Mutations in the genes responsible for the synthesis of furan fatty acids resolve the light-induced off-odor in soybean oil.

Soybean oil is the second most produced edible vegetable oil and is used for many edible and industrial materials. Unfortunately, it has the disadvantage of 'reversion flavor' under photooxidative conditions, which produces an off-odor and decreases the quality of edible oil. Reversion flavor and off-odor are caused by minor fatty acids in the triacylglycerol of soybean oil known as furan fatty acids, which produce 3-methyl-2,4-nonanedione (3-MND) upon photooxidation. As a solution to this problem, a reduction in furan fatty acids leads to a decrease in 3-MND, resulting in a reduction in the off-odor induced by light exposure. However, there are no reports on the genes related to the biosynthesis of furan fatty acids in soybean oil. In this study, four mutant lines showing low or no furan fatty acid levels in soybean seeds were isolated from a soybean mutant library. Positional cloning experiments and homology search analysis identified two genes responsible for furan fatty acid biosynthesis in soybean: Glyma.20G201400 and Glyma.04G054100. Ectopic expression of both genes produced furan fatty acids in transgenic soybean hairy roots. The structure of these genes is different from that of the furan fatty acid biosynthetic genes in photosynthetic bacteria. Homologs of these two group of genes are widely conserved in the plant kingdom. The purified oil from the furan fatty acid mutant lines had lower amounts of 3-MND and reduced off-odor after light exposure, compared with oil from the wild-type.

Prediction of a Novel Electromechanical Response in Polar Polymers with Rigid Backbones: Contrasting Furan-Derived Nanothreads to Poly(Vinylidene Fluoride).

Syn furan nanothreads have all oxygen atoms arranged on one side of the thread backbone; these polar threads present intriguing opportunities in electromechanical response owing to their rigid ladder-like backbone. We retrained a C/H/O reactive force field to simulate their response to external electric field for both end-anchored individual threads and bulk nanothread crystals, contrasting the results to those for poly(vinylidene fluoride) (PVDF) polymer. Whereas the field induces a length-independent torque in PVDF through backbone rotation about σ bonds, furan-derived nanothreads generate a length-dependent torque by progressively twisting their rigid backbone. This mode of response couples the rotational history of the electric field to axial tension in the anchored thread. In simulations of densely packed syn furan nanothread crystals without anchors, the crystals pole in a field (∼3 GV/m at 300 K) similar to that seen in simulations of PVDF, suggesting that crystals of polar nanothreads can be ferroelectric.

Aerobic Catalytic Cross-Dehydrogenative Coupling of Furans with Indoles Provides Access to Fluorophores with Large Stokes Shift.

Sustainability in chemical processes is a crucial aspect in contemporary chemistry with sustainable catalysis as a vital parameter of the same. There has been a renewed focus on utilizing earth-abundant metal catalysts to expand the repertoire of organic reactions. Furan is a versatile heterocycle of natural origin used for multiple applications. However, it has scarcely been used in cross-dehydrogenative coupling. In this work, we have explored the cross-dehydrogentive coupling of furans with indoles using commonly available, inexpensive FeCl3 ⋅ 6H2 O (<0.25 $/g) as catalyst in the presence of so called 'ultimate oxidant' - oxygen, without the need for any external ligand or additive. The reactions were found to be scalable and to work even under partially aqueous conditions. This makes the reaction highly economical, practical, operationally simple and sustainable. The methodology provides direct access to π-conjugated short oligomers consisting of furan, thiophene and indole. These compounds were found to show interesting fluorescence properties with remarkably large Stokes shift (up to 205 nm). Mechanistic investigations reveal that the reaction proceeds through chemoselective oxidation of indole by the metal catalyst followed by nucleophilic trapping by furan.

Boosting Circularly Polarized Luminescence from Alkyl-Locked Axial Chirality Scaffold by Restriction of Molecular Motions.

Boosting the circularly polarized luminescence of small organic molecules has been a stubborn challenge because of weak structure rigidity and dynamic molecular motions. To investigate and eliminate these factors, here, we carried out the structure-property relationship studies on a newly-developed axial chiral scaffold of bidibenzo[b,d]furan. The molecular rigidity was finely tuned by gradually reducing the alkyl-chain length. The environmental factors were considered in solution, crystal, and polymer matrix at different temperatures. As a result, a significant amplification of the dissymmetry factor glum from 10-4 to 10-1 was achieved, corresponding to the situation from (R)-4C in solution to (R)-1C in polymer film at room temperature. A synergistic strategy of increasing the intramolecular rigidity and enhancing the intermolecular interaction to restrict the molecular motions was thus proposed to improve circularly polarized luminescence. The though-out demonstrated relationship will be of great importance for the development of high-performance small organic chiroptical systems in the future.

