Improvement of Perovskite Solar Cells Efficiency by Management of the Electron Withdrawing Groups in Hole Transport Materials: Theoretical Calculation and Experimental Verification.

Management of functional groups in hole transporting materials (HTMs) is a feasible strategy to improve perovskite solar cells (PSCs) efficiency. Therefore, starting from the carbazole-diphenylamine-based JY7 molecule, JY8 and JY9 molecules are incorporated into the different electron-withdrawing groups of fluorine and cyano groups on the side chains. The theoretical results reveal that the introduction of electron-withdrawing groups of JY8 and JY9 can improve these highest occupied molecular orbital (HOMO) energy levels, intermolecular stacking arrangements, and stronger interface adsorption on the perovskite. Especially, the results of molecular dynamics (MD) indicate that the fluorinated JY8 molecule can yield a preferred surface orientation, which exhibits stronger interface adsorption on the perovskite. To validate the computational model, the JY7-JY9 are synthesized and assembled into PSC devices. Experimental results confirm that the HTMs of JY8 exhibit outstanding performance, such as high hole mobility, low defect density, and efficient hole extraction. Consequently, the PSC devices based on JY8 achieve a higher PCE than those of JY7 and JY9. This work highlights the management of the electron-withdrawing groups in HTMs to realize the goal of designing HTMs for the improvement of PSC efficiency.

The Renaissance of Poly(3-hexylthiophene) as a Promising Hole-Transporting Material Toward Efficient and Stable Perovskite Solar Cells.

To push the commercialization of the promising photovoltaic technique of perovskite solar cells (PSCs), the three-element golden law of efficiency, stability, and cost should be followed. As the key component of PSCs, hole-transporting materials (HTMs) involving widely-used organic semiconductors such as 2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD) or poly(triarylamine) (PTAA) usually suffer high-cost preparation and low operational stability. Fortunately, the studies on the classical p-type polymer poly(3-hexylthiophene) (P3HT) as an alternative HTM have recently sparked a broad interest due to its low-cost synthesis, excellent batch-to-batch purity, superior hole conductivity as well as controllable and stable film morphology. Despite this, the device efficiency still lags behind P3HT-based PSCs mainly owing to the mismatched energy level and poor interfacial contact between P3HT and the perovskite layer. Hence, in this review, the study timely summarizes the developed strategies for overcoming the corresponding issues such as interface engineering, morphology regulation, and formation of composite HTMs from which some critical clues can be extracted to provide guidance for further boosting the efficiency and stability of P3HT-based devices. Finally, in the outlook, the future research directions either from the viewpoint of material design or device engineering are outlined.

Thiocarbonyl-Based Hole Transport Materials with Enhanced Defect Passivation Ability for Efficient and Stable Perovskite Solar Cells.

Organic hole transporting materials (HTMs) are extensively studied in perovskite solar cells (PSCs). The HTMs directly contact the underlying perovskite material, and they play additional roles apart from hole transporting. Developing organic HTMs with defect passivation function has been proved to be an efficient strategy to construct efficient and stable PSCs. In this work, new organic molecules with thiocarbonyl (C═S) and carbonyl (C═O) functional groups are synthesized and applied as HTMs (named FN-S and FN-O). FN-S with C═S can be facilely obtained from FN-O containing C═O. Notably, the C═S in FN-S results in superior defect passivation ability compared to FN-O. Moreover, FN-S exhibits excellent hole extraction/transport capability. Conventional PSCs using FN-S as HTM show an impressive power conversion efficiency (PCE) of 23.25%, with excellent long-term stability and operational stability. This work indicates that simply converting C═O to C═S is an efficient way to improve the device performance by strengthening the defect passivation functionality.

Complex Metal Oxides as Emerging Inorganic Hole-Transporting Materials for Perovskite Solar Cells.

