Morphological analysis of patellofemoral joint in haemophilic arthropathy: A case-control study.

INTRODUCTION: Knees affected by haemophilic arthropathy exhibit distinct differences in both bone morphology and soft tissue behaviour. This study aims to analyse the morphological characteristics of the distal femur and patellofemoral joint in patients with haemophilia in comparison to normal healthy population. MATERIAL AND METHODS: Study was conducted as pair-matched case-control study with 43 individuals in both the haemophilia group and the control group. Patellar luxation, patellar tilt (PT), length of the patella in both axis (pAP, pML), depth and angle of trochlear sulcus (SD, SA), lateral trochlear inclination (LTI), medial and lateral femoral facet length (mFL, LFL), intercondylar depth (ID), transepicondylar axis (TEA) and lateral condyle length (LCL) were assessed on knee MRI. Correlation between Pettersson score and measured variables were also analysed. RESULTS: PT was medial sided in 10 (23.2%) cases in haemophilic group. Mean values of pAP, pML, PT were significantly lower in haemophilia group (p < .001, p: .007, p = .001 respectively). There were no significant changes in SA (p = .628), SD (p = .340), LTI (p = .685), LFL (p = .241) and MFC-LFC (p = .770) whilst mFL was significantly longer in haemophilia group (p = .009). ID (p < .001), TEA (p = .007) and LCL (p = .001) were all shorter in haemophilia group. Pettersson score was inversely correlated with pAP, pML, ID, TEA, LCL, pML/SA and ID/LCL. CONCLUSION: Morphological changes in haemophilic arthropathy involve a smaller and medially-tilted patella, narrowed lateral condyle and transepicondylar axis, combined with reduced intercondylar depth. These alterations must keep in mind especially in pre- and intraoperative assessments for arthroplasty procedures.

Free medial femoral condyle osteocutaneous flap for repairing stage IIIB osteonecrosis of the lunate: a case report.

BACKGROUND: There are several surgical options for osteonecrosis of the lunate, and confirming the effectiveness of various surgical methods remains challenging. Here, we present a case of stage IIIB osteonecrosis of the lunate repaired with a free medial femoral condyle osteocutaneous flap. CASE PRESENTATION: A 43-year-old male construction worker was admitted to our hospital due to right wrist pain, impaired mobility, and pain aggravated by activity for 10 months. The patient was diagnosed with stage IIIB osteonecrosis of the lunate based on the orthopantomogram and magnetic resonance imaging of the right wrist. Considering the patient's medical history, physical examination, auxiliary examination, and wishes, reconstruction was performed using a free medial femoral condyle osteocutaneous flap. After the flap survived completely, the K-wires were removed one month after the operation, the external brace was removed two months after the operation, and functional wrist rehabilitation was initiated. After six months of follow-up, the wrist swelling and pain resolved, and the reconstructed lunate bone was viable. Additionally, the last follow-up was conducted in the sixth month after surgery; the affected hand grip strength improved from about 70% (28 kg) to 80% (32 kg) compared with the healthy side (40 kg); the visual analog scale score decreased from 6.5 points before the operation to 1 point; and the MAYO score increased from 60 points before the operation to 85 points. CONCLUSIONS: The success of this case reinforces the potential of the free medial femoral condyle osteocutaneous flap as a new treatment option for stage IIIB osteonecrosis of the lunate and further expands the existing treatment options. Using a free medial femoral condyle osteocutaneous flap to reconstruct the lunate and restore the carpal anatomy may.

A larger radius of the medial femoral posterior condyle is a risk factor for medial meniscus posterior root tears.

BACKGROUND: Studies have shown an association between medial meniscus posterior root tears (MMPRT) and morphologic characteristics of the bone. However, the association between distal femoral bone morphology and MMPRT, particularly the medial femoral posterior condyle, is poorly understood. Our study aimed to determine the association between the morphologic characteristics of the medial posterior femoral condyle and MMPRT. METHODS: A retrospective case-control study was performed from January 2021 to January 2022. After screening based on the inclusion and exclusion criteria, two matched groups were analyzed: the MMPRT group and the isolated lateral meniscus tears group. The hip-knee-ankle angle (HKA) and Kellgren-Lawrence grade (KLG) were measured on radiographs; the medial tibial slope angle (MTSA), medial tibial plateau depth (MTPD), and radius of the medial femoral posterior condyle (RMFPC) were measured on magnetic resonance imaging (MRI) in both groups. The area under the curve (AUC) and the best cutoff value for predicting MMPRT were calculated by using receiver operating characteristic (ROC) curve analysis. RESULTS: The final analysis included a total of 174 patients (87 MMPRT patients and 87 controls). Significant differences were shown in the RMFPC (17.6 ± 1.0 vs. 16.2 ± 1.0, p < 0.01) and MTSA (6.4 ± 2.0 vs. 4.0 ± 1.3, p < 0.01), which were larger than those of the control group. The MTPD (1.8 ± 0.6 vs. 2.9 ± 0.7, p < 0.01) and HKA (175.4 ± 2.2 vs. 179.0 ± 2.7, p < 0.01) of the injury group were significantly different from the control group, and both were lower than the control group. However, between the MMPRT and control groups on the KLG (2.3 ± 0.6 vs. 2.2 ± 0.6, p = 0.209), there was no statistically significant difference. Among them, the RMFPC cutoff value was calculated to be 16.8 mm by ROC curve analysis, and the sensitivity and specificity were both 81.61%. CONCLUSIONS: This study demonstrated that larger RMFPC, MTSA, smaller MTPD, and HKA were all associated with MMPRT, and RMFPC ≥ 16.8 mm was considered as a significant risk factor for MMPRT.