Supramolecular Polymer Network based on Electrophilic Substitution (ES) Adduct of Furan-Triazolinedione.

Polymers with furan functionality have been the subject of extensive research on developing sustainable materials applying a limited number of dynamic covalent approaches. Herein, we introduce a facile, dynamic non-covalent approach to make a furan polymer readily accessible for self-healing applications based on its electrophilic substitution (ES) with a commercially available 1,2,4-triazoline-3,5-dione (TAD) derivative, 4-phenyl-TAD (PTAD). A tailor-made furan polymer, poly(furfuryl methacrylate) (PFMA), considering it an initial illustrative example, was rapidly ES modified with PTAD to produce furfuryl-tagged triazolidine that subsequently associated via inter-molecular hydrogen (H-) bonding to produce a thermally reversible supramolecular polymer network under ambient conditions. The H-bonded network was experimentally quantified via ATR-IR analysis and theoretically rationalized via the density functional theory (DFT) study using smaller organic model compounds analogous to the macromolecular system. Thermoreversible feature of the H-bonded triazolidine-derived supramolecular polymer network enabled the solution reprocessing and self-healing of the polymer material.

Green synthesis of (S)-1-(furan-2-yl)propan-1-ol from asymmetric bioreduction of 1-(furan-2-yl)propan-1-one using whole-cell of Lactobacillus paracasei BD101.

Chiral heterocyclic alcohols are important precursors for production of pharmaceutical medicines and natural products. (S)-1-(furan-2-yl)propan-1-ol ((S)-2) can be used production of pyranone, which can be used in the synthesis of sugar analogues, antibiotics, tirantamycines, and anticancer drugs. The synthetic approaches for (S)-2, however, have substantial difficulties in terms of inadequate enantiomeric excess (ee) and gram scale synthesis. Moreover, the biocatalytic synthesis of (S)-2 is unknown until now. In this study, the synthesis of (S)-2 was carried out by performing the asymmetric bioreduction of 1-(furan-2-yl)propan-1-one (1) using the Lactobacillus paracasei BD101 biocatalyst obtained from boza, a grain-based fermented beverage. (S)-2 was obtained with >99% conversion, >99% ee, and 96% yield under the optimized conditions. Furthermore, in 50 h, 8.37 g of 1 was entirely transformed into (S)-2 on gram scale (96% isolated yield, 8.11 g). This is the first report on the high-gram scale biocatalyzed synthesis of enantiopure (S)-2. These data suggest that L. paracasei BD101 can be used to bioreduction of 1 in gram scale and efficiently produce (S)-2. Furthermore, these findings laid the base for future study into the biocatalytic production of (S)-2. It was particularly notable as it was the highest known to date optical purity of (S)-2 generated by asymmetric reduction using a biocatalyst. This work offers a productive environmentally friendly method for producing (S)-2 using biocatalysts.

Validation of putative biomarkers of furan exposure through quantitative analysis of furan metabolites in urine of F344 rats exposed to stable isotope labeled furan.

