classification segments. A total of 375 patients who underwent polysomnography were included. The single-lead electrocardiogram signals obtained by polysomnography were used to train, validate and test the model. Moreover, the proposed model performance on a public dataset was compared with the findings of previous studies. In the test set, the accuracy of per-segment and per-recording detection were 82.55% and 85.33%, respectively. The accuracy values for mild, moderate and severe obstructive sleep apnea were 69.33%, 74.67% and 85.33%, respectively. In the public dataset, the accuracy of per-segment detection was 91.66%. A Bland-Altman plot revealed the consistency of true apnea-hypopnea index and predicted apnea-hypopnea index. We confirmed the feasibility of single-lead electrocardiogram signals and deep-learning model for obstructive sleep apnea detection and severity evaluation in both hospital and public datasets. The detection performance is high for patients with obstructive sleep apnea, especially those with severe obstructive sleep apnea.

Image-Acceleration Multimodal Danger Detection Model on Mobile Phone for Phone Addicts.

With the popularity of smartphones, a large number of "phubbers" have emerged who are engrossed in their phones regardless of the situation. In response to the potential dangers that phubbers face while traveling, this paper proposes a multimodal danger perception network model and early warning system for phubbers, designed for mobile devices. This proposed model consists of surrounding environment feature extraction, user behavior feature extraction, and multimodal feature fusion and recognition modules. The environmental feature module utilizes MobileNet as the backbone network to extract environmental description features from the rear-view image of the mobile phone. The behavior feature module uses acceleration time series as observation data, maps the acceleration observation data to a two-dimensional image space through GADFs (Gramian Angular Difference Fields), and extracts behavior description features through MobileNet, while utilizing statistical feature vectors to enhance the representation capability of behavioral features. Finally, in the recognition module, the environmental and behavioral characteristics are fused to output the type of hazardous state. Experiments indicate that the accuracy of the proposed model surpasses existing methods, and it possesses the advantages of compact model size (28.36 Mb) and fast execution speed (0.08 s), making it more suitable for deployment on mobile devices. Moreover, the developed image-acceleration multimodal phubber hazard recognition network combines the behavior of mobile phone users with surrounding environmental information, effectively identifying potential hazards for phubbers.

Convolutional neural network for detecting rib fractures on chest radiographs: a feasibility study.

BACKGROUND: Chest radiography is the standard investigation for identifying rib fractures. The application of artificial intelligence (AI) for detecting rib fractures on chest radiographs is limited by image quality control and multilesion screening. To our knowledge, few studies have developed and verified the performance of an AI model for detecting rib fractures by using multi-center radiographs. And existing studies using chest radiographs for multiple rib fracture detection have used more complex and slower detection algorithms, so we aimed to create a multiple rib fracture detection model by using a convolutional neural network (CNN), based on multi-center and quality-normalised chest radiographs. METHODS: A total of 1080 radiographs with rib fractures were obtained and randomly divided into the training set (918 radiographs, 85%) and the testing set (162 radiographs, 15%). An object detection CNN, You Only Look Once v3 (YOLOv3), was adopted to build the detection model. Receiver operating characteristic (ROC) and free-response ROC (FROC) were used to evaluate the model's performance. A joint testing group of 162 radiographs with rib fractures and 233 radiographs without rib fractures was used as the internal testing set. Furthermore, an additional 201 radiographs, 121 with rib fractures and 80 without rib fractures, were independently validated to compare the CNN model performance with the diagnostic efficiency of radiologists. RESULTS: The sensitivity of the model in the training and testing sets was 92.0% and 91.1%, respectively, and the precision was 68.0% and 81.6%, respectively. FROC in the testing set showed that the sensitivity for whole-lesion detection reached 91.3% when the false-positive of each case was 0.56. In the joint testing group, the case-level accuracy, sensitivity, specificity, and area under the curve were 85.1%, 93.2%, 79.4%, and 0.92, respectively. At the fracture level and the case level in the independent validation set, the accuracy and sensitivity of the CNN model were always higher or close to radiologists' readings. CONCLUSIONS: The CNN model, based on YOLOv3, was sensitive for detecting rib fractures on chest radiographs and showed great potential in the preliminary screening of rib fractures, which indicated that CNN can help reduce missed diagnoses and relieve radiologists' workload. In this study, we developed and verified the performance of a novel CNN model for rib fracture detection by using radiography.