Evaluating the reliability of the lateral femoral condyle measuring methods by different modalities for patients with lateral patellar dislocation.

BACKGROUND: A variety of measurement methods and imaging modalities are in use to quantify the morphology of lateral femoral condyle (LFC), but the most reliable method remains elusive in patients with lateral patellar dislocation (LPD). The purpose of this study was to determine the intra- and inter-observer reliability of different measurement methods for evaluating the morphology of LFC on different imaging modalities in patients with LPD. METHODS: Seventy-three patients with LPD were included. Four parameters for quantifying the morphology of LFC were retrospectively measured by three observers on MRI, sagittal CT image, conventional radiograph (CR), and three-dimensional CT (3D-CT). The intra-class correlation coefficient was calculated to determine the intra- and inter-observer reliability. Bland-Altman analysis was conducted to identify the bias between observers. RESULTS: The lateral femoral condyle index (LFCI) showed better intra- and inter-observer reliability on MRI and 3D-CT than on CR and sagittal CT images. The mean difference in the LFCI between observers was lowest on 3D-CT (0.047), higher on MRI (0.053), and highest on sagittal CT images (0.062). The LFCI was associated with the lateral femoral condyle ratio (ρ = 0.422, P = 0.022), lateral condyle index (r = 0.413, P = 0.037), and lateral femoral condyle distance (r = 0.459, P = 0.014). The LFCI could be reliably measured by MRI and 3D-CT. CONCLUSION: The LFCI could be reliably measured by MRI and 3D-CT. The LFCI was associated with both the height and length of LFC and could serve as a comprehensive parameter for quantifying the morphology of LFC in patients with LPD.

Medial femoral condyle OCD (osteochondritis dissecans): correlation between imaging and arthroscopy.

Osteochondritis dissecans (OCD) describes a pathologic condition centered at the osteochondral junction that may result in an unstable subchondral fragment (progeny), disruption of the overlying cartilage, which may separate from the underlying parent bone. It is one of the causes of chronic knee pain in children and young adults. The current literature on OCD lesions focuses primarily on the medial femoral condyle (MFC), but inconsistent use of terminology, particularly in the distinction of OCD lesions between skeletally immature and mature patients has created uncertainty regarding imaging workup, treatment, and long-term prognosis. This article reviews the pathophysiology of MFC OCD lesions, highlighting the role of endochondral ossification at the secondary growth plate of the immature femoral condyles, the rationale behind the imaging work-up, and key imaging findings that can distinguish between stable lesions, unstable lesions, and physiologic variants. This overview also provides a case-based review to introduce imaging correlates with the ROCK (Research in Osteochondritis of the Knee) arthroscopic classification.

Ultrasound-guided determination demonstrates influence of age, sex and type of sport on medial femoral condyle cartilage thickness in children and adolescents.

PURPOSE: To analyse the reliability of ultrasound-guided measurement of the cartilage thickness at the medial femoral condyle in athletically active children and adolescents before and after mechanical load in relation to age, sex and type of sport. METHODS: Three successive measurements were performed in 157 participants (median/min-max age: 13.1/6.0-18.0 years, 106 males) before and after mechanical load by squats at the same site of the medial femoral condyle by defined transducer positioning. Test-retest reliability was examined using Cronbach's α $\alpha $ calculation. Differences in cartilage thickness were analysed with respect to age, sex and type of practiced sports, respectively. RESULTS: Excellent reliability was achieved both before and after mechanical load by 30 squats with a median cartilage thickness of 1.9 mm (range: 0.5-4.8 mm) before and 1.9 mm (0.4-4.6 mm) after mechanical load. Male cartilages were thicker (p < 0.01) before (median: 2.0 mm) and after (2.0 mm) load when compared to female cartilage (before: 1.6 mm; after: 1.7 mm). Median cartilage thickness was about three times higher in karate athletes (before: 2.3 mm; after: 2.4 mm) than in sports shooters (0.7; 0.7 mm). Cartilage thickness in track and field athletes, handball players and soccer players were found to lay in-between. Sport type related thickness changes after mechanical load were not significant. CONCLUSION: Medial femoral condyle cartilage thickness in childhood correlates with age, sex and practiced type of sports. Ultrasound is a reliable and simple, pain-free approach to evaluate the cartilage thickness in children and adolescents. LEVEL OF EVIDENCE: Level III.