Humans are chronically exposed to furan, a potent liver toxicant and carcinogen that occurs in a variety of heat-processed foods. Assessment of human exposure based on the furan content in foods is, however, subject to some uncertainty due to the high volatility of furan. Biomarker monitoring is thus considered an alternative or complementary approach to furan exposure assessment. Previous work suggested that urinary furan metabolites derived from the reaction of cis-2-butene-1,4-dial (BDA), the reactive intermediate of furan, with glutathione (GSH) or amino acids may serve as potential biomarkers of furan exposure. However, some metabolites were also reported to occur in urine of untreated animals, indicating either background contamination via animal feed or endogenous sources, which may limit their suitability as biomarkers of exposure. The overall aim of the present study was to accurately establish the correlation between external dose and concentration of furan metabolites in urine over time and to discriminate against endogenous formation and furan intake via feed. To this end, the furan metabolites GSH-BDA (N-[4-carboxy-4-(3-mercapto-1H-pyrrol-1-yl)-1-oxobutyl]-L-cysteinylglycine), NAcLys-BDA (R-2-(acetylamino)-6-(2,5-dihydro-2-oxo-1H-pyrrol-1-yl)-1-hexanoic acid), NAcCys-BDA-NAcLys (N-acetyl-S-[1-[5-(acetylamino)-5-carboxypentyl]-1H-pyrrol-3-yl]-L-cysteine) and NAcCys-BDA-NAcLys sulfoxide (N-acetyl-S-[1-[5-(acetylamino)-5-carboxypentyl]-1H-pyrrol-3-yl]-L-cysteine sulfoxide) were simultaneously analyzed by stable isotope dilution ESI-LC-MS/MS as unlabeled and [13C4]-furan dependent metabolites following oral administration of a single oral dose of isotopically labelled [13C4]-furan (0.1, 1, 10, 100 and 1000 µg/kg bw) to male and female F344/DuCrl rats. Although a linear correlation between urinary excretion of [13C4]-furan-dependent metabolites was observed, analysis of unlabeled NAcLys-BDA, NAcCys-BDA-NAcLys and NAcCys-BDA-NAcLys sulfoxide revealed substantial, fairly constant urinary background levels throughout the course of the study. Analysis of furan in animal feed excluded feed as a source for these background levels. GSH-BDA was identified as the only furan metabolite without background occurrence, suggesting that it may present a specific biomarker to monitor external furan exposure. Studies in humans are now needed to establish if analysis of urinary GSH-BDA may provide reliable exposure estimates.

Inflammation mediates the association between furan exposure and the prevalence and mortality of chronic obstructive pulmonary disease: National Health and Nutrition Examination Survey 2013-2018.

BACKGROUND: Although extensive research has established associations between chronic obstructive pulmonary disease (COPD) and environmental pollutants, the connection between furan and COPD remains unclear. This study aimed to explore the association between furan and COPD while investigating potential mechanisms. METHODS: The study involved 7,482 adults from the National Health and Nutrition Examination Survey 2013-2018. Exposure to furan was assessed using blood furan levels. Participants were categorized into five groups based on quartiles of log10-transformed blood furan levels. Logistic regression and restricted cubic spline regression models were used to assess the association between furan exposure and COPD risk. Mediating analysis was performed to assess the contribution of inflammation to the effects of furan exposure on COPD prevalence. Cox regression was used to assess the association between furan exposure and the prognosis of COPD. RESULTS: Participants with COPD exhibited higher blood furan levels compared to those without COPD (P < 0.001). Log10-transformed blood furan levels were independently associated with an increased COPD risk after adjusting for all covariates (Q5 vs. Q1: OR = 4.47, 95% CI = 1.58-12.66, P = 0.006, P for trend = 0.001). Inflammatory cells such as monocytes, neutrophils, and basophils were identified as mediators in the relationship between furan exposure and COPD prevalence, with mediated proportions of 8.73%, 20.90%, and 10.94%, respectively (all P < 0.05). Moreover, multivariate Cox regression analysis revealed a positive correlation between log10-transformed blood furan levels and respiratory mortality in COPD patients (HR = 41.00, 95% CI = 3.70-460.00, P = 0.003). CONCLUSIONS: Exposure to furan demonstrates a positive correlation with both the prevalence and respiratory mortality of COPD, with inflammation identified as a crucial mediator in this relationship.

Molecular Docking, Synthesis, and Characterization of Furanyl-Pyrazolyl Acetamide and 2,4-Thiazolidinyl-Furan-3-Carboxamide Derivatives as Neuroinflammatory Protective Agents.

Microglia are key immune cells in the brain that maintain homeostasis and defend against immune threats. Targeting the dysfunctional microglia is one of the most promising approaches to inhibit neuroinflammation. In the current study, a diverse series of molecular hybrids were designed and screened through molecular docking against two neuroinflammatory targets, namely HMGB1 (2LY4) and HMGB1 Box A (4QR9) proteins. Based on the outcomes of docking scores fifteen compounds; ten furanyl-pyrazolyl acetamides 11(a-j), and five 2,4-thiazolidinyl-furan-3-carboxamide 15(a-e) derivatives were selected for further synthesis, followed by biological evaluation. The selected compounds, 11(a-j) and 15(a-e) were successfully synthesized with moderate to good yields, and structures were confirmed by IR, NMR, and mass spectra. The in-vitro cytotoxicity was evaluated on microglial cells namely BV-2, N-9, HMO6, leukemic HAP1, and human fibroblast cells. Further western-blot analysis revealed that 11h, 11f, 11c, 11j, 15d, 15c, 15e, and 15b compounds significantly suppressed anti-inflammatory markers such as TNF-α, IL-1, IL-6, and Bcl-2. All derivatives were moderate in potency compared to reference doxorubicin and could potentially act as novel anti-neuroinflammatory agents. This study can act as a beacon for further research in the application of furan-pyrazole and furan-2,4-thiazolidinediones as lead moieties for anti-neuroinflammatory and related diseases.

