Effects of physical training on hypothalamic neuronal activation and expressions of vasopressin and oxytocin in SHR after running until fatigue.

To assess the influence of physical training on neuronal activation and hypothalamic expression of vasopressin and oxytocin in spontaneously hypertensive rats (SHR), untrained and trained normotensive rats and SHR were submitted to running until fatigue while internal body and tail temperatures were recorded. Hypothalamic c-Fos expression was evaluated in thermoregulatory centers such as the median preoptic nucleus (MnPO), medial preoptic nucleus (mPOA), paraventricular nucleus of the hypothalamus (PVN), and supraoptic nucleus (SON). The PVN and the SON were also investigated for vasopressin and oxytocin expressions. Although exercise training improved the workload performed by the animals, it was reduced in SHR and followed by increased internal body temperature due to tail vasodilation deficit. Physical training enhanced c-Fos expression in the MnPO, mPOA, and PVN of both strains, and these responses were attenuated in SHR. Vasopressin immunoreactivity in the PVN was also increased by physical training to a lesser extent in SHR. The already-reduced oxytocin expression in the PVN of SHR was increased in response to physical training. Within the SON, neuronal activation and the expressions of vasopressin and oxytocin were reduced by hypertension and unaffected by physical training. The data indicate that physical training counterbalances in part the negative effect of hypertension on hypothalamic neuronal activation elicited by exercise, as well as on the expression of vasopressin and oxytocin. These hypertension features seem to negatively influence the workload performed by SHR due to the hyperthermia derived from the inability of physical training to improve heat dissipation through skin vasodilation.

Superspreading Surface with Hierarchical Porous Structure for Highly Efficient Vapor-Liquid Phase Change Heat Dissipation.

Superspreading surfaces with excellent water transport efficiency are highly desirable for addressing thermal failures through the liquid-vapor phase change of water in electronics thermal management applications. However, the trade-off between capillary pressure and viscous resistance in traditional superspreading surfaces with micro/ nanostructures poses a longstanding challenge in the development of superspreading surfaces with high cooling efficiency in confined spaces. Herein, a heat-treated hierarchical porous enhanced superspreading surface (HTHP) for highly efficient electronic cooling is proposed. Compared with the single porous structures in nanograss, nanosheets, and copper foam, HTHP with hierarchical honeycomb pores effectively resolves the trade-off effect by introducing large vertical through-pores to reduce viscous resistance, and connected small pores to provide sufficient capillary pressure synergistically. HTHP exhibits excellent capillary performance in both horizontal spreading and vertical rising. Despite a thickness of only 0.33 mm, the as-prepared ultrathin vapor chamber (UTVC) fabricated to exploit the superior capillary performance of HTHP achieved effective heat dissipation with outstanding thermal conductivity (12 121 Wm-1K-1), and low thermal resistance (0.1 KW-1) at a power of 5 W. This regulation strategy based on hierarchical honeycomb porous structures is expected to promote the development of high-performance superspreading surfaces with a wide range of applications in thermal management.

Soft and Damping Thermal Interface Materials with Honeycomb-Board-Mimetic Filler Network for Electronic Heat Dissipation.

High-power-density electronic devices under vibrations call for soft and damping thermal interface materials (TIMs) for efficient heat dissipation. However, integrating low hardness, high damping, and superior heat transfer capability into one TIM is highly challenging. Herein, soft, damping, and thermally conductive TIMs are designed and prepared by constructing a honeycomb-board-mimetic boron nitride nanosheet (BNNS) network in a dynamic polyimine via one-step horizontal centrifugal casting. The unique filler network makes the TIMs perform a high through-plane thermal conductivity (> 7.69 W m-1 K-1) and a uniform heat transfer process. Meanwhile, the hierarchical dynamic bonding of the polyimine endows the TIMs with low compressive strength (2.16 MPa at 20% strain) and excellent damping performance (tan δ > ≈0.3 at 10-2-102 Hz). The resulting TIMs also exhibit electrical insulation and remarkable recycling ability. Compared with the commercial ones, the TIMs provide better heat dissipation (4.1 °C) for a high-power 5G base station and less temperature fluctuation (1.8 °C) for an automotive insulated gate bipolar transistor (IGBT) under vibrations. This rational design offers a viable approach to prepare soft and damping TIMs for effective heat dissipation of high-power-density electronic devices under vibrations.