Tibiofemoral bone configuration is not associated with hamstring muscle strength in male and female patients with ACL reconstruction.

PURPOSE: Previous evidence indicated that the tibiofemoral bone configuration might elevate the risk of an anterior cruciate ligament (ACL) injury. Furthermore, a low hamstring-to-quadriceps muscle ratio predisposes especially females to unfavourable knee kinematics. The primary objective of the present study was to investigate sex-specific associations between tibiofemoral bone geometry and isokinetic knee flexion torque in patients with primary ACL injury followed by ACL reconstruction. METHODS: N = 100 patients (72 = male, 28 = female, age = 31.3 ± 10.2, body mass index = 25.3 ± 3.6) with primary ACL rupture with isokinetic knee flexion torque assessments before and 6 months after ACL reconstruction surgery were analysed. Magnetic resonance imaging scans were analysed for medial posterior tibial slope (MPTS) and lateral posterior tibial slope, notch width index (NWI) and lateral femoral condyle index (LFCI). Additionally, isokinetic knee flexion torque (60°/s) and hamstring-quadriceps ratios were evaluated. Subsequently, functional parameters were correlated with imaging data for gender subgroups. RESULTS: The findings showed that presurgical isokinetic knee flexion torque was not associated with any marker of femoral or tibial bone geometry. Further, while significant differences were observed between female (0.883 ± 0.31 Nm/kg) and male (1.18 ± 0.35 Nm/kg) patients regarding preoperative normalized knee flexion torque (p < 0.001), no significant sex differences were found for percentage increases in normalized knee flexion torque from presurgery to postsurgery. Generally, female patients demonstrated significantly higher MPTS magnitudes (p < 0.05) and lower LFCI values (p < 0.05) compared to men. CONCLUSION: The present results demonstrated no association between tibial or femoral bone geometry and muscle strength of the hamstrings in patients with ACL reconstruction, indicating an important mismatch of muscular compensation to deviations in bone geometry. There were no sex-specific differences in tibiofemoral bone parameters. LEVEL OF EVIDENCE: Level III.

The posterior condyle grows in the direction of the increasing posterior condylar offset and the inclination angle of the ACL changes accordingly.

PURPOSE: The purpose of this study was to reveal the changes in the shape of the posterior femoral condyle and the morphology of the ACL, both before and after epiphyseal closure. The hypothesis of this study is that the morphological change of the posterior femoral condyle and that of the ACL may be correlated to some extent. METHODS: Eighty-one patients who underwent surgery for the knee joint (meniscal repair, arthroscopic synovectomy, medial patellofemoral ligament reconstruction) between 2016 and 2021 were included in this study, 48 patients aged 13 years or under (before epiphysis closure; mean age: 10.9 (range: 7-13) and 33 patients aged over 18 years or over (after epiphysis closure; mean age: 21.7 (range: 18-30). The shape of the posterior femoral condyle was evaluated via lateral view radiographs, and the morphology of the ACL was measured via sagittal and coronal magnetic resonance imaging (MRI) images. RESULTS: The morphology of the posterior condyle in the lateral view radiograph in patients aged 13 and under was larger in the direction of the short axis of the femur compared with that in those aged 18 and over (p < 0.001). The mean value of the inclination angle of the anterior cruciate ligament (ACL) in the sagittal plane was significantly smaller in patients aged 13 and under (41.7° ± 3.7) than in those aged 18 and over (48.5° ± 4.2) (p < 0.001). The mean values of the inclination angle of the ACL in the coronal plane were significantly smaller in patients aged 13 and under (55.7° ± 6.4) than in those aged 18 and over (63.4° ± 4.4) (p < 0.001). CONCLUSION: This study evaluates and compares the shape of the posterior femoral condyle and the morphology of the ACL fiber before and after epiphyseal closure. The posterior femoral condyle grew posteriorly rather than longitudinally, and the inclination of the ACL fibers was thought to change accordingly. LEVEL OF EVIDENCE: Level Ⅲ.

Versatility of the medial corticoperiosteal flap: from recalcitrant non-unions up to large bony defects.