Perovskite solar cells (PSCs) have achieved revolutionary progress during the past decades with a rapidly boosting rate in power conversion efficiencies from 3.8% to 26.1%. However, high-efficiency PSCs with organic hole-transporting materials (HTMs) suffer from inferior long-term stability and high costs. The replacement of organic HTMs with inorganic counterparts such as metal oxides can solve the above-mentioned problems to realize highly robust and cost-effective PSCs. Nevertheless, the widely used simple metal oxide-based HTMs are limited by the low conductivity and poor light transmittance due to the fixed atomic environment. As an emerging family of inorganic HTMs, complex metal oxides with superior structural/compositional flexibility have attracted rapidly increasing interest recently, showing superior carrier conductivity/mobility and superb light transmittance. Herein, the recent advancements in the design and development of complex metal oxide-based HTMs for high-performance PSCs are summarized by emphasizing the superiority of complex metal oxides as HTMs over simple metal oxide-based counterparts. Consequently, several distinct strategies for the design of complex metal oxide-based HTMs are proposed. Last, the future directions and remaining challenges of inorganic complex metal oxide-based HTMs for PSCs are also presented. This review aims to provide valuable guidelines for the further advancements of robust, high-efficiency, and low-cost PSCs.

Self-Assembled Molecules with Asymmetric Backbone for Highly Stable Binary Organic Solar Cells with 19.7 % Efficiency.

The hole-transporting material (HTM), poly (3,4-ethylene dioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), is the most widely used material in the realization of high-efficiency organic solar cells (OSCs). However, the stability of PEDOT : PSS-based OSCs is quite poor, arising from its strong acidity and hygroscopicity. In addition, PEDOT : PSS has an absorption in the infrared region and high highest occupied molecular orbital (HOMO) energy level, thus limiting the enhancement of short-circuit current density (Jsc) and open-circuit voltage (Voc), respectively. Herein, two asymmetric self-assembled molecules (SAMs), namely BrCz and BrBACz, were designed and synthesized as HTM in binary OSCs based on the well-known system of PM6 : Y6, PM6 : eC9, PM6 : L8-BO, and D18 : eC9. Compared with BrCz, BrBACz shows larger dipole moment, deeper work function and lower surface energy. Moreover, BrBACz not only enhances photon harvesting in the active layer, but also minimizes voltage losses as well as improves interface charge extraction/ transport. Consequently, the PM6 : eC9-based binary OSC using BrBACz as HTM exhibits a champion efficiency of 19.70 % with a remarkable Jsc of 29.20 mA cm-2 and a Voc of 0.856 V, which is a record efficiency for binary OSCs so far. In addition, the unencapsulated device maintains 95.0 % of its original efficiency after 1,000 hours of storage at air ambient, indicating excellent long-term stability.

Nexuses Between the Chemical Design and Performance of Small Molecule Dopant-Free Hole Transporting Materials in Perovskite Solar Cells.

Perovskite solar cells (PSCs) have grabbed much attention of researchers owing to their quick rise in power conversion efficiency (PCE). However, long-term stability remains a hurdle in commercialization, partly due to the inclusion of necessary hygroscopic dopants in hole transporting materials, enhancing the complexity and total cost. Generally, the efforts in designing dopant-free hole transporting materials (HTMs) are devoted toward small molecule and polymeric HTMs, where small molecule based HTMs (SM-HTMs) are dominant due to their reproducibility, facile synthesis, and low cost. Still, the state-of-art dopant-free SM-HTM has not been achieved yet, mainly because of the knowledge gap between device engineering and molecular designs. From a molecular engineering perspective, this article reviews dopant-free SM-HTMs for PSCs, outlining analyses of chemical structures with promising properties toward achieving effective, low-cost, and scalable materials for devices with higher stability. Finally, an outlook of dopant-free SM-HTMs toward commercial application and insight into the development of long-term stability PSCs devices is provided.

Recent Progress of Helicene Type Hole-Transporting Materials for Perovskite Solar Cells.

Perovskite solar cells have emerged as one of the most promising photovoltaic technologies for future clean energy sources to replace fossil fuels. Among the various components in a perovskite solar cell, the hole-transporting materials play significant roles in boosting device performance and stability. Recently, hole-transporting materials with helicene cores have received much attention due to their unique properties and ability to improve the performance and stability of the perovskite solar cells. The focus of this review is on the emerging special class of HTMs based on helicenes for perovskite solar cells. The optical, electrochemical, thermal and photovoltaic properties of helicene-based small molecules as HTMs or interfacial layer materials in n-i-p or p-i-n type perovskite solar cells are summarized. Finally, perspectives for the future development of helicene type hole-transporting materials are provided.