Dihydrophenanthro[b]furan derivatives from the tubers of Bletilla striata.

Two pairs of new dihydrophenanthro[b]furan enantiomers blephebibnols G-H (1-2), one new dihydrophenanthro[b]furan derivative blephebibnol I (3), along with four known analogues (4-7), were isolated from the tubers of Bletilla striata. Their structures including the absolute configurations were determined by the combination of spectroscopic data analysis, ECD and NMR calculations. Compounds 1a, 1b, and 2b showed inhibition of NO production in LPS-stimulated BV-2 cells, with IC50 values ranging from 4.11 to 14.65 µM. Further mechanistic study revealed that 1a suppressed the phosphorylation of p65 subunit to regulate the NF-κB signaling pathway. In addition, some compounds displayed selective cytotoxic activities against HCT-116, HepG2, A549, or HGC27 cancer cell lines with IC50 values ranging from 0.1 to 8.23 µM.

A Comprehensive Evaluation of Dioxins and Furans Occurrence in River Sediments from a Secondary Steel Recycling Craft Village in Northern Vietnam.

This first study investigated the presence of dioxins and furans in river sediments around a craft village in Vietnam, focusing on Secondary Steel Recycling. Sediment samples were collected from various locations along the riverbed near the Da Hoi Secondary Steel Recycling village in Bac Ninh province. The analysis was conducted using a HRGC/HRMS-DFS device, detecting a total of 17 dioxin/furan isomers in all samples, with an average total concentration of 288.86 ng/kg d.w. The concentrations of dioxin/furan congeners showed minimal variation among sediment samples, ranging from 253.9 to 344.2 ng/kg d.w. The predominant compounds in the dioxin group were OCDD, while in the furan group, they were 1,2,3,4,6,7,8-HpCDF and OCDF. The chlorine content in the molecule appeared to be closely related to the concentration of dioxins and their percentage distribution. However, the levels of furan isomers did not vary significantly. The distribution of these compounds was not dependent on the flow direction, as they were mainly found in solid waste and are not water-soluble. Although the hepta and octa congeners had high concentrations, when converted to TEQ values, the tetra and penta groups (for dioxins) and the penta and hexa groups (for furans) contributed more to toxicity. Furthermore, the source of dioxins in sediments at Da Hoi does not only originate from steel recycling production activities but also from other combustion sites. The average total toxicity was 10.92 ng TEQ/kg d.w, ranging from 4.99 to 17.88 ng TEQ/kg d.w, which did not exceed the threshold specified in QCVN 43:2017/BTNMT, the National Technical Regulation on Sediment Quality. Nonetheless, these levels are still concerning. The presence of these toxic substances not only impacts aquatic organisms in the sampled water environment but also poses potential health risks to residents living nearby.

Formation and Reactions of Brønsted and Lewis Acid Adducts with Electron-Rich Heteroaromatic Compounds.

Electron-rich heteroaromatics, such as furan, thiophene and pyrrole, as well as their benzo-condensed derivatives, are of great interest as components of natural products and as starting substances for various products including high-tech materials. Although their reactions with Brønsted and Lewis acids play important roles, in particular as the primary step of various transformations, they are often disregarded and mechanistically not understood. The present publication gives a first overview about this chemistry focusing on the parent compounds. It comprises reactions with strong Brønsted acids forming adducts that can undergo intramolecular proton and/or substituent transfer reactions, ring openings or ring transformations into other heterocycles, depending on their structure. Interactions with weak Brønsted acids usually initiate oligomerizations/polymerizations. A similar behaviour is observed in reactions of these heteroaromatics with Lewis acids. Special effects are achieved when the Lewis acids are activated through primary protonation. Deuterated Brønsted acids allow straight forward deuteration of electron-rich heteroaromatics. Mercury salts as extremely weak Lewis acids cause direct metalation in a straight forward way replacing ring H-atoms yielding organomercury heterocycles. This review will provide comprehensive information about the chemistry of adducts of such heterocycles with Brønsted and Lewis acids enabling chemists to understand the mechanisms and the potential of this field and to apply the findings in future syntheses.