BACKGROUND: Reconstructive microsurgery techniques using vascularized bone grafts have revolutionized the treatment of complex cases associated with recalcitrant non-unions or osteomyelitis. The medial femoral corticoperiosteal flap (MFCP flap) has emerged as a valuable option in bone reconstruction. Its clinical applications have been extended over the years considering this flap from non-unions with minimal bone lost, up to large intercalary defects of the upper and lower extremities. This article aims to present the clinical applications and outcomes of the MFCP flap in various reconstructive scenarios. METHODS: Seventy-nine patients with persistent non-union and bone defects of the upper and lower limb were evaluated from June 2008 to October 2020. All of them were reconstructed with a corticoperiosteal flap from the medial femoral condyle in our hospital. Previous procedures, bone gap and type of flap used were recorded. Postoperative functional status was assessed with time of bone healing, complications and clinical final outcome. RESULTS: Radiological evidence of bone union was observed at 4.09 months (range 2-9). Healing rate was 97% with periosteal corticocancellous flaps (PCC flaps) and 93% with corticoperiosteal flaps (CP flaps). Average follow-up was 14.5 months (range 5-28). There were no significant donor site complications. CONCLUSIONS: The MFCP flap offers a versatile and reliable option for bone reconstruction. Its ability to provide vascularized bone tissue with low morbidity enhances the healing process and improves outcomes. The MFCP flap has been increasing its applications and it serves as a valuable option in the treatment of recalcitrant non-unions or bony defects irrespective of site and size up to 5 cm in the upper and lower extremities.

Novel approach of plate assisted buttressing in Hoffa fracture.

PURPOSE: Hoffa fracture is a femoral condyle fracture in the coronal plane. The lateral condyle is more commonly involved. The diagnosis is often difficult to detect with routine radiographs. Conservative management in this type of fracture resulted in nonunion, malunion, and other complications, such as stiff knee. Therefore, surgical management is mandatory in displaced fractures. Previous studies suggest only application of cancellous screw fixation, but these are not enough to counter vertical shear stress. Therefore, this study will evaluate the clinical outcomes of open reduction and internal fixation of Letenneur type I Hoffa fracture using cancellous screws with posterior buttressing plate. METHOD: This was a prospective cohort study conducted from March 2017 to July 2022 in orthopaedics department of tertiary care center after approval of institutional ethical committee. The study included 36 patients with Letenneur type I fractures treated by open reduction and internal fixation using posterior buttress plate and cancellous screws. Radiographs and clinical outcomes, range of movement (ROM), bone union, and knee society score (KSS) of patients were assessed at the end of 4 and 12 months in the follow-ups. All statistical analysis was done using Epi info version 7.2.1.0. RESULTS: In the 36 patients with Letenneur type I fracture, the majority belong to younger age group between 25 and 54 years with 22 males and 14 females. The modes of injury were road traffic accidents in 25 patients and fall from height in 11 patients. The right knee was involved in 21 cases and left was involved in 15 cases. Lateral condyle involvement was seen in 27 cases and medial condyle in 9 cases. All 36 patients with Letenneur type I Hoffa fracture were evaluated 4 months after surgical intervention. The notable improvements were observed in terms of ROM 120.4° ± 5.0° and KSS 85.0 ± 4.2. At the 12-month follow-up, considerably better outcomes were maintained regarding ROM 128.1° ± 5.2° and KSS 89.3 ± 4.8 with p < 0.05 which was statistically significant. At the final follow-up, all patients had routine fracture healing with a union time of (3.2 ± 3.4) months. CONCLUSIONS: Fixation of Letenneur type I Hoffa fracture with cancellous screws and posterior buttress plate is effective, reliable and capable of providing adequate stability. Buttress plate assisted fixation is a valuable enhancement of the conventional technique of lag screw fixation of Hoffa fractures.

A novel anatomical locked medial femoral condyle plate: a biomechanical study.

BACKGROUND: Fixation with a distal lateral femoral plate is a standard approach in treating osteoporotic or comminuted supracondylar femur fractures. However, in clinical practice, this method may prove inadequate, necessitating the application of a plate on the medial side of the distal femur. The aim of this study is to perform a biomechanical evaluation of the newly manufactured anatomically locked plate applied to the distal medial femoral condyle. MATERIALS AND METHODS: The plate underwent 2 biomechanical tests by simulating an AO/OTA 33A3 type supracondylar fracture model on synthetic femur bones. The samples were divided into three groups. Fracture fixations were carried out on the medial side using the distal femur medial anatomical locking plate (DFMALP) in group A samples, on the lateral side using the distal femur lateral anatomical locking plate in group B samples, and on both sides in group C samples. RESULTS: In the axial compression test, stability was preserved 23% more in group C than in group B. During the cyclic axial compression test, total displacement was 21% less in group C than in group B. Group A was collapsed at early cycle degrees. CONCLUSION: In our study, it was observed that the application of DFMALP in conjunction with the lateral plate in AO/OTA 33A3 fragmented supracondylar femur fractures significantly enhanced biomechanical fracture stability. LEVEL OF EVIDENCE: This is a Level 2 prospective, randomized controlled study.