High Thermal Stability and Low Thermal Resistance of Large Area GaN/3C-SiC/Diamond Junctions for Practical Device Processes.

Thermal management is critical in contemporary electronic systems, and integrating diamond with semiconductors offers the most promising solution to improve heat dissipation. However, developing a technique that can fully exploit the high thermal conductivity of diamond, withstand high-temperature annealing processes, and enable mass production is a significant challenge. In this study, the successful transfer of AlGaN/GaN/3C-SiC layers grown on Si to a large-size diamond substrate is demonstrated, followed by the fabrication of GaN high electron mobility transistors (HEMTs) on the diamond. Notably, no exfoliation of 3C-SiC/diamond bonding interfaces is observed even after annealing at 1100 °C, which is essential for high-quality GaN crystal growth on the diamond. The thermal boundary conductance of the 3C-SiC-diamond interface reaches ≈55 MW m-2 K-1, which is efficient for device cooling. GaN HEMTs fabricated on the diamond substrate exhibit the highest maximum drain current and the lowest surface temperature compared to those on Si and SiC substrates. Furthermore, the device thermal resistance of GaN HEMTs on the diamond substrate is significantly reduced compared to those on SiC substrates. These results indicate that the GaN/3C-SiC on diamond technique has the potential to revolutionize the development of power and radio-frequency electronics with improved thermal management capabilities.

Limits to sustained energy intake. XXXIV. Can the heat dissipation limit (HDL) theory explain reproductive aging?

According to the heat dissipation limit (HDL) theory, reproductive performance is limited by the capacity to dissipate excess heat. We tested the novel hypotheses that (1) the age-related decline in reproductive performance is due to an age-related decrease of heat dissipation capacity and (2) the limiting mechanism is more severe in animals with high metabolic rates. We used bank voles (Myodes glareolus) from lines selected for high swim-induced aerobic metabolic rate, which have also increased basal metabolic rate, and unselected control lines. Adult females from three age classes - young (4 months), middle-aged (9 months) and old (16 months) - were maintained at room temperature (20°C), and half of the lactating females were shaved to increase heat dissipation capacity. Old females from both selection lines had a decreased litter size, mass and growth rate. The peak-lactation average daily metabolic rate was higher in shaved than in unshaved mothers, and this difference was more profound among old than young and middle-aged voles (P=0.02). In females with large litters, milk production tended to be higher in shaved (least squares mean, LSM±s.e.: 73.0±4.74 kJ day-1) than in unshaved voles (61.8±4.78 kJ day-1; P=0.05), but there was no significan"t effect of fur removal on the growth rate [4.47±2.29 g (4 days-1); P=0.45]. The results provide mixed support of the HDL theory and no support for the hypotheses linking the differences in reproductive aging with either a deterioration in thermoregulatory capability or genetically based differences in metabolic rate.

Modulation of Photosystem II Function in Celery via Foliar-Applied Salicylic Acid during Gradual Water Deficit Stress.

