Complexity of confined water vitrification and its glass transition temperature.

The ability of vitrification when crossing the glass transition temperature (Tg) of confined and bulk water is crucial for myriad phenomena in diverse fields, ranging from the cryopreservation of organs and food to the development of cryoenzymatic reactions, frost damage to buildings, and atmospheric water. However, determining water's Tg remains a major challenge. Here, we elucidate the glass transition of water by analyzing the calorimetric behavior of nano-confined water across various pore topologies (diameters: 0.3 to 2.5 nm). Our approach involves subjecting confined water to annealing protocols to identify the temperature and time evolution of nonequilibrium glass kinetics. Furthermore, we complement this calorimetric approach with the dynamics of confined water, as seen by broadband dielectric spectroscopy and linear calorimetric measurements, including the fast scanning technique. This study demonstrated that confined water undergoes a glass transition in the temperature range of 170 to 200 K, depending on the confinement size and the interaction with the confinement walls. Moreover, we also show that the thermal event observed at ~136 K must be interpreted as an annealing prepeak, also referred to as the "shadow glass transition." Calorimetric measurements also allow the detection of a specific heat step above 200 K, which is insensitive to annealing and, thereby, interpreted as a true thermodynamic transition. Finally, by connecting our results to bulk water behavior, we offer a comprehensive understanding of confined water vitrification with potential implications for numerous applications.

Epitaxial SrTiO3 films with dielectric constants exceeding 25,000.

SignificanceSemiconductor interfaces are among the most important in use in modern technology. The properties they exhibit can either enable or disable the characteristics of the materials they connect for functional performance. While much is known about important junctions involving conventional semiconductors such as Si and GaAs, there are several unsolved mysteries surrounding interfaces between oxide semiconductors. Here we resolve a long-standing issue concerning the measurement of anomalously low dielectric constants in SrTiO3 films with record high electron mobilities. We show that the junction between doped and undoped SrTiO3 required to make dielectric constant measurements masks the dielectric properties of the undoped film. Through modeling, we extract the latter and show that it is much higher than previously measured.

The dielectric function profile across the water interface through surface-specific vibrational spectroscopy and simulations.

The dielectric properties of interfacial water on subnanometer length scales govern chemical reactions, carrier transfer, and ion transport at interfaces. Yet, the nature of the interfacial dielectric function has remained under debate as it is challenging to access the interfacial dielectric with subnanometer resolution. Here we use the vibrational response of interfacial water molecules probed using surface-specific sum-frequency generation (SFG) spectra to obtain exquisite depth resolution. Different responses originate from water molecules at different depths and report back on the local interfacial dielectric environment via their spectral amplitudes. From experimental and simulated SFG spectra at the air/water interface, we find that the interfacial dielectric constant changes drastically across an ∼1 Šthin interfacial water region. The strong gradient of the interfacial dielectric constant leads, at charged planar interfaces, to the formation of an electric triple layer that goes beyond the standard double-layer model.

A Quasi-Bound States in the Continuum Dielectric Metasurface-Based Antenna-Reactor Photocatalyst.

Metasurfaces are a class of two-dimensional artificial resonators, creating new opportunities for strong light-matter interactions. One type of nonradiative optical metasurface that enables substantial light concentration is based on quasi-Bound States in the Continuum (quasi-BIC). Here we report the design and fabrication of a quasi-BIC dielectric metasurface that serves as an optical frequency antenna for photocatalysis. By depositing Ni nanoparticle reactors onto the metasurface, we create an antenna-reactor photocatalyst, where the virtually lossless metasurface funnels light to drive a chemical reaction. This quasi-BIC-Ni antenna-reactor drives H2 dissociation under resonant illumination, showing strong polarization, wavelength, and optical power dependencies. Both E-field-induced electronic and photothermal heating effects drive the reaction, supported by load-dependent reactivity studies and our theoretical model. This study unlocks new opportunities for photocatalysis that employ dielectric metasurfaces for light harvesting in an antenna-reactor format.