Learning facilitates dual-process face recognition regardless of holistic processing.

Much evidence suggests that faces are recognized based on their global familiarity in a signal-detection manner. However, experiments drawing this conclusion typically present study lists of faces only once or twice, and the nature of face recognition at higher levels of learning remains unclear. Here, three experiments are reported in which participants studied some faces eight times and others twice and then took a recognition test containing previously viewed faces, entirely new faces, and faces which recombined the parts of previously viewed faces. Three measures converged to suggest that study list repetition increased the likelihood of participants rejecting recombined faces as new by recollecting that their parts were studied but in a different combination, and that manipulating holistic or Gestalt-like processing-a hallmark of face perception-qualitatively preserved its effect on how memory judgments are made. This suggests that face learning causes a shift from the use of a signal-detection strategy to the use of a dual-process strategy of face recognition regardless of holistic processing.

Developing a Colorimetric Equation and a Colorimetric Model to Create a Smartphone Application That Identifies the Ripening Stage of Lady Finger Bananas in Thailand.

This article develops a colorimetric equation and a colorimetric model to create a smartphone application that identifies the ripening stage of the lady finger banana (LFB) (Musa AA group 'Kluai Khai', กล้วยไข่ "gluay kai" in Thai). The mobile application photographs an LFB, automatically analyzes the color of the banana, and tells the user the number of days until the banana ripens and the number of days the banana will remain edible. The application is called the Automatic Banana Ripeness Indicator (ABRI, pronounced like "Aubrey"), and the rapid analysis that it provides is useful to anyone involved in the storage and distribution of bananas. The colorimetric equation interprets the skin color with the CIE L*a*b* color model in conjunction with the Pythagorean theorem. The colorimetric model has three parts. First, COCO-SSD object detection locates and identifies the banana in the image. Second, the Automatic Power-Law Transformation, developed here, adjusts the illumination to a standard derived from the average of a set of laboratory images. After removing the image background and converting the image to L*a*b*, the data are sent to the colorimetric equation to calculate the ripening stage. Results show that ABRI correctly detects a banana with 91.45% accuracy and the Automatic Power-Law Transformation correctly adjusts the image illumination with 95.72% accuracy. The colorimetric equation correctly identifies the ripening stage of all incoming images. ABRI is thus an accurate and robust tool that quickly, conveniently, and reliably provides the user with any LFB's ripening stage and the remaining days for consumption.

Research on the Efficiency of Bridge Crack Detection by Coupling Deep Learning Frameworks with Convolutional Neural Networks.

Bridge crack detection based on deep learning is a research area of great interest and difficulty in the field of bridge health detection. This study aimed to investigate the effectiveness of coupling a deep learning framework (DLF) with a convolutional neural network (CNN) for bridge crack detection. A dataset consisting of 2068 bridge crack images was randomly split into training, verification, and testing sets with a ratio of 8:1:1, respectively. Several CNN models, including Faster R-CNN, Single Shot MultiBox Detector (SSD), You Only Look Once (YOLO)-v5(x), U-Net, and Pyramid Scene Parsing Network (PSPNet), were used to conduct experiments using the PyTorch, TensorFlow2, and Keras frameworks. The experimental results show that the Harmonic Mean (F1) values of the detection results of the Faster R-CNN and SSD models under the Keras framework are relatively large (0.76 and 0.67, respectively, in the object detection model). The YOLO-v5(x) model of the TensorFlow2 framework achieved the highest F1 value of 0.67. In semantic segmentation models, the U-Net model achieved the highest detection result accuracy (AC) value of 98.37% under the PyTorch framework. The PSPNet model achieved the highest AC value of 97.86% under the TensorFlow2 framework. These experimental results provide optimal coupling efficiency parameters of a DLF and CNN for bridge crack detection. A more accurate and efficient DLF and CNN model for bridge crack detection has been obtained, which has significant practical application value.

