In silico toxicity and immunological interactions of components of calcium silicate-based and epoxy resin-based endodontic sealers.

OBJECTIVES: The present study aimed to determine in silico toxicity predictions of test compounds from hydraulic calcium silicate-based sealers (HCSBS) and AH Plus and computationally simulate the interaction between these substances and mediators of periapical inflammation via molecular docking. MATERIALS AND METHODS: All chemical information of the test compounds was obtained from the PubChem site. Predictions for bioavailability and toxicity analyses were determined by the Molinspiration Cheminformatics, pkCSM, ProTox-II and OSIRIS Property Explorer platforms. Molecular docking was performed using the Autodock4 AMDock v.1.5.2 program to analyse interactions between proteins (IL-1ß, IL-6, IL-8, IL-10 and TNF-α) and ligands (calcium silicate hydrate, zirconium oxide, bisphenol-A epoxy resin, dibenzylamine, iron oxide and calcium tungstate) to establish the affinity and bonding mode between systems. RESULTS: Bisphenol-A epoxy resin had the lowest maximum dose tolerated in humans and was the test compound with the largest number of toxicological properties (hepatotoxicity, carcinogenicity and irritant). All systems had favourable molecular docking. However, the ligands bisphenol-A epoxy resin and dibenzylamine had the greatest affinity with the cytokines tested. CONCLUSION: In silico predictions and molecular docking pointed the higher toxicity and greater interaction with mediators of periapical inflammation of the main test compounds from AH Plus compared to those from HCSBS. CLINICAL RELEVANCE: This is the first in silico study involving endodontic materials and may serve as the basis for further research that can generate more data, producing knowledge on the interference of each chemical compound in the composition of different root canal sealers.

Analysis of the cytotoxicity and bioactivity of CeraSeal, BioRoot™ and AH Plus® sealers in pre-osteoblast lineage cells.

BACKGROUND: The objective of the present study was to evaluate in vitro the cytotoxicity and bioactivity of various endodontic sealers (CeraSeal, BioRoot™ and AH Plus®) in pre-osteoblast mouse cells (MC3T3 cells). METHODS: MC3T3 cells (ATCC CRL-2594) were plated in 1 × 104 cells/well in 96-well plates in contact with endodontic sealers at concentrations of 1:10 and 1:100. Cell viability was evaluated by MTT assay after 24 and 48 h. In addition, sealer bioactivity was measured by RT-PCR for mediator of inflammation (Tnf, Ptgs2) and mineralization (Runx2, Msx1, Ssp1 and Dmp1) after 24 h and by Alizarin Red S Assay of mineralization after 28 days. Data were analyzed using one-way ANOVA followed by the Tukey's post-test at a significance level of 5%. RESULTS: BioRoot™ presented 24-hour cytotoxicity (p < 0.05) at 1:10 concentration. In the period of 48 h, no endodontic cement was cytotoxic to the cells compared to the control (p > 0.05). TNF-α gene expression was induced by AH Plus® (p < 0.05), while Ptgs2 was induced by the CeraSeal and BioRoot™ (p < 0.05). The expression of Runx2 was stimulated by BioRoot™ and AH Plus® (p < 0.05). In contrast, the expression of Dmp-1 Dmp1 was higher for the CeraSeal and BioRoot™ (p < 0.05). Nonetheless, the sealers did not impact the formation of mineralization nodules (p > 0.05). CONCLUSION: CeraSeal, BioRoot™ and AH Plus® sealers were not cytotoxic to MC3T3 cells within 48 h, but differentially induced the expression of genes related to inflammation and mineralization without impacting biomineralization by the cells.

[Bionic design, preparation and clinical translation of oral hard tissue restorative materials].