Comparison of bone ingrowth between two porous titanium alloy rods with biogenic lamellar structures and diamond crystal lattice on femoral condyles in rabbits.

PURPOSE: The comparison of bone ingrowth between two types of porous titanium alloy rods with different micro-architectures including diamond crystal lattice (Re-rod) and biogenic lamellar configurations (Bi-rod) on femoral condyles was investigated in this study. METHODS: Twelve rabbits were used. Re-rod (Re-rod group) and Bi-rod (Bi-rod group) were implanted randomly in femoral condyles of each rabbits respectively. Bone ingrowth of these two rods were investigated and compared. 4 and 12 weeks after the operation, X-ray, micro-CT and histological examinations were performed. RESULTS: No femoral condyle fracture and rod defluxion in the two groups was noted in the X-ray images during the observation period. Micro-CT images showed that all metal trabeculae in the Bi-rod group were covered by new bone at 4 and 12 weeks, whereas partial metal trabeculae in the Re-rod group were still uncovered at 12 weeks. Histological images showed that there was new bone growth in the centre and periphery of Bi-rods at 4 and 12 weeks, and there were several areas without new bone ingrowth at 4 and 12 weeks in the centre of Re-rods. In micro-CT analysis, the bone volume to total volume (BV/TV) of the volume of interest (VOI) of the Bi-rod group was higher than in the Re-rod group [(0.0794 ± 0.0021) % Vs (0.0521 ± 0.0032) % and (0.0875 ± 0.0039) % Vs (0.0702 ± 0.0028) % respectively, P < 0.05] at 4 weeks and 12 weeks. Whereas, the mean trabecular thickness (Tb.Th) values of VOI between the two groups were not significantly statistically different at 4 and 12 weeks. In histological analysis, the BV/TV of the VOI of the Bi-rod group was higher than in the Re-rod group [(0.0624 ± 0.0021) % Vs (0.0435 ± 0.0028) % and (0.0675 ± 0.0024) % Vs (0.0476 ± 0.0031) % respectively, P < 0.05] at 4 weeks and 12 weeks. CONCLUSION: These results showed that Bi-rods got better bone ingrowth in femoral condyles of rabbits compared with Re-rods.

The larger patellar tilt angle and lower intercondylar notch angle might increase posterior cruciate ligament injury risk: a retrospective comparative study.

BACKGROUND: Posterior cruciate ligament (PCL) injuries are common ligament injuries of the knee, and previous studies often focused on the associations between the morphology of the knee and PCL injuries. Studies on the correlation between PCL injuries and patellofemoral alignment are limited. METHODS: This retrospective study included 92 patients with PCL injured and 92 patients with PCL intact. Measurement parameters were compared between the two groups, including patellar tilt angle, congruence angle, patellar height, hip-knee-ankle angle, lateral trochlear inclination, femoral condyle ratio, bicondylar width, intercondylar notch width and index, notch angle, trochlear facet asymmetry, and trochlear sulcus depth and angle. Independent risk factors associated with PCL injuries were identified by logistic regression analyses. RESULTS: In the PCL injured group, the patellar tilt angle was significantly larger (13.19 ± 5.90° vs. 10.02 ± 4.95°, P = 0.04); the intercondylar notch angle was significantly lower (60.97 ± 7.83° vs. 67.01 ± 6.00°, P = 0.004); the medial and lateral femoral condyle ratio were significantly larger (0.63 ± 0.64 vs. 0.60 ± 0.56, P = 0.031; 0.65 ± 0.60 vs. 0.58 ± 0.53, P = 0.005) than in the PCL intact group. There were 11 patients with patellar dislocation in the PCL injured group, accounting for 12%. In these patients, the patellar height was higher (1.39 ± 0.17 vs. 1.09 ± 0.25, P = 0.009); the trochlear sulcus angle was larger (157.70 ± 8.7° vs. 141.80 ± 8.78°, P < 0.001); and the trochlear sulcus depth was shallower (3.10 ± 1.20mm vs. 5.11 ± 1.48mm, P = 0.003) than those in the patients without patellar dislocation. Multivariate analyses showed that patellar tilt angle (each increase 1 degree, OR = 1.14) and intercondylar notch angle (each increase 1 degree, OR = 0.90) were independent risk factors for PCL injuries. CONCLUSION: The patients with PCL injuries had larger patellar tilt angles, lower intercondylar notch angles, and longer posterior femoral condyles than patients with PCL intact. The larger patellar tilt angle and lower intercondylar notch angle might be risk factors for PCL injuries.