Fluorescence Enhancement in Topologically Optimized Gallium Phosphide All-Dielectric Nanoantennas.

Nanoantennas capable of large fluorescence enhancement with minimal absorption are crucial for future optical technologies from single-photon sources to biosensing. Efficient dielectric nanoantennas have been designed, however, evaluating their performance at the individual emitter level is challenging due to the complexity of combining high-resolution nanofabrication, spectroscopy and nanoscale positioning of the emitter. Here, we study the fluorescence enhancement in infinity-shaped gallium phosphide (GaP) nanoantennas based on a topologically optimized design. Using fluorescence correlation spectroscopy (FCS), we probe the nanoantennas enhancement factor and observe an average of 63-fold fluorescence brightness enhancement with a maximum of 93-fold for dye molecules in nanogaps between 20 and 50 nm. The experimentally determined fluorescence enhancement of the nanoantennas is confirmed by numerical simulations of the local density of optical states (LDOS). Furthermore, we show that beyond design optimization of dielectric nanoantennas, increased performances can be achieved via tailoring of nanoantenna fabrication.

Third Harmonic Generation Enhancement and Wavefront Control Using a Local High-Q Metasurface.

High quality factor optical nanostructures provide a great opportunity to enhance nonlinear optical processes such as third harmonic generation. However, the field enhancement in these high quality factor structures is typically accompanied by optical mode nonlocality. As a result, the enhancement of nonlinear processes comes at the cost of their local control as needed for nonlinear wavefront shaping, imaging, and holography. Here we show simultaneous strong enhancement and spatial control over third harmonic generation with a local high-Q metasurface relying on higher-order Mie resonant modes. Our results demonstrate third harmonic generation at an efficiency of up to 3.25 × 10-5, high quality wavefront shaping as illustrated by a third harmonic metalens, and a flatband, angle independent, third harmonic response up to ±11° incident angle. The demonstrated high level of local control and efficient frequency conversion offer promising prospects for realizing novel nonlinear optical devices.

Achieving an Ultralow-κ yet Strong and Transparent Film by Antisolvent-Confined Nanowelding of Electrospun Polyimide Nanofibers.

Developing ultralow-κ (dielectric constant) polyimides (PIs) that are mechanically robust while also being optically transparent is challenging. For the first time, we report a nanoporous PI film with an ultralow κ of 1.8 in combination with a tensile strength of up to 180 MPa, a Young's modulus of up to 6 GPa, and a transmittance of ∼88%. This is achieved by direct nanowelding of a porous electrospun PI nanofiber membrane using a simple mixture of ethanol-dominating DMAc. Benefiting from the effective evaporation of the antisolvent ethanol upon heating, the proposed nanowelding approach allows for the localized surface dissolution of the PI nanofibers, which enables the dissolved PI to "glue" the nanofibers and occupy vacant space in the membrane, resulting in the formation of a dense but nanoporous self-reinforced nanocomposite film. Our findings provide a renewed understanding of the potential of electrospun nanofibrous materials, and the underlying principle can hopefully be applied to other commodity polymers.

Is Dielectric Mismatch Actually Important in 2D Perovskites?

Understanding and controlling exciton properties are important for the design of 2D semiconductors, such as monolayer transition metal dichalcogenides (TMDCs) and 2D halide perovskites (HPs). This paper demonstrates that the widespread strategy used for the exciton engineering of 2D HPs, based on dielectric mismatch, is flawed since dielectric mismatch has very little correlation with exciton properties. For monolayer TMDCs, however, the dielectric mismatch is shown to be more important.

Promoting Photon-to-Chemical Conversion through a Dielectric Antenna-Hybrid Bilayered Reactor Configuration.