Oral diseases concern almost every individual and are a serious health risk to the population. The restorative treatment of tooth and jaw defects is an important means to achieve oral function and support the appearance of the contour. Based on the principle of "learning from the nature", Deng Xuliang's group of Peking University School and Hospital of Stomatology has proposed a new concept of "microstructural biomimetic design and tissue adaptation of tooth/jaw materials" to address the worldwide problems of difficulty in treating dentine hypersensitivity, poor prognosis of restoration of tooth defects, and vertical bone augmentation of alveolar bone after tooth loss. The group has broken through the bottleneck of multi-stage biomimetic technology from the design of microscopic features to the enhancement of macroscopic effects, and invented key technologies such as crystalline/amorphous multi-level assembly, ion-transportation blocking, and multi-physical properties of the micro-environment reconstruction, etc. The group also pioneered the cationic-hydrogel desensitizer, digital stump and core integrated restorations, and developed new crown and bridge restorative materials, gradient functionalisation guided tissue regeneration membrane, and electrically responsive alveolar bone augmentation restorative membranes, etc. These products have established new clinical strategies for tooth/jaw defect repair and achieved innovative results. In conclusion, the research results of our group have strongly supported the theoretical improvement of stomatology, developed the technical system of oral hard tissue restoration, innovated the clinical treatment strategy, and led the progress of the stomatology industry.

[Sealing effect of GuttaFlow2 in curved root canals].

OBJECTIVE: To evaluate the sealing ability of GuttaFlow2 single cone obturation in curved root canals. METHODS: (1) Slight, moderate and severe curved 3D printed root canals were made. After instrumentation, these samples were randomly divided into 2 groups (n = 10) according to different root canal filling techniques: GuttaFlow2 single cone group (GF2) and AH-Plus warm vertical compation group (WVC). All the samples were sectioned at 2 mm to apex (the apical of the root), 4 mm, 6 mm to apex (the middle of the root) and 8 mm to apex (the coronal of the root). The filling void areas were observed by stereomicroscope, and the percentages of void areas in each section were calculated by ImageJ 1.52a. (2) Forty-eight roots of extracted adult molars were selected. After instrumentation, they were randomly divided into 2 groups (n = 8): GF2 group and WVC group. Before root canal filling, the sea-lers were mixed with Rhodamine B dye for visualization under confocal laser scanning microscope. All samples were sectioned at 2 mm to apex (the apical of the root), 5 mm to apex (the middle of the root) and 8 mm to apex(the coronal of the root). Then, the percentages of sealer penetration into dentinal tubules in each section were calculated. RESULTS: At the apical of the root, there were no obvious voids in slight, moderate and severe curved canals in the GF2 group and the WVC group. There was no significant difference between the two groups (P > 0.05). At the middle of the root, there was no significant difference in the percentages of void areas between the two filling methods, but at the coronal of the root, there were more voids in the slight curved root canal in the GF2 group than in the WVC group, and the difference was significant (P = 0.009). The percentages of sealer penetration into dentinal tubules of slight, moderate and severe curved root canals in the GF2 group were 36.10%, 55.80%, 65.08%, respectively. And they were all higher than those in the WVC group (15.78%, 20.70%, 15.61%), respectively, the difference between the two groups was significant (P = 0.001). At the middle of the root, the percentages of sealer penetration into dentinal tubules of slight and moderate curved root canals in GF2 group were also significantly higher than those in the WVC group (P = 0.001). At the coronal of the root, there was no significant difference between the two groups (P > 0.05). CONCLUSION: GuttaFlow2 filling technique has the same sealing effect on the root canal at the apical and middle of the root as the warm vertical technique, but has a better sealing effect on the dentin tubules, especially for severe curved root canal.

Antibacterial activity and physicochemical properties of a sealer containing copaiba oil.