Distal femoral torsion is correlated with higher-grade trochlear dysplasia and shorter anterior condyles in patients with patellar dislocation and increased femoral torsion.

PURPOSE: To describe the characteristics of femoral torsion in patients with different segmental torsion types and to evaluate the correlations between segmental torsion and the morphology of the femoral condyles and trochlea in patients with patellar dislocation and increased femoral torsion. METHODS: Between January 2021 and March 2023, 69 patients were included and classified into two groups according to the femoral segment contributing the most to total torsion: 32 patients in Group A (femoral neck and shaft torsion) and 37 patients in Group B (distal torsion). Trochlear dysplasia was evaluated using Dejour's classification and sulcus angle. The morphology of the femoral condyles was evaluated using the lengths and ratios of the medial and lateral condyles. Correlations between femoral torsion and morphology were evaluated. RESULTS: Total torsion was significantly correlated with femoral neck and shaft torsion (r = 0.882, P < 0.001) and distal torsion (r = 0.262, P = 0.030). Femoral neck and shaft torsion was significantly increased with increasing total torsion. The trochlear sulcus was flatter and more dysplastic, and the anterior condyles were shorter in Group B. Distal torsion was significantly correlated with the lengths of the medial and lateral anterior condyles (r = - 0.567, P < 0.001; r = -0.701, P < 0.001), sulcus angle (r = 0.611, P < 0.001) and Dejour trochlea type (r = 0.512, P = 0.001), while femoral neck and shaft torsion showed no correlations. CONCLUSION: Femoral torsion is a complex of femoral neck and shaft torsion and distal torsion, especially femoral neck and shaft torsion. Distal torsion was significantly correlated with a flatter trochlear sulcus, higher-grade trochlear dysplasia, and shorter anterior condyles. The new findings highlighted the importance of the segmental evaluation of femoral torsion, which would facilitate understanding of the anatomical characteristics of femoral torsion in patients with patellar dislocation and increased femoral torsion and may lead to improvement in the surgical options regarding femoral torsion. LEVEL OF EVIDENCE: Level III.

What it takes to have a high-grade pivot shift-focus on bony morphology.

PURPOSE: Variations in femoral and tibial bony morphology have been associated with higher clinical grading and increased quantitative tibial translation, but not tibial acceleration, during the pivot shift test following anterior cruciate ligament (ACL) injury. The purpose of this study was to determine the impact of femoral and tibial bony morphology, including a measurement influenced by both parameters (the Lateral Tibiofemoral Articular Distance (LTAD)), on the degree of quantitative tibial acceleration during the pivot shift test and rates of future ACL injury. METHODS: All patients who underwent primary ACL reconstruction from 2014 to 2019 by a senior orthopedic surgeon with available quantitative tibial acceleration data were retrospectively reviewed. All patients underwent a pivot shift examination under anesthesia with a triaxial accelerometer. Measurements of femoral and tibial bony morphology were performed by two fellowship-trained orthopedic surgeons using preoperative magnetic resonance imaging and lateral radiographs. RESULTS: Fifty-one patients were included at a mean follow-up of 4.4 years. The mean quantitative tibial acceleration during the pivot shift was 13.8 m/s2 (range: 4.9-52.0 m/s2). A larger Posterior Condylar Offset Ratio (r = 0.30, p = 0.045), smaller medial-to-lateral width of the medial tibial plateau (r = - 0.29, p = 0.041), lateral tibial plateau (r = - 0.28, p = 0.042), and lateral femoral condyle (r = - 0.29, p = 0.037), and a decreased LTAD (r = - 0.53, p < 0.001) significantly correlated with increased tibial acceleration during the pivot shift. Linear regression analysis demonstrated an increase in tibial acceleration of 1.24 m/s2 for every 1 mm decrease in LTAD. Nine patients (17.6%) sustained ipsilateral graft rupture and 10 patients (19.6%) sustained contralateral ACL rupture. No morphologic measurements were associated with rates of future ACL injury. CONCLUSION: Increased convexity and smaller bony morphology of the lateral femur and tibia were significantly associated with increased tibial acceleration during the pivot shift. Additionally, a measurement, termed the LTAD, was found to have the strongest association with increased tibial acceleration. Based on the results of this study, surgeons can utilize these measurements to preoperatively identify patients at risk of increased rotatory knee instability. LEVEL OF EVIDENCE: Level IV.