Synthesis, Properties, and Application of Small-Molecule Hole-Transporting Materials Based on Acetylene-Linked Thiophene Core.

Three small molecule organic compounds based on conjugated acetylene-linked methoxy triphenylamine terminal groups with different substituted thiophene cores were synthesized and firstly applied as hole-transporting materials (HTMs). The electron-deficient acetylene linkers can tune the energy levels of frontier molecular orbitals. The physical property measurements show that the HTMs (CJ-05, CJ-06, and CJ-07) possess good stability, hydrophobicity, and film-forming ability. Further, the HTMs were applied in the MAPbI3-based perovskite solar cells (PSCs), and the best power conversion efficiency (PCE) of 6.04%, 6.77%, and 6.48% was achieved, respectively, which implies that they exhibit great potential in photovoltaic applications.

Benzothieno[3,2-b]thiophene-Based Noncovalent Conformational Lock Achieves Perovskite Solar Cells with Efficiency over 24.

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole-transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs-based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2-b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm2 , respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I- ion migration, thus, leading to enhanced device stability. The success in neighboring-group engineering can triggered a strong interest in developing thienoacene-based OSNCs toward efficient and stable PSCs.

Tailored Polymeric Hole-Transporting Materials Inducing High-Quality Crystallization of Perovskite for Efficient Inverted Photovoltaic Devices.

For achieving high-performance p-i-n perovskite solar cells (PSCs), hole transporting materials (HTMs) are critical to device functionality and represent a major bottleneck to further enhancing device stability and efficiency in the inverted devices. Three dopant-free polymeric HTMs are developed based on different linkage sites of triphenylamine and phenylenevinylene repeating units in their main backbone structures. The backbone curvatures of the polymeric HTMs affect the morphology and hole mobility of the polymers and further change the crystallinity of perovskite films. By using PTA-mPV with moderate molecular curvature, p-i-n PSCs with high efficiency of 19.5% and long-term stability can be achieved. The better performance is attributed to the more effective hole extraction ability, higher charge-carrier mobility, and lower interfacial charge recombination. Furthermore, these three polymeric HTMs are synthesized without any noble metal catalyst, and show great advantages in future application owing to the low-cost.

Hole/Electron Transporting Materials for Nonfullerene Organic Solar Cells.

Nonfullerene acceptor based organic solar cells (NF-OSCs) have witnessed rapid progress over the past few years owing to the intensive research efforts on novel electron donor and nonfullerene acceptor (NFA) materials, interfacial engineering, and device processing techniques. Interfacial layers including electron transporting layers (ETL) and hole transporting layers (HTLs) are crucially important in the OSCs for facilitating electron and hole extraction from the photoactive blend to the respective electrodes. In this review, the lates progress in both ETLs and HTLs for the currently prevailing NF-OSCs are discussed, in which the ETLs are summarized from the categories of metal oxides, metal chelates, non-conjugated electrolytes and conjugated electrolytes, and the HTLs are summarized from the categories of inorganic and organic materials. In addition, some bifunctional interlayer materials served as both ETLs and HTLs are also introduced. Finally, the prospects of ETL/HTL materials for NF-OSCs are provided.

Thermally Stable D2h Symmetric Donor-π-Donor Porphyrins as Hole-Transporting Materials for Perovskite Solar Cells.

A series of new D2h symmetric porphyrins (MDA4, MTA4, and MDA8) with donor-π-donor structures have been synthesized as the hole-transporting materials for perovskite solar cells (PSCs). The novel porphyrin molecules feature a D2h symmetrically substituted ZnII porphyrin core and two kinds of donor systems (diarylamine (DAA) and triarylamine (TAA)), which can regulate energy level, increase thermal stability, solubility, and hydrophobicity via long alkoxyl chains. PSC devices based on MDA4 as the HTM showed impressive power-conversion efficiency (PCE) of 22.67 % under AM1.5G solar illumination. Notably, the device was sent for certification, and a PCE of 22.19 % was reported, representing the highest PCE from porphyrin-based HTMs. Furthermore, the MDA4-based PSCs showed excellent thermal stability under 60 °C and RH 60 % and preserved 88 % of initial performance after 360 hours. The strategy opens a new avenue for developing efficient and stable porphyrin HTMs for PSCs.