This study aimed to evaluate the antimicrobial activity and physicochemical properties of a novel dual-cure endodontic sealer containing copaiba oil. The copaiba oil was obtained and characterized by gas chromatography (GC), and the minimum inhibitory concentration (MIC) was performed. The experimental sealers were formulated with copaiba oil concentrations of 0, 0.5, 1, and 2%, and the RealSeal™ (Sybron endo, Orange, USA) and AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany) were used as the commercial references. The antimicrobial activity of the sealers was evaluated by the direct contact test for 1h and 24h. To evaluate the physicochemical properties of the sealers, the degree of conversion, setting time, film thickness, dimensional stability, and radiopacity tests were performed. The data were statistically analyzed by one-way ANOVA and Tukey's test (α = 0.05). Concerning the results, the sealers containing copaiba oil showed antimicrobial activity without harming the physicochemical properties.

Synthesis and characterization of calcium-releasing elastomeric resin-based endodontic sealers.

OBJECTIVES: To evaluate the incorporation of halloysite nanotubes (HNTs) loaded with one of two calcium sources (i.e., calcium hydroxide/CaOH2 or beta-tricalcium phosphate/ß-TCP) on the physicochemical and biological properties of an experimental resin-based dual-cured endodontic sealer. MATERIALS AND METHODS: HNTs were encapsulated with CaOH2 or ß-TCP at 10 wt.%. HNTs containing CaOH2 or ß-TCP were added into the experimental sealers at 50 wt.%. The control sealers were the calcium-free HNT-modified resin-based experimental sealer and AH Plus™, a commercially available endodontic sealer. Degree of conversion, setting time, flow, film thickness, radiopacity, dimensional stability, and calcium ions release were determined. Antibiofilm properties and cytocompatibility of the formulated sealers and commercial control were also evaluated. One and two-way ANOVA analysis followed by Tukey's post hoc test was conducted to evaluate the effect of the independent variable on the evaluated properties. RESULTS: FTIR confirmed the encapsulation of calcium sources into HNTs. Regarding flow and film thickness, the values obtained from these sealers were in accordance with the specifications provided by ISO 6876. For radiopacity, AH Plus™ achieved the highest radiopacity (p<0.05). Among the experimental formulations, all experimental HNT-containing compositions exhibited values below 3 mm Al. The experimental sealers showed greater dimensional changes when compared to the commercial (AH Plus™) control. The release of calcium ions was observed for the HNT_CaOH2 and HNT_ß-TCP sealers without statistical differences. Experimental sealers containing HNT_CaOH2 and HNT_ß-TCP significantly reduced the CFU/mL count and showed cell compatibility. CONCLUSIONS: The findings of this study demonstrate that the incorporation of HNT_CaOH2 or HNT_ß-TCP into resin-based experimental sealers promoted antimicrobial effects and gradual calcium release without impairing cytocompatibility or physicochemical properties of the sealers. Still, an adjustment to reach the minimal radiopacity established by ISO 6876 is needed. CLINICAL RELEVANCE: The experimental resin-based sealers seemed to be an alternative for endodontics. The incorporation of calcium sources exerts promising antimicrobial effects while displaying low cell toxicity.

Assessment of the root filling volume in C-shaped root canal on cone-beam CT and micro-CT in relation to nano-CT.

AIM: To assess the observed volume of filled C-shaped root canals from different CBCT and micro-CT having nano-CT as a reference. MATERIALS AND METHODS: Twelve extracted mandibular molars with C-shaped root canals were endodontically treated using Reciproc Blue R25 (VDW GMBH, Munich, Germany) in a reciprocating system and filled with gutta-percha (Dentsply Maillefer) and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). CBCT scans were performed using 3 units-3D Accuitomo 170 (J. Morita, Kyoto, Japan), ProMax 3D Max (Planmeca, Helsinki, Finland), and NewTom VGi EVO (Cefla QR, Verona, Italy)-at two resolution modes: standard and high. Micro-CT and nano-CT scans were also obtained. The volume of all filled C-shaped root canals was obtained using CTAn software (Bruker, Kontich, Belgium), and the blooming artifact, in relation to nano-CT volume, was calculated. The data were evaluated by the Bland-Altman plots and ANOVA two-way for repeated measures (α = 0.05). RESULTS: All CBCT units and micro-CT showed significantly larger observed volume of root canal filling when compared to nano-CT. The blooming artifact of root canal filling in standard resolution was significantly larger than that in high resolution (p < 0.05) in all CBCT units. CONCLUSIONS: Endodontic filling material with AH Plus sealer causes blooming artifacts in CBCT units and micro-CT. CLINICAL RELEVANCE: Considering the anatomical complexity of C-shaped root canals and the challenges associated with endodontic treatment, CBCT is frequently recommended for follow-up evaluations. However, the presence of endodontic filling material can result in blooming artifacts that may potentially impact the accurate diagnosis of endodontic complications.