Water deficit is the major stress factor magnified by climate change that causes the most reductions in plant productivity. Knowledge of photosystem II (PSII) response mechanisms underlying crop vulnerability to drought is critical to better understanding the consequences of climate change on crop plants. Salicylic acid (SA) application under drought stress may stimulate PSII function, although the exact mechanism remains essentially unclear. To reveal the PSII response mechanism of celery plants sprayed with water (WA) or SA, we employed chlorophyll fluorescence imaging analysis at 48 h, 96 h, and 192 h after watering. The results showed that up to 96 h after watering, the stroma lamellae of SA-sprayed leaves appeared dilated, and the efficiency of PSII declined, compared to WA-sprayed plants, which displayed a better PSII function. However, 192 h after watering, the stroma lamellae of SA-sprayed leaves was restored, while SA boosted chlorophyll synthesis, and by ameliorating the osmotic potential of celery plants, it resulted in higher relative leaf water content compared to WA-sprayed plants. SA, by acting as an antioxidant under drought stress, suppressed phototoxicity, thereby offering PSII photoprotection, together with enhanced effective quantum yield of PSII photochemistry (ΦPSII) and decreased quantity of singlet oxygen (1O2) generation compared to WA-sprayed plants. The PSII photoprotection mechanism induced by SA under drought stress was triggered by non-photochemical quenching (NPQ), which is a strategy to protect the chloroplast from photo-oxidative damage by dissipating the excess light energy as heat. This photoprotective mechanism, triggered by NPQ under drought stress, was adequate in keeping, especially in high-light conditions, an equal fraction of open PSII reaction centers (qp) as of non-stress conditions. Thus, under water deficit stress, SA activates a regulatory network of stress and light energy partitioning signaling that can mitigate, to an extent, the water deficit stress on PSII functioning.

Mechanistic Insights on Salicylic Acid-Induced Enhancement of Photosystem II Function in Basil Plants under Non-Stress or Mild Drought Stress.

Photosystem II (PSII) functions were investigated in basil (Ocimum basilicum L.) plants sprayed with 1 mM salicylic acid (SA) under non-stress (NS) or mild drought-stress (MiDS) conditions. Under MiDS, SA-sprayed leaves retained significantly higher (+36%) chlorophyll content compared to NS, SA-sprayed leaves. PSII efficiency in SA-sprayed leaves under NS conditions, evaluated at both low light (LL, 200 µmol photons m-2 s-1) and high light (HL, 900 µmol photons m-2 s-1), increased significantly with a parallel significant decrease in the excitation pressure at PSII (1-qL) and the excess excitation energy (EXC). This enhancement of PSII efficiency under NS conditions was induced by the mechanism of non-photochemical quenching (NPQ) that reduced singlet oxygen (1O2) production, as indicated by the reduced quantum yield of non-regulated energy loss in PSII (ΦNO). Under MiDS, the thylakoid structure of water-sprayed leaves appeared slightly dilated, and the efficiency of PSII declined, compared to NS conditions. In contrast, the thylakoid structure of SA-sprayed leaves did not change under MiDS, while PSII functionality was retained, similar to NS plants at HL. This was due to the photoprotective heat dissipation by NPQ, which was sufficient to retain the same percentage of open PSII reaction centers (qp), as in NS conditions and HL. We suggest that the redox status of the plastoquinone pool (qp) under MiDS and HL initiated the acclimation response to MiDS in SA-sprayed leaves, which retained the same electron transport rate (ETR) with control plants. Foliar spray of SA could be considered as a method to improve PSII efficiency in basil plants under NS conditions, at both LL and HL, while under MiDS and HL conditions, basil plants could retain PSII efficiency similar to control plants.

Thermally Managed, Injectable Optoelectronic Probe with Heat Dissipation Guide for Photodynamic Therapy.

The development of fabrication technologies and appearance of new materials has resulted in dramatic increase in the performance of electronic devices, while the overall size has decreased. Recent electronic devices made of micro/nano-size components show high efficiency and outstanding performance with compact size, but these devices have revealed several fatal problems. In particular, the isolated heat that is generated by numerous components concentrated in a limited small area at high density, such as bio-integrated devices, is an issue that needs to be urgently addressed, because it is closely related to the performance and lifetime of electronic devices. To solve these problems, the microscale light emitting diode (µLED)-based neural probe is introduced on an injectable heat dissipation guide. The heat dissipation guide is made of boron nitride (BN) nanomaterials with high thermal conductivity. The heat management noticeably improves the optical output performance of the µLEDs, in which BN effectively dissipates heat, and allows enhanced lighting from the LEDs to be transmitted through brain tissue without thermal damage. Moreover, it shows remarkable improvement in the therapeutic effect of photodynamic therapy of mouse cancer cells.