Triarylamine/Bithiophene Copolymer with Enhanced Quinoidal Character as Hole-Transporting Material for Perovskite Solar Cells.

Polytriarylamine is a popular hole-transporting materials (HTMs) despite its suboptimal conductivity and significant recombination at the interface in a solar cell setup. Having noted insufficient conjugation among the triarylamine units along the polymer backbone, we inserted a bithiophene unit between two triarylamine units through iron-catalyzed C-H/C-H coupling of a triarylamine/thiophene monomer so that two units conjugate effectively via four quinoidal rings when the molecule functions as HTM. The obtained triarylamine/bithiophene copolymer (TABT) used as HTM showed a high-performance in methylammonium lead iodide perovskite (MAPbI3 ) solar cells. Mesityl substituted TABT forms a uniform film, shows high hole-carrier mobility, and has an ionization potential (IP=5.40 eV) matching that of MAPbI3 . We fabricated a solar cell device with a power conversion efficiency of 21.3 % and an open-circuit voltage of 1.15 V, which exceeds the performance of devices using reference standard such as poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA) and Spiro-OMeTAD.

Dibenzodiazapyracylenes: Doubly N-Doped Cyclopenta-Fused Polycyclic Molecules That Exhibit High Carrier Mobility.

Pyracylene is a unique cyclopenta-fused polycyclic aromatic hydrocarbon (CP-PAH) that exhibits dual aromatic characteristics. Herein we report the synthesis of doubly N-doped benzannulated pyracylenes, namely dibenzodiazapyracylenes, by oxidative N-N linking reaction of [2.2](2,5)pyrrolophane-type precursors. Dibenzodiazapyracylenes displayed well-ordered π-stacked molecular packing in the solid state, which were feasible for effective hole-transporting along the stacking direction. High carrier mobility was estimated by microwave conductivity measurements as compared to dibenzoullazine. The high HOMO level of dibenzodiazapyracylene was verified by electrochemistry and its persistent radical cation species has been detected.

Intramolecular Noncovalent Interaction-Enabled Dopant-Free Hole-Transporting Materials for High-Performance Inverted Perovskite Solar Cells.

Intramolecular noncovalent interactions (INIs) have served as a powerful strategy for accessing organic semiconductors with enhanced charge transport properties. Herein, we apply the INI strategy for developing dopant-free hole-transporting materials (HTMs) by constructing two small-molecular HTMs featuring an INI-integrated backbone for high-performance perovskite solar cells (PVSCs). Upon incorporating noncovalent S⋅⋅⋅O interaction into their simple-structured backbones, the resulting HTMs, BTORA and BTORCNA, showed self-planarized backbones, tuned energy levels, enhanced thermal properties, appropriate film morphology, and effective defect passivation. More importantly, the high film crystallinity enables the materials with substantial hole mobilities, thus rendering them as promising dopant-free HTMs. Consequently, the BTORCNA-based inverted PVSCs delivered a power conversion efficiency of 21.10 % with encouraging long-term device stability, outperforming the devices based on BTRA without S⋅⋅⋅O interaction (18.40 %). This work offers a practical approach to designing charge transporting layers with high intrinsic mobilities for high-performance PVSCs.

Green-Chemistry-Inspired Synthesis of Cyclobutane-Based Hole-Selective Materials for Highly Efficient Perovskite Solar Cells and Modules.

Hybrid lead halide perovskite solar cells (PSCs) have emerged as potential competitors to silicon-based solar cells with an unprecedented increase in power conversion efficiency (PCE), nearing the breakthrough point toward commercialization. However, for hole-transporting materials, it is generally acknowledged that complex structures often create issues such as increased costs and hazardous substances in the synthetic schemes, when translated from the laboratory to manufacture on a large scale. Here, we present cyclobutane-based hole-selective materials synthesized using simple and green-chemistry inspired protocols in order to reduce costs and adverse environmental impact. A series of novel semiconductors with molecularly engineered side arms were successfully applied in perovskite solar cells. V1366-based PSCs feature impressive efficiency of 21 %, along with long-term operational stability under atmospheric environment. Most importantly, we also fabricated perovskite solar modules exhibiting a record efficiency over 19 % with an active area of 30.24 cm2 .