Effect of blood contamination on marginal adaptation of cold ceramic and MTA angelus: a scanning electron microscopic study.

BACKGROUND: This study aimed to assess the effect of blood contamination on marginal adaptation of cold ceramic (CC) and mineral trioxide aggregate (MTA) Angelus using scanning electron microscopy (SEM). METHODS: This in vitro experimental study was conducted on 24 extracted single-rooted human teeth. After cleaning and shaping, the root canals were filled with lateral compaction technique. The apical 3 mm of the roots was cut, and cavities with 3 mm depth were created at the apex. The teeth were randomly assigned to two group (n = 12) for the application of CC and MTA Angelus as retrograde filling materials. CC and MTA Angelus were prepared by mixing the powder with blood, and applied in the cavities. After 24 h, their marginal adaptation to the canal walls was assessed by SEM. Data were statistically analyzed by t-test (alpha = 0.05). RESULTS: The mean marginal gap was 8.98 µm in the CC, and 16.26 µm in the MTA Angelus group; this difference was statistically significant (P < 0.001). CONCLUSIONS: The present in vitro study revealed that following complete blood contamination of powder, CC showed significantly superior marginal adaptation than MTA Angelus as shown by SEM assessment.

Biocompatibility of three different root canal sealers, experimental study.

OBJECTIVES: This study was assessed the biocompatibility of three different root canal sealers (Well-Root St, GuttaFlow Bioseal, and AH-Plus) following implantation in rat subcutaneous tissues, using histopathological immunohistochemical analysis. METHODS: Four groups of eighty-four male rats each underwent subcutaneous dorsal implantation of a polyethylene tube, either empty or filled. Tissues were collected, fixed, and processed for histological analysis after 7, 15, and 30 d. Slides were photographed and digitally processed to identify lymphocytes and macrophages using Cluster of differentiation 3 (CD3) and cluster of differentiation 68 (CD68) markers, respectively. P was set at 0.05, when lymphocyte and macrophage infiltration was compared between groups and observation times using one-way analysis of variance (ANOVA). RESULTS: Histopathological analysis of all groups revealed an inflammatory reaction followed by the emergence of a fibrous capsule after 7 days. After 30 days, the thickness of the fibrous capsule and the inflammatory response subsided. CD3 staining for immunohistochemical analysis revealed that the AH-Plus group had the highest mean percentage of lymphocyte infiltration at 7 and 15 days, followed by the Well-Root St, GuttaFlow Bioseal, and Control groups. After 30 days, no discernible difference was observed between the groups in terms of the mean percentage of lymphocyte infiltration. After 7, 15, and 30 days, there was a significant difference in the mean percentage of macrophage infiltration across the groups, as demonstrated by CD68 staining. After 7, 15, and 30 days, the AH-Plus group had the highest mean percentage of macrophage infiltration, followed by the Well-Root St. and GuttaFlow Bioseal groups, while the control group had the lowest mean percentage. CONCLUSION: All observational periods showed minimal inflammatory reactions to GuttaFlow Bioseal. After subcutaneous tissue implantation in a rat model, the initial inflammatory reactions to Well-Root St and AH-Plus had abated by day 30, and all tested sealers had outstanding biocompatibility.