Teeth Lesion Detection Using Deep Learning and the Internet of Things Post-COVID-19.

With a view of the post-COVID-19 world and probable future pandemics, this paper presents an Internet of Things (IoT)-based automated healthcare diagnosis model that employs a mixed approach using data augmentation, transfer learning, and deep learning techniques and does not require physical interaction between the patient and physician. Through a user-friendly graphic user interface and availability of suitable computing power on smart devices, the embedded artificial intelligence allows the proposed model to be effectively used by a layperson without the need for a dental expert by indicating any issues with the teeth and subsequent treatment options. The proposed method involves multiple processes, including data acquisition using IoT devices, data preprocessing, deep learning-based feature extraction, and classification through an unsupervised neural network. The dataset contains multiple periapical X-rays of five different types of lesions obtained through an IoT device mounted within the mouth guard. A pretrained AlexNet, a fast GPU implementation of a convolutional neural network (CNN), is fine-tuned using data augmentation and transfer learning and employed to extract the suitable feature set. The data augmentation avoids overtraining, whereas accuracy is improved by transfer learning. Later, support vector machine (SVM) and the K-nearest neighbors (KNN) classifiers are trained for lesion classification. It was found that the proposed automated model based on the AlexNet extraction mechanism followed by the SVM classifier achieved an accuracy of 98%, showing the effectiveness of the presented approach.

Hybrid high-definition microvessel imaging/shear wave elastography improves breast lesion characterization.

BACKGROUND: Low specificity in current breast imaging modalities leads to increased unnecessary follow-ups and biopsies. The purpose of this study is to evaluate the efficacy of combining the quantitative parameters of high-definition microvasculature imaging (HDMI) and 2D shear wave elastography (SWE) with clinical factors (lesion depth and age) for improving breast lesion differentiation. METHODS: In this prospective study, from June 2016 through April 2021, patients with breast lesions identified on diagnostic ultrasound and recommended for core needle biopsy were recruited. HDMI and SWE were conducted prior to biopsies. Two new HDMI parameters, Murray's deviation and bifurcation angle, and a new SWE parameter, mass characteristic frequency, were included for quantitative analysis. Lesion malignancy prediction models based on HDMI only, SWE only, the combination of HDMI and SWE, and the combination of HDMI, SWE and clinical factors were trained via elastic net logistic regression with 70% (360/514) randomly selected data and validated with the remaining 30% (154/514) data. Prediction performances in the validation test set were compared across models with respect to area under the ROC curve as well as sensitivity and specificity based on optimized threshold selection. RESULTS: A total of 508 participants (mean age, 54 years ± 15), including 507 female participants and 1 male participant, with 514 suspicious breast lesions (range, 4-72 mm, median size, 13 mm) were included. Of the lesions, 204 were malignant. The SWE-HDMI prediction model, combining quantitative parameters from SWE and HDMI, with AUC of 0.973 (95% CI 0.95-0.99), was significantly higher than the result predicted with the SWE model or HDMI model alone. With an optimal cutoff of 0.25 for the malignancy probability, the sensitivity and specificity were 95.5% and 89.7%, respectively. The specificity was further improved with the addition of clinical factors. The corresponding model defined as the SWE-HDMI-C prediction model had an AUC of 0.981 (95% CI 0.96-1.00). CONCLUSIONS: The SWE-HDMI-C detection model, a combination of SWE estimates, HDMI quantitative biomarkers and clinical factors, greatly improved the accuracy in breast lesion characterization.

Research on Deep Learning Automatic Vehicle Recognition Algorithm Based on RES-YOLO Model.