Evaporative cooling via panting and its metabolic and water balance costs for lizards in the American Southwest.

In lizards there is considerable variation in the ability to dissipate environmental/endogenous heat loads through evaporative cooling via panting, which effects how long lizards can spend exposed to high solar heat loads. We recently described the differing capacities of lizards to depress body temperature (Tb) through evaporative cooling via panting. Here, we link panting and Tb depression with rates of evaporative water loss and its metabolic costs under high heat loads. We used flow-through respirometry to measure evaporative water loss rates and metabolism of 17 lizard species from the American Southwest while simultaneously measuring Tb. We exposed lizards to air temperatures (Ta) ranging from 35°C to their critical thermal maximum (CTmax) while marking the onset of panting. We then estimated pre-panting Q10 values for metabolism to partition increases in metabolism associated with the van't Hoff effect from the mechanical cost of panting with increasing heat loads. We found that evaporative cooling costs substantially varied among species, with panting effort significantly affecting lizards' evaporative capacity. Lizard evaporation rates ranged from 0.32 to 1.5 g H2O h-1, with individuals losing as much as 6% h-1 of body mass while panting. Lizards also experienced an increase of up to 7.9-fold in metabolic rate while panting, although the overall energetic costs of panting remained relatively low compared with evaporative water costs. Across species, there was a significant positive relationship between the overall rate of evaporative heat loss and the maximum Ta-Tb gradient a species could maintain. While evaporative cooling may be an effective mechanism for reducing Tb and extending activity in hot environments for many species, it has significant metabolic and water balance costs that should be considered, as habitats with high environmental heat loads can be especially costly to an animal's water budgets.

Limits to sustained energy intake. XXXIII. Thyroid hormones play important roles in milk production but do not define the heat dissipation limit in Swiss mice.

The limits to sustained energy intake set physiological upper boundaries that affect many aspects of human and animal performance. The mechanisms underlying these limits, however, remain unclear. We exposed Swiss mice to either supplementary thyroid hormones (THs) or the inhibitor methimazole during lactation at 21 or 32.5°C, and measured food intake, resting metabolic rate (RMR), milk energy output (MEO), serum THs and mammary gland gene expression of females, and litter size and mass of their offspring. Lactating females developed hyperthyroidism following exposure to supplementary THs at 21°C, but they did not significantly change body temperature, asymptotic food intake, RMR or MEO, and litter and mass were unaffected. Hypothyroidism, induced by either methimazole or 32.5°C exposure, significantly decreased asymptotic food intake, RMR and MEO, resulting in significantly decreased litter size and litter mass. Furthermore, gene expression of key genes in the mammary gland was significantly decreased by either methimazole or heat exposure, including gene expression of THs and prolactin receptors, and Stat5a and Stat5b. This suggests that endogenous THs are necessary to maintain sustained energy intake and MEO. Suppression of the thyroid axis seems to be an essential aspect of the mechanism by which mice at 32.5°C reduce their lactation performance to avoid overheating. However, THs do not define the upper limit to sustained energy intake and MEO at peak lactation at 21°C. Another, as yet unknown, factor prevents supplementary thyroxine exerting any stimulatory metabolic impacts on lactating mice at 21°C.

Small increases in ambient temperature reduce offspring body mass in an equatorial mammal.