A critical analysis of research methods and experimental models to study root canal fillings.

Canal filling materials and techniques have been one of the most studied topics in Endodontics. A simple search using the mesh term "root canal filling" in PubMed revealed more than 11 000 articles, an impressive number that is much higher than "root canal disinfection" (5544 articles) or even the popular "root canal preparation" (8527 articles). The overriding importance attributed to root filling procedures is not merely intuitive. It derived from the appealing relevance given by the appearance of the white lines in common radiographs grounded on retrospective clinical data that had identified the quality of a root filling as one of the major causes of treatment failure (lack of healing). Since the publication of the Washington study, impressive efforts have been made for the release of new materials and techniques, as well as, for the development of a plethora of laboratory methods to assess the quality of root filling procedures. This narrative review aims to address and discuss the most relevant laboratory methods to assess the root canal filling. As filling quality improvements have not translated into higher success rates, as reported in longitudinal clinical studies, more than to deliver a simple methodology-based review, this paper aims to present an in-depth critical view on the assessment of laboratory methods used to study the filling materials and techniques. Recent data indicate that the long-term dimensional stability/degradation over time of endodontic sealers plays a central role in the treatment outcome. In this context, laboratory methods should be developed focusing on predicting, at least to some degree, the long-term clinical behaviour of root canal fillings, rather than simply ranking different materials or techniques.

Comparison of the efficacy of three different supplementary cleaning protocols in root-filled teeth with a bioceramic sealer after retreatment-a micro-computed tomographic study.

OBJECTIVE: The present study evaluated the efficacy of three different supplementary cleaning protocols on the removal of bioceramic-based root canal filling materials from oval-shaped canals. MATERIALS AND METHODS: A total of 36 human mandibular premolars were instrumented and obturated with gutta-percha and iRoot SP using the single-cone technique. Retreatment was performed with ProTaper Universal retreatment files. The samples were randomly divided into the following supplementary cleaning protocols: conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and XP-endo Finisher R (XPR). The samples underwent micro-CT scanning to quantify the amount of residual filling materials after retreatment and after performing the cleaning protocols. The volume of filling material removal was analyzed by one-way analysis of variance and post hoc Bonferroni and Games-Howell tests (P < 0.05). RESULTS: There were significant differences in the amount of root canal filling material removal in every comparison group (P < 0.05). The XPR removed significantly more residual filling materials (P < 0.01) followed by PUI and CSI (P < 0.05). Similar efficacy was found in the total root canal and all root thirds. CONCLUSIONS: The additional use of XP-endo Finisher R and passive ultrasonic irrigation effectively removed the bioceramic-obturated root filling materials from the oval-shaped canals. However, none of the techniques completely removed the filling materials. CLINICAL RELEVANCE: The XP-endo Finisher R and passive ultrasonic irrigation exhibited greater efficacy compared with syringe irrigation in the reduction of residual filling materials after retreatment in root-filled teeth with a bioceramic sealer.

Effect of obturation technique on penetration of calcium silicate-based sealer into dentinal tubules after endodontic retreatment of mandibular premolars.

OBJECTIVE: Confocal laser scanning microscopy (CLSM) was used to investigate the penetration of endodontic sealers into the dentinal tubules after retreatment using two different obturation techniques. MATERIALS AND METHODS: Thirty mandibular premolars were prepared up to instrument F3 (ProTaper Universal, Dentsply) and filled with Endofill using the single cone technique. The canals were retreated using Mtwo instruments. Reobturation was performed with the Bio-C sealer mixed with a fluorophore dye (Fluo-3) using either the lateral condensation technique (group LC) or the single cone technique (group SC) (n = 15). Teeth were sectioned 2, 4, and 6 mm from the apex and analyzed with CLSM to assess the penetration of the sealer into the canal perimeter and the maximum depth of penetration of the sealer into the dentinal tubules. Data were analyzed using ANOVA and the Student-t and Holm-Sidak tests. RESULTS: In the apical segment, the penetrated perimeter was significantly higher in the LC group than in the SC group (p < 0.05); no significant difference was found in the middle and cervical segments (p > 0.05). In terms of penetration depth, no significant differences were found for any of the segments studied (p > 0.05). CONCLUSION: The LC technique promoted a higher percentage of canal circumference penetrated by the sealer than the SC technique in the apical segment after endodontic retreatment. CLINICAL RELEVANCE: CLSM demonstrated that the LC technique promoted a higher percentage of canal perimeter penetrated by the Bio-C sealer than the SC technique in the apical segment of mandibular premolars after retreatment.