The application of scattered light via an antenna-reactor configuration is promising for converting thermocatalysts into photocatalysts. However, the efficiency of dielectric antennas in photon-to-chemical conversion remains suboptimal. Herein, we present an effective approach to promote light utilization efficiency by designing dielectric antenna-hybrid bilayered reactors. Experimental studies and finite-difference time-domain simulations demonstrate that the engineered SiO2-carbon/metal dielectric antenna-hybrid bilayered reactors exhibit a synergy of absorption superposition and electric field confinement between carbon and metals, leading to the improved absorption of scattered light, upgraded charge carriers density, and ultimately promoted photoactivity in hydrogenating chlorobenzene with an average benzene formation rate of 18 258 µmol g-1 h-1, outperforming the reported results. Notably, the carbon interlayer proves to be more effective than the commonly explored dielectric TiO2 interlayer in boosting the benzene formation rate by over 3 times. This research paves the way for promoting near-field scattered photon-to-chemical conversion through a dielectric antenna-hybrid reactor configuration.

Dielectric Screening inside Carbon Nanotubes.

Dielectric screening plays a vital role in determining physical properties at the nanoscale and affects our ability to detect and characterize nanomaterials using optical techniques. We study how dielectric screening changes electromagnetic fields and many-body effects in nanostructures encapsulated inside carbon nanotubes. First, we show that metallic outer walls reduce the scattering intensity of the inner tube by 2 orders of magnitude compared to that of air-suspended inner tubes, in line with our local field calculations. Second, we find that the dielectric shift of the optical transition energies in the inner walls is greater when the outer tube is metallic than when it is semiconducting. The magnitude of the shift suggests that the excitons in small-diameter inner metallic tubes are thermally dissociated at room temperature if the outer tube is also metallic, and in essence, we observe band-to-band transitions in thin metallic double-walled nanotubes.

Tailoring Auger Recombination Dynamics in CsPbI3 Perovskite Nanocrystals via Transition Metal Doping.

Auger recombination is a pivotal process for semiconductor nanocrystals (NCs), significantly affecting charge carrier generation and collection in optoelectronic devices. This process depends mainly on the NCs' electronic structures. In our study, we investigated Auger recombination dynamics in manganese (Mn2+)-doped CsPbI3 NCs using transient absorption (TA) spectroscopy combined with theoretical and experimental structural characterization. Our results show that Mn2+ doping accelerates Auger recombination, reducing the biexciton lifetime from 146 to 74 ps with increasing Mn doping concentration up to 10%. This accelerated Auger recombination in Mn-doped NCs is attributed to increased band edge wave function overlap of excitons and a larger density of final states of Auger recombination due to Mn orbital involvement. Moreover, Mn doping reduces the dielectric screening of the excitons, which also contributes to the accelerated Auger recombination. Our study demonstrates the potential of element doping to regulate Auger recombination rates by modifying the materials' electronic structure.

Broadband, High-Reflectivity Dielectric Mirrors at Wafer Scale: Combining Photonic Crystal and Metasurface Architectures for Advanced Lightsails.

Highly ambitious initiatives aspire to propel a miniature spacecraft to a neighboring star within a human generation, leveraging the radiation pressure of lasers for propulsion. One major challenge for this enormous feat is to build a meter-scale, ultralow mass lightsail with broadband reflectivity. In this work, we present the design and fabrication of a lightsail composed of two distinct dielectric layers with photonic crystal/metasurface structure covering a 4" wafer. We achieved broadband reflection of >70% spanning over the full Doppler-shifted laser wavelength range during spacecraft acceleration with a low total mass in the range of a few grams when scaled up to meter size. Furthermore, we find new paths to reliably fabricate these subwavelength structures over macroscopic areas and then systematically characterize their optical performance, confirming their suitability for future lightsail applications. Our innovative device and precise nanofabrication approaches represent a significant leap toward interstellar exploration.

Interlayer Charge Transfer Induced Electrical Behavior Transition in 1D AgI@sSWCNT van der Waals Heterostructures.