Human-induced climate change is leading to temperature rises, along with increases in the frequency and intensity of heatwaves. Many animals respond to high temperatures through behavioural thermoregulation, for example by resting in the shade, but this may impose opportunity costs by reducing foraging time (therefore energy supply), and so may be most effective when food is abundant. However, the heat dissipation limit (HDL) theory proposes that even when energy supply is plentiful, high temperatures can still have negative effects. This is because dissipating excess heat becomes harder, which limits processes that generate heat such as lactation. We tested predictions from HDL on a wild, equatorial population of banded mongooses (Mungos mungo). In support of the HDL theory, higher ambient temperatures led to lighter pups, and increasing food availability made little difference to pup weight under hotter conditions. This suggests that direct physiological constraints rather than opportunity costs of behavioural thermoregulation explain the negative impact of high temperatures on pup growth. Our results indicate that climate change may be particularly important for equatorial species, which often experience high temperatures year-round so cannot time reproduction to coincide with cooler conditions.

Mild air oxidation of boron nitride nanotubes. Application as nanofillers for thermally conductive polycarbonate nanocomposites.

Boron nitride nanotubes (BNNTs) have experienced considerable growth in recent years due to their unique intrinsic properties, in particular for the fabrication of polymer nanocomposites. Dispersion of pure BNNTs in nanocomposites is often difficult due to their poor compatibility with most polymer matrices. An approach involving the creation of hydroxyl groups on their surface could improve their dispersion. While some harsh oxidation processes have been reported so far, a mild oxidation of BNNTs using air as the oxidant is reported here. This new catalytic reaction leads to slightly oxidized BNNTs, which were characterized by scanning electron microscope, x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. Polycarbonate nanocomposites were then fabricated using pristine and oxidized BNNTs as nanofillers. The measured thermal conductivity increased linearly with the mildly oxidized BNNTs content. It reached a five-fold increase up to 1.19 W m.K-1at 15% vol. content which is significantly improved over nanocomposites fabricated with severely oxidized BNNTs, while the electrically insulating character remained unchanged.

Enhanced thermal properties of epoxy composites by constructing thermal conduction networks with low content of three-dimensional graphene.

Micro/nano electronic devices heat dissipation depends heavily on the thermal interface materials (TIMs). Despite notable progress, it is hard to efficaciously enhance the thermal properties of the hybrid TIMs with high-load additives due to an absence of effective heat transfer routes. Herein, the low content of three-dimensional (3D) graphene with interconnected networks is adopted as the additive to improve the thermal properties of epoxy composite TIMs. The thermal diffusivity and thermal conductivity of the as-prepared hybrids were dramatically improved by constructing thermal conduction networks after adding 3D graphene as fillers. The 3D graphene/epoxy hybrid's optimal thermal characteristics were observed at 1.5 wt% of 3D graphene content, corresponding to a maximum enhancement of 683%. Besides, heat transfer experiments were further performed to determine the superb heat dissipation potential of the 3D graphene/epoxy hybrids. Moreover, the 3D graphene/epoxy composite TIM was also applied to high-power LED to improve heat dissipation. It effectively reduced the maximum temperature from 79.8 °C to 74.3 °C. These results are beneficial for the better cooling performance of electronic devices and provide useful guidelines for advancing the next-generation TIMs.

Maximum limit of sensible heat dissipation in Japanese quail.

Surface temperature can be used as a tool for calculating sensible heat transfer. However, it needs to be associated with air temperature to identify the direction of heat flow (gain or loss). This study quantified sensible heat transfer in Japanese quail as a function of operative temperature. The meteorological variables were air temperature, relative humidity, and black globe temperature. Quail surface temperature was measured on 50 adult Coturnix coturnix japonica individuals 270 days old during 8 days by using a thermographic camera. The data were analyzed by the least-squares method to assess the effects of sex (male and female), period of the day (morning and afternoon), and body region (head, body, and feet). Quail surface temperature was strongly correlated with operative temperature. The total sensible heat flow was 64.02 W m-2. The morning period had a mean operative temperature of 22.48 °C, providing a higher gradient between air and quail temperature and thereby producing a higher heat flow (82.19 W m-2). In the afternoon, the heat transfer was lower (45.70 W m-2) because the operative temperature was higher (30.84 °C). Comparison between sexes showed that heat transfer was higher in females (67.37 W m-2) than in males (60.53 W m-2). The head served as an important thermal window, with a heat transfer of 78.24 W m-2, whereas the body and feet had a transfer of 56.80 W m-2. Heat transfer by sensible mechanisms was quantified in Japanese quail. Heat transfer depended greatly on ambient temperature. When the operative temperature was below 28 °C, sensible mechanisms were efficient in dissipating heat to the environment. When the ambient temperature exceeded 29 °C, quail could not effectively dissipate heat to the environment through sensible mechanisms. At 30 °C and above, heat loss shifted to heat gain, causing thermal stress in Japanese quail.