The Influence of the Matrix on the Apatite-Forming Ability of Calcium Containing Polydimethylsiloxane-Based Cements for Endodontics.

This study aimed to characterize the chemical properties and bioactivity of an endodontic sealer (GuttaFlow Bioseal) based on polydimethylsiloxane (PDMS) and containing a calcium bioglass as a doping agent. Commercial PDMS-based cement free from calcium bioglass (GuttaFlow 2 and RoekoSeal) were characterized for comparison as well as GuttaFlow 2 doped with dicalcium phosphate dihydrate, hydroxyapatite, or a tricalcium silicate-based cement. IR and Raman analyses were performed on fresh materials as well as after aging tests in Hank's Balanced Salt Solution (28 d, 37 °C). Under these conditions, the strengthening of the 970 cm−1 Raman band and the appearance of the IR components at 1455−1414, 1015, 868, and 600−559 cm−1 revealed the deposition of B-type carbonated apatite. The Raman I970/I638 and IR A1010/A1258 ratios (markers of apatite-forming ability) showed that bioactivity decreased along with the series: GuttaFlow Bioseal > GuttaFlow 2 > RoekoSeal. The PDMS matrix played a relevant role in bioactivity; in GuttaFlow 2, the crosslinking degree was favorable for Ca2+ adsorption/complexation and the formation of a thin calcium phosphate layer. In the less crosslinked RoekoSeal, such processes did not occur. The doped cements showed bioactivity higher than GuttaFlow 2, suggesting that the particles of the mineralizing agents are spontaneously exposed on the cement surface, although the hydrophobicity of the PDMS matrix slowed down apatite deposition. Relevant properties in the endodontic practice (i.e., setting time, radiopacity, apatite-forming ability) were related to material composition and the crosslinking degree.

Filling Materials Efficacy on Preventing Biofilm Formation Inside Screw Access Channels of Implant Abutments.

The choice of the material used to fill screw access channels in implant-supported prostheses depends, in most cases, on operator's preference, without considering the susceptibility of biofilm colonization. Therefore, the aim of this study was to determine and compare the total amount of biofilm formed on different materials used to fill screw access channels in implant abutments. For this propose, titanium implant analogs were attached on abutments and divided into 5 groups: positive control (no filling material); negative control (closed with resin); and filled with cotton, gutta-percha, or polytetrafluoroethylene (PTFE). The analogs with attached abutments were then immersed in a brain heart infusion medium containing Candida albicans (strain 10231 from American Type Culture Collection [ATCC]) and incubated aerobically at 37°C with gentle agitation. After 15 days, materials were removed, and total viable biofilm on each material was quantified by methyl tetrazolium reduction assay at 490 nm. All experiments were performed in triplicate. Data were processed by IBM SPSS Statistic software using 1-way analysis of variance and Bonferroni post hoc tests to analyze differences between groups, with an overall significance level of P < .001. A significant difference was observed between cotton and gutta-percha (P < .017) and between cotton and PTFE (P < .025). However, there was no statistical difference between gutta-percha and PTFE (P > .050). Thus, this in vitro experiment showed that gutta-percha and PTFE presented lower biofilm formation compared with cotton when used to fill screw access channels. These results can provide a basis for future clinical studies that can be a guide to decreasing the occurrence of gaps and bacterial growth inside the implant/abutment attachment site. In addition, controlled in vivo studies are necessary to confirm the clinical viability of findings of this study.