The posterolateral upslope of a low-conforming insert blocks the medial pivot during a deep knee bend in TKA: a comparative analysis of two implants with different insert conformities.

PURPOSE: Tibial insert conformity in total knee arthroplasty (TKA) is of interest due to the potential effect on tibiofemoral kinematics. This study determined differences in anterior-posterior movements of the femoral condyles, pivot locations, and internal tibial rotation in different arcs of flexion for two implants with different insert conformities in kinematically aligned TKA. METHODS: Twenty-five patients treated with a medial and lateral low-conforming, posterior cruciate ligament (PCL) retaining (LC CR) implant followed by a medial ball-in-socket and flat, lateral PCL sacrificing (B-in-S CS) implant in the contralateral knee underwent single-plane fluoroscopy during a deep knee bend. Analysis following 3D-to-2D image registration determined tibiofemoral kinematics and patients completed validated outcome scores for both knees. RESULTS: The mean follow-up of 1.6 ± 0.4 years for the knee with the B-in-S CS implant was shorter than the 2.7 ± 1.2 years for the LC CR implant. From 0º to 30º of flexion, a medial pivot occurred with the tibia rotating internally approximately 5º with both implants. From 30º to 90º, the pivot remained medial and internal rotation increased to 10º with the B-in-S CS implant. In contrast, neither femoral condyle moved more than 1 mm with the LC CR implant from 30º to 60º, but from 60º to 90º degrees, a lateral pivot occurred and internal rotation increased. Internal rotation of the tibia on the femur from 0° to maximum flexion occurred about a medial pivot similar to the native knee for the B-in-S CS implant and was 4.5° greater than that of the LC CR implant (10.4° vs 5.9°). There was no difference in the median patient-reported outcome scores between implant designs. CONCLUSIONS: Tibial insert conformity is a primary determinant of a medial or lateral pivot during a deep knee bend. One explanation for the transition from a medial to lateral pivot between 30º and 60º with the LC CR implant is the chock-block effect of the insert's posterolateral upslope which impedes posterior movement of the lateral femoral condyle. Because there is no posterolateral upslope in the insert of the B-in-S CS implant, the tibia pivots medially throughout flexion similar to the native knee. LEVEL OF EVIDENCE: Level III.

Bone mineral density around the knee after open wedge high tibial osteotomy measured up to 24 months in 51 patients.

PURPOSE: To evaluate bone mineral density (BMD) and radiographic and clinical outcomes of patients with varus knee osteoarthritis treated with open wedge high tibial osteotomy (OWHTO). We hypothesised that medial condyle BMD would decrease and lateral condyle BMD would increase after OWHTO. METHODS: Overall, 51 patients (mean age: 65.3 years; female: 40, male: 11) treated with OWHTO were prospectively enrolled. Several angles using whole single-leg radiographs were measured preoperatively and up to 24 months postoperatively. Five square tibial regions of interest (ROI) located below the proximal tibia as T1-T5 from medial to lateral regions and two square femoral ROI as F1 and F2 from medial and lateral regions, respectively, were defined. M/L BMD ratio was used to define the medial-to-lateral condyle BMD ratio. Femoral condyle BMD (F1 and F2) around the knee, as well as lumbar spine, and ipsilateral and contralateral femoral neck BMD, were measured before OWHTO and 3, 6, 12 and 24 months after OWHTO using dual-energy X-ray absorptiometry. Furthermore, tibial condyle BMD (T1-T5) around the knee was measured before and 24 months after OWHTO. Clinical outcomes were evaluated using the Knee Society knee and function scores, the Knee Injury and Osteoarthritis Outcome Score, and the Lysholm score preoperatively and 24 months postoperatively. A power analysis was performed. RESULTS: F1 BMD decreased by 19.2% from before to 3 months postoperatively. F2 BMD did not change up to 24 months after OWHTO. Femoral M/L BMD ratio decreased by 22.2% 3 months after OWHTO. T1 BMD and tibial M/L BMD ratio decreased, whilst T3, T4 and T5 BMD increased 24 months after OWHTO. Mean hip-knee-ankle angle (HKA) and weight-bearing line ratio were corrected from - 6.8° to 4.5° and 14.7 to 60.7%, respectively, postoperatively. Lumbar spine BMD did not change up to 12 months postoperatively. Ipsilateral femoral neck BMD decreased up to 6 months after OWHTO. CONCLUSION: Medial femoral condyle BMD decreased rapidly within 3 months and continued to decrease up to 12 months, but lateral femoral condyle BMD did not change after OWHTO. BMD measurements around the knee condyle enabled the evaluation of the changes in stress distribution before and after OWHTO with accelerated rehabilitation. LEVEL OF EVIDENCE: II.