With the introduction of concepts such as ubiquitous mapping, mapping-related technologies are gradually applied in autonomous driving and target recognition. There are many problems in vision measurement and remote sensing, such as difficulty in automatic vehicle discrimination, high missing rates under multiple vehicle targets, and sensitivity to the external environment. This paper proposes an improved RES-YOLO detection algorithm to solve these problems and applies it to the automatic detection of vehicle targets. Specifically, this paper improves the detection effect of the traditional YOLO algorithm by selecting optimized feature networks and constructing adaptive loss functions. The BDD100K data set was used for training and verification. Additionally, the optimized YOLO deep learning vehicle detection model is obtained and compared with recent advanced target recognition algorithms. Experimental results show that the proposed algorithm can automatically identify multiple vehicle targets effectively and can significantly reduce missing and false rates, with the local optimal accuracy of up to 95% and the average accuracy above 86% under large data volume detection. The average accuracy of our algorithm is higher than all five other algorithms including the latest SSD and Faster-RCNN. In average accuracy, the RES-YOLO algorithm for small data volume and large data volume is 1.0% and 1.7% higher than the original YOLO. In addition, the training time is shortened by 7.3% compared with the original algorithm. The network is then tested with five types of local measured vehicle data sets and shows satisfactory recognition accuracy under different interference backgrounds. In short, the method in this paper can complete the task of vehicle target detection under different environmental interferences.

Rotating Single-Antenna Spoofing Signal Detection Method Based on IPNN.

The traditional carrier-phase differential detection technology mainly relies on the spatial processing method, which uses antenna arrays or moving antennas to detect spoofing signals, but it cannot be applied to static single-antenna receivers. Aiming at this problem, this paper proposes a rotating single-antenna spoofing signal detection method based on the improved probabilistic neural network (IPNN). When the receiver antenna rotates at a constant speed, the carrier-phase double difference of the real signal will change with the incident angle of the satellite. According to this feature, the classification and detection of spoofing signals can be realized. Firstly, the rotating single-antenna receiver collects carrier-phase values and performs double-difference processing. Then, we construct an IPNN model, whose smoothing factor can be adaptively adjusted according to the type of failure mode. Finally, we use the IPNN model to realize the classification and processing of the carrier-phase double-difference observations and obtain the deception detection results. In addition, in order to reflect that the method has a certain practical value, we simulate the spoofing scenario of satellite signals and effectively identify abnormal satellite signals according to the detection results of the inter-satellite differential combination. Actual experiments indicate that the detection accuracy of the proposed method for spoofing signals reaches 98.84%, which is significantly better than the classical probabilistic neural network (PNN) and back-propagation neural network (BPNN), and the method can be implemented in fixed base station receivers for the real-time detection of forwarding spoofing.

An Improved POD Model for Fast Semi-Quantitative Analysis of Carbendazim in Fruit by Surface Enhanced Raman Spectroscopy.

The current detection method of carbendazim suffers from the disadvantages of complicated preprocessing and long cycle time. In order to solve the problem of rapid quantitative screening of finite contaminants, this article proposed a qualitative method based on characteristic peaks and a semi-quantitative method based on threshold to detect carbendazim in apple, and finally the method is evaluated by a validation system based on binary output. The results showed that the detection limit for carbendazim was 0.5 mg/kg, and the detection probability was 100% when the concentration was no less than 1 mg/kg. The semi-quantitative analysis method had a false positive rate of 0% and 5% at 0.5 mg/kg and 2.5 mg/kg, respectively. The results of method evaluation showed that when the added concentration was greater than 2.5 mg/kg, the qualitative detection method was consistent with the reference method. When the concentration was no less than 5 mg/kg, the semi-quantitative method is consistent between different labs. The semi-quantitative method proposed in this study can achieve the screening of finite contaminants in blind samples and simplify the test validation process through the detection probability model, which can meet the needs of rapid on-site detection and has a good application prospect.

Mobile application using DCDM and cloud-based automatic plant disease detection.