Novel Thiazole Derivatives Containing Imidazole and Furan Scaffold: Design, Synthesis, Molecular Docking, Antibacterial, and Antioxidant Evaluation.

Carbothioamides 3a,b were generated in high yield by reacting furan imidazolyl ketone 1 with N-arylthiosemicarbazide in EtOH with a catalytic amount of conc. HCl. The reaction of carbothioamides 3a,b with hydrazonyl chlorides 4a-c in EtOH with triethylamine at reflux produced 1,3-thiazole derivatives 6a-f. In a different approach, the 1,3-thiazole derivatives 6b and 6e were produced by reacting 3a and 3b with chloroacetone to afford 8a and 8b, respectively, followed by diazotization with 4-methylbenzenediazonium chloride. The thiourea derivatives 3a and 3b then reacted with ethyl chloroacetate in ethanol with AcONa at reflux to give the thiazolidinone derivatives 10a and 10b. The produced compounds were tested for antioxidant and antibacterial properties. Using phosphomolybdate, promising thiazoles 3a and 6a showed the best antioxidant activities at 1962.48 and 2007.67 µgAAE/g dry samples, respectively. Thiazoles 3a and 8a had the highest antibacterial activity against S. aureus and E. coli with 28, 25 and 27, 28 mm, respectively. Thiazoles 3a and 6d had the best activity against C. albicans with 26 mm and 37 mm, respectively. Thiazole 6c had the highest activity against A. niger, surpassing cyclohexamide. Most compounds demonstrated lower MIC values than neomycin against E. coli, S. aureus and C. albicans. A molecular docking study examined how antimicrobial compounds interact with DNA gyrase B crystal structures. The study found that all of the compounds had good binding energy to the enzymes and reacted similarly to the native inhibitor with the target DNA gyrase B enzymes' key amino acids.

Tailoring the Formation of Functionalized Furans from Glucose in Water with Nature-Sourced Catalysts and In Situ NMR.

Chain elongation of unprotected carbohydrates in water under mild conditions remains a challenge both in chemical and biochemical synthesis. The Knoevenagel addition or condensation enables transformations to bioactive scaffolds for pharmaceutical and agrochemical compounds. Unfortunately, the catalysts in use for these transformations often reduce the green metrics of the transformations. Here, we use in situ NMR visualizations to explore the prospective use of natural catalysts for the synthesis of triple- and quadruple-functionalized furan- or dihydrofuran-derivatives from glucose and malononitrile. The dihydrofuran derivatives are formed as kinetic, major intermediates in the pathway to furan derivatives when using naturally abundant MgO or bio-sourced chitosan and N-Methyl-d-glucamine (meglumine) as the catalysts in water. Both catalyst loading, solvent composition and pH can be adapted to populate dihydrofurans with four substituents by slowing down their further reactions. Higher temperatures and higher pH values favor the formation of triple-functionalized furans over quadruple-substituted dihydrofurans, which may be bicyclic or monocyclic. Compared to more traditional catalysts, nature-sourced options offer more sustainable options that emulate natural processes. Visualization with in situ NMR contributes to streamlining the development of cheap and environmentally benign procedures for carbohydrate chain elongation.

Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: ZSM-5 vs. Y as Catalysts for Friedel-Crafts Acylation Reaction.

Hierarchical ZSM5 and Y zeolites were prepared through a surfactant-mediated strategy with NH4OH changing the duration of the treatment and the amount of CTAB surfactant and taking as reference multiples of the critical micellar concentration (CMC). The materials were characterized using powder X-ray diffraction, N2 adsorption isotherms at -196 °C, and SEM and TEM microscopy. The catalytic performance was evaluated in Friedel-Crafts acylation of furan with acetic anhydride at 80 °C. The alkaline surfactant-mediated treatment had different effects on the two zeolites. For ZSM5, the CTAB molecular aggregates can hardly diffuse inside the medium-size pores, leading mainly to intercrystalline mesoporosity and increased external surface area, with no positive catalytic impact. On the other hand, for large-pore Y zeolite, the CTAB molecular aggregates can easily diffuse and promote the rearrangement of crystal units around micelles, causing the enlargement of the pores, i.e., intracrystalline porosity. The optimized Y-based sample, treated for 12 h with a CTAB amount 32 times the CMC, shows an increase in product yield and rate constant that was not observed when a higher amount of surfactant was added. The reuse of spent catalysts upon thermal treatment at 400 °C shows a regeneration efficiency around 90%, showing good potentialities for the modified catalysts.