The emergence of one-dimensional van der Waals heterostructures (1D vdWHs) opens up potential fields with unique properties, but precise synthesis remains a challenge. The utilization of mixed conductive types of carbon nanotubes as templates has imposed restrictions on the investigation of the electrical behavior and interlayer interaction of 1D vdWHs. In this study, we efficiently encapsulated silver iodide in high-purity semiconducting single-walled carbon nanotubes (sSWCNTs), forming 1D AgI@sSWCNT vdWHs. We characterized the semiconductor-metal transition and increased the carrier concentration of individual AgI@sSWCNTs via sensitive dielectric force microscopy and confirmed the results through electrical device tests. The electrical behavior transition was attributed to an interlayer charge transfer, as demonstrated by Kelvin probe force microscopy. Furthermore, we showed that this method of synthesizing 1D heterostructures can be extended to other metal halides. This work opens the door for the further exploration of the electrical properties of 1D vdWHs.

Multiwavelength Achromatic Deflector in the Visible Using a Single-Layer Freeform Metasurface.

Deflectors are essential for modulating beam direction in optical systems but often face form factor issues or chromatic aberration with conventional optical elements, such as prisms, mirrors, and diffractive/holographic optical elements. Despite recent efforts to address such issues using metasurfaces, their practicality remains limited due to operation wavelengths in the near-infrared or the fabrication difficulties inherent in the multilayer scheme. Here, we propose a novel single-layer metasurface achieving multiwavelength chromatic aberration-free deflection across the visible spectrum by employing the robust freeform design strategy to simplify the fabrication process. By properly selecting diffraction orders for red, green, and blue wavelengths to achieve identical wavelength-diffraction-order products, the metasurface deflects light at a consistent angle of 41.3° with a high efficiency. The coupled Bloch mode analysis explains the physical properties, and experimental fabrication and characterization confirm its effectiveness. This approach holds potential for various applications such as AR/VR, digital cameras, and high-quality optical systems.

Control of Quantized Spontaneous Emission from Single GaAs Quantum Dots Embedded in Huygens' Metasurfaces.

Advancements in photonic quantum information systems (QIS) have driven the development of high-brightness, on-demand, and indistinguishable semiconductor epitaxial quantum dots (QDs) as single photon sources. Strain-free, monodisperse, and spatially sparse local-droplet-etched (LDE) QDs have recently been demonstrated as a superior alternative to traditional Stranski-Krastanov QDs. However, integration of LDE QDs into nanophotonic architectures with the ability to scale to many interacting QDs is yet to be demonstrated. We present a potential solution by embedding isolated LDE GaAs QDs within an Al0.4Ga0.6As Huygens' metasurface with spectrally overlapping fundamental electric and magnetic dipolar resonances. We demonstrate for the first time a position- and size-independent, 1 order of magnitude increase in the collection efficiency and emission lifetime control for single-photon emission from LDE QDs embedded within the Huygens' metasurfaces. Our results represent a significant step toward leveraging the advantages of LDE QDs within nanophotonic architectures to meet the scalability demands of photonic QIS.

Unveiling Invariant Optical Properties of Dielectric Meta-Atoms.

The phase-shift, transmittance, and polarization properties of meta-atoms are investigated, motivated by their use as building blocks of metasurfaces used in metalenses, holograms, and beam shaping. We studied dielectric nanorod meta-atoms of several geometries, which included cylinders, triangles, squares, hexagons, octagons, and truncated cones. By analyzing light propagation through these meta-atoms for three different wavelengths (632.8, 545, and 50 nm), we show that the phase-shift introduced is independent of their cross-section shape, contrary to the expected behavior. Additionally, we show that the polarization response is independent of the shape and that the transmittance is partially shape-independent. We identify a novel dependence of phase-shift on the effective cross-sectional area of meta-atoms. These meta-atom optical properties are independent of its shape if its geometry has a C3 or larger rotational symmetry. This optical invariance has significant implications for the topological optimization of flat optics.