Farming has a plethora of difficult responsibilities, and plant monitoring is one of them. There is also an urgent need to increase the number of alternative techniques for detecting plant diseases, which is now lacking. The agriculture and agricultural support sectors in India provide employment for the great majority of the country's people. In India, the agricultural production of the country is directly connected to the country's economic growth rate. In order to sustain healthy plant development, a variety of processes must be followed, including consideration of environmental factors and water supply management for the optimal production of crops. It is inefficient and uncertain in its outcomes to use the traditional method of watering a lawn. The devastation of more than 18% of the world's agricultural produce is caused by disease attacks on an annual basis. Because it is difficult to execute these activities manually, identifying plant diseases is essential to decreasing losses in the agricultural product business. In addition to diagnosing a wide range of plant ailments, our method also includes the identification of infections as a prophylactic step. Below is a detailed description of a farm-based module that includes numerous cloud data centers and data conversion devices for accurately monitoring and managing farm information and environmental elements. This procedure involves imaging the plant's visually obvious signs in order to identify disease. It is recommended that the therapy be used in conjunction with an application to minimize any harm. Increased productivity as a result of the suggested approach would help both the agricultural and irrigation sectors. The plant area module is fitted with a mobile camera that captures images of all of the plants in the area, and all of the plants' information is saved in a database, which is accessible from any computer with Internet access. It is planned to record information on the plant's name, the type of illness that has been afflicted, and an image of the plant. In a wide range of applications, bots are used to collect images of various plants as well as to prevent disease transmission. To ensure that all information given is retained on the Internet, data is collected and stored in cloud storage as it becomes essential to regulate the condition. According to our findings from our research on wide images of healthy and ill fruit and plant leaves, real-time diagnosis of plant leaf diseases may be done with 98.78% accuracy in a laboratory environment. We utilized 40,000 photographs and then analyzed 10,000 photos to construct a DCDM deep learning model, which was then used to train additional models on the data set. Using a cloud-based image diagnostic and classification service, consumers may receive information about their condition in less than a second on average, with the process requiring only 0.349 s on average.

Establishment of an optimized CTC detection model consisting of EpCAM, MUC1 and WT1 in epithelial ovarian cancer and its correlation with clinical characteristics.

Objective: Emerging studies have demonstrated the promising clinical value of circulating tumor cells (CTCs) for diagnosis, disease assessment, treatment monitoring and prognosis in epithelial ovarian cancer. However, the clinical application of CTC remains restricted due to diverse detection techniques with variable sensitivity and specificity and a lack of common standards. Methods: We enrolled 160 patients with epithelial ovarian cancer as the experimental group, and 90 patients including 50 patients with benign ovarian tumor and 40 healthy females as the control group. We enriched CTCs with immunomagnetic beads targeting two epithelial cell surface antigens (EpCAM and MUC1), and used multiple reverse transcription-polymerase chain reaction (RT-PCR) detecting three markers (EpCAM, MUC1 and WT1) for quantification. And then we used a binary logistic regression analysis and focused on EpCAM, MUC1 and WT1 to establish an optimized CTC detection model. Results: The sensitivity and specificity of the optimized model is 79.4% and 92.2%, respectively. The specificity of the CTC detection model is significantly higher than CA125 (92.2% vs. 82.2%, P=0.044), and the detection rate of CTCs was higher than the positive rate of CA125 (74.5% vs. 58.2%, P=0.069) in early-stage patients (stage I and II). The detection rate of CTCs was significantly higher in patients with ascitic volume ≥500 mL, suboptimal cytoreductive surgery and elevated serum CA125 level after 2 courses of chemotherapy (P<0.05). The detection rate of CTCEpCAM + and CTCMUC1+ was significantly higher in chemo-resistant patients (26.3% vs. 11.9%; 26.4% vs. 13.4%, P<0.05). The median progression-free survival time for CTCMUC1+ patients trended to be longer than CTCMUC1- patients, and overall survival was shorter in CTCMUC1+ patients (P=0.043). Conclusions: Our study presents an optimized detection model for CTCs, which consists of the expression levels of three markers (EpCAM, MUC1 and WT1). In comparison with CA125, our model has high specificity and demonstrates better diagnostic values, especially for early-stage ovarian cancer. Detection of CTCEpCAM+ and CTCMUC1+ had predictive value for chemotherapy resistance, and the detection of CTCMUC1+ suggested poor prognosis.

Multispecies models reveal that eDNA metabarcoding is more sensitive than backpack electrofishing for conducting fish surveys in freshwater streams.