Responsive Microgels through RAFT-HDA Dynamic Covalent Bonding Chemistry.

This paper developed a method for preparing ultrasound-responsive microgels based on reversible addition fragmentation chain transfer-hetero Diels-Alder (RAFT-HAD) dynamic covalent bonding. First, a styrene cross-linked network was successfully prepared by a Diels-Alder (DA) reaction between phosphoryl dithioester and furan using double-ended diethoxyphosphoryl dithiocarbonate (BDEPDF) for RAFT reagent-mediated styrene (St) polymerization, with a double-ended dienophile linker and copolymer of furfuryl methacrylate (FMA) and St as the dienophile. Subsequently, the microgel system was constructed by the HDA reaction between phosphoryl disulfide and furan groups using the copolymer of polyethylene glycol monomethyl ether acrylate (OEGMA) and FMA as the dienophore building block and hydrophilic segment and the polystyrene pro-dienophile linker as the cross-linker and hydrophobic segment. The number of furans in the dienophile chain and the length of the dienophile linker were regulated by RAFT polymerization to investigate the effects of the single-molecule chain functional group degree, furan/dithioester ratio, and hydrophobic cross-linker length on the microgel system. The prepared microgels can achieve the reversible transformation of materials under force responsiveness, and their preparation steps are simple and adaptive to various potential applications in biomedical materials and adaptive electrical materials.

Multi-Component Syntheses of Spiro[furan-2,3'-indoline]-3-carboxylate Derivatives Using Ionic Liquid Catalysts.

Two previously described Brønsted acidic ionic liquids, 3,3'-(1,6-hexanediyl)bis(1-methyl)-1H-imidazolium hydrogen sulfate (Cat1) and 1,1'-(1,6-hexanediyl)bis(pyridinium) hydrogen sulfate (Cat2), were used as catalysts for the preparation of spiro[furan-2,3'-indoline]-3-carboxylate derivatives via a three-component reaction of anilines, isatins (N-alkyl-indoline-2,3-diones), and diethyl acetylenedicarboxylate, in high yields. The use of ultrasonic (US) irradiation led to the targeted products (1a-15a) in high yields ranging from 80% to 98%. Under the same conditions, the use of sulfuric acid and acetic acid as a Brønstedt catalyst did not yield the desired benchmark product 1a.

Design and Catalytic Asymmetric Synthesis of Furan-Indole Compounds Bearing both Axial and Central Chirality.

In the chemistry community, catalytic asymmetric synthesis of furan-based compounds bearing both axial and central chirality has proven to be a significant but challenging issue owing to the importance and difficulty in constructing such frameworks. In this work, we have realized the first catalytic asymmetric synthesis of five-five-membered furan-based compounds bearing both axial and central chirality via organocatalytic asymmetric (2+4) annulation of achiral furan-indoles with 2,3-indolyldimethanols with uncommon regioselectivity. By this strategy, furan-indole compounds bearing both axial and central chirality were synthesized in high yields with excellent regio-, diastereo-, and enantioselectivities. Moreover, theoretical calculations were conducted to provide an in-depth understanding of the reaction pathway, activation mode, and the origin of the selectivity.

A Diels-Alder probe for discovery of natural products containing furan moieties.

Natural products (NPs) are fantastic sources of inspiration for novel pharmaceuticals, oftentimes showing unique bioactivity against interesting targets. Specifically, NPs containing furan moieties show activity against a variety of diseases including fungal infections, and cancers. However, it is challenging to discover and isolate these small molecules from cell supernatant. The work described herein showcases the development of a molecular probe that can covalently modify furan moieties via a [4 + 2] Diels-Alder cycloaddition, making them easily identifiable on liquid chromatography-mass spectrometry (LC-MS). The molecular probe, which undergoes this reaction with a variety of furans, was designed with both a UV-tag and a mass tag to enable easy identification. The probe has been tested with a variety of purified furans, including natural products, methylenomycin furan (MMF) hormones, and MMF derivatives. Moreover, the molecular probe has been tested in crude supernatants of various Streptomyces strains and enables identification of MMFs.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence.

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.