Flexible Solid-Electrolyte-Gated-Dielectric Carbon Nanotube Thin Film Transistors and Integrated Circuits with the Recorded Radiation Tolerance and Reparability.

Radiation-tolerance and repairable flexible transistors and integrated circuits (ICs) with low power consumption have become hot topics due to their wide applications in outer space, nuclear power plants, and X-ray imaging. Here, we designed and developed novel flexible semiconducting single-walled carbon nanotube (sc-SWCNT) thin-film transistors (TFTs) and ICs. Sc-SWCNT solid-electrolyte-gate dielectric (SEGD) TFTs showcase symmetric ambipolar characteristics with flat-band voltages (VFB) of ∼0 V, high ION/IOFF ratios (>105), and the recorded irradiation resistance (up to 22 Mrad). Moreover, flexible sc-SWCNT ICs, including CMOS-like inverters and NAND and NOR logic gates, have excellent operating characteristics with low power consumption (≤8.4 pW) and excellent irradiation resistance. Significantly, sc-SWCNT SEGD TFTs and ICs after radiation with a total irradiation dose (TID) ≥ 11 Mrad can be repaired after thermal heating at 100 °C. These outstanding characteristics are attributed to the designed device structures and key core materials including SEGD and sc-SWCNT.

Ultrahigh-Q Metasurface Transparency Band Induced by Collective-Collective Coupling.

The metasurface analogue of electromagnetically induced transparency (EIT) provides a chip-scale platform for achieving light delay and storage, high Q factors, and greatly enhanced optical fields. However, the literature relies on the coupling between localized and localized or localized and collective resonances, limiting the Q factor and related performance. Here, we report a novel approach for realizing collective EIT-like bands with a measured Q factor reaching 2750 in silicon metasurfaces in the near-infrared regime, exceeding the state of the art by more than 5 times. It employs the coupling between two collective resonances, the Mie electric dipole surface lattice resonance (SLR) and the out-of-plane/in-plane electric quadrupole SLR (EQ-SLR). Remarkably, the collective EIT-like resonance can have diverging Q factor and group delay due to the bound state in the continuum characteristics of the in-plane EQ-SLR. With these findings, our study opens a new route for tailoring light flow in metasurfaces.

Unidirectional Lasing from Mirror-Coupled Dielectric Lattices.

This paper reports how a hybrid system composed of transparent dielectric lattices over a metal mirror can produce high-quality lattice resonances for unidirectional lasing. The enhanced electromagnetic fields are concentrated in the cladding of the periodic dielectric structures and away from the metal. Based on a mirror-image model, we reveal that such high-quality lattice resonances are governed by bound states in the continuum resulting from destructive interference. Using hexagonal arrays of titanium dioxide nanoparticles on a silica-coated silver mirror, we observed lattice resonances with quality factors of up to 2750 in the visible regime. With the lattice resonances as optical feedback and dye solution as the gain medium, we demonstrated unidirectional lasing under optical pumping, where the array size was down to 100 µm × 100 µm. Our scheme can be extended to other spectral regimes to simultaneously achieve strongly enhanced surface fields and high quality factors.

Texture Transfer in Dielectric Layers via Nanocrystalline Networks: Insights from in Situ 4D-STEM.

Transition metal oxide dielectric layers have emerged as promising candidates for various relevant applications, such as supercapacitors or memory applications. However, the performance and reliability of these devices can critically depend on their microstructure, which can be strongly influenced by thermal processing and substrate-induced strain. To gain a more in-depth understanding of the microstructural changes, we conducted in situ transmission electron microscopy (TEM) studies of amorphous HfO2 dielectric layers grown on highly textured (111) substrates. Our results indicate that the minimum required phase transition temperature is 180 °C and that the developed crystallinity is affected by texture transfer. Using in situ TEM and 4D-STEM can provide valuable insights into the fundamental mechanisms underlying the microstructural evolution of dielectric layers and could pave the way for the development of more reliable and efficient devices for future applications.