Efficacy and Mechanisms of Action of Essential Oils' Vapours against Blue Mould on Apples Caused by Penicillium expansum.

Biofumigation with slow-release diffusers of essential oils (EOs) of basil, oregano, savoury, thyme, lemon, and fennel was assessed for the control of blue mould of apples, caused by Penicillium expansum. In vitro, the ability of the six EOs to inhibit the mycelial growth was evaluated at concentrations of 1.0, 0.5, and 0.1%. EOs of thyme, savoury, and oregano, at all three concentrations, and basil, at 1.0 and 0.5%, were effective in inhibiting the mycelial growth of P. expansum. In vivo, disease incidence and severity were evaluated on 'Opal' apples artificially inoculated with the pathogen and treated at concentrations of 1.0% and 0.5% of EOs. The highest efficacy in reducing blue mould was observed with EOs of lemon and oregano at 1.0% after 60 days of storage at 1 ± 1 °C (incidence of rot, 3 and 1%, respectively) and after a further 14 days of shelf-life at 15 ± 1 °C (15 and 17%). Firmness, titratable acidity, and total soluble solids were evaluated at harvest, after cold storage, and after shelf-life. Throughout the storage period, no evident phytotoxic effects were observed. The EOs used were characterised through GC-MS to analyse their compositions. Moreover, the volatile organic compounds (VOCs) present in the cabinets were characterised during storage using the SPME-GC-MS technique. The antifungal effects of EOs were confirmed both in vitro and in vivo and the possible mechanisms of action were hypothesised. High concentrations of antimicrobial and antioxidant compounds in the EOs explain the efficacy of biofumigation in postharvest disease control. These findings provide new insights for the development of sustainable strategies for the management of postharvest diseases and the reduction of fruit losses during storage.

Aldehyde Accumulation in Aged Alcoholic Beer: Addressing Acetaldehyde Impacts on Upper Aerodigestive Tract Cancer Risks.

Aldehydes, particularly acetaldehyde, are carcinogenic molecules and their concentrations in foodstuffs should be controlled to avoid upper aerodigestive tract (UADT) and liver cancers. Highly reactive, acetaldehyde forms DNA and protein adducts, impairing physiological functions and leading to the development of pathological conditions. The consumption of aged beer, outside of the ethanol metabolism, exposes habitual drinkers to this carcinogen, whose concentrations can be over-increased due to post-brewing chemical and biochemical reactions. Storage-related changes are a challenge faced by the brewing industry, impacting volatile compound formation and triggering flavor instability. Aldehydes are among the volatile compounds formed during beer aging, recognized as off-flavor compounds. To track and understand aldehyde formation through multiple pathways during beer storage, consequent changes in flavor but particularly quality losses and harmful compound formation, this systematic review reunited data on volatile compound profiles through gas chromatography analyses from 2011 to 2021. Conditions to avoid flavor instability and successful methods for reducing beer staling, and consequent acetaldehyde accumulation, were raised by exploring the dynamic conversion between free and bound-state aldehydes. Future research should focus on implementing sensory analyses to investigate whether adding aldehyde-binding agents, e.g., cysteine and bisulfite, would contribute to consumer acceptance, restore beer flavor, and minimize acetaldehyde-related health damage.

Screening of antifungal activity of 12 essential oils against eight pathogenic fungi of vegetables and mushroom.

The antifungal properties of 12 Eos, that is, Syzygium aromaticum, Pelargonium graveolens, Lavandula angustifolia, Cupresus sempervirens, Mentha piperita, Santolina chamaecyparissus, Citrus sinensis, Pogostemon patchouli, Thymus mastichina, Thymus vulgaris, Eucalyptus globulus and Rosmarinus officinalis, were screened. The influence of five doses of each EOs was tested against Botrytis cinerea, Sclerotinia sclerotiorum, Fusarium oxysporum, Phytophthora parasitica, Pythium aphanidermatum, Alternaria brassicae, Cladobotryum mycophilum and Trichoderma aggressivum f.sp. europaeum using disc-diffusion method. The mycelial growth inhibition and ED50 were calculated. The chemical analysis of the EOs was analysed using gas chromatography-mass spectroscopy. A total of 58 compounds were identified in the 12 EOs. All essential oils (EOs) analysed showed antifungal activity against the test pathogens in the range of 5·32-100%. The inhibitory effect of oils showed dose-dependent activity on the tested fungus. Based on the ED50 values, clove, rose geranium, peppermint and patchouli were the most effective. This study warrants further research into the practical use of EOs for the control of important myco- and phytopathogens in intensive horticulture. SIGNIFICANCE AND IMPACT OF THE STUDY: Due to the serious damage caused by fungal pathogens of vegetables and mushrooms, it is necessary to search for integrated strategies of disease control. This study provides relevant information about the effects of 12 essential oils (EOs) against eight pathogens of agricultural interest, included mycopathogens with emphasis on the possible future application of the EOs as alternative antifungal agents.

Assessment of quality of commercial hand sanitizers using Fourier transform infrared spectroscopy and gas chromatography.