Environmental DNA (eDNA) sampling can provide accurate, cost-effective, landscape-level data on species distributions. Previous studies have compared the sensitivity of eDNA sampling to traditional sampling methods for single species, but similar comparative studies on multispecies eDNA metabarcoding are rare. Using hierarchical site occupancy detection models, we examined whether key choices associated with eDNA metabarcoding (primer selection, low-abundance read filtering and the number of positive water samples used to classify a species as present at a site) affect the sensitivity of metabarcoding, relative to backpack electrofishing for fish in freshwater streams. Under all scenarios (teleostei and vertebrate primers; 0%, 0.1% and 1% read filtering thresholds; one or two positive samples required to classify species as present), we found that eDNA metabarcoding is, on average, more sensitive than electrofishing. Combining vertebrate and teleostei markers resulted in higher detection probabilities relative to the use of either marker in isolation. Increasing the threshold used to filter low-abundance reads decreased species detection probabilities but did not change our overall finding that eDNA metabarcoding was more sensitive than electrofishing. Using a threshold of two positive water samples (out of five) to classify a species as present typically had negligible effects on detection probabilities compared to using one positive water sample. Our findings demonstrate that eDNA metabarcoding is generally more sensitive than electrofishing for conducting fish surveys in freshwater streams, and that this outcome is not sensitive to methodological decisions associated with metabarcoding.

Cascading detection model for prediction of apnea-hypopnea events based on nasal flow and arterial blood oxygen saturation.

PURPOSE: Sleep apnea and hypopnea syndrome (SAHS) seriously affects sleep quality. In recent years, much research has focused on the detection of SAHS using various physiological signals and algorithms. The purpose of this study is to find an efficient model for detection of apnea-hypopnea events based on nasal flow and SpO2 signals. METHODS: A 60-s detector and a 10-s detector were cascaded for precise detection of apnea-hypopnea (AH) events. Random forests were adopted for classification of data segments based on morphological features extracted from nasal flow and arterial blood oxygen saturation (SpO2). Then the segments' classification results were fed into an event detector to locate the start and end time of every AH event and predict the AH index (AHI). RESULTS: A retrospective study of 24 subjects' polysomnography recordings was conducted. According to segment analysis, the cascading detection model reached an accuracy of 88.3%. While Pearson's correlation coefficient between estimated AHI and reference AHI was 0.99, in the diagnosis of SAHS severity, the proposed method exhibited a performance with Cohen's kappa coefficient of 0.76. CONCLUSIONS: The cascading detection model is able to detect AH events and provide an estimate of AHI. The results indicate that it has the potential to be a useful tool for SAHS diagnosis.

Vehicle Detection in Overhead Satellite Images Using a One-Stage Object Detection Model.

In order to improve the traffic in large cities and to avoid congestion, advanced methods of detecting and predicting vehicle behaviour are needed. Such methods require complex information regarding the number of vehicles on the roads, their positions, directions, etc. One way to obtain this information is by analyzing overhead images collected by satellites or drones, and extracting information from them through intelligent machine learning models. Thus, in this paper we propose and present a one-stage object detection model for finding vehicles in satellite images using the RetinaNet architecture and the Cars Overhead With Context dataset. By analyzing the results obtained by the proposed model, we show that it has a very good vehicle detection accuracy and a very low detection time, which shows that it can be employed to successfully extract data from real-time satellite or drone data.

Pulse pileup analysis for a double-sided silicon strip detector using variable pulse shapes.

Due to pulse pileup, photon counting detectors (PCDs) suffer from count loss and energy distortion when operating in high count rate environments. In this paper, we studied the pulse pileup of a double-sided silicon strip detector (DSSSD) to evaluate its potential application in a mammography system. We analyzed the pulse pileup using pulses of varied shapes, where the shape of the pulse depends on the location of photon interaction within the detector. To obtain the shaped pulses, first, transient currents for photons interacting at different locations were simulated using a Technology Computer-Aided Design (TCAD) software. Next, the currents were shaped by a CR-RC2 shaping circuit, calculated using Simulink. After obtaining these pulses, both the different orders of pileup and the energy spectrum were calculated by taking into account the following two factors: 1) spatial distribution of photon interactions within the detector, and 2) time interval distribution between successive photons under a given photon flux. We found that for a DSSSD with thickness of 300 µm, pitch of 25 µm and strip length of 1 cm, under a bias voltage of 50 V, the variable pulse shape model predicts the fraction free of pileup can be > 90 % under a photon flux of 3.75 Mcps/mm2. The double-sided silicon-strip detector is a promising candidate for digital mammography applications.