Asymmetrically Substituted 10H,10'H-9,9'-Spirobi[acridine] Derivatives as Hole-Transporting Materials for Perovskite Solar Cells.

Hole-transporting materials (HTMs) based on the 10H, 10'H-9,9'-spirobi [acridine] core (BSA50 and BSA51) were synthesized, and their electronic properties were explored. Experimental and theoretical studies show that the presence of rigid 3,6-dimethoxy-9H-carbazole moieties in BSA 50 brings about improved hole mobility and higher work function compared to bis(4-methoxyphenyl)amine units in BSA51, which increase interfacial hole transportation from perovskite to HTM. As a result, perovskite solar cells (PSCs) based on BSA50 boost power conversion efficiency (PCE) to 22.65 %, and a PSC module using BSA50 HTM exhibits a PCE of 21.35 % (6.5×7 cm) with a Voc of 8.761 V and FF of 79.1 %. The unencapsulated PSCs exhibit superior stability to devices employing spiro-OMeTAD, retaining nearly 90 % of their initial efficiency after 1000 h operation output. This work demonstrates the high potential of molecularly engineered spirobi[acridine] derivatives as HTMs as replacements for spiro-OMeTAD.

Development of Step-Saving Alternative Synthetic Pathways for Functional π-Conjugated Materials.

Synthetic organic chemists endeavor to develop new reaction conditions, improve product yields, and enhance atom economy (synthetic methodologies), whereas the material scientists strive to create novel functional molecules/structures, increase device stabilities, and promote power conversion efficiencies via device engineering (organic optoelectronics). However, these two prominent research fields seem to have no intersections. Since joining national central university in 2012, our research philosophy aims to narrow, or rather to bridge the gap between synthetic methodologies and π-functional organic materials. In contrast to using multistep synthetic approaches based on Suzuki- or Stille coupling reactions, this personal account describes various step-saving and viable synthesis-shortcuts developed by our group, to access thiophene-based small molecules for optoelectronic applications. We expect these succinct and user-friendly alternative pathways designed by synthetic chemists would help material scientists to reach their target molecules in a more step-economical manner.

Novel Donor-Acceptor Based 2-Naphthol Luminophors as Hole-Transporting Materials for Optoelectronics.

Pyrene-perylene (Py-Pery) doped 2-naphthol (2-NP) luminophors (Py-Pery/2-NP) were prepared by conventional solid state reaction method. Excitation energy transfer and electrical properties were studied by fluorimetry and cyclic voltametric (CV) analysis respectively.2-NP acts as an good light emitting matrix. The effect of the donor emission was perceived by changing the dopant and dopant concentrations; this showed that Py-Pery in 2-NP matrix exhibits green emission in the wavelength region 480-550 nm, peaking at 510 nm. Structural properties and thermal stability was studied by XRD, SEM and TGA-DSC. The HOMO and LUMO energy levels were in the range from 5.46-5.48 eV and 2.76-2.77 eV, respectively. An electrochemical band gap estimated was within the range of 2.68-2.72 eV. This study reveals that 2-NP luminophors can be used as a hole-transporting materials used in optoelectronics.

A Coplanar π-Extended Quinoxaline Based Hole-Transporting Material Enabling over 21 % Efficiency for Dopant-Free Perovskite Solar Cells.

Developing dopant-free hole transporting materials (HTMs) is of vital importance for addressing the notorious stability issue of perovskite solar cells (PSCs). However, efficient dopant-free HTMs are scarce. Herein, we improve the performance of dopant-free HTMs featuring with a quinoxaline core via rational π-extension. Upon incorporating rotatable or chemically fixed thienyl substitutes on the pyrazine ring, the resulting molecular HTMs TQ3 and TQ4 show completely different molecular arrangement as well as charge transporting capabilities. Comparing with TQ3, the coplanar π-extended quinoxaline based TQ4 endows enriched intermolecular interactions and stronger π-π stacking, thus achieving a higher hole mobility of 2.08×10-4  cm2 V-1 s-1 . It also shows matched energy levels and high thermal stability for application in PSCs. Planar n-i-p structured PSCs employing dopant-free TQ4 as HTM exhibits power conversion efficiency (PCE) over 21 % with excellent long-term stability.