Since the beginning of the COVID-19 pandemic, the use and manufacture of alcohol-based hand sanitizers increased exponentially. Efficacy of hand sanitizers mainly depends on active ingredients like ethanol and isopropanol (IPA). Even though methanol is extremely hazardous to people, it is still illegally used in hand sanitizers in Bangladesh. Developing a quick and simple analytical method for detecting and quantifying ethanol/IPA/methanol is crucial. Here, Fourier transform infrared spectroscopy (FTIR) was used to identify and quantify alcohol content in commercially available hand sanitizers in a quick and easy way. Comparing the FTIR and GC data, provided quite similar results. Unlike previous studies by FTIR, C-H, CH3-C-CH3 stretching, and C-H bending vibrational modes were employed to construct analytical calibration curves to detect and quantify alcohol in hand sanitizers. According to FTIR and GC findings, ethanol and IPA content were found to be 43-82% and 40-69%, and 56-64% and 61-66%, respectively, whereas ethanol was labeled at 66-80% and IPA at 65-70%. FTIR and GC revealed methanol content ranging from 37 to 98 and 19 to 81%, respectively. Also, the FTIR was significantly faster than the GC. Therefore, FTIR can be used to commercially analyze the quality of hand sanitizers.•FTIR was used to identify and quantify alcohol content in commercially available hand sanitizers in a quick and easy way.•Comparing the FTIR and GC data, provided quite similar results.•Out of ten samples, five contained ethanol, three IPA, and two methanol.

Isolation and characterization of a Pichia anomala strain: a promising candidate for bioethanol production.

A yeast strain designated as Y-1 was isolated and characterized from wine yeast ("Jiuqu"). Based on the morphological and biochemical results, along with the rDNA internal transcribed spacer region (ITS), Y-1 was identified to be a Pichia anomala strain. Y-1 is an ethanol-tolerant strain, enduring ethanol concentrations of up to 14 %. Y-1 growth medium conditions were optimized, results showing good growth in medium with pH ranges from 3.5-6.5, temperature ranges from 25-30 °C, and inoculums range of 8 %-12 %, while optimum growth conditions were reached at a temperature of 30 °C, pH 5.0, and inoculums of 10 %. Furthermore, when the alkaline hydrolyzed Shatian pummelo peel solutions were inoculated with 10 % Y-1 and fermented at 30 °C for 6 d, 4.7 % pure ethanol (w/w) was produced, as evidenced by gas chromatography analysis. Our present study shows potential for the Y-1 strain to be a promising candidate for bioethanol production.

Analysis of Chemical Signatures of Alkaliphiles using Fatty Acid Methyl Ester Analysis.

BACKGROUND: Fatty acids occur in nearly all living organisms as the important predominant constituents of lipids. While all fatty acids have essentially the same chemical nature, they are an extremely diverse group of compounds. MATERIALS AND METHODS: To test the hypothesis, fatty acids of alkaliphiles isolates, Bacillus subtilis SVUNM4, Bacillus licheniformis SVUNM8, Bacillus methylotrohicus SVUNM9, and Paenibacillus dendritiformis SVUNM11, were characterized compared using gas chromatography-mass spectrometry (GC-MS) analysis. RESULTS: The content of investigated ten fatty acids, 1, 2-benzenedicarboxylic acid butyl 2-methylpropyl ester, phthalic acid, isobutyl 2-pentyl ester, dibutyl phthalate, cyclotrisiloxane, hexamethyl, cyclotetrasiloxane, octamethyl, dodecamethyl, heptasiloxane 1,1,3,3,5,5,7,7,9,9,11,11,13,13-etradecamethyl, 7,15-dihydroxydehydroabietic acid, methyl ester, di (trimethylsilyl) ether, hentriacontane, 2-thiopheneacetic acid, undec-2-enyl ester, obviously varied among four species, suggesting each species has its own fatty acid pattern. CONCLUSIONS: These findings demonstrated that GC-MS-based fatty acid profiling analysis provides the reliable platform to classify these four species, which is helpful for ensuring their biotechnological interest and novel chemotaxonomic.

Isolation and characterization of a Pichia anomala strain: a promising candidate for bioethanol production

A yeast strain designated as Y-1 was isolated and characterized from wine yeast ("Jiuqu"). Based on the morphological and biochemical results, along with the rDNA internal transcribed spacer region (ITS), Y-1 was identified to be a Pichia anomala strain. Y-1 is an ethanol-tolerant strain, enduring ethanol concentrations of up to 14 percent. Y-1 growth medium conditions were optimized, results showing good growth in medium with pH ranges from 3.5-6.5, temperature ranges from 25-30 °C, and inoculums range of 8 percent-12 percent, while optimum growth conditions were reached at a temperature of 30 °C, pH 5.0, and inoculums of 10 percent. Furthermore, when the alkaline hydrolyzed Shatian pummelo peel solutions were inoculated with 10 percent Y-1 and fermented at 30 °C for 6 d, 4.7 percent pure ethanol (w/w) was produced, as evidenced by gas chromatography analysis. Our present study shows potential for the Y-1 strain to be a promising candidate for bioethanol production.