Optical Parameters Optimization for All-Time Star Sensor.

As an important development direction of star sensor technology, the All-Time star sensor technology can expand the application of star sensors to flight platforms inside the atmosphere. Due to intense atmospheric background radiation during the daytime, the commonly used star sensors operating in the visible wavelength range are significantly limited in their ability to detect stars, and hence the All-Time star sensor technology which is based on the shortwave infrared (SWIR) imaging system has become an effective research direction. All-Time star sensor detection capability is significantly affected by observation conditions and, therefore, an optimized selection of optical parameters, which mainly includes the field of view (FOV) and the detection wavelength band, can effectively improve the detection performance of All-Time star sensors under harsh observation conditions. This paper uses the model simulation method to analyze and optimize the optical parameters under various observation conditions in a high-altitude environment. A main parameter among those discussed is the analysis of detection band optimization based on the SWIR band. Due to the huge cost constraints of high-altitude experiments, we conducted experiments near the ground to verify the effectiveness of the detection band selection and the correctness of the SWIR star sensor detection model, which thereby proved that the optimization of the optical parameters for high altitudes was effective and could be used as a reference.

The Synthesis Model of Flat-Electrode Hemispherical Resonator Gyro.

The Hemispherical Resonator Gyro (HRG) is a solid-state and widely used vibrating gyroscope, especially in the field of deep space exploration. The flat-electrode HRG is a new promising type of gyroscope with simpler structure that is easier to be fabricated. In this paper, to cover the shortage of a classical generalized Coriolis Vibration Gyroscope model whose parameters are hard to obtain, the model of flat-electrode HRG is established by the equivalent mechanical model, the motion equations of unideal hemispherical shell resonator are deduced, and the calculation results of parameters in the equations are verified to be reliable and believable by comparing with finite element simulation and the reported experimental data. In order to more truthfully reveal the input and output characteristics of HRG, the excitation and detection models with assemble errors and parameters are established based on the model of flat-electrode capacitor, and they convert both the input and output forms of the HRG model to voltage changes across the electrodes rather than changes in force and capacitance. An identification method of assemble errors and parameters is proposed to evaluate and improve the HRG manufacturing technology and adjust the performance of HRG. The average gap could be identified with the average capacitance of all excitation and detection capacitors; fitting the approximate static capacitor model could identify the inclination angle and direction angle. With the obtained model, a firm and tight connection between the real HRG system and theoretical model is established, which makes it possible to build a fully functional simulation model to study the control and detection methods of standing wave on hemispherical shell resonator.

Pesticide Residues Identification by Optical Spectrum in the Time-Sequence of Enzyme Inhibitors Performed on Microfluidic Paper-Based Analytical Devices (µPADs).

Pesticides vary in the level of poisonousness, while a conventional rapid test card only provides a general "absence or not" solution, which cannot identify the various genera of pesticides. In order to solve this problem, we proposed a seven-layer paper-based microfluidic chip, integrating the enzyme acetylcholinesterase (AChE) and chromogenic reaction. It enables on-chip pesticide identification via a reflected light intensity spectrum in time-sequence according to the different reaction efficiencies of pesticide molecules and assures the optimum temperature for enzyme activity. After pretreatment of figures of reflected light intensity during the 15 min period, the figures mainly focused on the reflected light variations aroused by the enzyme inhibition assay, and thus, the linear discriminant analysis showed satisfying discrimination of imidacloprid (Y = -1.6525X - 139.7500), phorate (Y = -3.9689X - 483.0526), and avermectin (Y = -2.3617X - 28.3082). The correlation coefficients for these linearity curves were 0.9635, 0.8093, and 0.9094, respectively, with a 95% limit of agreement. Then, the avermectin class chemicals and real-world samples (i.e., lettuce and rice) were tested, which all showed feasible graphic results to distinguish all the chemicals. Therefore, it is feasible to distinguish the three tested kinds of pesticides by the changes in the reflected light spectrum in each min (15 min) via the proposed chip with a high level of automation and integration.