Lateral Femoral Trochlea Flap Reconstruction of the Proximal Capitate: An Assessment of Congruity and Description of Technique.

PURPOSE: We examined morphologic similarities of the medial lateral femoral trochlea (MFT) and lateral femoral trochlea (LFT) osteochondral flaps for reconstruction of the proximal capitate. METHODS: Magnetic resonance imaging scans of the wrists and ipsilateral knees of 10 young healthy volunteers were obtained. Three morphologic parameters were investigated, comparing the MFT and LFT harvest sites to the capitate proximal pole. The correspondingly relevant surgical planes were compared. The coronal plane radius of curvature (ROC) of the capitate was compared with the sagittal planes of the MFT and LFT. The sagittal plane ROC of the capitate was compared to the axial planes of the MFT and LFT. The angular relationship between the dorsal cortical surface of the capitate and the proximal pole cartilage (proximal dorsal capitate pitch) was compared to the corresponding angles between the cortical bone and convex cartilage on the LFT and MFT. RESULTS: The average ratios of ROC for the coronal planes of the capitate to the MFT (0.61) and LFT (0.58) were similar. The average ratios of ROC for the sagittal planes of the capitate to the MFT (0.57) and LFT (0.86) were also similar. The proximal dorsal capitate pitch demonstrated greater similarity to the corresponding shape of the LFT (angular ratio, 1.01) than to that of the MFT (angular ratio, 0.74). CONCLUSIONS: The LFT and MFT demonstrate similar congruity to the proximal capitate in the sagittal and coronal planes of the wrist. The LFT dorsal pitch closely approximates the relationship of the proximal capitate pole to its dorsal cortical surface. CLINICAL RELEVANCE: In capitate fracture, fracture nonunion, or avascular necrosis, both the MFT and LFT demonstrate similarity to the proximal convex capitate morphology. The relationship between the cortical and chondral surfaces of the LFT is morphologically very similar to that of the proximal capitate.

Femoral condyle resurfacing using an inlay metal implant: low revision rate of 266 patients in a 5-10 years follow-up.

PURPOSE: To assess the clinical outcome and survival of an inlay resurfacing prosthesis for focal femoral condyle chondral and osteochondral defects. METHODS: Two hundred sixty-six patients (mean age, 38.25 years; range 25-56 years) with symptomatic femoral condyle chondral and osteochondral defects were reviewed. The mean follow-up period was 7.3 years (range 5-10 years). The medial femoral condyle was involved in 229 and the lateral condyle in 37 patients. Previous cartilage surgery was done in 235 patients. All patients were treated with focal femoral condyle resurfacing with the HemiCAP® device. The preoperative and the last follow-up values of the Knee Injury and Osteoarthritis Outcome Score (KOOS), Oxford Knee Score (OKS), 36-item Short Form Survey (SF-36) and Visual Analogue Scale (VAS) were examined. Complications, reoperation rate and survival were analyzed. RESULTS: At the last follow-up, all clinical score values showed significant improvement as compared with the corresponding preoperative values (p < 0.001). Age presented a negative correlation with KOOS (p = 0.03) and SF-36 improvement (p = 0.014). Kellgren-Lawrence grade influenced OKS (p = 0.036). BMI, gender, side, medial or lateral condyle and size did not affect the outcome. Patients who had previous biological cartilage procedures demonstrated better clinical improvement in comparison with those that did not have prior surgery (p < 0.05). Survival was 96.2% at 10 years, using as endpoint implant revision or/and progression of osteoarthritis. The cumulative hazard for any-reason reoperation was 12.0%. CONCLUSIONS: Femoral condyle resurfacing using the HemiCAP® device is an effective treatment option to address focal chondral and osteochondral defects. It can be successfully used either as a primary procedure or after prior biological cartilage reconstruction. Subjective clinical outcomes are expected to be good to excellent in mid- to long term, while reoperation and revision rates are low. Progression of osteoarthritis is the most common mode of failure; thus, patient selection is very important. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Medial femoral condyle free flap for carpo-metacarpal instability following hamate comminute fracture.

Complete reconstruction of the hamate bone has been reported in the literature mostly following cancer excision or avascular necrosis. For the exiguity of the tissue deficit, bone grafting has usually been used as treatment option for its rapidity and easiness to perform, even if a variable amount of bone resorption may occur. In traumatic cases, microbial contamination may jeopardize the success of a well performed bone graft and vascularised bone grafts may represent a better reconstructive option. Here we describe the first case reported in the literature of a patient underwent complete hamate reconstruction following trauma with an osseous medial femoral condyle free flap as vascularized arthrodesis between the capitate and the 4th MTC base, in order to stabilize the 4th and 5th finger and the ulnar carpo-metacarpal joint.