Integration of Janus Wettability and Heat Conduction in Hierarchically Designed Textiles for All-Day Personal Radiative Cooling.

Personal cooling textiles are a promising energy-free pathway for confronting serious heat-related public health threats and improving industrial worker productivity. Current cooling strategies mainly focus on passive daytime radiation, and there is a lack of research on all-day cooling methods which utilize synergistic radiative, conductive, and evaporative heat dissipation. Herein, we demonstrate a hierarchical polyurethane/silicon nitride fibrous membrane with Janus wettability fabricated via a scalable electrospinning method followed by single-side hydrophilic plasma treatment. High angular-dependent solar reflectance (91%) and human body infrared emittance (93%) allow for a temperature drop of ∼21.9 °C under direct sunlight and ∼2.8 °C at night compared with traditional cotton. The innovative integration of Janus wettability and heat conduction in hierarchically designed textiles ensures a minimum sweat consumption of 0.5 mL h-1, avoiding harmfully excessive perspiration. The excellent all-day cooling performance of this hierarchical textile presents great advantages for smart textile, energy-saving, and personal cooling applications.

Novel Insights into the Contribution of Cyclic Electron Flow to Cotton Bracts in Response to High Light.

Cyclic electron flow around photosystem I (CEF-PSI) is shown to be an important protective mechanism to photosynthesis in cotton leaves. However, it is still unclear how CEF-PSI is regulated in non-foliar green photosynthetic tissues such as bracts. In order to learn more about the regulatory function of photoprotection in bracts, we investigated the CEF-PSI attributes in Yunnan 1 cotton genotypes (Gossypium bar-badense L.) between leaves and bracts. Our findings demonstrated that cotton bracts possessed PROTON GRADIENT REGULATION5 (PGR5)-mediated and the choroplastic NAD(P)H dehydrogenase (NDH)-mediated CEF-PSI by the same mechanism as leaves, albeit at a lower rate than in leaves. The ATP synthase activity of bracts was also lower, while the proton gradient across thylakoid membrane (ΔpH), rate of synthesis of zeaxanthin, and heat dissipation were higher than those of the leaves. These results imply that cotton leaves under high light conditions primarily depend on CEF to activate ATP synthase and optimize ATP/NADPH. In contrast, bracts mainly protect photosynthesis by establishing a ΔpH through CEF to stimulate the heat dissipation process.

Dissipation during the Gating Cycle of the Bacterial Mechanosensitive Ion Channel Approaches the Landauer Limit.

The Landauer principle sets a thermodynamic bound of kBT ln 2 on the energetic cost of erasing each bit of information. It holds for any memory device, regardless of its physical implementation. It was recently shown that carefully built artificial devices can attain this bound. In contrast, biological computation-like processes, e.g., DNA replication, transcription and translation use an order of magnitude more than their Landauer minimum. Here, we show that reaching the Landauer bound is nevertheless possible with biological devices. This is achieved using a mechanosensitive channel of small conductance (MscS) from E. coli as a memory bit. MscS is a fast-acting osmolyte release valve adjusting turgor pressure inside the cell. Our patch-clamp experiments and data analysis demonstrate that under a slow switching regime, the heat dissipation in the course of tension-driven gating transitions in MscS closely approaches its Landauer limit. We discuss the biological implications of this physical trait.

