Determination of the Re-188 Calibration Number for the Capintec CRC- 25PET Dose Calibrator.

BACKGROUND: During the development of novel Re-188 radiopharmaceuticals, it was discovered that no calibration settings were published to calibrate Re-188 on the Capintec CRC-25PET dose calibrator. METHODS: Sodium [188Re]perrhenate was eluted from an OncoBeta 188W/188Re generator to measure activity on a Capintec CRC-25R dose calibrator using established dose calibrator settings provided by the manufacturer. The eluent was then used to tune the calibra on settings on a Capintec CRC-25PET dose calibrator, accounting for geometry. Radionuclidic purity of the [188Re]perrhenate source was verified via gamma spectroscopy. RESULTS: The calibrator number for Re-188 was determined to be 469 x 10 for the Capintec CRC-25PET dose calibrator, which differed from the manufacturer provided calibra on number of 496 x 10 for the Capintec CRC-25R dose calibra on model. W-188 breakthrough was characterised as < 0.01%. CONCLUSION: This previously unreported calibration number can be used to determine the activity of Re- 188 labelled radiopharmaceuticals using the Capintec CRC-25PET dose calibrator model.

The concept of minimum detectable activity of radionuclide activity meters and their suitability for routine quality control of radiopharmaceuticals. An experimental study.

Radionuclide activity meters ("dose calibrators") are ionization chambers designed to measure relatively high amount of activities which are normally contained in radiopharmaceuticals. However, in the current radiopharmacy practice, these radiation detectors have been proposed to be used in measurements of samples with lower activity, such as in routine quality control (QC) tests. To check the feasibility of such measurements, in this work we assessed the performance of four different devices in the lower range of detectability, by means of experimental measurements of a radioactive sample. Accuracy and precision of each device was evaluated as a function of the activity contained in the sample in order to estimate a threshold value, or minimum detectable activity (MDA), which, according to our operational definition, may be used to express the concept of Limit of Quantification (LoQ). Moreover, a generalized procedure for the estimation of the MDA was established, which, being device- and radionuclide-independent, it may be adopted by every laboratory. Our results showed a significant variability in the MDA achieved by different activity meters. Hence a single QC test may result feasible with one specific instrument, and not with another one. Moreover, feasibility depends also on the confidence level required for each test. For these reasons, each activity meter should be qualified for its MDA or LoQ by each laboratory according to a procedure such as that described in this paper.

Levantamento do controle de qualidade de calibradores de dose de radiofármacos em serviços de medicina nuclear na cidade de São Paulo / Survey on quality control of radiopharmaceutical dose calibrators in nuclear medicine units in the city of São Paulo, SP, Brazil", "_i": "en

OBJETIVO: Realizar levantamento sobre quais testes de controle de qualidade são realizados nos calibradores de dose dos serviços de medicina nuclear da cidade de São Paulo, SP. Estudar a exatidão das medições de atividade de sete calibradores de dose no Laboratório de Calibração de Instrumentos do Instituto de Pesquisas Energéticas e Nucleares, usando fontes de radionuclídeos importantes clinicamente. MATERIAIS E MÉTODOS: O levantamento sobre o controle de qualidade foi realizado a partir de questionários enviados aos serviços. Foram utilizados, no estudo de exatidão dos sete calibradores de dose, fontes de Ga-67, Tc-99m e Tl-201 e um instrumento padrão secundário. RESULTADOS: Os resultados do levantamento sobre os testes de controle de qualidade mostraram algumas impropriedades, por exemplo, a falta da realização diária do teste de reprodutibilidade por todos os serviços. Os resultados do teste de exatidão para os sete calibradores de dose estudados mostraram-se dentro do limite de aceitação da norma nacional (±10 por cento). CONCLUSÃO: A situação com relação ao controle de qualidade de calibradores de dose é insatisfatória, de acordo com o pequeno número de serviços que participaram do levantamento. O estudo da exatidão em sete calibradores de dose não indicou falhas de desempenho e estabeleceu uma calibração desses instrumentos para as fontes utilizadas.

OBJECTIVE: To perform a survey on routine quality control tests of dose calibrators at nuclear medicine units in the city of São Paulo, SP, Brazil. To evaluate the accuracy of measurements of seven dose calibrators activities, utilizing sources of clinically significant radionuclides at the calibration laboratory of Instituto de Pesquisas Energéticas e Nucleares. MATERIALS AND METHODS: The survey on quality control of dose calibrators has been based on questionnaires answered by the nuclear medicine units. Seven dose calibrators, Ga-67, Tc-99m and Tl-201 sources and a secondary standard instrument have been utilized in the accuracy study. RESULTS: The survey results on the quality control tests of the dose calibrators showed some inappropriateness, for example, the absence of daily reproducibility tests in all of the units. The accuracy tests for the seven dose calibrators showed results within the acceptable limit in compliance with the national regulations (±10 percent). CONCLUSION: According to the few nuclear medicine units participating in the survey, the dose calibrators quality control is unsatisfactory. The accuracy study of seven dose calibrators has not demonstrated any performance faults, and has established the calibration of these instruments for the utilized sources.