Effectiveness of reciprocating and rotary retreatment files in the removal of endodontic filling material.

The aim of this study was to compare the effectiveness of a reciprocating file (Reciproc) and a rotary retreatment file (Mtwo retreatment [Mtwo-R]) for the removal of filling material during root canal retreatment. A total of 30 mandibular molars with a mesial root curvature between 20° and 40° were selected and prepared using a Reciproc R25 file. The canals were filled using the lateral condensation technique and a root canal sealer. The specimens were randomly allocated into 2 groups according to the retreatment technique used (n = 15): a Reciproc R25 file or Mtwo-R 15/.05 and 25/.05 files. After retreatment, the specimens were longitudinally sectioned and photographed with an operating microscope under ×10 magnification. The percentage of total remaining filling material and the percentages in the cervical, middle, and apical thirds of the specimens were calculated. The Student t test was used for statistical comparisons of the 2 groups, and the analysis of variance followed by Tukey test was used to verify differences among the root thirds within each group. No statistically significant difference between the 2 groups was detected in the percentage of total remaining filling material (P = 0.87) or the percentage in any of the thirds of the root canals (P > 0.05) after reinstrumentation. In both groups, there was a significantly greater amount of remaining material in the apical third (P < 0.05). The results suggested that there is no difference between the 2 systems in their effectiveness at removing filling material.

Intratubular Sealer Penetration: Scanning Electron Microscopy Associated with Cathodoluminescence Analysis.

AIM: The aim of the study was to compare the ability of three endodontic sealers, Endofill (END), AH Plus (AHP), and Sealer Plus BC (SPB), to penetrate dentinal tubules. MATERIALS AND METHODS: Forty-five human teeth, single-rooted and previously instrumented mandibular premolars, were randomly divided into three experimental groups (n = 15): END (n = 15), AHP (n = 15), and SPB (n = 15). After obturation, dental sections were performed horizontally, at 2 and 5 mm from the root apex. The samples were analyzed by scanning electron microscopy associated with cathodoluminescence. Percentage penetration (PP%) and maximum penetration depth (MPD) of the sealers were evaluated by the Kruskal-Wallis and Mann-Whitney tests, for general and paired data, respectively. The Wilcoxon test was applied to analyze the differences between the 5 and 2 mm distances. A 5% significance level was adopted. RESULTS: As for PP%, AHP and SPB were similar (p = 0.127) and presented higher values than END (AHP, p = 0.024 and SPB, p <0.001); with regard to MPD, AHP and SPB did not differ either (p = 0.450), but were higher than END (p <0.001); in both analyses, penetration was greater at 5 mm than at 2 mm (p <0.001). CONCLUSION: SPB showed satisfactory performance in penetrating dentinal tubules, being similar to AHP, and superior to END. CLINICAL SIGNIFICANCE: Greater penetration of sealer into the dentinal tubules may increase the chance of successful endodontic treatment.

Evolution of endodontic medicine: a critical narrative review of the interrelationship between endodontics and systemic pathological conditions.

Endodontics has gained emphasis in the scientific community in recent years due to the increase in clinical and in animal models studies focused on endodontic medicine, which aims to evaluate the interrelationship between systemic and periapical tissues pathological conditions. These studies have shown that systemic changes can boost the pathogenesis of endodontic infection, favoring its development and progression. A contrary relationship is reported in numerous studies that affirm the potential of endodontic infection to trigger systemic damage and may lead to the worsening of pre-existing pathologies. Recently, the potential of filling materials to develop systemic changes such as neurological alterations had been evaluated, also showing that systemic diseases can negatively influence tissue responses to filling materials after endodontic treatment. Despite advances in endodontic medicine studies, there are still gaps in knowledge on the mechanisms of interactions between apical periodontitis (AP) and systemic diseases and much research to be done. In this sense, this critical narrative literature review aimed to show the evolution of studies in endodontic medicine to help the endodontist to know the role of systemic diseases in the pathogenesis of AP and the possible interference in the repair of periapical tissues after endodontic treatment, as well as to evidence the systemic complications that can be triggered or aggravated in the presence of endodontic infection.