Dynamic Heat Dissipation Model of Distributed Parameters for Oil-Directed and Air-Forced Traction Transformers and Its Experimental Validation.

A traction transformer with narrow oil channels is usually cooled with the ODAF or "Oil Directed Air Forced" method, where its temperature greatly depends on the Joule heat of windings, the conjugate heat transfer in the transformer, and the secondary heat release via oil cooler, together with the oil flowrate generated by oil pump. Neither the thermal-electric analogy nor the CFD simulation approach is qualified to predict the temporal and spatial temperature variations in this type of transformer. In the current work, the distributed parameter models are built for traction transformers and oil coolers with the assumption of a one-dimensional temperature field in the oil flow direction, respectively. Then, the two models are combined with the lumped parameter ones of oil pumps and pipes via the flow rate, temperature and pressure continuities at their interfaces, resulting in the derivation of the dynamic heat dissipation model of oil-directed and air-forced traction transformers. Additionally, an efficient algorithm is proposed for its numerical solution, and the temperature rise experiment is performed for model validation. Finally, the fundamental of dynamic heat dissipation in traction transformers is investigated with the current numerical model and the effects of ambient temperature are studied.

Does aging alter skin vascular function in humans when spatial variation is considered?

OBJECTIVE: Reports evaluating age-related impairments in cutaneous vascular function assessed by either the venoarteriolar reflex (VAR) induced by venous congestion, or post-occlusive reactive hyperemia (PORH) activated by arterial occlusion, have yielded mixed findings. This may be due to region-specific variability that occurs when assessing local cutaneous vascular responses. We evaluated the hypothesis that aging attenuates VAR and PORH responses in forearm skin assessed across four adjacent sites, each separated by ~4 cm to account for inter-site variability. METHODS: In twenty young (24 ± 4 years, 10 females) and twenty older (60 ± 7 years, 9 females) adults, VAR and PORH were achieved by a 3-min venous occlusion and 5-min arterial occlusion, each induced by inflating a pressure cuff to 45 and 240 mmHg, respectively. Cutaneous blood flow at all skin sites was measured by laser-Doppler flowmetry with the average response from all sites used for between-group comparisons. RESULTS: VAR and PORH responses were similar between groups with the exception that the time required to achieve peak PORH was delayed in older adults (mean difference of 5.5 ± 4.4 s, p = 0.003, Cohen's d = 0.812). CONCLUSIONS: We showed that aging had a negligible influence on VAR and PORH responses in forearm skin even when controlling for region-specific variability.

Warming in the land of the midnight sun: breeding birds may suffer greater heat stress at high- versus low-Arctic sites.

Rising global temperatures are expected to increase reproductive costs for wildlife as greater thermoregulatory demands interfere with reproductive activities. However, predicting the temperatures at which reproductive performance is negatively impacted remains a significant hurdle. Using a thermoregulatory polygon approach, we derived a reproductive threshold temperature for an Arctic songbird-the snow bunting (Plectrophenax nivalis). We defined this threshold as the temperature at which individuals must reduce activity to suboptimal levels (i.e. less than four-time basal metabolic rate) to sustain nestling provisioning and avoid overheating. We then compared this threshold to operative temperatures recorded at high (82° N) and low (64° N) Arctic sites to estimate how heat constraints translate into site-specific impacts on sustained activity level. We predict buntings would become behaviourally constrained at operative temperatures above 11.7°C, whereupon they must reduce provisioning rates to avoid overheating. Low-Arctic sites had larger fluctuations in solar radiation, consistently producing daily periods when operative temperatures exceeded 11.7°C. However, high-latitude birds faced entire, consecutive days when parents would be unable to sustain required provisioning rates. These data indicate that Arctic warming is probably already disrupting the breeding performance of cold-specialist birds and suggests counterintuitive and severe negative impacts of warming at higher latitude breeding locations.