A Potential Filling Material for Wound Healing and Shaping: Acellular Dermal Matrix Combined with Autologous Dermis.

BACKGROUND: The currently used subcutaneous fillers are not effective enough. The use of autologous tissues or cells will reduce immune rejection and increase the stability of the fillers, while increasing the absorbability of filling materials. To establish a durable and safe filling material, we herein combined acellular dermal matrix (ADM) with autologous dermal cells and tested the performance of this matrix in wound healing and shaping. METHODS: To prepare the ADM, stratified skin was obtained from the back of two New Zealand rabbits and decellularized to obtain ADM. The ADM was ultrasonically mixed with as-prepared autologous dermis in vitro. The mixture was injected as a subcutaneous filler into the back area of 20 New Zealand rabbits. In this procedure, different concentration ratios of the mixture were injected, and the volume change of the filler was measured and categorized into five groups. At 4 months and 8 months after filling, samples were obtained for quantitative evaluation of the thickness and vessel density, as well as qualitative evaluation of colonization. RESULTS: Examination of the ADM conformed that the matrix had no cells. ADM and the prepared autologous dermis were evenly mixed, and the filler was gradually absorbed. The comprehensive evaluation of ADM and autologous dermis mixture showed that group C had the best filling effect with the least infiltration of inflammatory cells and the highest vascular density compared to A, B, D and E groups in the study. CONCLUSION: When combined at the ratio of 50%:50%, the autologous dermis combined and acellular dermal matrix showed better performance compared to the other four different ratios in this study. This implies that this combination is potentially safer, effective and stable as a filling material compared to ADM or dermal matrix alone. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

[Manifestations of allergic reactions occurring at a dental appointment]. / Proyavleniya allergicheskikh reaktsii, voznikayushchikh na stomatologicheskom prieme.

OBJECTIVE: To analyze the data of modern scientific literature to conduct a study on identifying the true allergic reaction at a dental appointment. MATERIAL AND METHODS: The article is based on the study of materials from domestic and foreign research databases eLibrary, PubMed, Cochrane Database Systematic Reviews. The research period is 15 years. RESULTS: Among dental materials, the most common allergens are local anesthetics, metal alloys, components of composite materials, latex. CONCLUSION: If allergy is suspected, it is necessary to carefully collect an anamnesis and conduct a clinical examination of the patient with the involvement of specialist doctors, with the recommendation of skin tests and test subcutaneous provocation.

Physico-chemical and antimicrobial properties and the shelf life of experimental endodontic sealers containing metal methacrylates.

The objective of this study was to evaluate the physico-chemical and antimicrobial properties of a dual polymerization experimental endodontic sealer (E) and experimental sealers containing dibutyltin methacrylate (Sn2+) (ETs) or calcium methacrylate (Ca2+) (ECs). The pH and ion release levels of the sealers were measured. The dimensional stability was evaluated in accordance with ISO 6876. Biofilm growth inhibition was evaluated using confocal laser scanning microscopy (CLSM). Biofilm viability analysis was performed using the SYTO 9 technique. The shelf life was evaluated through the degree of conversion and film thickness tests after the sealers had been stored for different periods of time. For statistical analysis, ANOVA and Tukey's post hoc test were used, with a significance level of 5%. ETs revealed better anti-biofilm potential after 15 days than that of the controls. The degree of conversion was reduced after the shelf-life period. The addition of calcium and dibutyltin methacrylate improved the anti-biofilm properties of the experimental endodontic sealer without impairing their physico-chemical properties.